Replacement of Deteriorated Ceiling and Paneling

Amount

Fixing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).(A): Cat-II(A) timber: ceiling and wall panelling, Frame for glass Panelling. Excluding sawn timber. Sawn timber would be supplied by the department. Rate invites for labour component only.

Fixing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). (B): Padauk Wood Frame Work: Door, Window TH, Window DH, Door. Excluding sawn timber. Sawn timber would be supplied by the department. Rate invites for labour component only.

Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). 5.0 mm thick instead of 4 mm thick: Window(TH) W, Window(DH) W1

Providing fixing of Acrylic glass panes to cover the open space. 12 mm thick

Fixing 12 mm thk. Padauk wood plank board ceiling with group cutting and fixing with iron nails , screws with Polishing of New paduk surface before polishing well sandering the walls with 40,65 and 120 Nos sand papers after sandering thewhole surface fixed one coat of Wax polish and rub it out than coating of shenlac polish with brush after coating the shenlac polish again smoothing the surface with sand paper tahn recoating the shenlac polish and final coating with wood polish with brush or spray machine all works coplete. Ceiling board with Padauk wood: Drawing Room, Enterance Gallery, Bed Room-3. Sawn timber would be supplied by the department. Rate invites for labour component only.

Fixing 12 mm thk. Padauk wood plank board panelling with group cutting and fixing with iron nails, screws.(Frame work take seprately) andNew paduk surface before polishing well sandering the walls with 40,65 and 120 Nos sand papers after sandering the whole surface one coat of mansion polish and rub it out than coating of shenlac polish with brush after coating the shenlac polish again smoothing the surface with sand paper than recoating the shenlac polish and final coating with wood polish with brush or spray machine all works coplete. Panelling board with Padauk wood: Drawing Room. Dinning Room, Pooja Room, Area above stair case, Bed Rood-1, Bed Room-2, Gallery, Colum. Covering. Sawn timber would be supplied by the department. Rate invites for labour component only.

Fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 35 mm thick shutters: Door, Window TH, Window DH. Sawn timber would be supplied by the department. Rate invites for labour component only.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). Window(TH) W, Window (DH) W1

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm

Providing and fixing bright finished brass handles with screws etc. complete: 125 mm: Door (D1)

Providing and fixing bright finished brass handles with screws etc. complete: 100 mm: Window (TH) W, Window (DH) W1

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm: Door (D1)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 100x10 mm: Window (TH) W, Window (DH) W1

Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 200 mm weighing not less than 240 gms: Window (TH) W, Window (DH) W1

Removing of Deteriorated Ceiling and timber walls for preparing the site for modification.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills ,diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks): Bed Room-1, Bed Room-2

Lumpsum amount for Electrification Works all complete i.e.( Ceiling Lights, Tube Lights, MCBs , Isolator,sockets,Switch, Gang Box, including wiring ,etc.. Whatever necessary at the time of work execution )as per direction of Engineer-in-charge.

SAYARA ACCESSORIES