REPAIR MAINT TO FLOORING JOINERY PLUMBING SANITARY FITTINGS INCLUDING REPAIRS TO SEEPAGE LEAKAGE AND PERIODICAL SERVICES TO CERTAIN BLDGS IN OTM MD ACCN AREAS OF AGE BR II UNDER GE MIS MHOW

Amount

S&F fabricating coloured powder coated aluminium frame work for door shutter ,windows , ventilators, partitions with one or more rebates sections of approved tint as required including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc including taking down of exiting frame of any description complete all as specified and directed.

S&F aluminium coloured power coated window and ventilator shutter sliding type without sash bar ,aluminium section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, jointing cleats, glazing clips rubber packing anodised aluminium snap beading screws etc including taking down of exiting shutter of any description complete all as specified and directed.

S&F aluminium coloured power coated door shutters, aluminium section weighing minimum 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc including taking down of exiting shutter of any description complete all as specified and directed. .

S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition including necessary cutting / moulding and chamferring of edges for service window/counters complete all as specified

S&F in repair aluminium (extructed section) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter and fixed complete all as specified

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified

Demolition of brick work built in cement mortar of any description including all quions ,arches , pillars etc complete all as specified

M&L for brickwork with sub class 'B' modular bricks, straight or curved on plan exceeding 6 m mean radius, built in CM 1:6 complete all as specified

All as per item No 08 but except bricks.Note:Serviceable bricks obtainr from item No 07 shall be used.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surface of wall , finished even and smooth without using extra cement complete all as specified

M&L for rendering 10 mm thick in CM 1:6 on fair faces of wall / concrete surfaces finished even and fair complete all as specified

M&L for applying two coats of first quality oil emulsion distember over a coat of primer over a coat of Acrylic/Water Proofing Wall Putty (wherever required) on walls complete all as specified Note:- Putty shall be measured and paid seperately under relevant item

M&L for preparation of new plastered surfaces of walls and applying two coat of Acrylic Smooth exterior paint of required shade over a coat of primer of same make base all as specified

M&L for preparation of old decorated surfaces of wall including brooming , scraping down smoke spot, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and applying two coat of first quality oil emulsion distemper white/coloured over a coat of Acrylic/WaterProofing Wall Putty (wherever required ) all as specified. Note:- Putty shall be measured and paid seperately under relevant item

M&L for preparation of old decorated surfaces of wall by removing existing treatment of any description completely and applying one coat of Oil emulsion distemperall as specified

All as per item No. 15 above but on ceiling.

M&L for preparation of old painted surfaces of wood / wood based materials exceeding 10cm in width or girth and applying one coat of synthetic enamel paint all as specified.

All as per item No. 17 above but on steel surfaces. complete

M&L for preparation of old decorated surfaces of wall including brooming , scraping down smoke spot, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and applying one coat of exterior weather proof water base emulsion paint white/coloured over a coat of primer of same make over white cement based putty (wherever required ) all as specified Note:- Putty shall be measured and paid seperately under relevant item

M&L for preparation of old decorated surfaces of wall including brooming , scraping down ,smoke spot, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and applying two coats of exterior weather proof water base emulsion paint white/coloured over a coat of primer of same make over white cement based putty (wherever required ) all as specified Note:- Putty shall be measured and paid seperately under relevant item

M&L for providing and applying minimum 1mm thick Acrylic/WaterProofing Wall Putty over prepared surface to achive the surface even and smooth for painting.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all as specified and as directed .

M&L for PCC (1:2:4) type B0 using 12.5 mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floor, etc complete all as specified

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the primeses complete all as specified

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1: 6 complete all as specified

M&L for scratch free Glazed (Porcelain) Vitrified Tiles (GVT) / Polished Glazed Vitrified Tiles (PGVT) 9mm to 10mm thick (square or rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. Note : 1.Size and pattern / texture of GVT (Matt Finish) / PGVT(Glossy Finish) shall be approved by GE 2.Glazed Coating on GVT/PGVT shall not be less than 1mm.

All as per item No 27 above but as in skirting / dado with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified

M&L for glazed ceramic coloured tiles (Matt / Gloss finish) of size not less than 450x300x7 mm thick on vertical surfaces such as wall,dado,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 15 mm thick backing coat in CM 1:4 on fair faces of brick work mixed mixed with WPC PD Proof 101 LW (+) of Dr fixit or other equivalent integral water proofing admixture @ 200ml/bag complete all as specified Note :(a) PD Proof 101 LW (+) of Dr fixit shall be measured and paid seperately under relevant item (b) Pattern / Texture shall be approved by GE

Demolition of Stone slab and tile of any description or thickness in floors complete all as specified and as directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 25cmX25cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified

M&L for chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX40mm thick ,set and jointed and pointed in neat cement slurry in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified

M&L for machine cut kota stone slab in flooring 20 to 25mm thick laid over and including 15mm thick screed bed in CM 1:6 and pointed in cement mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified

M&L for 18 to 20 mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including polishing by using mechanical grinder and moulding edges complete all as specified

M&L for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M 35 Gde of approved shape, size and colour conforming to IS 15658-2006 and including joints filled with sand and stone dust 25mm thick as in levelling course complete all as specified

M&L for precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in kerb and edging to road and footh path, etc including necessay chamfering ,weathering, throating etc and setting in CM (1:4) complete all as specified

M&L for providing precast cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in louvers and jallies 50mm thick (measured solid) set in cement mortar (1:4) including all mouldings but excluding frame complete all as specified

S&F in repair Rotational moulded Polyethylene water storage tank 500 litres capacity (cylidrical vertical with closed top) three layered , hoisted and fixed in position all as specified in SSR part I complete all as specified

All as per item No 38 above but for 1000 litres capacity

S&F in repairs 15mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc complete all as specified

All as per item no 40 above but for 20mm bore

S&F in repair 15mm bore bib tap chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified

S&F in repair CP pillar taps (swan neck type) cast copper alloy CP with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified

S&F in repair CP wall mixer for mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified

S&F in repair vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified

S&F in repair vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe and lime concrete bedding including 'P' or 'S' trap complete all as specified

S&F in repairs PVC valveless,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified

S&F in repair health faucet with flexible pipe of one metre length including wall hook for holding complete all as specified

S&F in repair vitreous china wash hand basin white flat back of size 550mmx400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified

S&F in repairs vitreous china wash basin white oval shaped under counter of size 560mm x 410mm x 180 mm including 32mm brass CP waste coupling complete all as specified

S&F in repairs vitreous china wash basin white Table Top of size 460mmx350mm including 32mm brass CP waste coupling and all other fittings complete all as specified

Dismantling of Asbestos cement (corrugated, semicorrugated ) sheets in roof coverings complete all as specified and as directed.

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume / zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting /sunshade / wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and minimum 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

Dismantling of unframed timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section complete all as specified

S&F mild steel Hollow Section as in tubular trusses, purlins, rafter, tubular column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified

S&F mild steel Joist, channel, angle, tee or tubular sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming IS-1161-1979 grade ST-240 complete all as specified

S&F mild steel framed work such as grills, gratings with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F mild steel framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanksand fixing and similar work confirming to fe 290 Gde E-165 complete all as specified

M&L for preparation of new steel surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified

S&F Gypsum Board 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre on GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre inluding finishing the joint of face board with specially formulatted jointing compound and 48 mm wide fibre tape to provide seamless finish Ceiling shall be sealed at joints and finished with jointing compound etc complete including finishing the exposed surfaces of false ceiling with two coats of plastic emulsion paint over a coat of primer complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling of size 605mmx605mm with Hangers 6 mm dia. GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat of size 40 x 3 mm , 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

S&F Exposed metal frame ceiling with 6mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified.Note:Frame work for ceiling shall be measured and paid separately

S&F in repair 10 to 15mm thick Polycarbonate sheet in dome structure /similar condition with rubber neoprene /similar packing material fixed and packed with sheet complete all as specified

S&F stainless steel of required size and shape as per site requirement includng necessary all fixing arrangement complete all as specified

S&F Aluminium Composite Panel (ACP) any colour of exterior edge for sign board including pasting sticker / letter on board complete all as specified . Note : Size of Sign board and letters shall be approved by Engineer- in- charge.

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) area not exceeding 1.5 sqm each complete all as specified

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) area exceeding 1.5 sqm but not exceeding 4.0 sqm each complete all as specified

Taking down shutters of any description nexc 1 sqm each and removing from site complete all as specified and as directed.

Taking down shuters of any description exceeding 1 sqm but not exceeding 2 sqm each complete all as specified

S&F second class hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified

S&F Mild steel angle or flat iron, small articles such as hold fast , brackets, straps, cleats, etc for door/window chowkats Fe 410 W (gde E 250) quality 'A' including a coat of red oxide primer complete all as specified

M&L for plain cement concrete 1:3:6 type C1 using 20mm graded aggregate as in bed blocks of hold fast, etc complete all as specified

M&L for preparing surfaces of wood and wood based materials ,steel and iron work,new or old of any description area tarred exceeding 0.10 sqm but not exceeding 0.50 sqm each with tar or coal tar black paint

S&F 35mm thick second class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified

S&F 35 mm thick factory made second class hard wood glazed and skeleton door shutters open rebeated and prepared to received glass, gauzed, divided into squares with plain chamfered sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as specified in SSR Part-I Section 8, clause 8.24 (a) complete all as specified

S&F 30 mm thick factory made second class hard wood glazed and skeleton shutters, open rebeated and prepared to received glass, gauzed, with sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (b) for window and fixed with chowkats, chemically pressure treated complete all as specified

S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified

S&F as in repairs steel window with side hung shutter including projecting type hinges with steel handle, peg stay complete with glazing bars dovetailed or welded complete all as specified

S&F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jambs all around in CM 1:3 finishing even and smooth complete all as specified

M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F galvanised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised I wire staples complete all as specified

S&F in repair galvanized mild steel wire clothe 0.56 nominal dia of wire and average width of aperture 1.18mm fixed with beading complete all as specified

S&F sheet glass ordinary quality 3mm thick and glazing with oil putty in squares not exceeding 0.5 Sqm each complete all as specified

S&F 3mm thick figured glass pin head type in square not exceeding 0.5 sqm in each as in pane of ventilator / window shutter complete all as specified

Hacking out old broken glass ( any tickness size ,quality or description ) from wooden frame or stone etc and S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square not exceeding 0.50 sqm in each panes complete all as specified

S&F Mild steel butt hinge of size 100 mm medium weight cold rolled mild steel and fixed

S&F Mild steel butt hinge of size 75 mm medium weight cold rolled mild steel and fixed

S&F aluminum anodized barrel tower bolts of lenth 150 mm extructed section

S&F aluminum anodized barrel tower bolts of lenth 100 mm extructed section

S&F aluminum alloy handles fabricated type anodised of 150 mm long

S&F aluminum alloy handles fabricated type anodised of 100 mm long

S&F in repair second class hard wood plain fillets square, rectangular or triangular in section exceeding 6sqcm but not exceeding 13 sqcm ,clean sawn secured with nails or brads complete all as specified

S&F in repair second class hard wood plain fillets square, rectangular or triangular in section exceeding 13 sqcm but not exceeding 25 sqcm ,clean sawn secured with nails or brads complete all as specified

S&F in repair 12mmmm thick Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work completed all as specified.

S&F in repair 18/19 mm thick prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work completed all as specified.

S&F 100 mm hasp & staple safety type of aluminium anodised including bolt to hinges plate and fixed with screws

S&F in repair 25 mm dia mild steel PVC coated drappery curtain rod with brass /nickel chrom polish bracket for each curtain

M&L for rendering 15 mm thick in CM ( 1:4 ) mixed with WPC compound on wall / concrete surfaces finished even and smooth without using extra cement complete all as specified Note:WPC shall be measured and paid separetly under relevant item

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified

M&L for 25mm thick plain cement concrete 1:2:4 type B0 using 12.50mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified

All as per item No 103 above but as in skirting / dado etc over and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified

M&L for cleaning and removing all dirts and scales from water tanks excceeding 250 litres but not exceeding 500 litres capacity and from mouth of circulating pipes complete all as specified

M&L for cleaning and removing all dirts and scales from water tanks excceeding 500 litres but not exceeding 1000 litres capacity and from mouth of circulating pipes complete all as specified

S&F in repair for 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified

S&F in repair stop valves/ angle stop valve fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified

S&F in repair fancy type chromium plated 15mm bore two way angle valve cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified

S&F in repairs concealed stop valves fancy type chromium plated with long shanks and cup fixed with 15 mm dia bore pipes complete all as specified

S&F in repair 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipe

S&F in repair CP toilet paper holder

S&F in repairs vitreous china wash basin white oval shaped under counter of size 550 mm x 400mm including 32mm brass CP waste coupling complete all as specified

S&F in repairs PVC (SWR) floor trap plain or multi dia of outlet 75mm bore with stainless steel grating including joining to waste pipe complete all as specified

S&F in repairs CP grating 100mm dia including fixing with white cement in trap

S&F in repair sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste fitting including bedding layer in CM (1:6) in wall or including fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm complete all as specified

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.

S&F in repairs PVC waste pipe for wash basin/ sink 32/40mm bore ,65cm-90cm long

Dismantling PVC pipes 110 / 75 mm bore including fittings complete all as specified

S&F PVC (SWR) pipe 110mm dia single socketed in any length with rubber ring joints laid on wall / floor complete all as specified

S&F PVC (SWR) pipe 75mm dia single socketed in any length with rubber ring joints laid on wall / floor complete all as specified

S&F PVC ( SWR) bends any radius bore of 110 mm

S&F PVC ( SWR) bends any radius bore of 75 mm

S&F PVC ( SWR) junction single (single T / Y)equal or unequal 110mm dia

S&F PVC ( SWR) junction single (single T / Y) equal or unequal 75mm dia

M&L for cutting chases not exc 10cm in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good all as specified and directed

M&L for complete removal of existing treatment from wall (any number of layers) by scrapping with steel scrapper or any other means as approved and applying two coats of oil emulsion distemper over and including a coat of primer and a coat 1mm thick JK/BIRLA white wall care putty complete all as specified

S&F in repairs stainless steel hinges for modular kitchen shutters all as specified

S&F in repairs powder coated aluminium door seals 120 cm in length and 3 cm in width with rubber guasket at bottom of door all as specified and as directed.

M&L for preparation of old decorated surfaces of wall including brooming, washing, rubbing scraping down with complete removal smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of white wash on walls complete all as specified

All as per item No.131 above but on ceiling.

M&L for preparation of old decorated surfaces of wall including brooming, washing, roubbing scraping down. smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and apply two coats of oil emulsion distemper all as specified

Chitragupta Construction

GAUR ASSOCIATES

M/S Parikshit Sharma

M/S Sunshine Construction

BHATIA ASSOCIATES