Addn/ Altn and upgradation of 04 block (48 Qtrs) OR Md Accn at Mahipalpur under GE (South) Delhi Cantt-10

Amount

Roughening surfaces of old concrete floor/wall by picking, sweeping clean and washing down with water to remove dust, etc. and brushing and applying neat cement slurry with 3.0 Kg of cement per square metre, complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 8 to 9 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 8 to 9 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6, complete all as specified and directed.

M&L for backing coat/ plaster 10 mm thick on fair faces of brick work in CM 1:4 surfaces to receive tiles, complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc., laid bedded and pointed in any mortar, complete all as specified and directed.

M&L for granite (of any type) work, 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like on & including 20 mm thick cement screed bed 1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

M&L for Machine cut Pre-polished kota stone slab flooring 18-20 mm thick over 20 mm thick cement screed bed 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and directed.

M&L for machine cut Pre-polished Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar, laid over cement screed 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position, including cutting of reinforcement from adjoining RCC component to facilitate demolition, complete all as specified and directed. Note - Cost of all scaffolding & T&P up to four storey building required for demolition/dismantling of RCC shall be included in quoted rate of this item.

M&L for brick work with sub class `B' bricks, old sized, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6, complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks, old sized, straight or curved on plan to any radius in half thick in CM 1:4 brick wall built in cement mortar, complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for re-fixing, 15 mm bore of pipe, complete all as specified and directed.

All as per item no. 16.00 here in before but 20 mm bore of pipe.

S&F 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and directed.

All as per item no. 18.00 here in before but 20 mm bore of pipe.

Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.

Dismantling water tanks of capacity exceeding 500 litres but not exceeding 1000 litres, complete all as specified and directed.

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (Triple layer, cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed.

S&F Ball brass valves, high pressure, with of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed, complete all as specified and directed.

S&F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore, complete all as specified and directed.

S&F PVC connections 450 mm long with brass unions at both ends suitable for 15 mm bore pipe, complete all as specified and directed.

S&F in repair 15 mm Angle valve/Stop valves, cast copper alloy , chromium plated, fancy type screwed down high pressure with crutch and butter fly handles , screwed with iron pipes or for union, complete all as specified and directed.

S&F in repairs bib tap (quarter turn), brass chromium plated fancy type, long body with flange screwed down, screwed for iron pipe 15 mm bore, complete all as specified and directed.

S&F in repairs pillar tap, brass chromium plated fancy type with capstan heads, screwed down high pressure, screwed for iron pipe 15 mm bore, complete all as specified and directed.

S&F in repairs chromium plated grating with 100 mm dia of approved make including fixing with CM 1:4 to floor/ nahni trap etc., complete all as specified and directed.

S&F in repairs grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gms) etc., complete all as specified and directed.

S&F in repairs brass chromium plated overhead shower rose 125 mm dia, with revolving joint and shower rod fixed to 15 mm bore pipe, complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20 mm dia, 'D' type 60 cm long between flanges of brass CP, complete all as specified and directed.

S&F in repair stainless steel sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm, complete all as specified and directed.

S&F brass chromium plated health faucet along with 1.00 to 1.50 meter good quality SS flexible connection pipe suitable for 15 mm bore pipe, complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) , white fixed in repair, including sheet cover of closed pattern with flat bottom and mild steel chromium plated or aluminiumised hinging device, complete all as specified and directed.

S&F in repair, PVC valve less , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and PVC flush pipe 32 mm dia for low level, complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 x 400 mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames), complete all as specified and directed.

All as per item no. 39.00 here in before but exceeding 1.50 sqm and not exc. 4.00 sqm each, complete all as specified and directed.

Taking down shutter of any description exc. 1.00 sqm but not exc. 2.00 sqm each, complete all as specified and directed.

S&F pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F factory made solid PVC chowkhat/ door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed PVC sheet reinforced with 19 mm x 19mm MS square tube of 19 gauge including rubber gasket, PVC fastners, screws, brackets, and shown on drawing as per SSR part-II (2020), complete all as specified and directed by engineer-in-charge.

