DEVELOPMENT OF GANDHI VATIKA AT PATEL NAGAR EXTENSION (PHASE-I)

Amount

(G Schedule Amount) Please Fill BOQ2 Total Amount

(H Schedule Amount) Please Fill BOQ3 Total Amount

Bidder Name

Amount

Dilip Singh Chauhan(GSTN-08ABDPC8279K1ZA)

Black Stone Minerals(GSTN-08ADFPA2390H1ZT)

Description of Work / Item(s)

Amount

S&F of Precast kerb stone / road liner as per drawing enclosed in M-15 concrete smooth finished block fixed at site with C.M. 1:3 thickness of joint shall not be more than 5 mm and 20 mm thick bed of C.M. 1:6 complete in all respect with all lead and lift as per direction of Engineer incharge SIZE 400*450*150 MM

Supply and spreading and consolidation of laterite rock mineral of approved quarry (app. 150 kms lead work should be complete as per direction of engineer in charge

Construction of "Vishram Sthal" as per following specification and enclosed photograph. - Circular platform at ground level having overall dia not less than 7.66 Mtr. with 1.5Mtr. Width in annular shape footpath. - Plinth Level area 17 Sqm (dia. of circular platform not less than 4.66 Mtr.).- Plinth height 0.60Mtr. from ground level should be in three equal steps having rise 15cm with one side gentle slope ramp having width 1.0Mtr. and with side railing. - Ist roof level height should be not less than 3Mtr. from plinth level.- Total Covered area of Ist roof level not less than 21.50 Sqm.- Roof should be made in frustum of cone shape having frustum height 0.60Mtr. and thickness of roof slab should not be less than 0.125Mtr.- 2nd roof should be made not less than 2.0Mtr. dia. at bottom with 0.60Mtr. cone height at center.- Difference of level between both roofs should be not less than 1 Mtr.- Minimum 6 Nos. R.C.C. (M-20) circular columns having dia 0.23Mtr.with required reinforcement from plinth level to support Ist roof level having load bearing capacity of both roofs with required foundation.- The "Hut" should be facilitated with 1No. round sitting bench of 0.45Mtr. width and 0.10Mtr. thick should be made in R.C.C. of M-20.- R.C.C. work should be complete in M-20 with required reinforcement (not less than minimum) as per relevant IS code. All work should be ornamental and having natural look of wooden finishing with ornamental plaster in rich mortar, using white cement oxide color and bamboo/balli design with final finishing in touchwood color (two or more coats) as per photograph enclosed. With giving asthetic look. The job work should be complete as per direction of engineer incharge and upto satisfaction of engineer incharge.

Providing and fixing of brass sculpture of gandhi ji of height 8' in shape and size and proportion of other features and ornamental part of statue , all as per indicative drawings, photos and direction of Enginner-in-charge

Black Stone Minerals

Black Stone Minerals

Dilip Singh Chauhan