Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.0 LAccepted-AOC NEAR RAILWAY STATION UTARLAI BARMER RAJASTHAN PIN 344001 | BARMER | RAJASTHAN | 344001 | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹18.3 L+₹20,303.60 (1.12%)Rejected-Finance V PO RAIKO KI DHANI NAWAJI KA PANA BHURTIYA DISTT BARMER RAJ PIN 344001 | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance HIGHEST | |
| 3 | L3₹19.1 L+₹1.0 L (5.55%)Rejected-Finance VILL JASSAI DISTRICT BARMER RAJ 344001 | JASSAI | BARMER | RAJASTHAN | 344001 | L3 | Rejected-Finance HIGHEST | |
| 4 | L4₹19.3 L+₹1.2 L (6.45%)Rejected-Finance | L4 | Rejected-Finance HIGHEST |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY BARMER
Military Engineer Services, Jalipa Military Station, Garrison Engineer (Army), Barmer, PIN 344001
REPAIR TO CERTAIN MISC B R WORK IN BLDGS OF ZONE B AT JALIPA MIL STN UNDER GE ARMY BARMER
2022_MES_530660_1
8646/E8
Open Tender
Civil Works
Item Rate
180 days
GE ARMY BARMER
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE ARMY BARMER
₹40,000
7 Sept 2022
16 Jun 2022
28 Jul 2022
16 Jun 2022
27 Jul 2022
30 Jun 2022
Amount
Demolition of cement concrete (unreinforced) in ground floors, and pavings n.exc. 15 cm thickness (below or above GL) all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding; removing serviceable tiles to store or disposing off the site after offering credit all as specified and directed.
Dismantling stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. all as specified and directed.
Taking down cement plaster on brick/ stone/PCC block masnory walls etc any description incl raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. .
Demolition of brick/stone/PCC block masnory work built in cement mortar in any description all as specified and directed.
Taking down shutters of any description n exc 1 sq. m each repair and refixing in same opening (Aluminium shutter/wooden shutter) including all necessary fitting which is required for tightnining to shutter complete all as specified and directed.
Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each repair and refixing in same opening (Aluminium shutter/wooden shutter) including all necessary fitting which is required for tightnining to shutter complete all as specified and directed.
Taking down shutters of any description n exc 1 sq. m each all as specified and directed.
Taking down Shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed.
Taking down shutters of any description but exc 2 sq. m each all as specified and directed.
Taking down chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) all as specified and directed.
Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each each but with shutters (without taking off shutters from the frames) all as specified and directed.
Taking out old serviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size; hacking out old putty or removing beads etc, including making good breakages in taking out and handling removing to store or stacking for reuse all as specified and directed.
M&L 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) for plinth protection finished even and smooth with out using extra cement complete all as specified and directed.
M&L 40 mm thick PCC type B-1, 1:2:4 (20 mm graded agggregate),as in floor, finished smooth and even with out extra cement complete all as specified and directed.
S&F Glass dividing strips, 3 mm thick ,28mm width and inserted in position,conform to design complete all as specified and directed.
M&L 100mm thick PCC type B-2, 1:2:4 (40 mm graded agggregate),as in floor, finished smooth and even with out extra cement complete all as specified and directed.
S&F Glass dividing strips, 3 mm thick ,38mm width and inserted in position,conform to design complete all as specified and directed.
M&L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.
M&L Type C2 1:3:6 (40mm graded aggregate)Cement concrete in foundations, filling and mass concrete for sub base complete all as specified and directed.
M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.
M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.
Supplying red bajri spreading and levelling in layers n exc. 25 cm thick complete all as specified and directed.
M&L Non skid Ceramic tiles 7 to 8 mm thick joint free (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc and set, jointed in neat cement slurry including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed.
S & F 10.5 mm thick rectified digital floor tiles of size exc. 0.06 sqm but not exc 0.09 sqm any square/rectangular shape and size conforming to relevant IS with coloured cement and pigment, laid over and incl 15 thick screed bed in CM 1:6 and all as specified and directed by Engr-in-chage. Make : Johnson or equivalent make
M&L Non - skid Ceramic tiles 7 to 8 mm thick joint free (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. jointed in neat cement slurry and including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed.
M&L glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match set including backing coat of mortar 10mm thick in CM 1:4 complete all as specified and directed.
M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete ,type C-1 1:3:6 (20mm graded aggregate) set in 1:6 CM complete all as specified and directed.
Except only pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete , set in 1:6 CM complete all as specified and directed.
M & L Rendering 10 mm thick on fair faces of brick work in CM 1:4 for wall complete all as specified and directed.
M & L Rendering 10 mm thick on surface other than fair face of brick-work in CM 1:4 for wall all as specified and directed.
M & L Rendering 15 mm thick on fair faces of brick work in 5 mm thick CM(1:4) over 10mm thick CM 1:6 10 finished even and smooth with water proofing compound all as specified and directed.(WPC measured and paid seprately)
Supply only water proofing compound of approved make complete all as specified and directed.
M & L Rendering 5 mm thick on ceiling surface for fair face of plastered surfaces in CM 1:4 for wall complete all as specified and directed.
M & L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper paint over a coat of 3mm thick wall care putty over a coat of alkali resistance primer as per manufacturers' instructions etc complete all as per specified and directed.
M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint/camouflage painting over a coat of alkali resistance primer as per manufacturers' instructions etc complete all as per specified and directed.
M & L for preparation of new plastered surfaces of walls and applying two coats of exterior acrylic emulsion paint (Apex) /camouflage painting over a coat of alkali resistance primer as per manufacturers' instructions etc complete all as per specified and directed.
M & L for preparation of new plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistance primer as per manufacturers' instructions etc complete all as per specified and directed.
M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash all as per specified and directed.
M&L Machine cut kota stone slab flooring 20-25 mm thick over 15 mm thick cement screed base in CM 1.6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing at site complete all as specified and directed.
M&L for Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillars laid over 10 mm thick cement screed 1:3 and jointed with grey cement slurry mixed with pigment complete all as specified and directed.
M&L machine pressed cement concrete tiles 25cm x 25cm x 22mm thick,coloured tile set jointed and pointed in neat cement slurry in floors with white cement and pigment, and cut and polished including screed bed 20mm thick in CM (1:6) complete all as specified and directed.
M&l chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.
S&Fixed steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&Fixed steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.
S&Fixed steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.
S&Fixed pressed steel frames (105 x 60mm)for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.
S&Fixed pressed steel frames (125 x 60mm )for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
S&F chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for preparation undecorated steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth applying two coat synthetic enamel paint over a coat of red oxide,zinc crome complete all as specified and directed.
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.
S&Fixed in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F 3mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F 3mm sheet glass,frosted, on one side ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed
S&Fixed in repair 3mm sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as specified and directed.
S&F 35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for preparation undecorated wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth applying two coat synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 125mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 125mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
S&F 150mm aluminium handles, cast type, anodised complete all as specified and directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F 150 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 75mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
S&F 100mm aluminium handles, cast type, anodised complete all as specified and directed.
S&F in repair 300mm, ordinary rat tail rod pattern springs including roller plate complete all as specified and directed.
S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handels 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified and directed.
S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
S&F 5.50mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as specified and directed.
S&F 5.50mm sheet glass, ordinary quality and glazing with oil putty in square but exc 0.5 sq. m in each pane all as specified and directed.
S&F 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.
S&F Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3 universal type,suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.
S&F in repair Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3 universal type,suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.
S & F double action floor spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.
S&F in repair 25mm dia and 1mm thick,mild steel drapery rod including brackets pattern aprroved by Engr-in-Charge complete all as specified and directed.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .