8294 REPAIR PAINTING TO ALL TYPES OF STEEL FURNITURE AT BSO FURNITURE YARD AND VARIOUS UNITS UNDER GE NW KUNJALI

Amount

Almirah large steel with shelves (steel/glazed door)(DGS&D, FD-67, FD-1031 FD-1033, FD-1037)

M&L for removing of unsv/broken handles and providing new handle steel chromium plated for almirah large steel with shelves

M&L for removing of unsv lock with keys and providing new MS lock of size 50mm, 6 levers with stainless steel keys in duplicate for almirah large steel with shelves

M&L for removing of unsv legs and providing new legs made out of 18 guage MS sheet duly painted with two coat Synthetic enamel paint over a coat of red oxide primer and welding it to almirah large steel with shelves.

M&L for removing of unsv shelves, of almirah large steel with shelves and making new shelves out of 20 guage black MS sheet duly painted with 2 coats synthetic enamel paint over a coat of red oxide primer as required at site and providing with necessary cleats/bolts & nuts.

M&L for removal of existing worn out painting from in side & outside including preparation of surface frame complete and applying two coats of 1st quality synthetic enamel paint of smoke grey shade over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Almirah medium steel with shelves (FD-67/104/243/1032)

M&L for removing of unsv/broken handles and providing new handle steel chromium plated for almirah medium steel with shelves

M&L for removing of unsv lock with keys and providing new MS lock of size 50mm, 6 levers with stainless steel keys in duplicate for almirah medium steel with shelves

M&L for removing of unsv legs and providing new legs made out of 18 guage MS sheet duly painted with two coat Synthetic enamel paint over a coat of red oxide primer and welding it to almirah medium steel with shelves.

M&L for removing of unsv shelves, of almirah medium steel with shelves and making new shelves out of 20 guage black MS sheet duly painted with 2 coats synthetic enamel paint over a coat of red oxide primer as required at site and providing with necessary cleats/bolts & nuts.

M&L for removal of existing worn out painting from in side & outside including preparation of surface frame complete and applying two coats of 1st quality synthetic enamel paint of smoke grey shade over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Locker Steel (FD-257 & FD-1029)

M&L for removing of unsv/broken handles and providing new handle steel chromium plated for locker steel

M&L for removing of unsv lock with keys and providing new MS lock of size 50mm, 6 levers with stainless steel keys in duplicate for locker steel

M&L for removing of unsv legs and providing new legs made out of 18 guage MS sheet duly painted with two coat Synthetic enamel paint over a coat of red oxide primer and welding it to locker steel

S&F in repair to MS butt Hinges 75mm long complete all as specified and directed

S&F in repair to Chromium plated Hasp & Staple of size 75mmx40mmx3mm complete all as specified and directed

M&L for removal of existing worn out painting from in side & outside including preparation of surface frame complete and applying two coats of 1st quality synthetic enamel paint of smoke grey shade over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Locker Steel Double Shutter with Independent Locking Device (GE (K) FD - 126)

M&L for removing of unsv/broken handles and providing new handle steel chromium plated for locker steel double shutter

M&L for removing of unsv lock with keys and providing new MS lock of size 50mm, 6 levers with stainless steel keys in duplicate for locker steel double shutter

M&L for removing of unsv legs and providing new legs made out of 18 guage MS sheet duly painted with two coat Synthetic enamel paint over a coat of red oxide primer and welding it to locker steel double shutter

M&L for removal of existing worn out painting from in side & outside including preparation of surface frame complete and applying two coats of 1st quality synthetic enamel paint of smoke grey shade over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Locker Steel 6 unit with hanging arrangement (TP)

M&L for removing of unsv legs and providing new legs made out of 18 guage MS sheet duly painted with two coat Synthetic enamel paint over a coat of red oxide primer and welding it to locker steel 6 unit

M&L for removal of existing worn out painting from in side & outside including preparation of surface frame complete and applying two coats of 1st quality synthetic enamel paint of smoke grey shade over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Book shelf open large steel (FD-69)

M&L for removal of existing worn out painting from including preparation of surface frame complete and applying two coats of 1st quality synthetic enamel paint of smoke grey shade over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Book shelf open small steel (FD-69)

M&L for removal of existing worn out painting from including preparation of surface frame complete and applying two coats of 1st quality synthetic enamel paint of smoke grey shade over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Book case steel (FD-90/1028)

M&L for removing of unsv/broken handles and providing new handle steel chromium plated for book case steel

M&L for removing of unsv lock with keys and providing new MS lock of size 50mm, 6 levers with stainless steel keys in duplicate for book case steel

M&L for removal of existing worn out painting from including preparation of surface frame complete and applying two coats of 1st quality synthetic enamel paint of smoke grey shade over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Cabinet filling 4/2 drawer & Cabinet filling vertical/lateral & multipurpose cabinet (TP)

M&L for removing of unsv lock with keys and providing new MS lock of size 50mm, 6 levers with stainless steel keys in duplicate for cabinet filiing

M&L for removal of existing worn out painting from including preparation of surface frame complete and applying two coats of 1st quality synthetic enamel paint of smoke grey shade over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Ward Care Bed Side Locker (TP)

M&L for removing of unsv/broken handles and providing new handle steel chromium plated for ward care bed side locker

M&L for removing of unsv lock with keys and providing new MS lock of size 50mm, 6 levers with stainless steel keys in duplicate for ward care bed side locker

M&L for removing of unsv legs and providing new legs made out of 18 guage MS sheet duly painted with two coat Synthetic enamel paint over a coat of red oxide primer and welding it to ward care bed side locker .

M&L for removal of existing worn out painting from including preparation of surface frame complete and applying two coats of 1st quality synthetic enamel paint of smoke grey shade over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Storage Rack (TP)

M&L for removal of existing worn out painting from including preparation of surface frame complete and applying two coats of 1st quality synthetic enamel paint of smoke grey shade over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Charpoy GI pipe with plywood top (FD-220)

Removing unserviceable Ply top from GI charpoy, tightening complete charpoy ie loose checknuts, elbows, Long Rails and short Rails and supply and fixing ply wood of 12mm thick, 7 Ply, commercial Type, MR Grade, ISI Marked of size 1980x900mm complete all as specified and directed. Make- greenply/ Century/ Kitply .

M&L for removing old unserviceable long rail from GI charpoy and supply and fixing new long rail of size 1884mm long made out of 32 mm bore medium grade GI Pipe duly threaded on both ends and fixing to charpoy completely all as specified and as directed. Note;- 1)The items includes threading both sides in new long rail and 2) Old unserviceable long rail obtained shall be reused in Item No 12.3 below.

M&L for removing old unserviceable short rail from GI charpoy and fixing new short rail of size 814mm long made out of long rails retrieved vide items No (2) herein duly threaded on both ends & fixing to charpoy completely all as specified and directed. Note ;- 1) The items includes threading both sides in new short rail & 2) Old unserviceable short rail obtained shall be reused in Item No 12.4 below.

M&L for removing old unserviceable legs from GI Charpoy and fixing new legs of size 394 mm long made out of short Rails retrieved vide item No (3) herein duly threaded on one end including 3mm thick MS sheet( made to shape of the bottom) in bottom and two Nos clamps as shown on Drg by welding completely all as specified and directed.

M&L for removing old unserviceable three way elbow and supply and fixing new elbow 32 mm bore (ISI marked) to GI charpoy, complete all as specified and as directed.

M&L for removing old unserviceable check nuts and supply and fixing new check nuts 32 mm bore 6mm thick to GI Charpoy, all as specified and as directed.

M&L for removing old unserviceable legs from GI charpoy and fixing new leg of size 394 mm duly threaded one end and including 3 mm thick MS Sheet ( made to shape at the bottom) in bottom two nos clamps ( as shown in drawing) by welding completely all as specified and directed by Engineer-in-charge

Bed Hard Steel (FD/E6/MAP/08)

Removing of unsv/broken plywood from bed and providing new plywood of commercial type 12mm thick 7 ply (MR Grade not less than Rs 100 per sqft) and conforming to IS 303 of 1975 to bed hard steel and all as specified and shown on drg. Also brackets of specified shape & size to be provided at all four corners of the bed.

Cot DT Steel with plywood top (GE (K) FD-41/86)

Removing of old unserviceable plywood from cot DT steel with plywood top and supply and fixing plywood of 12mm thick, 7 ply, commercial type, (MR Grade not less than Rs 100 per sqft) and MS angle of size 25x25x5mm shall be fixed & welded as a middle span which should match with top to fix plywood without leaving gap and MS plate iron cleats 10 Nos of size 25x5x60mm made to shape and fixed to both type of rails (02 Nos each rails) by welding as directed. Note:- Angle (Middle spn) and flat (Cleats) iron should have proper holes to fix plywood on top with (30x5mm) size nuts and bolts with washer and all steel section shall be painted with two coats of synthetic enamel paint smoke Grey over a coat of steel primer.

Table office officer steel FD-84(M)/10)

Replacement of unsv top of Table office officers steel and providing new top made out of 18 mm thick pre laminated MDF board and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

S&F new drawer made of 20 gauge MS sheet duly finished with standard workmanship for table office officers steel including preparation of surface & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified, directed and shown on drgs.

S&F MS lock (6 brass levers) with duplicte keys for drawers/shutters complete all as specified, directed and shown on drgs.

S&F legs made out of 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified, directed and shown on drgs.

M&L for spot welding of broken joints 25mm to 75mm after preparation of surface & applying two coats of synthetic enamel paint shade as approved over a coat of red oxide primer to match with existing shade etc complete all as specified, directed and shown on drgs.

S&F hard rubber/PVC toes of superior quality as approved & as directed by Engr-in-charge.

Removal of existing worn out painting from inside & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint shade as approved over a coat of red oxide primer, complete all as specified, directed and shown on drgs.

Table office clerk steel FD-84(M), FD-10)

Replacement of unsv top of Table office clerk steel and providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-1985 and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

S&F new drawer made of 20 gauge MS sheet duly finished with standard workmanship for table office clerk steel including preparation of surface & applying two coats of synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete all as specified, directed and shown on drgs.

S&F MS Lock (6 brass levers) with duplicate keys for drawers/shutters, as per approved sample & as directed by Engr-in-charge.

S&F in repair to leg made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint over two coats of red oxide primer complete all as specified, directed and shown on drgs.

M&L for spot welding of broken joints 25mm to 75mm after preparation of surface & applying two coats of shade as approved synthetic enamel paint over a coat of red oxide primer to match with existing shade etc as shown on drgs complete all as specified.

S&F to hard rubber/PVC toe of superior quality as approved & as directed by Engr-in-charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint shade as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Table with/without Drawer Steel (FD-1007/1008)

Replacement of unsv top of Table with/without drawer steel and providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-1985 and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

S&F new drawer made of 20 gauge MS sheet duly finished with standard workmanship including preparation of surface & applying two coats of synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete all as specified, directed and shown on drgs.

S&F MS Lock (6 brass levers) with duplicate keys for drawer, as per approved sample & as directed by Engr-in-charge.

S&F in repair to leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint over two coats of red oxide primer complete, rest all as shown on drg and as directed.

M & L for spot welding of broken joints 25mm to 75mm after preparation of surface & applying two coats of Smoke Grey synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F to Hard Rubber/PVC toe of superior quality as approved & as directed by Engr-in-charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint shade as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Table Dining OR's (FD 165 (M))

S&F top of the table dining OR's made out of 19mm thick pre-laminated MDF board with 22 gauge aluminium sheet of top,complete all as specified, directed and shown on drgs.

