Repairs and extension of baggage scanner room and check in counter at thirty gate

HINDUSTAN AERONAUTICS LIMITED BANGALORE AIRPORT SERVICES CENTRE

NAME OF THE WORK: "Repairs and Extension of Baggage scanner room and Check in counter at 30 Gate, Providing MS emergency stair case to MET dept. and miscellaneous repairs in ASC, HAL (BC). Cont. No: ASC/CIV-02/24-25"

Name of the Tenderer:

Sl. No Specification Quantity Unit Rate in Figs [Including GST] Rate in words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The tenderer shall abide by prevailing GST act. (2) This BOQ specifications have to be read in conjunction with detailed technical specification and tender drawings if any. (3) The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered. (4) The quoted percentage for the works mentioned below, shall be taken into consideration for evaluation of the tender. The lowest offer (L-1) will be determined considering the total amount including GST based on the quoted percentage.

1 Demolishing Cement Concrete 1:3:6 or richer mix manually / by mechanical means including disposal of Material within 50 meters lead as per direction of EIC- 5.00 Cu.M 2007.23 Rupees Two Thousand Seven and Twenty Three Paise Only 10036.15

2 Dismantling Doors, Windows and clerestory windows (Steel or wood) shutter including chowkhats, architrave holdfasts etc complete and stacking within 50 meters lead of area 3sqm and below complete as per direction of EIC- 15.00 Sqm 302.79 Rupees Three Hundred Two and Seventy Nine Paise Only 4541.85

3 Dismantling Tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead for thickness of tiles 10mm to 25mm etc complete as per direction of EIC- 5.00 Sqm 60.53 Rupees Sixty and Fifty Three Paise Only 302.65

4 Demolition of brick work in cement masonry manually/ by mechanical means including stacking of serviceable material and disposable of unserviceable material within 50 m lead as per the direction of EIC 5.00 Cu.M 1698.79 Rupees One Thousand Six Hundred Ninety Eight and Seventy Nine Paise Only 8493.95

5 Dismantling of GI pipes(external works) including excavation and refilling trenches after taking out the pipes,manually/ by mechanical means including stacking of pipes with in 50m lead as directed by EIC 15mm to 40mm dia 15.00 rm 123.53 Rupees One Hundred Twenty Three and Fifty Three Paise Only 1852.95

6 Disposal of surplus earth/moorum/building rubbish/ malba(debriswaste)/ similar unserviceable, dismantled or waste material of partitions,ceiling boards,tiles,frames etc by mechanical transport including loading, transporting, unloading in all lifts/loads upt 10 km distance from HAL. completely as per directions of Engineer-in-charge. 5.00 Cum 407.42 Rupees Four Hundred Seven and Forty Two Paise Only 2037.10

7 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing etc., (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m with all labour, tools & tackles, plant & machinery, hire & fuel charges etc.,all complete as directed by Engineer-incharge. 10.00 Cu m 146.37 Rupees One Hundred Forty Six and Thirty Seven Paise Only 1463.70

8 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains, pipes, cables etc. in all kinds of soils (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m with all labour, tools & tackles, plant & machinery, hire & fuel charges etc., all complete as directed by Engineer-incharge. 5.00 Cu m 214.64 Rupees Two Hundred Fourteen and Sixty Four Paise Only 1073.20

9 Returning / filling in with useful excavated soil (excluding rock), free from salts, organic or other deleterious matter (Other than black cotton soil & rock etc., in trenches, plinth,sides of foundations etc., spreading in layers not exceeding 20 cm thick, watering, breaking / removing clods exceeding 50 mm, ramming and consolidation of each deposited layer etc., with all labour, tools & tackles, plant & machinery, etc., lead upto 50 m and for all lifts, all complete as directed by the Engineer-in-Charge. 5.00 Cu m 161.62 Rupees One Hundred Sixty One and Sixty Two Paise Only 808.10

10 Supplying, mixing and placing plain cement concrete (1:4:8) (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate) of required thickness using 40 mm down graded hard stone/granite aggregate in accordance with IS 456 in foundations, mass concrete, sub bases and other similar works including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., but excluding the cost of centering, shuttering and finishing, all complete as directed by the Engineer-in-Charge. 5.00 Cu m 5617.02 Rupees Five Thousand Six Hundred Seventeen and Two Paise Only 28085.10

11 Supplying, mixing and placing plain cement concrete (1:2:4) (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate) of required thickness using 20 mm nominal size down graded hard stone/granite aggregate in accordance with IS 456 in posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor,plinth area etc including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., but excluding the cost of centering, shuttering and finishing, all complete as directed by the Engineer-in-Charge. 3.00 Cu m 8159.35 Rupees Eight Thousand One Hundred Fifty Nine and Thirty Five Paise Only 24478.05

12 Supplying, straightening, fabricating (cutting & bending), placing in position and binding steel reinforcement of TMT bars of not less than Fe 500 D conforming to IS 1786 for all concrete reinforcment members / works above/below plinth level, including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge.Note : a) Only authorized laps, chairs etc. shall be considered for measurement. b) The exposed Reinforcement bars shall be coated with cement slurry. 1450.00 Kgs 88.94 Rupees Eighty Eight and Ninety Four Paise Only 128963.00

13 Providing and laying in position ready mixed or site batched M25 Grade with minimum cement content of 330 kg/m3 design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, PortlandPozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, consolidation, levelling, curing, scaffolding, all materials, labour, carriage for all leads & lifts; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge. Note: (i) Mix design to be obtained from Govt. / NABL laboratory for site batching concrete.

13 All works upto plinth level like footing,pedetsal,piles,plinth beam,flooring,including necessary openings and packing if any for laying pipes, cables etc. 5.00 Cu M 7837.39 Rupees Seven Thousand Eight Hundred Thirty Seven and Thirty Nine Paise Only 39186.95

14 All works above plinth level column,beams,slabs,canopy,chajja,stairscase etc. level including necessary openings and packing if any for laying pipes, cables etc. 20.00 Cu M 8130.66 Rupees Eight Thousand One Hundred Thirty and Sixty Six Paise Only 162613.20

15 Formwork by providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete etc as per drawing., all complete as directed by the Engineer-in-Charge Note :Formwork material is contractor's own property and shall be removed after completion of work.

15.1 Foundations,pile caps,footings, bases of columns/pedestal,flooring,for mass concrete etc. 25.00 Sq m 323.36 Rupees Three Hundred Twenty Three and Thirty Six Paise Only 8084.00

15.2 Lintels, beams, plinth beams, girders, bressumers and cantilevers 25.00 Sq m 607.22 Rupees Six Hundred Seven and Twenty Two Paise Only 15180.50

15.3 Suspended floors, roofs, landings, balconies and access platform catwalk,brackets etc 35.00 Sq m 764.58 Rupees Seven Hundred Sixty Four and Fifty Eight Paise Only 26760.30

16 Supplying and laying Brick work with common burnt clay machine moulded modular bricks of class designation 7.5 for walls,chambers,ducts,drains etc awith CM(1:6) t all levels & heights including hoisting and setting in position and along with necessary formwork, curing, finishing, making or leaving holes & chases and making making horizontal and vertical grooves 10 mm wide 12 mm deep before plastering all complete as directed by the Engineer-in-Charge. 18.00 Cu M 5190.84 Rupees Five Thousand One Hundred Ninety and Eighty Four Paise Only 93435.12

17 Supplying and laying Half Brick work with common burnt clay machine moulded modular bricks of class designation 7.5 for walls,chambers,ducts etc with CM(1:4) at all levels & heights including hoisting and setting in position and along with necessary formwork,steel rod placement between every 4th course, curing, finishing, making or leaving holes & chases and making making horizontal and vertical grooves 10 mm wide 12 mm deep before plastering all complete as directed by the Engineer-in-Charge. 5.00 Sq m 926.67 Rupees Nine Hundred Twenty Six and Sixty Seven Paise Only 4633.35

19 Providing and fixing Granite stone slab of with (18mm to 25mm thick), area of slab not less than 0.5sqm, like Ruby Red/Black/Cherry with gang saw cut, mirror polished, premoulded and prepolished, machine cut for platforms, vanity counters, and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels as per direction of Engineer-in-charge. 2.00 Sq m 4463.85 Rupees Four Thousand Four Hundred Sixty Three and Eighty Five Paise Only 8927.70

20 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat.Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.complete as per direction of Engineer-in-charge. 6.00 RM 470.79 Rupees Four Hundred Seventy and Seventy Nine Paise Only 2824.74

21 Providing and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish including accessories made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856 of approved brand/type, complete as per direction of Engineer-in-charge. 2.00 Sq m 3701.48 Rupees Three Thousand Seven Hundred One and Forty Eight Paise Only 7402.96

21.1 Providing and fixing bright finished brass handles of 125mm size with screws etc.complete as per direction of Engineer-in-charge. 6.00 Each 211.63 Rupees Two Hundred Eleven and Sixty Three Paise Only 1269.78

21.2 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete as per direction of Engineer-in-charge. . 4.00 Each 100.31 Rupees One Hundred and Thirty One Paise Only 401.24

21.3 Providing and fixing bright finished brass tower bolts of 250x10mm (barrel type) with necessary screws etc. complete as per direction of Engineer-in-charge. 4.00 Each 364.14 Rupees Three Hundred Sixty Four and Fourteen Paise Only 1456.56

21.4 Providing and fixing bright finished brass 100 mm mortice latch and lock with (min.4 to 6 Levers) and a pair of lever handles of approved quality with necessary screws etc. complete as per direction of Engineer-in-charge. . 2.00 Each 704.72 Rupees Seven Hundred Four and Seventy Two Paise Only 1409.44

21.5 Providing and fixing aluminium sliding door bolts(aldrop) of 250 x16mm , ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. 6.00 Each 214.88 Rupees Two Hundred Fourteen and Eighty Eight Paise Only 1289.28

21.6 Providing and fixing 20mm dia chromium plated brass curtain rod /Towel rail of 1800mm long having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary. 3.00 Each 583.68 Rupees Five Hundred Eighty Three and Sixty Eight Paise Only 1751.04

21.7 Providing and fixing M.S. grills with made of M.S. flats, square or round bars to openings of required pattern/ frames of windows with rawl plugs screws etc. including priming coat with approved steel primer all complete. 50.00 Kgs 196.53 Rupees One Hundred Ninety Six and Fifty Three Paise Only 9826.50

Steel Work Welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ateel etc., as required. In stringers, treads, landings etc of stair cases, including use of chequered plate wherever required all complete. SSR-10.25.1 2000.00 Kgs 101.92 Rupees One Hundred One and Ninety Two Paise Only 203840.00

23 Providing and laying Glazed Vitrified floor tiles of Size (600 X 600 mm) or standard availabe size with Joint in different sizes ( Thickness to be sepcified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 course sand), including grouting the joints with grey cement slurry @ 3.3 Kg/Sqm including grouting the joints with white cement and matching pigments etc. all, complete as per instructions of Engineer Incharge. 75.00 Sq m 1207.88 Rupees One Thousand Two Hundred Seven and Eighty Eight Paise Only 90591.00

24 Providing and laying Vitrified tiles using various sized tiles or (600mm X 600mm) Matt/Antiskid finish (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3(1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc., complete as per direction of Engineer-in-charge. 12.00 Sq m 1338.33 Rupees One Thousand Three Hundred Thirty Eight and Thirty Three Paise Only 16059.96

25 Providing and fixing Single socketed pipes of 110mm diameter unplasticised Rigid PVC water pipes conforming to IS : 13592 Type A of approved brand, on wall/floor including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion .complete as per direction of Engineer-in-charge. 20.00 metre 311.19 Rupees Three Hundred Eleven and Nineteen Paise Only 6223.80

27 Plastering to internal brick/block wall with 15 mm thick on the rough side of single or half brick wall of cemnet mortor (1:6) including leveling,curing and making the level smooth and at all heights, plaster drip course/ groove in plastered surface or moulding to R.C.C. projections and execute the work complete as per direction of Engineer-in-charge. 250.00 Sq m 315.81 Rupees Three Hundred Fifteen and Eighty One Paise Only 78952.50

28 Plastering to ceiling with 12 mm thick on the rough side with cemnet mortor (1:4) including leveling,curing and making the level smooth and at all heights and execute the work complete as per direction of Engineer-in-charge. 60.00 Sq m 286.17 Rupees Two Hundred Eighty Six and Seventeen Paise Only 17170.20

29 Plastering to external brick/block wall with 18 mm cement plaster in two coats under layer 12 mm thick cement plaster on the rough side with cement mortor 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).including leveling,curing and making the level smooth and at all heights, plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.The work to be completed as per direction of Engineer-in-charge. 200.00 Sq m 427.58 Rupees Four Hundred Twenty Seven and Fifty Eight Paise Only 85516.00

30 Providing and mixing water proofing material in plaster work in proportion recommended by the manufacturers like Roff,Fosroc,Basf,Dr.Fixit.The work to be completed as per direction of Engineer-in-charge. 100.00 Per bag of 50Kg cement used in mix 18.22 Rupees Eighteen and Twenty Two Paise Only 1822.00

31 Providing and applying internal wall and ceiling painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50grams/ litre after applying white cement based putty of average thickness 1mm over the plastered wall surface including preparation of the surfces, with a coat of low VOC primer with emery paper to bring to smooth and even including applying additional coats wherever required to achieve even shade and colour of approved brand,complete as per direction of Engineer-in-charge. 200.00 Sq m 307.40 Rupees Three Hundred Seven and Forty Paise Only 61480.00

32 Providing and Finishing walls with Acrylic Smooth exterior paint of required shade for New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including scrapping,preparationof surface for completing the work as per direction of Engineer-in-charge. 150.00 Sq m 132.42 Rupees One Hundred Thirty Two and Forty Two Paise Only 19863.00

33 Providing and applying synthetic enamel paint for pipes ,grills,chequered plate,etc in Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture,filling joints,metal patti etc ,complete as per the direction of Engineer-in-charge. 50.00 Sq m 244.57 Rupees Two Hundred Forty Four and Fifty Seven Paise Only 12228.50

34 Providing and fixing C.P. brass toilet paper holder of approved brand and fixing with screws,raw plugs etc.complete as per direction of Engineer-in-charge. 3.00 Each 662.71 Rupees Six Hundred Sixty Two and Seventy One Paise Only 1988.13

35 Providing and fixing beveled edge mirror of size 600x450mm of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per direction of Engineer-in-charge. . 2.00 Each 1325.88 Rupees One Thousand Three Hundred Twenty Five and Eighty Eight Paise Only 2651.76

36 Providing and fixing Wall hung half pedestal Vitreous China Wash basin size of approx size 630x450 mm fixed with with C.I. brackets/rack bolts , single 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste coupling of standard pattern,P.V.C. waste pipe with waste fittings of 40mm dia and make it function of approved brand/make, including painting of fittings and brackets, cutting and making good the walls wherever required.complete as per direction of Engineer-in-charge. 2.00 Each 1932.03 Rupees One Thousand Nine Hundred Thirty Two and Three Paise Only 3864.06

37 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) of approved brand with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all connecting fittings and fixtures to make it operational completely, including cutting and making good to the walls and floors wherever required complete as per direction of Engineer-in-charge. 2.00 Each 5372.57 Rupees Five Thousand Three Hundred Seventy Two and Fifty Seven Paise Only 10745.14

38 Providing and fixing 8 mm dia C.P. / S.S. Jet (Health Fuacet) with flexible tube upto 1 metre long with S.S. triangular plate on walls/Eureopean type W.C. material of approved make and quality all as per instructions of Engineer - in - charge. 4.00 Each 287.90 Rupees Two Hundred Eighty Seven and Ninety Paise Only 1151.60

39 Providing and fixing white colour wall hung vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption approx.), having water inlet from back side, including fixing to wall with brackets embedded in cement mortar (1:3), connecting the waste pipe/waste coupling to floor trap with all necessary fittings and accessories like 32 mm dia semi-rigid PVC waste pipe(concealed in the wall) including PVC waste fittings, clamps etc all as per manufacturers specification and direction of Engineer-in-charge. 2.00 Each 6665.14 Rupees Six Thousand Six Hundred Sixty Five and Fourteen Paise Only 13330.28

40 Providing, fixing, testing and commissioning trap ( floor trap ) of approved make with 100 mm inlet and 75 mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors , connection with PVC soil / waste pipe, necessary 150 mm thick cement concrete (1:2:4) for embedding the trap,etc.,all complete as directed by the Engineer-in-Charge. 6.00 Each 487.65 Rupees Four Hundred Eighty Seven and Sixty Five Paise Only 2925.90

41 Constructing masonry Chamber (60x60x75cm) inside or outside (or approx. size as per site condition) , in brick work of class designation 7.5. in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design,complete as per direction of Engineer-in-charge. 2.00 Each 8956.88 Rupees Eight Thousand Nine Hundred Fifty Six and Eighty Eight Paise Only 17913.76

42 Providing and fixing 15mm nominal bore dia C.P. brass bib cock of approved quality conforming to IS:8931, all complete as directed by the Engineer-in-Charge. 6.00 Each 417.90 Rupees Four Hundred Seventeen and Ninety Paise Only 2507.40

43 Providing and fixing Concealed Chlorinated Polyvinyl Chloride (CPVC) pipes of approved brand, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing, necessary reducers, tank adaptors etc. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls etc as per direction of Engineer in Charge.

43.1 15 mm dia 20.00 RM 410.47 Rupees Four Hundred Ten and Forty Seven Paise Only 8209.40

43.2 20 mm dia 25.00 RM 443.29 Rupees Four Hundred Forty Three and Twenty Nine Paise Only 11082.25

43.3 25 mm dia 20.00 RM 517.21 Rupees Five Hundred Seventeen and Twenty One Paise Only 10344.20

43.4 32 mm dia 18.00 RM 609.61 Rupees Six Hundred Nine and Sixty One Paise Only 10972.98

44 Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms(or nearest availabe size and weight). 2.00 Each 91.90 Rupees Ninety One and Ninety Paise Only 183.80

45 Providing and laying & jointing stoneware pipes of 250 mm dia SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1Cement :1 fine sand) including testing of joints etc complete and as per the direction of Engineer Incharge. 10.00 Rmt 1241.48 Rupees One Thousand Two Hundred Forty One and Forty Eight Paise Only 12414.80

46 Making connection of drain or sewer line with existing manhole (For pipes 100 to 250 mm diameter)including breaking into and making good the walls, floors with cementconcrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete as per the direction of Engineer Incharge. 3.00 Each 668.28 Rupees Six Hundred Sixty Eight and Twenty Eight Paise Only 2004.84

47 Providing and Supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474, including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the EIC. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment. 100.00 Kgs 341.62 Rupees Three Hundred Forty One and Sixty Two Paise Only 34162.00

48 Providing assembling and supplying vision glass panels (IGUs) comprising of hermetically - sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6 mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12 mm wide, dessicants, including primary seal and secondary seal (Structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as direcetd by the EIC. The IGUs shall be assembled in the factory / workshop of the glass processor. (Payment for fixing of IGU panels in the curtain glazing is included in cost of item no. 25.2). For payment, only the actual area of glass on face # 1 or the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in Sqm. (i) Coloured tinted float glass 6 mm thick substrate with reflective soft coating on face #2, +12mm Airgap + 6mm Heat strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20%, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. 75.00 Sqm 3066.36 Rupees Three Thousand Sixty Six and Thirty Six Paise Only 229977.00

Sub-Total (Exculding GST) Rupees Fifteen Lakh Sixty Eight Thousand Seven Hundred Sixty Four and Seventy Two Paise Only 1568764.72

Add: 18% GST on Basic Rupees Two Lakh Eighty Two Thousand Three Hundred Seventy Seven and Sixty Four Paise Only 282377.65

Sub-Total (including GST) Rupees Eighteen Lakh Fifty One Thousand One Hundred Forty Two and Thirty Six Paise Only 1851142.37

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 1851142.37 BELOW %

The above Rates includes 18% GST

Grand Total (Including GST) 0.00

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE