REPAIR OF WOODEN FURNITURE AND RECANNING OF CHAIRS ISSUED TO OTM AND MD ACCN UNDER GE (EAST) LUCKNOW

Amount

BED PLY TOP (FD-246/ 247 ) S&F12mm thick plywood BWR Grade, approved quality in single piece as per drawing without any joint to the bed frame with suitable screws wood/steel with cup washer including removal of damaged ply wood all as shown on drawig, specified and directed.

S&F in repairs to 1st quality teak wood long rail as per existing size of Bed including removal of damaged long rail all as shown on drawig, specified and directed. (Each long rail will be measured as single unit)

All as per item No. 1.02 above but short rail all as shown on drawig, specified and directed. (Each short rail will be measured as single unit)

S&F in reapirs to head board consisting of 60 x 30 x 260mm vertical size and 30 x 60 x 400mm horizontal including legs of size 60 x 60mm in section at top and length 400mm from bottom of leg and 30 x 30mm in section at bottom complete including removal of damaged head board all as shown on drawig, specified and directed.

All as per item No. 1.4 above , but foot board consisting of 22 x 75mm in section teak battens 3 Nos at equal space, joining top and bottom horizontal rails of foot board. The top and bottom horizontal rails of size 30 x 60mm shall be 1st quality of teak wood. The vertical legs above horizontal rails shall be 30 x 60mm all as shown on drawig, specified and directed.

S&F in reapirs to new 1st quality teak wood stiffeners of size 40 x 60mm complete including removal of damaged stiffiners all as shown on drawig, specified and directed.

S&F in reapirs to 4mm thick OST plywood commercial of size 780 x 340mm including 12mm dia half round teak wood beading of both side of head board including removal of damaged ply all as shown on drawig, specified and directed.

S&F in reapirs to 4mm thick OST plywood commercial of size 780 x 180mm including 12mm dia half round teak wood beading of both side of foot board including removal of damaged ply all as shown on drawig, specified and directed.

S&F in repairs to flat iron of mild steel of size 35mm x 5mm, bents to right angle on each corners of Bed ply top all as shown on drawig, specified and directed.

Chair dining (FD-228, FD-279 or Similar) Removing the existing unserviceable rear leg and providing with new teak wood rear leg complete all as shown on drawig, specified and directed.

Removing the existing unserviceable front leg and providing with new teak wood front leg all as shown on drawig, specified and directed.

Removing the existing unserviceable back rest and providing new teak wood back rest slightly curved all as shown on drawig, specified and directed.

Removing the existing unserviceable front rail and providing new teak wood front rail drilling holes at 12.5 mm C/C all as shown on drawig, specified and directed.

Removing the existing unserviceable rear rail providng new teak wood rear rail including drilling holes at 12.5 mm C/Call as shown on drawig, specified and directed.

Removing the existing unserviceable side rails and providing new teak wood side rails including drilling holes at 12.5mm C/C all as shown on drawig, specified and directed.

Recaning of repaired chair dining with best quality of approved plastic cane 1.80 x0.46mm and border with 3x0.60mm cane of white or cream ivory all as shown on drawig, specified and directed.

Chair writing (FD-202, FD-250, FD-280 or similar) Removing the existing unserviceable rear leg and providing with new teak wood rear leg all as shown on drawig, specified and directed.

Removing the existing unserviceable front leg and providing with new teak wood front leg all as shown on drawig, specified and directed.

Removing the existing unserviceable back rest and providing new teak wood back rest slightly curved all as shown on drawig, specified and directed.

Removing the existing unserviceable front rail and providing new teak wood front rail drilling holes at 12.5 mm C/C all as shown on drawig, specified and directed.

Removing the existing unserviceable rear rail providng new teak wood rear rail including drilling holes at 12.5 mm C/C all as shown on drawig, specified and directed.

Removing the existing unserviceable side rails and providing new teak wood side rails including drilling holes at 12.5mm C/C all as shown on drawig, specified and directed.

Removing the existing unserviceable broken arm rest and providing new teak wood arm rest all as shown on drawig, specified and directed.

Recaning of repaired chair writing with best quality of approved plastic cane 1.80 x0.46mm cane and border with 3x0.60mm cane of white or cream/ivory all as shown on drawig, specified and directed.

CHAIR EASY (FD-203,FD-229 or similar) Removing the existing unserviceable rear leg and providing with new teak wood rear leg all as shown on drawig, specified and directed.

Removing the existing unserviceable front leg and providing with new teak wood front leg all as shown on drawig, specified and directed.

Removing the existing unserviceable broken arm rest and providing new teak wood arm rest all as shown on drawig, specified and directed.

Removing the existing unserviceable front frame and providing new teak wood front frame including drilling holes @ 12.5 mm C/C all as shown on drawig, specified and directed.