S&F in repairs leg made out of 18 guage MS Sheet complete including preparation of surface & applying two coats of smoke Grey synthetic enamel paint over a coat of red oxide primer to match with existing shade etc as shown on drgs complete all as specified.

M&L for spot welding of broken joints 25mm to 75mm of Table Dining OR's including preparation of surface and applying two coat of Smoke Grey synthetic enamel paint over a coat of red oxide primer complete all as specified, directed and shown on drgs.

S&F Hard rubber toes of superior quality as specified and as directed by Engr-in-charge.

M&L for removal of existing worn out painting from inside & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint Smoke Grey over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Trestle Store Room Iron/Steel (FD-86/1054)

M&L for spot welding of broken joints 25mm to 75mm including preparation of surface and applying two coat of Smoke Grey synthetic enamel paint over a coat of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint shade as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Stool Steel (FD-81 (M), FD-409)

M&L for replacement of top of stool steel complete all as specified, directed and shown on drgs.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint shade as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

M&L for replacement of leg of stool steel complete all as specified, directed and shown on drgs.

S&F Hard rubber toes of superior quality as specified and as directed by Engr-in-charge.

Chair Tubular Steel with Arms (FD-75 (M))

M&L for repairing chair tubular steel with arms by removing existing paint by scrapping down and carrying out repairs such as removing dents. Necessary welding wherever required, providing new hard rubber shoes and applying two coats of smoke grey synthetic enamel paint over a coat of primer after preparation of steel surfaces and flat iron strips 20mm x 3mm, two in numbers on each seat and back, shall be welded to frame of chair complete all as specified, directed and shown on drgs.

M&L for repair/ replacement of seat frame made out of 1st class hardwood teakwood of size (35x25)mm duly black painted and caned (Godrej pattern) for chair tubular steel with arms as overall size of seat frame (450x450)mm, complete all as specified, directed and shown on drgs.

M&L for repairs/ replacement of back rest frame made out of 1st class hardwood teakwood 35x25mm size duly black painted and caned (Godrej pattern) for chair tubular steel with arms as overall size of seat frame (450x380)mm complete all as specified, directed and shown on drgs.

M&L for replacement of hand rest (Godrej pattern) duly painted with black enamel paint as per existing size for chair tubular steel with arms complete all as specified, directed and shown on drgs.

Chair Tubular Steel without Arms (FD-75 (M))

M&L for repairing chair tubular steel with arms by removing existing paint by scrapping down and carrying out repairs such as removing dents. Necessary welding wherever required, providing new hard rubber shoes and applying two coats of smoke grey synthetic enamel paint over a coat of primer after preparation of steel surfaces and flat iron strips 20mm x 3mm, two in numbers on each seat and back, shall be welded to frame of chair complete all as specified, directed and shown on drgs.

M&L for repair/ replacement of seat frame made out of 1st class hardwood teakwood of size (35x25)mm duly black painted and caned (Godrej pattern) for chair tubular steel with arms as overall size of seat frame (450x450)mm, complete all as specified, directed and shown on drgs.

M&L for repairs/ replacement of back rest frame made out of 1st class hardwood teakwood 35x25mm size duly black painted and caned (Godrej pattern) for chair tubular steel with arms as overall size of seat frame (450x380)mm complete all as specified, directed and shown on drgs.

Chair Verandah (Chair Verandah)

M&L for removal of unserviceable cane from Chair Verandah, scraping existing paint from frame with sand paper and M & L for painting with two coats of synthetic enamel paint with white shade and M & L for recanning with white or cream ivory plastic cane 4mm wide, including replacing of hard rubber toes etc complete all as specified, directed and shown on drgs.

Chair Revolving (Model-PCH) (PCH- 7001, 7002, 7003D, 7004D, 7031, 7032, 7033, 7041, 7042R, 7042R)

Removing of unsv seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg.

Removing of unsv back and supply/fixing new back made out of 12mm thick plywood both sides commercial type upholstered with foam of 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The back to be fitted with nuts and bolts (Screws) of required size as per drg.

Material and labour for gas welding of chair revolving wherever required.

Removal of unsv PVC wheel supply and fixing new PVC wheel best quality and approved by GE.

Removal of unsv arms S&F new arms PVC best quality and approved by GE.

Chair Revolving High Back (TP)

Removing of unsv seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg.

Removing of unsv back and supply/fixing new back made out of 12mm thick plywood both sides commercial type upholstered with foam of 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The back to be fitted with nuts and bolts (Screws) of required size as per drg.

Material and labour for gas welding of chair revolving wherever required.

Removal of unsv PVC wheel supply and fixing new PVC wheel best quality and approved by GE.

Removal of unsv arms S&F new arms PVC best quality and approved by GE.

Chair Visitor (TP)

Removing of unsv seat and supply/fixing new seats made out of 12mm thick plywood both sides commercial uphostered with foam of 32 density x 50mm thick covered with tapestry cloth as approvedby GE. Tapestery cloth prices not less than 350 per Rm apply as per best trade practice to be fitted with MS screws with nuts and bolts (Screws) of required size of seats as per drg.

Removing of unsv back and supply/fixing new back made out of 12mm thick plywood both sides commercial type upholstered with foam of 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The back to be fitted with nuts and bolts (Screws) of required size as per drg.

Material and labour for gas welding of chair revolving wherever required

Removal of unsv arms S&F new arms PVC best quality and approved by GE.

Shoe Rack Steel (FD/E6/MAP/02)

M&L for removal of existing worn out painting from including preparation of surface frame complete and applying two coats of 1st quality synthetic enamel paint of black shade over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

M & L for gas welding of shoe rack steel wherever required.

M & L for spray painting with one coat syn enamel paint after applying sand papering of steel surfaces on fwg items :

Rack Adj. 3 Tier Slotted Angle 7200 x 900 x 300 mm (TP)

Rack Open Steel on Sloted Angle (TP)

Rack Side Steel 660 x 300 x 680 mm (TP)

Rack Side Steel 4 Space (FD-97)

Rack Side Steel W/ 3 Shelves Seprate Computer Tray (FD-97)

Rack side steel with tray (685 x 255 x 760mm) (FD-97)

Rack Steel 2500 x 900 x 650 mm (GE (K) FD-94/92)

Rack steel 1830 x 760 x 1905 mm (FD-129)

Rack Steel 1830 x 915 x 450 mm (SK-513)

Rack steel Adj 710 x 900 x 375 mm (TP)

Rack Steel Adj Shelving Angle Post Open Type 2209 x 914 x 457mm (TP)

Rack Steel Adj. 1875 x 900 x 300 mm (TP)

Rack Steel Adj. 6 Tier (FD-106)

Rack Steel Adj. Angle Post Colsed Type (FD-106) (M)

Rack Steel Adj. W/6 Shelves (FD-106/1038)

Rack Steel Adjustable w/8 Shelves (TP)

Rack Steel Adjustable (2475 x 900 x 500mm ) (TP)

Rack Steel For Document 1905 x 915 x 400 mm (FD-106)

Rack steel Open 915 x 710 x 305 mm (FD-97)

Rack steel Storage With 4 Shelves Making 3 Compartment (DGS&D)

Rack Steel With Slotted Angle but 5 Slots (TP)

Rack Steel With Slotted Angle Open (TP)

Receptacle with bucket (FD-43/1044/1045)

REETA ENTERPRISES

M/s J K CONSTRUCTION

L.BHIMSEN

Unitech Enterprises

M/s S.D Construction Co