Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.3 LAdmitted-Finance | -35.21% | ₹1.3 L | L1 | Admitted-Finance |
| 2 | L2₹1.3 LAdmitted-Finance | -32.11% | ₹1.3 L | L2 | Admitted-Finance |
| 3 | L3₹1.5 LAdmitted-Finance | -21.80% | ₹1.5 L | L3 | Admitted-Finance |
Tender Value
₹75 L
EMD Value
₹1.5 L
Closing Date
21 Apr 2026, 6:00 pmClosed
Executive Engineer
EE PHED Div Lakshmangarh opposite Manasi Head Works
Comissioning of 200mm dia. TW including mechanical, electrical instrumentation works and also providing, laying and jointing (PLJ) of HDPE pipe line as rising main complete work in urban/ rural areas under jurisdiction of PHED, Dn. Lakshmangarh
2026_PHCJA_549423_1
NIT-69/2025-26
Open Tender
Civil Works - Water Works
365 days
Lakshmangarh
As per conditions mentioned in TD
2 documents required · 2 mandatory
₹1,000
32138-EE PHED Div Laxmangarh
₹1.5 L
Yes
13 May 2026
14 Apr 2026
22 Apr 2026
15 Apr 2026
21 Apr 2026
15 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100 mm wide shroud around the edge so as to form a cap on the topend of casing pipe with GI Nipple 45cm long & two GI flanges at both end in 80mm sizes passing through a hole in the centre of MS sheet. A 25mm socket with end plug shall also be welded over top plate . A GI nipple having outside thread of size 1/2" (for installation pressure gauge) shall tie provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug.(200 mm Dia) | ||||||
| 2Supply & Fixing of ISi marked three core PVC flat submersible cable as per IS 694: 1990 or amended up to date and conductor as per class 5 of IS 8 130: 1980 includ ing making connection etc. 3 core 4.0 mm2 | ||||||
| 3Providing & Lowering in tubewell ISl marked GI Pipe "B" (medium)class as per IS: 1239 Part 1 2004 or amended up to date threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. 50mm dia | ||||||
| 4Providing & Fixing of double flanged, Cl body, ISi marked NR V of approved make of following sizes 65mm dia | ||||||
| 5Supply and Fixing of electric Contro feeder panel ( comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventor, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. The panel should have space for energy meter (supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 guage M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg's length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form.The size of CC plateform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply. | ||||||
| 5.1 | Above 5 HP and up to 10 HP | - | Each | - | - | BI01010001010000000000000515BI0100001123 |
| 5.2 | Above 10 HP and up to 15 HP | - | Each | - | - | BI01010001010000000000000515BI0100001124 |
| 5.3 | Above 15 HP and up to 20 HP | - | Each | - | - | BI01010001010000000000000515BI0100001125 |
| 6Supply and installation of 3 phase ISI markjed submersible mtor pump set of five star rating by BEE and as per IS : 8034-2018(Pump) and IS 9283-2013(Motor) or amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/ DCB .The job incxludes llowering of motor pump. instalation of complete fitting and accessories jointing of electrical cables upto switch board testing of submersible pump set and interconnection upto water mains complete in all respect. | ||||||
| 6.1 | Up to 5.5 KW (7.5 HP) & head up to 120 mtr. | - | KW | - | - | BI01010001010000000000000515BI0100001127 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.53 MB
TD69Final.pdf
Tender Documents • 1.96 MB
BOQ_979447.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid