Loading…
Loading…
Tender Value
₹1.3 Cr
EMD Value
₹2.7 L
Closing Date
6 Jul 2026, 3:00 pm
Similar tender results from the same govt authority in the past 3 years.
Electrical TRD Works in connection with OHE modification work at NCBD Station against the Engg. Work "Provision of Direct reception at NCBD by providing crossover at MYGD end at NCBD"
AP-EL-TRD-01-26-27
AP-EL-TRD-01-26-27
Open
12 Months
Unknown (Unspecified Location)
₹0
₹2.7 L
12 Jun 2026
12 Jun 2026
22 Jun 2026
Preparation of OHE design & drawing
Concrete for foundation/Plinth including supply of sand, ballast & cement.
Supply of Structure Steel (Traction Mast) fabricated & galvanised of all Type: B-series mast
Erection of Structure Steel (Traction Mast) fabricated & galvanised of all Type: B- series mast
Supply of fabricated steel works (SPS) other than masts including MCC, Chairs etc.
Erection of febricated & Galvanized Steel parts Steel (SPS).
Supply of fabricated & galvanised structures (O,N & R type Portals) with all necessary components other than masts.
Erection of fabricated & galvanised structures (O,N & R type Portals) with all necessary components other than masts.
Supply without insulator of Single Bracket Assembly
Erection of Single Bracket Assembly with insulators
Supply of Stay insulator
Supply of Bracket Insulator
Supply and erection of 9-Tonne Insulator, Procelain (CD-1050 mm)
Supply without insulator of a Section insulator assembly
Erection of a Section insulator assembly
Supply of regulating equipment (3 pulley type) with counter weight assembly for conventional/composite OHE.
Erection of regulating equipment (3 pulley type) with counter weight assembly for conventional/composite OHE.
Supply of Guy rod assembly
Erection of Guy rod assembly 1184169.0
Supply of 107 sq. mm HDGC Contact Wire 1217954.0
Supply of 65 sq. mm cadmium copper catenary wire
Supply of a copper jumper (5 mm dia dropper wire) (SM547) pg 185
Supply of span wire
Erection of span wire
Supply of Contact wire Splices (toothed type), RI No. 1081-1
Erection of Contact Splices
Supply of Catenary Splices (65), RI No. 1091, 1092, 1093 & 1094
Erection of Catenary Splices
Supply of Overhead equipments only
Erection of Overhead equipments only
Supply of Retro reflective number plate complete as per RDSo's Spec. ETI/OHE/33a(12/97) Rev-6 or latest
Erection of Retro reflective number plate complete as per RDSo's Spec. ETI/OHE/33a(12/97) Rev-6 or latest
Supply of Dead section caution board (power block working limit)(inclusive of Erection charges)
Supply of Dead section caution board (Danger)(inclusive of Erection charges)
Supply & Erection of a Galvanized Steel stranded wire structure bond
Erection of a Galvanized Steel stranded wire structure bond
Supply of longitudinal bonds
Erection of longitudinal bonds
Supply of Transverse/Cross /Special bonds
Erection of Transverse/Cross /Special bonds
Supply and fitment of PVC Sleeve for bond Per Track
Adjustment of OHE and Tower Wagon Checking.
Supply of single earth electrode.
Erection of single earth electrode.
Supply of 25kV Post Insulator
Supply of 18 mm solid copper busbar with components
Erection of 18 mm solid copper busbar with components
Supply of copper bus-bar connectors: Bus terminal (RI-6310)
Erection of copper bus-bar connectors: Bus terminal (RI-6310)
Supply of solid copper bus bar connector: Bus splice (RI-6320)
Erection of solid copper bus bar connector: Bus splice (RI-6320) 1222078.0
Supply of 160 sq. mm large jumper wire
Dismantling of Over head equipments.
"Dismantling mast/structure/upright by cutting (If required) "
"Dismantling of cantilever assembly "
Dismantling of Regulating Equipments
Dismentaling of Guy Rod
Transportation of materials from depot to work site and work site to depot
Erection: installation, testing and commissioning of 25 KV/240 V, Auxiliary Supply Transformer (25 kVa capacity)
Erection of Anti climbing device for L.T. supply transformer station
Providing LT junction box for AT price shall include supply and erection of LV termination box assembly complete.
Supply without insulator of 25 kV D.O fuse switch assembly.
Erection without insulator of 25 kV D.O fuse switch assembly
Supply of 50x6 Sq.mm M.S Flat earthing lead.
Erection of 50x6 Sq.mm M.S Flat earthing lead.
Supply and erection of Split type arcing horn for AT.
Supply of Copper strips for equipment earthing.
Erection of Copper strips for equipment earthing.
Digging of cable trench for single cable for 2 core 150 sq.mm armoured cable.
Supply of 2 core 150 sq.mm LT UG Alluminium armoured cable XLPE having heat resisting insulation (98)
Erection of 2 core 150 sq.mm LT UG Alluminium armoured cable XLPE having heat resisting insulation (98)
Providing of L.T cable marker
Providing GI pipe 100 mm diameters as per Technical Specification.
Preparation of design and drawing for AT
Supply of 8 SWG GI wire for Earthing
Erection of 8 SWG GI wire for Earthing
Machine boaring is to be done where necessary with horizontal boaring of hole a depth of 2 mtr below GL by HDD machine. The entire work is to be executed as per direction of Railway Engineer.
Supply, laying, commissioning & testing of CI Pipe 100 mm dia Class LA type (IS 78 1536-2001) to be laid partly along the pole and partly through ground under railway track/road in cable trench for protection of cable with suitable fixing arrangement by MS clamp, nut, bolt,washer etc.as per instructionof Engineer incharge at site.
Dismantling of existing AT with all associated equipment, panel etc.
-: B : Extra Erection Charges under Power Block on Schedule-A
Erection of Structure Steel (Traction Mast) fabricated & galvanised of all Type: B- series mast
Erection of fabricated & galvanised structures (O,N & R type Portals) with all necessary components other than masts.
Erection of febricated & Galvanized Steel parts Steel (SPS).
Erection of Single Bracket Assembly with insulators
Dismantling of Over head equipments.
Dismantling mast/structure/upright by cutting (If required)
Dismantling of cantilever assembly
Dismantling of Regulating Equipments
Dismentaling of Guy Rod Per Track
Adjustment of OHE and Tower Wagon Checking.
Erection of Contact Splices
Erection of Catenary Splices
Erection of regulating equipment (3 pulley type) with counter weight assembly for conventional/composite OHE.
Erection of Overhead equipments only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
AdditionalTermsandconditions2.pdf
ATTACHMENT
Chapter-ll3.pdf
ATTACHMENT
ExplanatorynotesofscheduleofNCBD1.pdf Explanatory Notes of Schedule
ATTACHMENT
AnnexureVIB3.pdf
ATTACHMENT
ANNEXURE-IFirstsheetlatestmodified.pdf Annexure I First Sheet
ATTACHMENT
ANNEXURE-VA.pdf
ATTACHMENT
ANNEXURE-V.pdf
ATTACHMENT
ShramikKalyaninstruction.pdf
ATTACHMENT
GCC-2022-ACS10_1_1.pdf
ATTACHMENT
ACS11GCCWorks2026March.pdf
ATTACHMENT
ANNEXURE-IFirstsheetlatestmodified.pdf
ATTACHMENT
ExplanatorynotesofscheduleofNCBD1.pdf
ATTACHMENT
Download all tender documents and submit your bid