Removing the existing unserviceable front/back rail and providing new teak wood front rail all as shown on drawig, specified and directed.

Removing the existing unserviceable side rails and providing new teak wood side rails all as shown on drawig, specified and directed.

Recaning of repaired chair easy seat and back of approved quality white or cream ivory with 1.80 x 0.46 mm cane and border with 3x0.60 mm caneall as shown on drawig, specified and directed.

CHAIR WOODEN BOTTOM WITHOUT ARMS (FD-285,225 or similar type) Removing of existing unserviceable seat and provide new seat made out of 6mm thick plywood commercial to Chair wooden bottom with wood/steel screws, all as shown on drawig, specified and directed.

Removing the existing unserviceable rear leg and providing with new teak wood rear leg complete all as shown on drawig, specified and directed.

Removing the existing unserviceable front leg and providing with new teak wood front leg complete all as shown on drawig, specified and directed .

Removing the existing unserviceable side rails and fixing new teak wood side rails complete all as shown on drawig, specified and directed .

Removing the existing unserviceable front rail and fixing new teak wood front rail complete all as shown on drawig, specified and directed .

Removing the existing unserviceable rear rail fixing new teak wood rear rail complete all as shown on drawig, specified and directed .

Removing the existing unserviceable back rest and providing new teak wood back rest slightly curved complete all as shown on drawig, specified and directed .

COMMON FOR ALL CHAIRS Removing the existing unserviceable stiffeners and providing new stiffners made out of 1st class seasoned teak wood stiffeners all as shown on drawig, specified and directed.

Stool Dressing CB (FD-282 or similar) Recaning of Stool dressing with best quality of approved plastic cane half round 2mm wide and 0.4mm thick plastic cane of white or cream ivory all as shown on drawig, specified and directed.

M & L for fixing of PVC shoes( Chair Easy, Chair Dining, Chair Writing & Stool Dressing CB.) superior quality of 25mmx25mm dia with 30mm long screws all as shown on drawig, specified and directed.

Book Case (FD-237) Removing the existing unserviceable shutter and providing new shutter made out of 18mm thick prelaminated particle board exterior grade and providing teak wood beading all around including Hinges and lock all as shown on drawig, specified and directed.

Removing the existing unserviceable back of book case and providing new Back with 6mm thick plywood commercial type of all as shown on drawig, specified and directed.

BIN SOILED LINEN SMALL (750mm x 45mm x 450mm) FD-244 M&L for the following damaged/ broken parts and supply & fixing in repair of Bin Soiled linen using with the material all as shown on drawig, specified and directed. Replacement of unservicable Top S& F in repairs new top made of 18 mm thick prelaminated particle board exterior grade one side teak faced providind 4mm thick teak wood beading all around rest all as shown on drawig, specified and directed.

Removing the existing unserviceable front of bin linen small and providing new front with 6mm thick teak faced vineer of approved make all as shown on drawig, specified and directed.

Removing the existing unserviceable back of bin linen small and providing new Back with 6mm thick commercial ply of approved make all as shown on drawig, specified and directed.

Hat Stand with mirror (FD-233) S & Fixed in repairs new mirror 5 mm thick for Hat stand with mirror of approved make with complete frame back all as shown on drawig, specified and directed.

Removing of existing unserviceable Back of Hat stand with mirror and providing new Back of 6mm plywood commercial shall be fixed with headless nail, rest all as shown on drawig, specified and directed.

S&F of brass pegs with brass screw in place of broken/ lost pegs in hat stand with mirror, rest all as shown on drawig, specified and directed.

SIDE BOARD (FD-241,FD-1112) Removing the existing unserviceable top of side board and providing new top made out of 18mm thick prelaminated particle board exterior grade all as shown on drawig, specified and directed.

Removing the existing unserviceable sides of side board and providing new sides made out of 18mm thick prelaminated particle board exterior grade all as shown on drawig, specified and directed. (Note : Each side will be measured as single unit)

Removing he existing unserviceable back of Side Board and providing new Back with 6mm thick plywood commercial type of all as shown on drawig, specified and directed.

Removing the existing unserviceable Top drawer and providing New drawer made out of 12 mm thick particle board having ply on both sides. The drawer shall be run as 19 mm x 19 mm thick teak wood batten all as specified on drawing all as shown on drawig, specified and directed.

Removing the existing unserviceable Drawers (other than Top drawers) and providing new drawer made out of 12mm thick particle board having ply on both sides. The drawer shall be run as 19mm x 19mm thick teak wood bearer all as specified on drawing all as shown on drawig, specified and directed. (Note : Each drawer will be measured as single unit)

Removing the existing unserviceable shutter and providing new shutter made out of 18mm thick prelaminated particle board exterior grade including Hinges and lock all as specified on drawing all as shown on drawig, specified and directed. (Note : Each shutter will be measured as single unit)

Removing the existing unserviceable bottom of side board and providing new bottom of size 1220 x 455 mm made out of 18mm thick plywood commercial type all as specified on drawing all as shown on drawig, specified and directed.

