PROVN OF GD ROOM ALONGWITH ATT BATHROOM AND TOILET WITH SEPTIC TANK, SOCK WELL AND FENCING AROUND 200 MTR AT DEF LAND LALITPUR UNDER AGE (I) TALBEHAT

Amount

M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, fillings, mass concreting complete all as specified and directed.

M&L for RCC nominal mix 1:1.5:3 type A-1(using 20mm graded stone aggregate) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC nominal mix 1:1.5:3 type (using 20mm graded stone aggregate) A-1 for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC nominal mix 1:1.5:3 type A-1(using 20mm graded stone aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC nominal mix 1:1.5:3 type A-1(using 20mm graded stone aggregate) for Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC nominal mix 1:1.5:3 type A-1(using 20mm graded stone aggregate) for Chajjas complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

M&L Brickwork with fly ash Old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.

M&L Brick work with fly ash Old size bricks,straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed

M&L PCC (1:4:8) type D-2 (using 20mm graded stone aggregate) 75mm thick as in sub base of floors all as specified and directed.

M&L PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) 25mm thick as in floors all as specified and directed.

M&L PCC (1:3:6) type C-2 using 20mm graded stone aggregate 75mm thick as in plinth protection finished surface even and smooth with using extra cement laid in alternate bays n.exc 2m in length all as specified and directed.

M&L for Hardcore Broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

S&F for 165mmx60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified and as directed.

S & F 105x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.

S&F M.S work as in holdfasts., wind ties , plane angle cleats for securing purlins to wooden trusses or rafters etc. complete all as specified and as directed

M & L cement concrete type B-0 1:2:4 (12.5 mm graded agg ) as in bed block , coping & filling to PS Frame etc complete all as specified and as directed

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for Chain link fencing confirming to Fe 410-w (Gde E-250) complete all as specified and directed.

S&F Mild steel TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for Chain link fencing confirming to Fe 410-w (Gde E-250) complete all as specified and directed.

S&F powder coated anodized aluminium frames for door, window , ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed.

S&F powder coated aluminium anodized side hung type window/ventilators shutter without sash bars section weight not less than 0.55Kg/RM with extruded built up standard tubular and other sections of approved make according to IS(thickness of powder coating not less than 50micron including necessay glazing clips weight not less than 0.124Kg/Rm for fixing sheet glass anodized aluminium fittings/fixtures such as required number of roller of suitable size interlocking cleats/ plates etc as required for complete fixing window shutters complete all as specified and as directed. Note:- Only aluminium shutters for the window shall be measured in sqm sheet glass and wiremesh etc shall be measured and paid in respective items

Supply and fixing 4.8mm thick sheet glass of ordinary quality in squares n. exc 0.5 sq.m each pane complete all as specified and as directed.

Supply and fixing 4.8mm thick sheet glass tinted of ordinary quality in squares n. exc 0.5 sq.m each pane complete all as specified and as directed.

S&F II nd class HW, 35 mm thick plain framed panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part I) kiln seasoned and chemically pressure treated complete all as specified and as directed

S&F 35mm thick IInd class hard wood glazed skelton shutters open rebated and prepaired to recive glass,guage etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of sutters as specified in SSR part - I section - 8, clause 8.20 (a). S&F to chowkhat complete all as specified and as directed

M&L for MS framed work such as framed guard bars / railings design/pattern aaproved by Engr-in-Charge conforming to Fe 290-0 or Fe 330-0 welded to ventilator/window complete all as specified and directed

S & F Stailess steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple & complete all as specified and directed.

S&F 150mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed

S & F 300mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F 300 Mild steel mm long, ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

S & F 140mm Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring , fixed in door,complete all as specified and directed.

S&F Stainless steel 20mm dia curtain rod including fixing brackets and stainless steel knobs complete all as specified and directed.

M&L rendering 5 mm thick in cement plaster on ceiling in cement mortar 1:3 on concrete surface finished even and smooth without using extra cement complete all as specified and as directed

M&L rendering 10mm thick in cement plaster 1:6 on walls surfaces of brick work/ concrete and surface finished even and smooth without using extra cement complete all as specified and as directed

M&L rendering 15mm thick in cement plaster 1:4 on walls surfaces of brick work/ concrete and surface finished even and smooth without using extra cement complete all as specified and as directed

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper all as over a coat of primer complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying two coats of Cement base paint all as over a coat of primer complete all as specified and directed

Material and labour for preparation of newly plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed.

M &L for coloured non skid ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed in CM (1:4) complete all as specified and directed.

All as per Ser item No 48 above but as in skirting but over 10mm thick CM (1:4) plaster complete all as specified and directed.

M&l galzed colour ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick cement plaster in CM 1:4 complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M & L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc crome primer all as specified

M & L for preparation of new steel surfaces of any description not otherwise described n.exc10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc crome primer complete all as specified and directed.

M&L rendering 10mm thick in cement plaster 1:4 on surfaces of brick work/ concrete and surface finished even and smooth without using extra cement complete all as specified and as directed

M&L of water proofing treatment to non accessible roof slab with APP based modified polymeric membrane centre core 100mm micron HMHDPE outer film 20 micron each having thickness 3mm, weight not less than 3Kg/Sqm as per manufacturers instruction with torch application complete all as specified and directed with following course of description below: (a) First coat apply bituminous primer confirming to IS-3384of 1965 @ 0.4Kg/Sqm to be applied on prepared roof surface till the surface is properly inpregnated (b) Second course of laying of APP based modified polymeric with 100mm overlap in longitudinal direction 150mm in tranverse direction sealed and bounded to the surface by torch application method. All joints and changes in all direction should be covered with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane (c) Third course of apply a coat of bituminous aluminium paint @ 0.20 Kg/Sqm over APP membrane Note:- (i)Work of water proofing treatment shall be carried out by the authorised appllicator of the manufacturer. (ii) The quoted rates is deemed to include for the cost of scaffolding, T&P etc required for execution of the work. (iii) Bituminous primer to be measured and paid separately in relavent items

Applying evenly a tack coat of industial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning of surfaces complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, fixing in same opening complete all as specified and as directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stile and plain colour PVC sheet for top rail lock rail &bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and directed.

S&F butt hinges 100mm extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed complete all as specified and directed.

S&F 125mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and as directed

S&F PVC valveless syphonic action type flushing cistern low level white inlet, ball valves float valves & handle including brackets of 10 litre capacity including down take pipe 32mm dia and making good disturbed portion in CM(1:4) complete all as specified and directed.

S&F 15 mm dia bore pvc connections with PTMT nuts of length 600 mm long complete all as specified and directed.

S&F Vitreous china wash hand basin coloured flat back of size 550X400 mm white excluding taps waste chain and plug and porcelain stopper but incl brackets & waste pipe 32mm dia complete fixed on brackets or erecting stand complete all as specified and directed.

S&F bevelled edge looking mirror 5.5mm thick of size 60cmx 45cm mounted on commercial plywood 6 mm thick including PVC beading all round and fixed to wooden plugs with chromium plated screws complete all as specified and directed.

S&F in repair Vitreous China, Squatting pan Orissa pattern size 580 x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe , including PCC (1:2:4) type B-1 for fixing of WC and making good the floor to match the existing complete all as specified and directed.

M&L 32 mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches /floors /walls complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bend complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bend with access door complete all as specified and directed.

S&F 110 mm dia PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed.

S&F PVC(SWR) Vent cowl 110mm dia complete all as specified and directed.

S&F for grating dome 125mm dia with hole of PTMT complete all as specified and directed.

S&F rotational moulded polethylene water tank of 1000Ltrs capacity (Cylindrical vertical with closed top) noticed and portion all as specified SSR Part-I complete all as specified and directed.

S&F 20mm ball value high pressure of PTMT with apoxi coated aluminium rod and high density plastic ball screwed for iron pipe all as specified and as directed

S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

All as per Ser item No 76 above but 20 mm bore complete all as specified and directed.

S&F in PVC waste pipe 32mm bore 600mm long with one end socketed complete all as specified and directed.

Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed.

Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, Fancy types crewed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F Stop valves, chromium plated fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F 20mm dia Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F Soap dish, vitreous China white, approximate size 160x 160x90mm soap tray embedded in the wall complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed.

