Renovation of ground floor Iron ore processing building of AMT Department at CSIR-IMMT, Bhubaneswar

Amount

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of sizeSize of Tile 600 x 600 mm

Grouting the joints of flooring tiles having joints of 3 mm width, usingepoxy grout mix of 0.70 kg of organic coated filler of desired shade(0.10 kg of hardener and 0.20 kg of resin per kg), including filling /grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm

Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. ( - )

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Distempering with 1st quality acrylic distemper, of make ''Asian UNO'' including applying additional coats wherever required, to achieve even shade and colour. Old work ( one or more coats) (Agency shall bring container at a time and make signature of official of ESD before start of the work and keep the signed container till the final bill is passed)

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping ground or as approved by Engineer-in-charge for all leads including all lifts involved

Removing the existing PVC sheet flooring including cleaning the surface as good in condition and disposal of dismantled material , for all leads including all lifts involved. as per direction of Engineer-in-charge.

Dismantling, cutting and refixing the existing Aluminum sinngle/ doule leaf door shutter in good condition incuding fixing necessary screws as required as per direction of Engineer-in-charge.

DEEPAK KUMAR DAS (BID ID -821995)