Removing the existing unserviceable leg frame of side board and providing teak wood 2nd class hard wood leg frame all as shown on drawig, specified and directed.

Removing the existing unserviceable broken legs of side board and providing new teak wood leg 2nd class hard wood of size 45 x 45 x 125 mm but at bottom 25 x 25 mm all as specified on drawing all as shown on drawig, specified and directed. (Note : Each leg will be measured as single unit.)

Replacement of unserviceable hinges 75mm long piano type.

S & Fixed in repairs locking device of brass 6 lever locks iron body with duplicate keys chromium plated all as specified on drawing all as shown on drawig, specified and directed. (Note :- All parts as mentioned above includes 3mm thick teak wood edging duly polished wherever applied necessary as per drawing).

Table dining 8 persons (FD-273) Replacement of existing unserviceable table top for Table dining 8 persons made out of particle board 18mm thick exterior grade duly post formed with 0.6 mm thick laminate in Mahogini /Walnbut colour with 18x2mm thick PVC edging of make Rehau /Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adheshive through hot pressed machine all as specified on drawing all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged legs from Table dining 8 persons made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged side short rails from Table dining 8 persons made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged front/back long rails from Table dining 8 persons made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

Table dining 6 persons (FD-273) Replacement of existing unserviceable table top for Table dining 6 persons made out of particle board 18mm thick exterior grade duly post formed with 0.6 mm thick laminate in Mahogini /Walnbut colour with 18x2mm thick PVC edging of make Rehau /Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adheshive through hot pressed machine all as specified on drawing all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged legs from Table dining 6 persons made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged side short rails from Table dining 6 persons made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged front/back long rails from Table dining 6 persons made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

Common for Table dining 8/6 persons S&F in repairs Triangular wooden bracket 100X100X20mm thick for all types of tables between leg & stiffners for extra strength complete, rest all as shown on drawig, specified and directed.

TABLE WITHOUT DRAWER 900x 600 x 760mm (FD-231,284) Removing of existing unserviceable table top for Table without drawer 900 x 600 x 760mm and providing new table top made out of 18mm thick prelaminated particle board with teak wood facing one side and balancing white on the other side of exterior grade and 18x4 mm teak wood beading on all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged legs from Table without drawer 900x600x760mm made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged side short rails from Table without drawer 900x600x760mm made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged front long rails from Table without drawer 900x600x760mm made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from Table without drawer 900x600x760mm made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

TABLE WITH DRAWER 900x 600 x 760mm (FD-224,283) Removing of existing unserviceable table top for Table with drawer 900 x 600 x 760mm and providing new table top made out of particle board 18mm thick exterior grade duly post formed with 0.6 mm thick laminate in Mahogini /Walnbut colour with 18x2mm thick PVC edging of make Rehau /Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adheshive through hot pressed machine all as specified on drawing all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged legs from Table with drawer 900x600x760mm made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged side short rails from Table without drawer 900x600x760mm made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged front long rails from Table with drawer 900x600x760mm made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from Table with drawer 900x600x760mm made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged drawers from Table with drawer 900x600x760mm made out of first class hard wood (teak) including providing 6mm thk commercial ply to bottom of drawer complete, rest all as shown on drawig, specified and directed.

TABLE 900x 900mm (FD-291) Removing of existing unserviceable table top for Table 900 x 900mm and providing new table top made out of particle board 18mm thick exterior grade duly post formed with 0.6 mm thick laminate in Mahogini /Walnbut colour with 18x2mm thick PVC edging of make Rehau /Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adheshive through hot pressed machine all as specified on drawing all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged legs from Table 900x900mm made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged side short rails from Table 900x900mm made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from Table 900x900mm made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

TABLE 1200x 900mm (FD-273) Removing of existing unserviceable table top for Table 1200 x 900mm and providing new table top made out of particle board 18mm thick exterior grade duly post formed with 0.6 mm thick laminate in Mahogini /Walnbut colour with 18x2mm thick PVC edging of make Rehau /Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adheshive through hot pressed machine all as specified on drawing all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged legs from Table 1200x900mm made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged side short rails from Table 1200x900mm made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged front long rails from Table 1200x900mm made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from Table 1200x900mm made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

Common for all type of tables S&F in repairs Triangular wooden bracket 100X100X20mm thick for all types of tables between leg & stiffners for extra strength complete, rest all as shown on drawig, specified and directed.

Teapoy (FD-278, 34, 382) Replacement of existing unserviceable table top for teapoy made out of particle board 18mm thick exterior grade duly post formed with 0.6 mm thick laminate in Mahogini /Walnbut colour with 18x2mm thick PVC edging of make Rehau /Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adheshive through hot pressed machine all as specified on drawing all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged legs from teapoy made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from teapoy made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

Table Centre (FD-274 / 235) Replacement of existing unserviceable table top for Table centre made out of particle board 18mm thick exterior grade duly post formed with 0.6 mm thick laminate in Mahogini /Walnbut colour with 18x2mm thick PVC edging of make Rehau /Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adheshive through hot pressed machine all as specified on drawing all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged legs from Table centre made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from table centre made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

Table Writing/Medium/Study (FD-33,275, ) Table top with made out of particle board 18mm thick exterior grade duly post formed with 0.6 mm thick laminate in Mahogini /Walnbut colour with 18x2mm thick PVC edging of make Rehau /Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adheshive through hot pressed machine all as specified on drawing all as shown on drawig, specified and directed.

Legs as per drg

Foot rest as per drg

Stiffener as per drg

Sides of cabinet with 18mm thick pre-laminated particle board as per drg

18mm thick prelaminated particle board Cabiner door & drawer along with locking arrangement and handles as per drg

TABLE PEG (FD-236, FD-277) Replacement of existing unserviceable table top for Table peg made out of particle board 18mm thick exterior grade duly post formed with 0.6 mm thick laminate in Mahogini /Walnbut colour with 18x2mm thick PVC edging of make Rehau /Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adheshive through hot pressed machine all as specified on drawing all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged legs from Table peg made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged top rail from table peg made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

S&F in repairs to unserviceable damaged bottom rail from table peg made out of first class hard wood (teak) complete, rest all as shown on drawig, specified and directed.

TABLE BED SIDE Taking out old ply from the back of table bed side and S&F new back ply 6mm thick commercial BWP ISI mark of the same shape and size of the existing table bed side aqll all as shown on drawig, specified and directed.

Taking out old unserviceable top of table bed side and S&F new top of particle board 18/19 (Novapan/Nepal Board) of required as per existing drawing including 4mm thick teak wood beading all round all as shown on drawig, specified and directed.

Opening out old unserviceable shelf and S&F new shelf made out of 12 mm thick ply wood commercial BWP ISI mark of size and shape including 4mm thick teak wood beading all round all as shown on drawig, specified and directed.

TABLE DRESSING GENTS WITH MIRROR (FD-230) Replacement of existing unserviceable drawer for Table dressing gents made out of prelaminated particles board exterior grade 12mm thick one side teak facing and balancing white on the other side and 12x12mm wooden beading around all as shown on drawig, specified and directed. Note-Each drawer should be measured as single unit

S & Fixed in repairs new mirror 5mm thick of approved make with full frame all as shown on drawig, specified and directed.

S & Fixed in repairs new top made out of 18 mm thick pre laminated particle borad exterior grade of approved make, all as shown on drawig, specified and directed.

TABLE DRESSING LADIES (FD-251) S & Fixed in repairs table top of Table dressing ladies with 18 mm thick pre-laminated particle Board exterior grade of approved make, all as shown on drawig, specified and directed.

S & Fixed in repairs new Glass shutters of Table dressing ladies all as shown on drawig, specified and directed. (Each glass shutter shall be measured as single unit)

Removing the existing unserviceable Aluminium channel and S & Fixed in repairs Aluminium Channel all as shown on drawig, specified and directed.

S & Fixed in repairs new back suport made out of 6 mm thick plywood for mirror of Table dressing ladies all as shown on drawig, specified and directed.

S & Fixed in repairs new mirror 5 mm thick for Table dressing ladies of approved make with complete frame back all as shown on drawig, specified and directed.

Supply & fixing of Knob of aluminium anodized dark brown in shade as approved by GE & in the following furniture items with screws all as shown on drawig, specified and directed. Side board, Table 3'x2' with drawer, Table Writing/Medium/Study, Table dressing gents with mirror & Table dressing ladies with mirror.

M&L preparation of old wood surfaces by scraping and removing old polish completely and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying melamyne polish upto glossy finish of mohogini/ walnut colour irrespective of drawing complete all as specified on drawing or as directed for the following furniture articles:- (29.01) Bed Ply top

Chair dining

Chair writing

Chair Easy

Chair wooden bottom without arm

Stool Dressing

Book Case

Bin linen small

Hat Stand with mirror

Side Board

Table dining 6/8 persons

Table without drawer 900x600x760mm

Table with drawer 900x600x760mm

Table 900x900mm

Table 1200x900mm

Teapoy

Table centre

Table writing

Peg Table

Table bed side

Table dressing Gents with mirror

Table dressing Ladies with mirror