M&L PCC (1:3:6) type C-2 (using 20mm graded stone aggregate) 75mm thick as in sub bases/ floors all as specified and directed.

M & L for Hardcore of gauge n. exc 63mm, Broken stone or boulder, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade of approved quality,laid over 50mm thick sand cushion (Sand will be measured and paid separately) vibtrated with mecanical vibrator complete all as specified and as directed.

Supplied only fine aggregate (sand) for sand cushion complete all as specified and directed.

Supply and lay steel water tubing GI Medium grade ISI Marked 20 mm dia bore with all necessary fittings and fixtures laid in trenches or fixed to wall etc complete including cutting and fixing with existing pipe all as specified and directed.

Supply and lay steel water tubing GI Medium grade ISI Marked 25 mm dia bore with all necessary fittings and fixtures laid in trenches or fixed to wall etc complete including cutting and fixing with existing pipe all as specified and directed.

Removal of surplus soil to a distance not exceeding 50 mtr depositing where directed at a level not exceeding 1.5 mtr above ground level complete all as specified and directed.

S&F Bib taps 20mm bore dia cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and Installation self priming Monoblock Pump single phase 1HP, discharge range 3300-1300 LPH, head range 30 mtr, suction and delivery size 25mm, copper winding with all necessary fittings all as specified and directed.

M&L for excavating over areas, n exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed.

All as per Ser item No 99 above but depth exc 1.5 m but n. exc 3.00m and getting out soft/loose soil complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 using 20mm graded stone aggregate as in foundations, fillings, mass concreting complete all as specified and directed.

M&L for RCC nominal mix 1:2:4 type B-1 (using 20mm graded stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC nominal mix 1:2:4 type B-1 (using 20mm graded stone aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L Brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size bricks, complete and all as specified and directed

M&LBrickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in built in CM 1:4 complete and all as specified and directed

M&L for 150 mm bore Reinforced concrete pipes, class NP2, laid in trenches and jointed complete with collars and tested complete all as specified and directed.

M&L for concrete bed for 150 mm bore pipe in laid with PCC 1:4:8 type D-2 to drain pipes including packing under, haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Providing precast cement concrete type B1, 1:2:4 (Using 20 mm graded aggregate) as in cover slabs for septic tank/ manholes/drains set in cement Mortar 1:4 complete all as specified and as directed.

M & L for loose filling with aggregates of gauge 80 to 150 mm using broken stone or boulders in soakage pits , soakage wells complete all as specified and directed.

M & L for Brickwork with sewer bricks straight or curved on plan exc 6 m mean radius in cement mortar 1:4 for man-holes/ septic tank/ soakwell etc.in sewer works complete all as specified and directed.

S&F Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for man hole/septic tank rungs confirming to Fe 410-w (Gde E-250) complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, as spetic tank vent pipe complete all as specified and directed.

S&F PVC(SWR) Vent cowl 110mm dia complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends complete all as specified and directed.

M&L for PCC 1:2:4, type B-2 using 40mm graded stone aggregate as in surface channel and drain complete all as specified and as directed

M&L rendering 10mm thick in cement plaster 1:4 on walls surfaces of brick work/ concrete and surface finished even and smooth without using extra cement using waterproofing compound @ 3% by weight of cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately

Supply only Integral waterproofing compound complete all as specified and directed.

Excavating in post holes in soft/loose soil each n. exc. 0.5 cum getting out , returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, watering & removing surplus soil to a distance N.exc 50 m and making good surface complete all as specified and directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

S&F Framed/ Unframed work as in doors or gates of angle or other section with gusset plates,rails,braces,also small article for old gates etc complete,all small articles including drilled for fixing of steel sheeting or other covering etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed.conforming to Fe-290 Gde E-165,

Supply only chain link fencing of galvanised steel wire 4 mm dia confirming to as per IS-2721-1979.wiremesh of size 100 x100 mm.incl line wires, any mesh, and any type of standards, rails, straining bolts, etc incl provision of binding wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc. including provision of binding wire complete all as specified and directed.

M&L for RCC nominal mix 1:2:4 type B-1 (using 20mm graded stone aggregate) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC nominal mix 1:2:4 type B-1 (using 20mm graded stone aggregate) for Columns, pillars, piers, posts and struts complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S&F 10mm dia of shank Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n.cex 10cm long complete all as specified and directed.

M&L for point wiring concealed type with 1.5sq mm FRLS PVC insulated unsheathed single core multithreaded copper conductor cable 1100 volts grade incl 1.5 Sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor drown through in and incl FRLS PVC rigid conduit not less than 20 mm dia with its accessories pressed steel terminal box incl 3mm thick ISI marked laminated sheet cover for fixing switches/socket/regulators etc for the following: Note:- On RCC ceiling/column, false ceiling, AC/Metallic Sheet ceiling wiring done on surface with conduit/PVC Casing caping and its accessories.

One light/fan point controlled by one No piano type switch 5 Amps single pole one way

One socket outlet 5/3 pin 6 AMPS controlled by one switch on the same board.

One socket outlet 5/3 pin 6 AMPS controlled by one switch on independent board.

All as per Ser item No 127 above but 3 pin socket out let 15/16 Amps on the independent Board all as spfd with single core unsheathed PVC insulated cable multistranded copper conductor of size 2.5 sq mm for phase & neutral & 2.5 sq mm for earth continuity conductor.

S&F Switch Piano Flush button single pole one way 5/6 Amp complete all as specified and directed.

S&F Switch Piano Flush button single pole one way 15/16 Amp complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin & 2 pin, 5/6 Amp, 240 volt complete all as specified and directed.

S&F socket outlet 2 in 1 , 3 pin & 2 pin, 5/6 Amp and 15/16 Amp, 240 volt complete all as specified and directed.

S&F ceiling rose surface bakelite 65mmx50mm 100watt three terminal complete all as specified and directed.

S&F step type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed.

S&F Lamp hoder/Batten holder PVC/Polycarbonate insulated body with metal ring and back plate for batten fitting complete all as specified and directed.

S&F sheet metal enclosure double door for MCB DB single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door (Metallic) type complete all as specified and directed.

S&F MCB SP 5 to 32 Amps 240 volts 'C' series, 10 KA, 50 Hz including connection in the DB and testing/commissioning complete all as specified and directed.

S&F MCB SPN 40 Amps 240 volts 'C' series, 10 KA, 50 Hz complete all as specified and directed.

Supply and fixing LED lights fitting 1x 18W, 4 feet, 220V,AC decorative box type with driver, holder including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED Lamp 9W B22 Type all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

Supply & Installation of desert cooler electric driven (single phase) having nominal air flow capacity 6000 cum/ hour (or nearest size) incl PVC water pipe connection with brass coupling nuts at both ends and PVC float valve including plug top complete all as specified and directed.

Supply and laying or fixing or passing through pipe in replacement, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1.00 meter apart including 4mm dia suspension wire one twin core cable flat or circular of size 10 sqmm 2 core complete all as specified and directed.

S&F house service bracket hook type complete with 3.00 Mtr Long GI Pipe 40mm dia medium grade, 02 Numbers 90 degree bends MS hook and stay or guy complete all as specified and directed.

Material and Labour for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in electrical plate No 3 of SSR Pt I including necessary excavation and earth work PCC (1:3:6) type C-1 with 50 mm thick pre cast RCC ( 1:2:4) type B-1 cover slab framed with 50X30X4 mm MS angle (reinforced with 6 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar) including providing charcoal or coke and magnesium sulphate in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade) wire mesh, copper lugs, complete in all respect., GI earth wire protected by 40 mm bore (light grade) galvanized iron pipe and other end connected to the earth bar (test point) made of MS flat (400X32X6 mm) bend in ‘D’ shape and fixed to wall by means of fast nut or bolt grouted in to wall at 1 mtr from plinth height. 4sqmm PVC insulated (colour green) copper conductor single run as earth continuity conductor along with 15 mm PVC conduit grouted in wall or fixed on wall surface to be continued up to main switch board and fix with common earth dolly as directed by EIC . Disposal of soil to a distance not exceeding 50 mtr and necessary testing on completion complete all as specified and as directed.

M/S SHIVA TRADERS

NATIONAL AUTO MOBILES

M/S A.R BUILDERS

HARNAM SINGH ANIL SINGH

M/S RAJ CONSTRUCTION AND ELECTRICAL