S&F factory made solid PVC moulded door shutter, 30mm thick (style), with 2, 4, or 6 raised panel design with 2mm thick wood grain printed moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F 35 mm thick Factory made IInd class hardwood plain, framed panelled shutters (any number of panels) with lock rail and panel of 9 mm BWP commercial ply with commercial veneering on both faces size of rail and stile as per IS-1003 (part) Kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 35 mm thick factory made IInd class hard wood glazed and Skelton shutter (three panels) open rebated and prepared to receive glass/ gauge etc. divided into squares edges of framing plain, chamfered or rounded mitered and rebated sash bar any number with cut or mitered beads for securing glass/ gauge etc. size of members of shutters, complete all as specified and directed.

S&F stainless steel butt hinges, size 100 mm complete all as specified and directed.

S&F Stainless steel barrel tower bolt, 150 mm long and fixed, complete all as specified and directed.

S&F Stainless steel handles, 150 mm size, complete all as specified and directed.

S&F Stainless steel sliding door bolts of 250 mm long with hasp, staple (bolt type) fixing clips of sheet cast , fixing bolts , complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint, complete all as specified and directed.

M&L for powder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5 mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section (two shutter glazed, covering half of span of opening each & one shutter Skelton covering half of span of opening ) incl provn for making windows air tight, including 95 mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with steel wire staples 5 mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads, complete all as specified and directed. (Note Measurement shall be taken clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and nothing extra shall be paid separately.

S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5 mm x 38.10 mm x 1.5 mm thick, shutter with section 47.62 mm x 44.45 mm x 1.5 mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc. including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples including necessary fittings/fixture /aluminum snap beads, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint, complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed.

M&L for 18mm thick wood plastic composite (WPC) board, fixed with screws as in cupboard/ wardrobe/ almirah shutter/ kitchen cabinet including all necessary fittings and fixtures like nickle plated clip hinges, knobs etc complete all as specified and directed. Note: (a) Pattern & design of WPC board to be decided by GE. (b) Items like cupboard knobs, and CP plate clip hinges deemed to be included in the quoted rate.

S&F in repair drapery curtain rods, stainless steel 25 mm dia of approved quality with decorative wooden finish and two number brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod including 8 Nos (min) match up rings per meter etc., complete all as specified and directed.

Dismantling wrought iron or mild steel/ cast iron work of any description, complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165, complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.63 mm nominal dia or wire and average width or aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples to doors/steel windows, complete all as specified and directed.

M&L for welding in repairs exc 2.5 cm but not exc. 5.0 cm in length thickness of metal be welded exc 6 mm but n.exc 9 mm, complete all as specified and directed.

S&F Stainless steel peg set of five, fixing on wall, complete all as specified and directed.

S&F in repair kitchen plate rack with four shelves made out of stainless steel sheet 1 mm thick overall size 750 mm x 750 mm x 250 mm, complete all as specified and directed.

S&F in repair Stainless steel barrel tower bolts, 150 mm long, complete all as specified and directed.

S&F in repair Stainless steel handles, 150 mm size, complete all as specified and directed.

S&F in repair Stainless steel sliding door bolts of 250 mm long with hasp, staple (bolt type) fixing clips of sheet cast , fixing bolts , complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 15mm thick rendering with ready mix plaster on faces of brick or concrete surface, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering with ready mix plaster on brick or concrete surfaces finished even and smooth without using extra cement mixed with by adding permeability reducing polymer @ 250g/sqm (6%) by weight of cementitious content at time of mixing with water as per manufacturer's recommendations including all levelling the surface, curing etc, complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying two coats of distemper oil emulssion, white or tinted over one coat of primer, complete all as specified and directed .

M&L for providing and applying a bond coat of Latex in the ratio 1:4:6 (1 Latex: 4 Water : 6 cement) with latex consumption @100g/sqm on the brick wall surface by brush as per manufacturer's recommendations including curing, complete all as specified and directed .

Expose the first joint of masonry structure at ground level horizontally. The plaster must be knocked off at least 50 cm beyond the visibly penetrated area. Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm. Drilling Holes: Drilling holes 10mm diameter in masonary structure along the side of the joint at 45° angle so as to cross the brick/block at the intervals spacing if 15-30cm depending on extent of rising dampness as per recommendation of engineer in charge. Cleaning of holes: Clean the holes by air blower prior to fixing nozzles. Install Packer injection packers 9.8mm diameter, 10cm long in the holes and tighten. Fix the packer securely using Sikadur 31. Cutting of Packers: Cut the packers after completion of grouting without damaging structural elements.

Supply and application of a 3 part, very low viscous, elastic polyacrylic injection resin Injection 306 with a versatile and adjustable reaction time having Mixed viscosity : 3-11 M.pa.s at +20 Deg C, Reaction time : adjustable according to ambient temperatrure and execution requirement between 8-50 mins, pH – 9-10, Testing: Required testing shall be done as per Wissbau No. 2002-094-(1A) – Function test with re-injectible hose system. The holes should be drilled until a depth of approx 5 cm (for a 6cm thick wall) before the end of the wall is reached. Pump Injection-306 at >20 bar into or behind fissures or into masonry joint which are allowing water to infiltrate into unwanted areas. If voids in masonry being injected contain insufficient moisture to activate the grout inject a small amount of water prior to injecting the grout. When movement stops or Injection-306 appears at the next packer move to the next packer and inject. If the dampness is heavy, inject similarly at next joint line, complete all as specified and directed by engineer-in-charge. Note:- Cost of testing is included in quoted rate for this item

M&L for 10mm thick rendering with ready mix plaster on concrete surfaces of ceiling, chajja,etc finished even and smooth, complete all as specified and directed .

M&L for preparation of newly plastered surfaces of wall and applying wall care putty in two layers on whole wall surface to achieve smooth, even and uniform surface including grinding with sand paper and levelling of surface and applying two coat of oil bound distemper on white or tinted over existing prepared putty base surface, complete all as specified and directed .

M&L for preparation of newly plastered surfaces of walls and applying two coat of cement based paint, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white wash, complete all as specified and directed.

M&L for complete removal of existing treatment from internal surfaces of wall by electrically operated grinder, washing and applying wall care putty in two layers on whole wall surface to achieve smooth, even & uniform surface including grinding with sand paper and levelling the surface and than applying two coat of oil bound distemper on white or tinted surface over existing prepared putty based surface, complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying two coats of white wash, complete all as specified and directed.

M&L for preparation of old surface of ceiling and applying one coat of white wash, complete all as specified and directed.

Cutting of vegitation/plant (girth not exceeding 300 mm) from roof, terrace, chajjas etc. digging out the roots and making good the surface in PCC 1:2:4 type B1 with surfaces finished to match complete including scaffolding etc., complete all as specified and directed.

Dismantling of brick tiles (laid flat or on edge) on roof surface, laid bedded and pointed in any type of mortar, complete all as specified and directed.

Demolition of mud in roof, any thickness, including plastering and leeping up to two storey bldg. including necessary scaffolding arrangement complete (whether full thickness removed or only a part there of) and removing rubbish from cantonment area or as directed, complete all as specified and directed.

M&L for cutting out cracks to V-section in existing roof or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3, complete all as specified and directed.

M&L for roof treatment in following stages, complete all as specified and directed. (i) Preparation of concrete surfaces by wire brush and cleaned top surfaces of cement concrete . (ii) PCC type B-0, 1:2:4 (12.5 mm graded aggregate) to maintain slop with average thick of 40 mm as on roof. (iii) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 Kg per sqm including cleaning surfaces. (iv) APP polymeric water proofing membrane minimum 3 mm thick and weighing not less than 3.0 Kg per Sqm , black finish reinforced with non woven polyester matt(wt. not less than 150 gms/sqm) with a thermo fusible finish laid over bitumen primer @ 0.5 Kg/Sqm by torching application with a propane or a butane gas torch with an overlap of 100 mm at the sides and 150 mm at the ends, as per manufacturers instructions incl preparation of surface complete all as specified and directed.

