REPAIR MAINT OF CEILING FANS, EXHAUST FANS, WALL MOUNTED FANS , GEYSERS, SOLAR WATER HEATERS AND CONNECTED WKS

Amount

Taking down carefully existing ceiling fan of any size/sweep/make on any height from it's position, dismantling the fan including preventive maintenance by servicing, greasing, oiling, cleaning external surfaces porperly and replacement of defective spare parts and refixing the same in position including testing complete as directed by the Engr-in-Charge. (Note : Cost of spare parts and flexible connection wire as required shall be measured and paid separately under respective items of this Schedule as "Supply only").

Taking down carefully existing exhaust fan of any size/sweep/make on any height from it's position, dismantling the fan including preventive maintenance by servicing, greasing, oiling, cleaning external surfaces porperly and replacement of defective spare parts and refixing the same in position including testing complete as directed by the Engr-in-Charge. (Note : Cost of spare parts and flexible connection wire as required shall be measured and paid separately under respective items of this Schedule as "Supply only").

M&L for single coat painting of ceiling fan of any sweep with 1st grade quality synthetic enamel paint by spraying, filling cavites with filler including necessary preparation of surface duly demarking fan Nos complete as specified and directed

Supply only Bearing any type and size suitable for the existing ceiling fan complete as specified and directed . Make - SKF/NBC

Supply only Capacitor 2.5 Mfd paper insulated complete as specified and directed . Make -CG/EPCOS/Havells

Supply only Capacitor 4 Mfd paper insulated complete as specified and directed . Make CG/EPCOS/Havells

Supply only GM bush suitable for all as per sample any type of ceiling fan complete as specified and directed .

Supply only GM bush suitable for all as per sample any type of Table/cabin fan complete as specified and directed .

Supply only MS clamp (suitable for ceiling fan) for existing ceiling fan any type/size complete as specified and directed .

Supply only PVC canopy for existing ceiling fan suitable for fan upper with screw complete as specified and directed

Supply only PVC canopy for existing ceiling fan suitable for fan lower with screw complete as specified and directed

Supply only Ball bearing suitable for exhaust fan of 225 mm sweep complete as specified and directed . (Make : TATA/SKF/NBC).

Supply only Ball bearing suitable for exhaust fan of 300 mm sweep complete as specified and directed . (Make : TATA/SKF/NBC).

Supply only Ball bearing suitable for exhaust fan of 450 mm sweep complete as specified and directed . (Make : TATA/SKF/NBC).

M&L for repair to fan shaft by filling metal cutting by machine grinding polishing complete and making good adequately for any ceiling fan complete as specified and directed

M&L for writing Nos or figures (Block, Roman, Italic or Indian) such as "MES No …." with synthetic enamel paint (1st grade quality) of tint black/white complete as specified and directed

S&F in replacement rubber insulator reel type suitable for fan hook of any type complete as specified and directed .

S&F in replacement PVC flexible 3 core round copper conductor of size 2.5 Sqmm from including connection complete as specified and directed.

S&F in replacement PVC flexible 2 core cable with copper conductor of size 0.75 Sqmm from ceiling rose to fan including connection complete as specified and directed.

S&F in replacement hanging fasterners with nut/bolt and rubber bush suitable for ceiling fan of any make and size complete as specified and directed

S&F in replacement down rod of ceiling fan made of GI pipe light grade 15mm dia duly drill and threaded with all fittings and fixed complete to walls/ceiling complete as specified and directed .

S&F in replacement fan blade set (set of three) made out of aluminium suitable for 1200/1400 mm sweep ceiling fan, as per existing size and gauge including balancing of body structure for free rotation complete as specified and directed . Make:- Usha/Crompton/ Orison/ Khaitan

Dismantling ceiling fan (any size/sweep/make) and taking out existing burnt out winding wire of motor and rewinding the same after proper cleaning with super enamelled copper wires as per existing gauge and turn to achieve the desired RPM, cleaning and replacement of bearings, bushes, capacitor etc as required and testing complete on completion for old model ceiling fan having requirement of super enamelled copper winding wire exceeding 500 Gms and not exceeding 1000 Gms for each fan and testing complete as specified and directed (Note : (a) Replacement of unserviceable parts like capacitor, bearing, bush and flexible wire shall be measured and paid separately. (b) Ceiling fan shall be collected from MES Store of GE Saugor and deposited to Store after repair.)

Dismantling of exhaust fan and taking out existing burnt out winding wire of motor and rewinding the same with super enamelled bare insulated copper winding wires as per existing gauge and turn to achieve desired RPM including cleaning and replacement of defective parts as required for exhaust fan of size 225 mm to 300 mm sweep and testing complete as specified and directed . (Note :- Replacement of unserviceable parts shall be measured and paid separately. (b) Exhaust fan shall be collected from MES Store of GE Saugor and deposited to Store after repair.)

Dismantling of exhaust fan and taking out existing burnt out winding wire of motor and rewinding the same with super enamelled bare insulated copper winding wires as per existing gauge and turn to achieve desired RPM including cleaning and replacement of defective parts as required for exhaust fan of size 450 mm sweep and testing complete as specified and directed . (Note :- Replacement of unserviceable parts shall be measured and paid separately.. (b) Exhaust fan shall be collected from MES Store of GE Saugor and deposited to Store after repair.)

M&L for single coat painting of exhaust fan of any sweep with 1st grade quality synthetic enamel paint by spraying, filling cavities with filler including necessary preparation of surface duly demarking the fan Nos complete as specified and directed. (Note : Writing Fan Nos & letter shall be measured and paid separately under relevent item of this Schedule).

Dismantling of air circulator fan/ wall mounting fan /table fan and taking out existing burnt out winding wire of motor and rewinding the same with super enamelled bare insulated copper winding wires as per existing gauge and turn to achieve desired RPM including cleaning and replacement of defective parts as required for air circulator fan/ wall mounting fan /table fan of any size and testing complete as specified and directed . (Note :- Replacement of unserviceable parts shall be measured and paid separately.. (b) Air circulator fan/ wall mounting fan /table fan shall be collected from MES Store of GE Saugor and deposited to Store after repair.)

S&F in replacement fan blade assembly with necessary MS screws & washers suitable for exhaust fans/air circullar fan/wall mount fan /padestel fan of any descriptions complete as specified and directed .(Note: Set of three blades shall be measured as one unit and make of assembly shall be as approved by GE.)

Taking down carefully storage type water heater (Geyser) any make and capacity from clamps/ bolts including disconnecting water and electric connection and refixing the same and connecting up after cleaning of geyser and repair in E/M yard or site bringing out inner tank , geyser apparatus (Flange), thermostat, indicator lamp and reassembling complete after carrying out repair and replacement of wornout parts complete as specified and directed. Note : (a) Worn out spares/repair of leakage of inner tank shall be measured and paid separately.(b) Petty stores like insulation tape, screws, small piece of cable, etc shall be provided by the Contractor without any extra cost to the department. (c) Defect developed while taking out the geysers, such as leaking of joints, damaging of thread of pipe/geyser and other GI fittings such as elbow, nipple, union, socket, etc shall be rectified/replaced by the contractor at his own cost.

S&F in replacement of geyser inner tank made out of stainless steel sheet, minimum weight 1.20 kg suitable for 25 liter capacity geyser, including ‘O’ ring, coupling set, necessary drilling work, nuts, bolts, washers, etc complete suitable for existing geysers complete as specified and directed .

S&F in replacement of geyser inner tank made out of stainless steel sheet, minimum weight 1.70 kg suitable for 50 liter capacity geyser, including ‘O’ ring, coupling set, necessary drilling work, nuts, bolts, washers, etc., complete suitable for existing geysers complete as specified and directed .

S&F in replacement Geyser flange assembly (existing/type) copper alloy cromium plated suitable for 25/50 Ltr capacity including rubber gasket, clamp & nuts/bolts etc complete as specified and directed

S&F in replacement Heating element 1.5 KW 230 Volts suitable for 25/50 Ltr capacity of Geysers as per site requirement/exisitng make brass metal, CP complete all as specified and directed. Make : Theeta

S&F in replacement Heating element 2 KW 230 Volts suitable for 25/50 Ltr capacity of Geysers as per site requirement/exisitng make, brass metal, CP complete all as specified and directed. Make : Theeta

S&F in replacement Heating element 3/4 KW 230 Volts suitable for solar water heater as per site requirement/exisitng make complete all as specified and directed. . Make : Theeta

S&F in replacement Heating element 2 KW 230 Volts suitable for 25 Ltr capacity of Geysers as per site requirement/exisitng make complete all as specified and directed. Make : Bajaj CALENTA 25

S&F in replacement Heating element 2 KW 230 Volts suitable for 25 Ltr capacity of Geysers as per site requirement/exisitng make complete all as specified and directed.. Make : RACOLD

S&F in replacement Thermostat suitable for 25/50 Ltrs capacity of Geyser as per site requirement/exisitng make complete all as specified and directed.. Make : Make : RACOLD

S&F in replacement Thermostat suitable for 25 Ltrs capacity of Geyser as per site requirement/exisitng make complete all as specified and directed.. Make : Bajaj CALENTA 25

S&F in replacement Thermostat suitable for 25/50 Ltrs capacity of Geyser as per site requirement/exisitng make complete all as specified and directed.. Make Theeta

S&F in replacement Indicating lamp 230 V complete all as specified and directed.

S&F in replacement fusible plug for geyser complete all as specified and directed.

S&F in replacement Glass wool in 25/50 liter capacity geyser by taking out inner & outer tank and reassembling complete all as specified and directed..

S&F in replacement Bib cock long body with flanged brass metal cromium plated size 15 mm suitable for hot water complete all as specified and directed.

M&L for painting of Geyser with two coats of synthetic enameled white paint including writing the MES No for 25 ltr capacity geyser of any make and type complete after removing old paint and preparation of surface complete all as specified and directed.

All as per Srl item No.53 here-in-before but 50 Ltr capacity -ditto-

S&F in replacement multi functional safety valve 15 mm , used in geysers as per site requirement complete all as specified and directed. Make : Racold/Bajaj/Havells.

S&F in repairs 15 mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or unions and fixed complete all as specified and directed.

S&F GI tubing med grade 15 mm bore with all fitting and fixed complete to walls /ceiling,and taking down of GI tubing with all fittings complete all as specified and directed..

S&F in replacement of GI union socket 15 mm bore, ISI marked complete all as specified and directed.

S&F in replacement of GI Tee 15 mm bore, ISI marked complete all as specified and directed.

S&F in replacement of GI Elbow 15 mm bore, ISI marked complete all as specified and directed.

S&F in replacement of GI Socket 15 mm bore, ISI marked complete all as specified and directed.

S&F in replacement of GI Hex nipple 15 mm bore, ISI marked complete all as specified and directed.

S&F in replacement PVC connection cold water grade 18” long 15 mm dia with two Nos coupling nut of brass, heavy duty, complete all as specified and directed. Make - Jaguar/Prayag .

S&F in replacement PVC connection cold water grade 24” long 15 mm dia with two Nos coupling nut of brass, heavy duty, complete all as specified and directed.Make - Jaguar/Prayag

S&F in replacement PVC connection wire woven hot water grade 18” long 15 mm dia with two Nos coupling nut of brass, heavy duty, complete all as specified and directed. Make - Jaguar/Prayag

S&F in replacement PVC connection wire woven hot water grade 24” long 15 mm dia with two Nos coupling nut of brass, heavy duty, complete all as specified and directed.

M&L for grouting of fastener of suitable size 15 mm dia, 150 mm long by drilling wall and making good to the disturbed surface and matching with existing surface all as specified and directed.

S&F in replacement Geyser base plate as per sample all as specified and directed

S&F in replacement exhaust fans AC single phase 230/ 240 V of size 250 mm sweep PVC body with lovers complete all as specified and directed. Make -Havells cat part no Ventil Air -DX White/Bajaj MAXIMA DX/Crompton Ventilus10ʺ

S&F in replacement exhaust fans AC single phase 230/ 240 V of size 300 mm sweep mettalic body . complete all as specified and directed. Make - Havells TURBOJET/Bajaj MAXX AIR/Crompton EXHD300-6-1.

Repair /services/ checking of solar water heater of any capacity including descaling and arresting any type of leakage complete all as specified and directed.

M&L for screwing existing steel tubing for altration or additions or lengthening screw on pipe to form conectors of any size GI tubing all as specified and directed

S&F PVC pipe medium grade 25mm/40mm complete all as specified and directed.

S & F in replacement of Special grade Borocilicate glass tube as per sample suitable for existing 100 LPD and 200 LPD solar water heater complete all as specified and directed.

S&F in replacement in replacement of solar collector plate with tough end glass suitable size as per sample fixed on solar collector complete all as site requirement and directed by Engr-in-charge.

M/S NAVIN & ASSOCIATES

M/s ajeet enterprises