Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.8 LAccepted-AOC FLAT NO 03 MALTI NIWAS AVADH VIHAR COLONY MANDAKNI BLOCK BEHIND RAILWAY STATION DISTRICT AYODHYA 224001 UP | AYODHYA | AYODHYA | UP | 224001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹18.1 L+₹64,046.40 (3.67%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹19.0 L+₹1.5 L (8.71%)Rejected-Finance | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹19.2 L+₹1.7 L (9.95%)Rejected-Finance | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹20.2 L+₹2.7 L (15.8%)Rejected-Finance | L5 | Rejected-Finance Not being L1 |
Tender Value
₹28.5 L
EMD Value
₹57,000
Closing Date
27 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (MES) Faizabad
Garrison Engineer Military Engineer Services Faizabad PIN- 224001
SPL REP TO COOK HOUSE BK NO. 14 30A OF TRG CELL AND SEPARATE TOILETS NEAR BLDG NOS BK-19, BK-20, BK-25, BK-56, C-99, BK-17, P-43 QG AND MT LINE AT DRC UNDER GE FAIZABAD
2022_MES_548705_1
8331/E8
Open Tender
Civil Works
Item Rate
180 days
Faizabad
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (MES) Faizabad
₹57,000
Yes
7 Nov 2022
30 Aug 2022
29 Sept 2022
30 Aug 2022
27 Sept 2022
14 Sept 2022
Amount
Dismantling the asbestos cement (corrugated, semi corrugated, etc) sheets in roof covering complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Taking down cement plaster from brick walls including raking out joints, hacking for key, scrubbing down with water to receive plaster and rubbish off the premises etc
M&L for 10mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar (1:4) mixed with water proofing compound as per manufacturer's instructions on fair faces of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured & paid for separately at supply only rates.
M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed.
M&L for preparing old decorated surfaces of walls and applying two coats of white wash complete all as specified and directed.
M&L for preparing old decorated surfaces of walls including complete removal of existing decorative treatment of any description and applying two coats of cement base paint over a coat alkali resistant primer complete all as specified and directed.
Taking down existing water proofing treatment of any description (tarfelt) including cement plaster / screed bed, loose concrete and removing all bushes wood growth etc from roof and cleaning & preparing the surface complete all as specified and directed.
M&L for 10 mm thick plaster in cement mortar (1:4) mixed with water proofing compound as per manufacturer's instructions on fair faces of roof slabs, finished fair and even complete all as specified and directed. Note: WPC shall be measured & paid for separately at supply only rates.
M&L for applying one coat of bituminous primer @ 0.50 Kg/Sqm on prepared and dry surfaces of roof slab and applying a coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm and laying of polymeric water proofing membrane (Wt not less than 3.00 Kg/Sqm) with end lap 100mm and side laps 75mm sealing the joints with torch method and applying a coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm on top of polyclinic membrane complete all as specified and directed.
Suppy only integral water proofing compound of approved quality complete all as specified and directed.
S&F 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc, fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.
S&F Pre-Painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L Machine cut kota stone slab flooring 20 - 25 mm thick, laid over and including 20mm thick cement screed base in cement mortar (1:6) in flooring, set and jointed with grey cement slurry and pointed in neat grey cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L Machine cut kota stone slab flooring 20 - 25 mm thick, laid over and including 10mm thick screed base in cement mortar (1:4) in vertical surfaces as in risers of steps, skirting, dado and pillar, set and jointed in neat grey cement slurry and pointed in grey cement mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed.
Taking down chowkats or frames exc 1.5 Sqm but n. exc 4.00 Sqm each( without taking off shutters from the frames) complete all as specified and directed.
S&F 2nd class hard wood, plain straight, solid chawkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed complete all as specified and directed.
S&F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamferd or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.24(a), etc complete all as directed by Engineer-in-charge.
S&F 100mm long steel butt hings medium weight cold rolled mild steel & fixed to chowkats complete all as specified.
S&F 150mm size aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed.
S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed.
S&F 100mm size aluminium bow handles, cast type, anodised size complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 and fixed with stainless steel wire staples complete all as specified and directed.
S&F 150mm floor door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring and fixed in floor complete as all as specified and directed.
M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 and fixed with stainless steel wire staples complete all as specified and directed.
Taking up or down 15mm dia bore steel tubing and connections, including cleaning for re-fixing or removal to store and S&F 15 mm dia GI tubing medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.
Taking up or down 20mm dia bore steel tubing and connections, including cleaning for re-fixing or removal to store and S&F 20 mm dia GI tubing medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.