M&L for cement concrete tiles 20 cm x 20 cm x 20 mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors, and cut and polished laid over 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for cement concrete type B1 - 1:2:4 (using 20 mm graded stone aggregate) in roof kerbs or mud stop rounded or chamfered on edge etc., complete all as specified and directed.

Demolition of Cement concrete of any description and in any position, complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, complete all as specified and directed.

S&F 110 mm dia UPVC pipes Type 'B', single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed by engineer-in-charge.

S&F 75 mm dia UPVC pipes Type 'B', single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed by engineer-in-charge.

S&F 75mm UPVC (SWR) bends type ‘B’ (any radius), complete all as specified and directed by engineer-in-charge.

S&F 110mm UPVC (SWR) bends type ‘B’ (any radius), complete all as specified and directed by engineer-in-charge.

S&F in repair UPVC ‘P’ or ‘S’ trap including jointing with solvent cement, dia of outlet 110mm, complete all as specified and directed by engineer-in-charge.

S&F 75mm UPVC (SWR) branch piece, single (single Y) equal or unequal provided with oval access doors, complete all as specified and directed by engineer-in-charge.

S&F in repair UPVC floor/ nahani trap including jointing with solvent cement, dia of outlet 75mm, complete all as specified and directed by engineer-in-charge.

S&F in repairs 125 mm x 100 mm salt glazed stone ware gully traps square & round mouthered trap 'P' including case iron grating and fixed, including necessary excavation and earthwork, concrete in bed, surrounds, kerbs etc., and jointing to drains in CM 1:1, complete all as specified and directed.

Taking down rain water pipe (any size) or pattern incl all fittings, head shoes, bends swan necks etc. incl cleaning or re-fixing or removal to store (measured overall as fixed along the centre line over fittings and accessories, complete all as specified and directed.

S&F 110 mm UPVC pipes Type 'A', single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to walls, complete all as specified and directed .

S&F 110mm UPVC (SWR) bends/ Tee type ‘A’ (any radius), complete all as specified and directed .

S&F holder bat clamps 110 mm dia made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

All as per item no. 104.00 here in before but for 75 mm bore, complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including mixture of bitumen and sand 1:3 by weight, complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base, complete all as specified and directed.

M&L for 60mm thickness machine pressed pre-cast concrete interlocking paver block any size and shape confirming to IS 15658-2006, M-30 grade with grey cement and no pigment, laid over 40mm thick sand cushion and including joints filled with sand, complete all as specified and directed.

S&F stainless steel wire cloth, 0.63mm nominal dia or wire and average width or aperature 1.40mm, fixed with tinned tacks or galvanized wire staples to doors/steel windows, complete all as specified and directed.

M&L for chipping of spalled and loose concrete and cleaning rust from reinforcement by sand blasting, scrubbing down concrete surfaces with wire brushes cleaning with water allowed to dry applying a layer of zinc rich epoxy primer as anti rust on all exposed reinforcement followed by a layer of bonding coat of a layer of epoxy adhesive on complete exposed surfaces of concrete and provide gunniting in two layers over steel welded mesh 2 mm dia of wire and total aperture 75 mm, thickness of gunite n.exc 25 mm thick (average thickness) using cement mortar 1 :2 with OPC 43 grade cement mixed with polycrete admixture @ 2 % by weight of cement or as per manufactures instructions and finally applying cement plaster over gunite surfaces of required thickness to give an even uniform and smooth finish conforming to proper geometrics in cement mortar 1:4 to match with the existing surface as in side and soffits of slabs, chajjas, fins, facias, parapets, columns and beams etc complete including necessary scaffolding , shuttering necessary chased to brick work or RCC members at any height upto full height of buildings including removing of small trees shrubs etc complete all as specified and directed. (Note: Steel mesh to be welded with the existing reinforcement. The cost of welded mesh is deemed to be included in the unit rate quoted.)

