SPL REPAIRS TO EXTERNAL NEAR BLDG NO P-10 AND P-20 ATALTINHO OF HQ 2 STC AND PROVN OF DRAINAGE AND PUMPINGSYSTEM FOR RAINWATER HARVESTING SUMP UTILIZATION ATALTINHO AND RAINWATER SUMP IN BAMBOLIM AREA UNDER GEPANAJI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) complete all as specified and directed.

Demolition of cement concrete in below or above ground floor and paving n.exc 15 cm thk (unreinforced) complete all as specified and directed.

M&L for cement concrete type D 2 1:4:8 using 40mm graded stone aggregate 75mm thick as in flooring as in sub base etc complete all as specified and as directed.

M & L PCC 1:3:6 type C-1(20mm graded aggregate), 75mm thick as in flooring, Surface finished fair and smooth without using extra cement complete all as specified and as directed.

M&L for Endura maxgrip R11 Industrial tiles or its equivalent 10 mm thick (square/rectangular) area of each tiles equivalent or exceeding 0.09 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured to match including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of Brickwork or stone masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed

M&L for brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and as directed.

M & L rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:6 without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer ,as per manufacturer's specification complete all as specified and as directed.

Supply only of Factory made Pre-cast RCC (not less than M-35 concrete) drain covers with pores for passage of surface water of size 1000mm X 420mm X 70 mm thick, complete all as specified and directed.

Material and labour 3mm thick coloured cement mortar 1:2 over concrete floors for finish including polishing complete all as specified and directed.

Supplying and laying of 110mm PVC pipe single socketed in any length with rubber ring joints laid fittings on walls/ceiling or laying in floors complete all as specified.

Excavation of trenches in soft/disintegrated rock, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation, etc and getting out in complete all as specified and directed.

M&L for hardcore of gauge n. exe 63 mm deposited, spread, levelled in layers n. exe 15 cm thick, watered rammed to a true surface using broken bricks complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling and mass complete all as specified and directed.

M&L for Plain cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in drains, surface channels and the like including weathering, slightly rounded or chamferred angles and throating,sub layer as directed and provision of necessary form work complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/slopped ends etc complete all as specified and directed.

M&L rendering 15 mm thick on brick Masonry surface or other than fair surface of brick surface in CM (1:4) to be finished even & fair without using extra cement complete all as specified and as directed.

M&L for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/walls as soil pipe all as psecified and directed.

S&F 110mm PVC(SWR) bends complete all as specified and directed.

S&F 110mm PVC(SWR) bends with access door complete all as specified and directed.

Supply and fix PVC (SWR) floor trap with grating 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.

M & L for concrete bed of thickness 100mm and width outer dia plus 30mm in PCC 1:3:6 type C2 ( using 40 mm graded stone aggregate) to drain pipes 100mm including forming cradles complete all as specified and directed.

Cutting of bushes/Site clearence whereever required complete all as specified and as directed.

Material and Labour for Removing excavated material of soft and disintegrated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Material and labour for Surface dressing n exc 15 cm deep in loose and soft soils complete all as specified and as directed.

Excavation over areas, n exc 1.5 m deep and getting out in soft/Dis integrated rock complete all as specified and as directed.

Excavation over areas, exc 1.5 m and not exc 3.0m deep and getting out in soft/Dis integrated rock complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft disintegrated rock complete all as specified and as directed.

Material and labour Cement concrete of Type B2 1:2:4(40 mm graded aggregate) in foundations, filling and mass concrete complete complete all as specified and directed.

Material and labour for RCC (Mix design) of Grade M 30 as in Foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete all as speified and directed.

Material and labour for RCC (Mix design) of Grade M 30 as in Walls,retaining walls,basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttressesand mass concrete complete all as specified and as directed. Note: Construction joint/water bars are to be placed in the walls wherever reqd all as directed by Engg in charge.

Material and labour for RCC (Mix design) of Grade M 30 as in Slabs supported on walls,beams and columns in floors, roofs, landings,balconies, canopies,deck slabs and in shelves and the like complete all as specified and directed.

S & F TMT (CRS) steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F TMT (CRS) steel bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, columns, beams etc. complete complete all as specified and directed.

S & F Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed.

S & F GI pipes Heavy Class of dia 100mm complete all as specified and directed.

