SPECIAL REPAIRS TO WTP (WATER TREATMENT PLANT) FILTRATION BED AND ALLIED WORKS AT ATS BELAGAVI UNDER GE (AF) SAMBRA

Amount

M&L for removal of old filter media from filter bed and stacking out site the building and straning the media complete all as specified and directed

M&L for laying fresh supporting quartzs gravels size varing from 38 to 65 mm in filter beds complete all as specified and directed

M&L for laying fresh supporting quartzs gravels size varing from 20 to 38 mm in filter beds complete all as specified and directed

M&L for laying fresh supporting quartzs gravels size varing from 12 to 20 mm in filter beds complete all as specified and directed

M&L for laying fresh supporting quartzs gravels size varing from 05 to 12 mm in filter beds complete all as specified and directed

M&L for laying fresh filter media quartzs coarse sand layers in filter beds complete all as specified and directed

M&L for laying fresh filter media quartzs fine sand layers in filter beds complete all as specified and directed

M&L for cutting openings, through brick walls for enlarging existing openings, cutting out.defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed

M&L for forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in cement mortar 1:4

M&L for ductile iron fittings such as bends ISI Marked (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc) tee pieces single branch ‘Y’ junction, double branch, cross (all socket or socket and spigot or flanged and socket etc) color, caps and plugs suitable for DI/CI pipe upto 150 mm dia including removing old existing CI fittins complete all as specified and as directed.

M&L for ductile iron fittings such as bends ISI Marked (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc) tee pieces single branch ‘Y’ junction, double branch, cross (all socket or socket and spigot or flanged and socket etc) color, caps and plugs suitable for DI/CI pipe 200 mm dia and above including removing old existing CI fittins complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm, 4 core fixed on walls by means of suitable size clamps spaced at 1 metre complete all as specified and directed.

Excavation in trenches not exceeding 1.5m depth and not exc 1.5m wide and getting out in hard / dense soil for laying cable/erecting poles complete all as specified and directed

Returning and filling in soil including spreading levelling watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply, fixing,testing and commissioning Chain Pulley Block 1Ton Single fall CPB with chain 8mm thick including fixing arrangements complete all as specified and directed.

M&L for angle, channels or tee sections, fixed independently, without connection plate, etc for (Fe 410 grade ) including necessary drilled holes, welded together complete all as specified and directed

M&L for 3 core flat multistranded copper submersible cable 10 sqmm sizevfor submersible pump set including necessary connection and testing complete all as specified and as directed.

M&L for 3 core flat multistranded copper submersible cable 6 sqmm size for submersible pump set including necessary connection and testing complete all as specified and as directed.

S&F in replacement non return butterfly valves of size 150mm dia complete all as specified and as directed.

S&F in replacement non return butterfly valves of size 100mm dia complete all as specified and as directed.

S&F in replacement non return butterfly valves of size 80mm dia complete all as specified and as directed.

M&L for cutting the existing 150mm bore pipe DI/CI/GI for inserting the Tee/branch connection complete all as specified and directed

M&L for cutting the existing 200mm bore pipe DI/CI/GI for inserting the Tee/branch connection complete all as specified and directed

Supply and laying 200 mm nominal dia ductile iron pipe , spigot and socket including rubber joints class K-9 complete all as specified and as directed. Note :- Specials and fittings will be measured and paid separately.

Supply and laying 100 mm nominal dia ductile iron pipe , spigot and socket including rubber joints class K-9 complete all as specified and as directed. Note :- Specials and fittings will be measured and paid separately.

Supply and laying 80 mm nominal dia ductile iron pipe , spigot and socket including rubber joints class K-9 complete all as specified and as directed. Note :- Specials and fittings will be measured and paid separately.

S&F in replacement sluice valve, flanged of class 1.6 PN of size 300 mm (12”) dia complete all as specified and directed

S&F in replacement sluice valve, flanged of class 1.6 PN of size 250 mm (10”) dia complete all as specified and directed

S&F in replacement sluice valve, flanged of class 1.6 PN of size 200 mm (10”) dia complete all as specified and directed

S&F in replacement sluice valve, flanged of class 1.6 PN of size 150 mm (10”) dia complete all as specified and directed

S&F in replacement sluice valve, flanged of class 1.6 PN of size 100 mm (10”) dia complete all as specified and directed

S&F in replacement foot valve valves of size 150mm dia complete all as specified and as directed.

S&F in replacement foot valve valves of size 100mm dia complete all as specified and as directed.

S&F in replacement footalve valves of size 80mm dia complete all as specified and as directed.

S&F MS pipe 150 mm bore including MS Flange (heavy duty) including rubber gasket packing suitable nuts, bolts, washers all fittings like brackets of any angle, short pieces, welding the flanges to MS pipe complete, applying two coats with black paint over one coat of red oxide primer externally on the pipe line complete including testing and commissioning to the satisfaction of Engr-in-Charge complete all as specified and directed

S&F MS pipe 100 mm bore including MS Flange (heavy duty) including rubber gasket packing suitable nuts, bolts, washers all fittings like brackets of any angle, short pieces, welding the flanges to MS pipe complete, applying two coats with black paint over one coat of red oxide primer externally on the pipe line complete including testing and commissioning to the satisfaction of Engr-in-Charge complete all as specified and directed

S&F MS pipe 80 mm bore including MS Flange (heavy duty) including rubber gasket packing suitable nuts, bolts, washers all fittings like brackets of any angle, short pices, welding the flanges to MS pipe complete, applying two coats with black paint over one coat of red oxide primer externally on the pipe line complete including testing and commissioning to the satisfaction of Engr-in-Charge complete all as specified and directed

Supply, installation and testing of Heavy duty Chemical Dosing system plunger type suitable to inject solution upto 25 LPH working pressure 10 kg /cm2 comprising dosing pump coupled with three phase electric motor of capacity 0.5 HP,1440 RPM assembly with agitator in one motor , agitator with SS sweep blade duly FRP coated, FRP tank 150 ltrs capacity, complete unit mounted on heavy duty MS fabricated frame duly anticorrosive paint complete with Chemical grade PVC NRV. along with Control panel for Dosing Pump suitable for Model SSAPS/CDSPT/25 made of powder coated MS fabricated box consisting of LED indicator, digital Volt meter, Amp meter, single phase preventor, High voltage low voltage protection complete all as specified and directed. Make:- Sathya Sai®/Sathya sai Aqua Pura Services/Fuild Control system PVT LTD/Matrix International Model No:- SSAPS/CDSPT/25

S&F in repairs water tubing, Unplasticised PVC pipes, of pressure rating 10 kgf/cm2 laid on floors of 15 mm bore complete all as specified and directed

S&F in repairs Gun metal globe gate valve with iron wheel based screwed both ends for iron pipe of 15 mm dia complete all as specified and directed

S&F in repairs DOL (Direct on Line) Motor Starter for 2 HP Motor set including Contactor, over load relay, & connected wiring etc complete all as specified and as directed.

Supply, installing, testing and commissioning of LT feeder pillar box AC 415 V , 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure / cubicle , fully compartmentalized type , suitable for outdoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick CRCA steel sheet with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1 , foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter , changeover switch and MCCBs , hinged doors at front with suitable locking arrangement , Provision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated , complete all as specified and directed:-

BUSBAR Aluminium bus bar 200 Amps , supported on non hygroscopic fibres and brass screws for mounting -4 Nos

INCOMER MCCB of 4 pole of capacity 125 amps with breaking capacity of 25 KA fixed thermal and fixed magnetic setting - 01 No.

Demolition of brickwork/ stone / boulder masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Dismantalling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for pre-cast cement concrete block 1:3:6, type C1 (using 20mm nominal size, crushed and graded stone aggregate) masonry with solid blocks and setting in cement mortar (1:4) having minimum compressive strength of 50 Kg per Sqcm complete all as specified and directed

M&L for plain cement concrete, 75mm thick, 1:4:8, type D-1 (using 20mm nominal size crushed and graded stone aggregates) for sub-base of floors or of similar type of work finished fair and even complete all as specified and directed

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 over walls surfaces of any description and surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for 20mm to 25mm thick machine cut Kota stone work in steps(treads), window/door-cills, flooring and like bedded and jointed with grey cement slurry with 20mm thick cement mortar (1:4) including pointing in white cement with pigment to match with shade of Kota stone including rubbing and polishing (mirror finish) complete and cutting for circular holes of any dia for fixing sanitary fittings or of simialr work complete all as specified and directed.

M&L for hard core of gauge not exc 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to atrue surface using broken stone or boulders complete all as specified and directed.

M&L for 20mm to 25mm thick machine cut Kota stone work in steps (risers), window/door-jambs, vertical portions, dado and like bedded and jointed with grey cement slurry with 15mm thick cement mortar screed bed (1:4) including pointing in white cement with pigment to match with shade of Kota stone including rubbing and polishing (mirror finish) complete and cutting for circular holes of any dia for fixing sanitary fittings or of simialr work complete all as specified and directed.

M&L for preparaion of new steel surfaces of any description, over 10cm in width or girth, not otherwise described any applying two coats of synthetic enamel paint over a coat of red oxide Zinc chromate primer complete all as specified and directed

Manak landmarks (BID ID -3089747)

M/s S N Atiwadkar (BID ID -3094766)

DHAIRYASIL RAMAKANT DESAI (BID ID -3095447)