M&L for udaipur green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F 110mm UPVC (SWR) branch piece, single (single Y) equal or unequal provided with oval access doors, complete all as specified and directed.

M&L for providing and injecting chemical chlorpyrifos emulsifiable for post constructional anti termite treatment along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes, complete all as specified and directed.

M&L for anti termite treatment of soil under existing floors using chemical chlorpyrifog emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar (1:2) to match the existing floors, complete all as specified and directed.

S&F 6mm thick glass corner shelf fancy type with railing and fittings complete of size 25cm x 25cm of best quality (as per sample approved by Engr-in-charge), complete all as specified and directed.

S&F brass chromium plated soap dish 150mmx150mm, of any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

Taking down carefully the old U/S Aluminium / Copper point wiring (light, fan, socket or power) complete fitting such as switches, ceiling roses, pendants, sockets, regulators, etc. and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area i.e. with OBD/colour wash/white wash as the existing finish complete all as specified and directed.

M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in & including concealed PVC conduit and including replacement of unserviceable pressed steel terminal boxes of required size with top cover 3 mm thick plastic/laminated sheet of required colour with screwed and cup washer with all accessories including 1.5 Sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified for One light/Fan/bell point controlled by one switch 5 Amps one way using cable and making good to disturbed surface of walls including necessary touch up with through adjoining surface of disturbed area i.e. with OBD/colour work/white wash as existing finishes complete all as specified and directed . Note :- The rate is inclusive cutting/chasing and making good disturbed surface with CM 1:3 and same surface finishes with the adjoining surface of disturbed area with OBD/Colour wash/white wash complete.

All as per item No 119.00 here-in-before but One 3 pin socket outlet, 5/6 Amps, on independent board all as specified and directed.

All as per item No. 119.00 here-in-before but 5 Amp socket outlet on same board all as specified and directed.

All as Item No. 119.00 here-in-before but for one socket outlet 5/15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing all as specified and directed.

All as Item No. 119.00 here-in-before but for one light point controlled by two 2-way switches with cable 1.5 Sqmm size.

S & F switch piano flush type 5/6 Amps SP one way complete all as specified & directed.

S & F switch piano flush type 5/6 Amps SP 2 way complete all as specified & directed.

S & F socket outlet 2-in-1, 5/6 Amps flush mounted 5 pin multi purpose complete all as specified & directed.

S & F switch piano type 15/16 Amps SP one way complete all as specified & directed.

S & F universal socket outlet 2-in-1 (multipurpose) 5 pin 6/16 Amps flush mounted type complete all as specified & directed.

S & F bell push, flush type 5/6 Amps all as specified and directed.

S & F ceiling rose surface Bakelite 65x25 mm two to three terminals complete all as specified & directed.

S&F in replacement, decorative wall light mounting suitable for LED lamp upto 15 Watt complete with all connections all as specified & directed.

S&F Surface mounting round shaped LED down lighter with durable housing with Al heat shrink with diffuser to give glare free light 6 Watt LED 6000K/6500K lamp type in replacement of old unsv existing light fitting any type from ceiling of stairs/common areas, complete all as specified & directed.

S&F Wall mounted LED Integrated Batten T5 20 Watt - 4 Ft White, indoor decorative PVC extruded T5 LED batten-Integrated type in replacement of old unsv existing 36/40 Watt FTL fittings any type, complete all as specified & directed.

S&F Wall mounted LED Integrated Batten T5 10 Watt-2 Ft White, indoor decorative PVC extruded T5 LED batten -integrated type in replacement of old unsv existing 18/14 Watt FTL fittings any type, complete all as specified & directed.

S&F in replacement LED 12 Watt LED Bulb complete all as specified and directed.

S&F in replacement 10 LED bulk head in engineering plastic housing with clear prismatic diffuser, 10 W WHITE in replacement of old unsv bulk head/Sketch/LF fitting including all accessories connecting up twin core flexible copper conductor cable complete all as specified & directed.

S&F in replacement of building security light fitting 30 W LED 5000K new Powder coated pressure die cast aluminium compact LED Street light including size of bracket for mounting building security light duly fixed with clamps, nut, bolts & washers etc. complete all as specified & directed.

S&F of electric bell Ding Dong type AC, 230 volts single phase complete all as specified & directed.

S & F 0-4 step type electronic regulators for ceiling fan 1200 mm sweep, 240 V complete all as specified & directed.

S&F BLDC (Brush less Direct Current) Ceiling Fan 1200 mm Sweep, not less than 350 RPM having air delivery 215 Cum, high air flow with silence operation, with fully copper winded motor & ribbed 3 Nos A/M blades. The BLDC motor fan shall have 100% rust free blades. The fan shall be BEE 5 Star rating and compliant with IS 374 and making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan complete all as specified and directed including taking down old ceiling fan and depositing to MES store yard.

S&F in replacement of VTPN DB 6 way double door, vertical type for fixing MCCB up to 200 Amps as incomer and MCBs as out goings with metal door and IP 43 Protections and connecting complete all as specified & directed.

S&F in replacement of sheet metal enclosures double door for DBs when MCBs to be used SPN-8 Way, 240 V with 200 Amp rated bus bar complete all as specified & directed.

S&F in replacement of MCCB 3 Pole .415 V. fixed type, 160 Amps with breaking capacity 36kA all as directed complete all as specified & directed.

S&F in replacement MCB SPN 32 Amps 'C' series, breaking capacity 10 Ka, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc. complete all as specified & directed.

S&F for MCB SP 6 to 32 Amps 240 Volts, 10 kA, `C' curve all as per site requirement and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to GI wire 4 mm as earthing lead by means of nut, bolts and check nuts and washers, GI light grade protection pipe 15 mm dia up to 7.5 m, GI watering pipe 20 mm dia medium grade, RCC cover with funnel, excavation in any type of soil, PCC pit charcoal, salt all as shown in electrical plate No 3 of SSR Part I including earth test point , all as specified or indicated including testing on completion.

Taking down and re-fixing single phase static energy meter in meter box complete and mounting on existing wall surface including necessary connections of incoming and out going cables all as specified and directed.

S&F in replacement Sheet metal enclosure factory made, powder coated of size 300 x 250 x 150 mm suitable for mounting Single phase electric meter fabricated from 2 mm thick CRCA sheet with anti corrosive dust and vermin proof complete all as specified and directed. Note:- The meter cover shall have a fully transparent window. The window shall be of transparent, high grade UV stabilized engineering plastic for easy reading of all the displayed values/parameters and observation of operation indicator, the window shall preferably be an integral part of meter cover.

Taking down unserviceable Sub main wiring twin core of any size complete and making good disturbed surface complete all as specified and directed.

S&F Inverter based LED Batten 20Watt- 4 feet, white, indoor decorative integrated type in replacement of old unsv existing downlighter any type in common area, complete all as specified and directed.

M&L for Sub Main wiring using single run PVC FRLS grade Insulated unsheathed, multistrand copper conductor cable 2 runs of 6 Sqmm for phase and neutral and 1 run of 6 Sqmm for earth wire drawn through & including concealed PVC conduit wiring in wall not less than 25 mm dia with all fittings like tees, bends, junction/ terminal boxes etc. as per site requirement and all as directed. Note:- Phase should be of Red /Yellow/Blue, neutral should be of back and earthing wire should be of green colour. 2. Two runs of cable for phase/ neutral , 1 run for earth lead & PVC conduit will be measured and paid as unit length).

M/S Chhavi Constructions Co

Shivom Projects Private limited

Bluemax Associate