Construction of Teacher Quarter at Govt. Nadim Memorial Higher Secondary School Kaloosa, Zone Quilmuqam District Bandipora

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by EIC, All kinds of soil

Providing and laying of hand packed boulders in foundation trenches including ramming watering etc including all carriage of material involved & head load complete job

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc.Layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering leadup to 50m and lift upto 1.5m.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement of R.C.C work incl. straightening, cutting, bending, placing in position and binding at all levels complete including all cost and carriages of material involved & head load.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.

Centering and shuttering including strutting, propping etc. and removal of form for: i) Foundations, footings, bases of columns etc

ii) Lintel , beams , plinth beams , girders , bressumers and cantilevers.

iii) Suspended floors, roofs, landings, balconies and access platforms.

iv) Staircase

Providing and fixing of wood work in frames of doors, windows clestory windows wrought frame of first class imported Wood including all carriage of material involved & head load complete job.

Providing and fixing of 40x5 mm flat iron hold fast including fixing of frames with nuts and bolts including all carriage of material involved & head load complete job

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete. 50 mm thick with 20mm nominal size stone aggregate.

Providing and applying of 12mm Cement plaster of mix 1:6 ( 1 cement:6 fine sand ) including all carriage of material involved & head load complete job

Providing & fixing paneled or paneled & glazed shutters for doors & windows and clerestory windows including ISI marked black enameled M.S Butt hinges with necessary screws excluding paneling imported wood Including cost & carriage and head loads of all materials involved complete

P/F of glass panes 3.50 mm thick incl beading nails etc including cost of carriage and head loads complete

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture including cost of carriage and head loads.

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades. including cost of carriage and head load.

Providing and applying 2 mm thick white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including all carriages of material involved & head load.

Structural steel work (welded) in built up sections and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including all carriages of material involved & head load.

Providing/Fixing colour coated high Rib GS sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead and including Ridges and valleys all complete job (upto a pitch of 60 degrees), excluding the cost of purlins, rafters and trusses.0.50mm thick . all carriages of material involved & head load.

Finishing walls with water proof cement paint of approved brand and manufacture of required shade to give an even shade. two or more coats o all carriages of material involved & head load.

P/F of following hardware fittings of ISI Marked complete job including all cost and carriages of material involved & head load. A) Handle 4"

B) Tower bolt 6"

C) Tower bolt 4"

D) Handle 6"

E) L Drops 9"

F) Lock

G) Air Hooks

Providing & fixing paneling for shutters of doors of decorative prelaminated partical board with decorative laminations on both sides. Including cost of carrriage and head loads . Etc complete job .

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete Including cost of carrriage and head loads . Etc complete job .

Providing and fixing soil waste, vent pipes 100mm including tees, bends, collar including trenching and refilling all complete.

Providing and fixing soil waste, vent pipes 75mm including tees, bends, collar including trenching and refilling all complete.

Providing and fixing 03 layer P.P.R pipes SDR 7.4 UV stablized an anitmicrobial fusion welded having thermal stability for hot and cold water with PPR fittings and clamps, including cutting and making good the walls ete of 15mm, 20MM to 32mm medium.including trenching and refilling all complete.

Construction of brick masonary manhole of size 300x300 mm including C.I (heavy duty) cover and frame, plastering and concrete base all complete.

P/F of following C.P fittings as approved by Engineer in charge including all complete. A) Soap case of approved quality

B) Mirror 450x600mm of approved quality

C) 100 mm steel gratings in nahani or gully trap

D) Towel rod of good quality

E) C.P PIPES of approved quality

F) Gate value of approved quality

G) Angle valve 15mm nominal bore (Jaquar)

H) Single Lever Basin / sink Mixer (Jaquar)

I) PVC Waste pipe 32 mm dia (Jaquar)

J) Bib cock 15mm nominal bore long body (Jaquar)

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Etc Complete Job

Providing and placing on terrace polythene water storage tanks ISI 12701 marked indicating the BIS license no with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including necessary fittings. Etc Complete Job

P/F of 50 litre water heater geyser of approved make like venus, jaquar, Racold or equivalent make including all necessary fittings complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink without drain board 610x510mm bowl depth 200mm

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing /fixing 25 mm dia PVC conduit pipes for electric fittings including necessary junctions,fan boxes,bends complete.

Dry Stone work for sokage pit Including cost of carrriage and head loads. Etc complete.

Wiring for light point/ fan point/ exhaust fan point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, angle holder,blub suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Carriage of material by mechnical Transport including loading, unloading for:- i. Sand average lead 8 km

ii. Bajri average lead 26 km

iii. Bricks average lead 80 km