S&F in repair, 15mm bore bib taps cast copper alloy fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed to iron pipe or for brass furule and fixed complete all as specified and directed.
S&F 15mm bore stop valves cast copper alloy fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends to iron pipe or for unions and fixed complete all as specified and directed.
Resecuring or easing & adjusting shutters exc 1.00 Sqm and n.exc 2.00 Sqm each and re-fixing in the same opening complete all as specifed and directed.
M&L for preparation of old wooden surfaces of any description , not other wise described, over 10cm width or girth including and applying one coat of synthetic enamel paint complete all as specifed and directed.
M&L for preparing old steel & iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparing newly plastered or previously untreated surfaces of brick, stone or concrete surfaces and applying two coats of plastic emulsion enamel (ordinary tint) over a coat of primer complete all as specifed and directed.
M&L for bees wax polishing to kota stone slab flooring / skirting complete all as specified and directed.
M&L Glazed ceramic coloured tiles in vertical surface 350x250x 7 mm / 450x350x7mm thick, laid over and including 10mm thick rendering coat in cement mortar (1:4) in vertical surfaces as in skirting, dado, set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles complete all as specified and directed.
M&L Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.
Taking down chowkats or frames n.exc 1.5 Sqm each ( without taking off shutters from the frames) complete all as specified and directed.
S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified & directed
S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC "C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification and drawing and as directed.
M&L for 5mm thick rendering in cement mortar (1:3) on fair faces of brick work or concrete surface of ceiling, finished even and smooth with out using extra cement complete all as specified and directed.
M&L for 10mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for preparing old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
S&F 35mm thick 2nd class hard wood plain framed panlled shutters (any numbers of panels) with panels of timber flat on both sides or of veenerred particle boards medium density, wood particle board with commercial face veereers and fitted to chowkat complete all as specified and directed.
M&L for cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends, or edges of landings steps, cills and cutting chases for concealed water tubing or conduit wiring etc, cutting exc 10 cm but not exc 20 cm girth complete all as specified and directed.
S&F in repairs, 15mm bore stop valves (concealed type) cast copper alloy, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends to iron pipe or for unions and fixed complete all as specified and directed.
S&F 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair, 125 mm size shower rose, brass chromium plated with or with out swivel joint including fixing to steel pipe or union complete all as specified.
Dismantling and taking down existing unserviceable water storage tank of capacity 250 to 500 ltrs of any description, kept in store and S&F 500 litres capacity rotational moulded polythene water storage tanks (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I and directed complete all as specified and directed.
Dismantling and taking down existing unserviceable water storage tank of capacity 1000 ltrs of any description, kept in store and S&F 1000 litres capacity rotational moulded polythene water storage tanks (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I and directed complete all as specified and directed.
S&F in repair, 15mm pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or with out lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F 15mm pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or with out lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F 20mm bore Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (min weight 20mm-210 gms) fixed to iron pipe complete all as specified and directed.
S&F in repair, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (min weight 20mm-210 gms) fixed to iron pipe complete all as specified and directed.
S&F in repair, 32mm dia bore dia PTMT discharge pipe waste coupling (half or full threaded) (min weight 32mm-45 gms/40mm-60 gms) for kitchen sink complete all as specified and directed.
S&F in repair, PVC connection 15 mm size 600mm long with PTMT nuts & washers at both ends and fixed complete all as specified and directed.
S&F in repair, PTMT towel rail 600 mm long (mini weight 190 gms), fixed with and including CP brass screws and wooden gitties / plastic plugs complete as specified and directed.
S&F PTMT urinal spreader of any colour for fixing with 15mm dia pipe (mimimum weight 60 gms) complete as specified and directed.
S&F in repair, vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and including seat cover complete all as specified and directed.
S&F in repair, vitreous china squatting pan, Orissa pattern, size 580 X 440 mm white, with integral foot rests (excluding cistern and flush pipe) but including connection to trap, and to flush pipe, anti-Syphonge pipe,and incl trap set in lime concrete etc complete including making good to floor complete all as specified and directed.
S&F in repair, vitreous china wash hand basin, white, flat back, size 450 X 300 mm excluding taps, wash, chain and plug and procelain stopper but including brackets, cutting for pinning in ends of brackets or erecting stand and PTMT waste coupling (half or full thread) min weight 32mm-45 Gms/40mm-60Gms) and PVC waste pipe of suitable size complete all as specified and directed.
