REPAIRS / RESURFACING OF CERTAIN ROADS AND ROAD FURNITURE UNDER AGE B/R II AND AGE B/R III AT DSSC WELLINGTON

Amount

Material and labour for scarifying or picking graveled, macadam or bituminous macadam surfaces in area not exceeding 400 sqm and depth exceeding 50 mm and not exceeding 100mm deep complete all as specified and as directed.

Material and labour for preparing scarified top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying tack coat using Bituminous cold emulsion Rapid setting Grade-1 (RS-1) @ 10 Kg per 10 Sqm over scarifying surfaces etc complete all as specified and as directed.

Material and labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying tack coat using Bituminous cold emulsion Rapid setting Grade-1 (RS-1) @ 5 Kg per 10 Sqm etc complete all as specified and as directed

Material and labour for Premix Bituminous Macadam with binder content of 4% by weight of total mix using paving bitumen of VG-30, laid rolled and compacted to required camber and gradient (Consolidated thickness 75 mm or less) with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 tonne power roller complete all as specified and as directed.

Material and labour for Bituminous Premix Semi Dense Asphaltic concrete 40mm consolidated thickness using paving bitumen of Grade VG-30 with 5.5% binder content by weight of total mix using hot mix plant and mechanical paver rolled and compacted to required camber and gradient with 8 to 12 tonne power roller complete all as specified and as directed.

Material and labour for applying 2mm thick road marking paint with reflective thermoplastic white road marking paint confirming to BS-3262 (1989), either continuous or broken lines over existing or new painting surfaces of cement or bituminous surface, laid down through road marking machine using thermo plastic material by incorporating the white glass powder for reflectivity in 100 mm width in white or golden yellow colour by using applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, including cleaning the road surface of all dirt, seals, oil grease and foreign material etc complete as direction of Engineer-in-Charge and in accordance with applicable specification complete all as specified and as directed.

Excavation in post holes (or similar holes) each not exceeding 0.5cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, in watering and removing surplus soil to a distance not exceeding 50m and making good surface in soft / loose soil all as specified and directed.

Material and labour for Plain Cement Concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete etc complete all as specified and as directed.

Supply and fix Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of floor or the side of waist slab with suitable arrangement for road sign board complete all as specified and as directed.

Material and labour for Signage board made of 3 mm thick ACP with EGP reflector sheet with printing on HP 365 Traffic edition laminated with 1170 C clear ECF sheet complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position and removal of rubbish to outside MD land etc complete all as specified and as per directed all as specified and as per directed

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removal of rubbish to outside MD land etc complete all as specified and as per directed all as specified and as per directed

Material and labour for plain cement concrete 1:3:6, type C-2, using 40mm graded aggregate as in surface channel and drains including necessary from work and forming fair finish the surface complete all as specified and directed.

Material and labour cement concrete 1:3:6, type C-2, using 40mm graded aggregate as in 75mm thick pavings, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed

Supply and fix in repairs cat eye body made in polycarbonate with electronically prismatic retroreflective lines on both sides for maximum retro reflecting in wet and dry condition fixed with adhesive/ epoxy complete all as specified and directed.

Supply and fix in repair Duo-directional CAT eyes (road studs) of size 90x110x17 mm made up of weather resistant high impact polymer conforming to ASTM D4280 & having electronically welded micro prismatic lens with abrasion resistant coating & fixed with 2 Nos of polymer shanks of suitable dia & suitable adhesive conforming to IS as per procedure recommended by manufacturer and complete all as specified and as directed.

VENKATESH

Vishnu Infrastructures

KSR AND COMPANY