M&L for 15mm thick plastering in CM (1:4) with water proofing compound on fair faces of bricks or concrete surfaces finished even and smooth w/o using extra cement complete complete complete all as specified and directed. (Water proofing compound will measured and paid separately)

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two or more coats with 100% premium acrylic emulsion paint having VOC content less than 50 gms/litre and UV resistance as per IS 15489:2004, alkalie and fungal resistance, dirt resistance, exterior paint of required shade with silicon additives @ 1.43L/10sqm over and including priming coat of exterior primer applied at 0.9L/10sqm complete all as specified and as directed.

Material and labour for Cast iron work grade FG 150,and article n exc 5Kg each unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and as directed.

Providing injection grouting by nozzles of 12mm dia by drilling length equal to half the depth of concrete.The non shrink polymeric water proof groutingg compound(Cico,asianpaints or equivalent) mixed with cement slurry and injected through nozzles under the pressure not exceeding 2kg/Sqm to ensure that grount runs all the pores and cracks in the concrete there by sealing them complete all as specified and as directed.

Supply and laying galvanised steel water tubing of medium grade of dia 40mm with and including all fittings such as bends, elbows, tees, unions, niples, short pieces etc as required at site laid in trenches complete all as specified and directed.

Supply and laying galvanised steel water tubing of medium grade of dia 25mm with and including all fittings such as bends, elbows, tees, unions, niples, short pieces etc as required at site laid in trenches complete all as specified and directed.

Supply and laying galvanised steel water tubing of medium grade of dia 20mm with and including all fittings such as bends, elbows, tees, unions, niples, short pieces etc as required at site laid in trenches complete all as specified and directed.

Supply and Install high Performance Submesible single Phase 2 HP Open Well Pump with Control Panel 1.5 kW, corded Electric 210V ,50Hz AC Power Supply Head Range (14-42 mtr) max flow Range (15120 LPH) Stainless Suction Delivery 32 x 25 mm ,Speed 2800 RPM ,Shaft Material Stainless Steel ,impeller Cast Iron/Ivory including flange,Nipple bend, reducer etc requied for Connectction complete all as specified and as directed.

Excavation trenches in Hard/ dense not exc. 1.5m wide and not exc.1.5m in depth all as directed by Engr-in-Charge and getting out hard/ dense soil for laying of cable, foundation etc.and complete all as specified and as directed.

Returning and filling in excavated soil in trenches including spreading leveling watering and well ramming in layers not exceeding 25cm complete all as specified and as directed.

Removing of excavated materials i.e surplus soil not exc 50M and depositing where directed at a level not. Exc. 1.5M above the starting point and complete all as specified and as directed.

Supply and fix gun metal gate valve 40mm dia heavy duty ISI marked with iron wheel head screwed both ends for iron pipe with all fittings complete all as specified and directed.

Supply and fix gun metal gate valve 25mm dia heavy duty ISI marked with iron wheel head screwed both ends for iron pipe with all fittings complete includi complete all as specified and directed.

M & L cement concrete (1:2:4) type B2 using 40 mm graded stone aggregates in coping and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including use of formwork complete all as specified and directed.

Supply and Fix Bib type cast iron screwed for iron pipe fixed complete all as specified and as directed.

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of 6 sqmm 4 core in trenches,road, PCC or on wall complete all as specified and directed.

M&L for HDPE DWC Pipes for laying in trenches for Protection of cable of sizes- 40mmX 32mm complete all as specified and directed.

Supply and fix Flat 3 Core 4 sqmm PVC Copper Cable for Submersible Connection complete all as specified and directed.

S & F for Sheet Metal Enclosure MCB DB SPN 4 Way, IP 43,IK 09, with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in Wall by cutting the brick/stone masonary etc & taking down of unsv DB and making good of disturbed surface to match with existing colour of wall complete complete complete all as specified and directed.Note:- The space left after inserting MCB should be properly filled with blanking plate complete all as specified and as directed.

Supply and fix for MCB Single Pole & neutral rated capacity 32Amp,240 Volts10KA breaking capacity 10 KA , 'C' curve connected with suitable lugs complete all as specified and as directed.

Supply and fix for MCB Single Pole rated capacity 20Amp ,240 Volts10KA breaking capacity 10 KA , 'C' curve connected with suitable lugs complete all as specified and as directed.

S&F GI tubing light grade 40 mm dia bore for protection of cable fixed in wall or road crossing or laid in trenches complete all as specified and as directed.

SLB Enterprises (BID ID -3509010)

rana construtions (BID ID -3509512)