S&F in repairs, 10 litres capacity PVC valveless syphonic action type low level flush cistern, white with inlet, ball valve, float & handle including brackets and 32mm dia flush pipe of polythene of low or high density for low level flushing cistern complete all as specified and directed
S&F vitreous china urinal bowl type or half stall pattern white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets flush pipe grating and union for discharge complete all as specified and directed
S&F in repair, 15mm angle stop cock of CP, screwed for iron pipe and fixed complete all as specified and directed.
Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quins, arches , pillars but excluding ashlar facing and pre-cast concrete articles complete all as specified and as directed.
M&L for brick work with old size sub class 'B' bricks in cement mortar (1:6), straight or curved on plan exc 6 m mean radius complete all as specified.
M&L for extra forming fair finished drain or channel 30cm inner girth in cement concrete ,using extra cement incl forms , moulds.mitred / stopped end & etc complete all as specified.
M&L for precast RCC (1:2:4) type B1 ( using 20 mm graded crushed stone aggregate) as in cover slabs (for manholes etc), chajjas, mangers, shelves etc, set in cement mortar (1:6) with joints to match complete all as specified and directed.
S&F TMT steel bars 6 to mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends etc and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
Hacking out old broken glass of any thickness, size, quality or descripiton from metal frame including punching or drilling out old glazing pin/spring and providing and fixing new ones and S&F 3mm thick figured glass, pin head type and glazing with oil puttyin squares n.exc 0.5 Sqm in each pane.complete all as specified.
Taking down 100mm /110mm dia bore pipe of any description including fittings from wall or floor and S&F 110 mm dia PVC (SWR) single socketed, fixed to walls or laid in floor in any length with rubber ring joints including necessary clamps complete all as specified and directed
Taking down 75mm dia bore pipe of any description including fittings from wall or floor and S&F 75 mm dia PVC (SWR) single socketed, fixed to walls or laid in floor in any length with rubber ring joints including necessary clamps complete all as specified and directed
S&F 110 mm bore PVC (SWR) bend of any radius with access door complete all as specified and directed.
S&F110mm bore PVC (SWR) branch piece, single Y equal or unequal with oval access door complete all as specified and directed.
S&F 75mm bore PVC (SWR) branch piece, single Y equal or unequal with oval access door complete all as specified and directd.
S&F 75 mm dia, PVC (SWR) bend of any radius with oval access door complete all as specified and directed.
Demolition of cement concrete of any description in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.
S&F 100mm dia PTMT grating doom (minimum weight 25 gms) complete all as specified and directed.
M&L for 75 mm thick plain cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in sub-base of floors, plinth protection and the like, laid in panels, finished the surface of concrete fair and even, complete all as specified.
Taking down carefully copper / aluminium point wiring (light, fan, call bell, two way, socket or power) complete with fittings & fixtures such as switches, ceiling roses, pendants, regulators, tube fittings and other kit & fittings, removing unserviceable materials from work site and making good disturbed portion / surface of wall/ floor/ ceiling etc by using cement mortar (1:4) including white / colour wash / distempering etc as required to match with the existing surfaces / location complete all as specified and as directed.
M&L for concealed type point wiring with PVC insulated PVC unsheathed electric (FRLSH) cable of size 1.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLSH) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including non-modular type GI sunken boxes suitable for non-modular switches/sockets etc with 3mm thick hylam sheet with glossy finish including necessary cutting for fixing switches, sockets, regulators etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system including cutting chases in wall and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified for the following:-
All as per Srl item No. 87.00 above but for one light/fan point controlled by one, one way switch
All as per Srl item No. 87.00 but for One socket outlet point 6 A on same board
All as per Srl item No. 87.00 but for one socket outlet point 6 Amps on independent board
All as per Srl Item No. 2.00 here in before but concealed point wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable and 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable, green colour as earth continuity wire for 16 Amps power socket point controlled by one, one way 16 Amps non-modular switch on independent board complete all as specified and directed.
S&F switch piano flush type polycarbonate single pole one way 6 Amps complete all as specified and directed.
S&F switch piano flush type polycarbonate single pole one way 16 Amps complete all as specified and directed.
S&F socket outlet polycarbonate 2 in 1, 3 pin 6 Amps flush type complete all as specified and directed.
S&F socket outlet polycarbonate 2 in 1, 3 pin 6/16 Amps flush type complete all as specified and directed.
M&L for ceiling rose in polycarbonate 3 terminal brass flush type 6 Amps, 250 Volts, AC supply (ISI marked), fixed on & including 3 mm thick 75mm dia sunmica hylum plastic laminated round sheet complete all as specified and directed.
S&F electronic fan regulator 230 Volts, stepped type (5 steps) socket type, hum free 100/300 watt, complete all as specified and directed.
Taking down existing submain wiring of any description and M&L for sub main wiring with two runs of 6.00 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 Volts grade multistranded copper conductor single core cable drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 6.00 Sqmm green in colour as earth continuity conductor connected to common earth dolly from main DB to Sub DB including cutting chases and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified. Note:- (i) Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. (ii) Cable required for connection to DBs and MCBs shall be deemed included in quoted rates. (iii) Earth wire shall run inside the conduit pipe.
Taking down unserviceable main switch, DB’s insulators, DB for MCB and board etc of any type and any capacity and further disposal including making good the disturbed surfaces in cement mortar (1:4) including applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and as directed.
S&F epoxy powder coated MCB distribution box double door TPN 4 way horizontal type for MCBs alonwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed. Note: - MCBs shall be measured and paid for separately under respective item of Schedule 'A'.
S&F epoxy powder coated MCB distribution box double door SPN 8 way horizontal type for MCBs alonwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed. Note: - MCBs shall be measured and paid for separately under respective item of Schedule 'A'.
S&F epoxy powder coated MCB distribution box double door SPN 4 way horizontal type for MCBs alonwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed. Note: - MCBs shall be measured and paid for separately under respective item of Schedule 'A'.
S&F MCB, TPN, 100 A, 415V, 10kA, 'C' curve miniature circuit breaker (MCB), fixed in DB including necessary connection, testing and commissioning, complete all as specified.
S&F MCB, SPN, 40 A, 415V, 10kA, 'C' curve miniature circuit breaker (MCB), fixed in DB including necessary connection, testing and commissioning, complete all as specified.
S&F MCB SP, 6 to 32 A, 230 V, 'C' curve, 10 kA, miniature circuit breaker (MCB), fixed in DB including necessary connection, testing and commissioning, complete all as specified.
S&F in replacement, LED batten tube light fitting,1X20 Watt indoor luminair batten for wall/ ceiling mounting box type, energy efficient including connection with & provn of twin core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to connector complete all as specified and directed.
S&F in replacement, LED street light fitting 35 Watt, 230 Volt AC outdoor type with high pressure die cast aluminium hosing and heat resistant with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics, IP 65/6 including connection with & provn of twin core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.
S&F in replacement, lamp holder PVC / polycarbonate type with cord grip, fixed on & including back plate 3 mm thick 75mm dia sunmica hylum plastic laminated round sheet, suitable for batten fittings complete all as specified and directed.
Taking down existing earthing of any description and M&L for new earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI earthing wire 4mm dia size by means of GI bolts, nuts, check nuts and washers, earthing wire protected by GI pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) type C1 in chamber of size not less than 300x300x300mm (internal diamentions) with cover made of RCC (1:2:4), type B-1, reinforced with 8 mm dia TMT bars @ 15 cm C/C both ways and angle iron 40X40X5mm frame etc duly painted with two coats of synthetic enamel paint over a coat of red oxided primer on exposed surfaces complete all as specified and directed by Engineer-in-Charge. Note: The unit rate includes earthing wire and protection pipe upto maximum 7.5 metre from earth plate, earth point / test point.
Taking down old unserviceable cable of any size and Supply, laying & testing 25 Sqmm 2 core XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100V grade complete all as specified and directed.
Excavation in trenches in soft/loose soil n.exc 1.5 mer wide and n.exc 1.5 m in depth for foundations of poles / stays / struts, trenches for laying of pipes/ cables etc n.exc 10 Sqm on plan and getting out excavated earth, forming bottom surfaces to required level complete all as specified and directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick in soft/loose soil complete all as specified and directed.
Removing surplus spoil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified and directed.
Supply and laying river sand for cushioning of cables with layers of sand 8 cm before lying of cable and 15 cm after lying of cable (total 23 cm) in trenches complete all as specified and directed. Note: Thickness of sand cushioning shall be measured as 18cm after punning for payment purpose.
Supply and laying brick protection cable cover using old size sub class ‘B’ bricks, laid flat adjacent to each other across the length of cable, laid dry, complete all as specified and directed by Engineer-in-Charge.
S&F in replacement, 40 mm bore GI pipe light grade for cable protection (ISI marked) with all fittings laid in floors/trenches, under roads or fixed on wall / pole or across the drain for cable protection including all necessary clamps, nuts & bolts etc complete all as specified and directed.
Saket Traders
JYOT BUILDERS
sethi tradres
J R ENTERPRISES
AIRDOT ENGINEERING
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .