96/NPCH/2026-27 (6)

Surface Dreesing of Ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift upto 1.5m all kind of soil

Earth work in Exavation in Foundation in ordinary soil exavation to be in the form of ragular pits not exceeding .50m in depth and earth work in embenkment to be in 20 cm. layers in cluding, remming and Dressing the surface to required levels and slopes and also including 1.50m lift distance as directed by Engineer incharge(But water and liquid mud / in under foul condition) as per s.i. no. 251+251(a)

E/W in cutting or in embenkment in ordinary soil exavation to be in the form of regular pits not exceeding .50m in depth and E/w in embenkment to be in 20 cm layers including remming and dressing the surface to required levels and slops i/c all lead 8 km, cartage

Concrete with 4 cm guage stone balast , coarse sand and cement in proportation of 8:4:1 including supply of all material, labour T& P etc as per S.I. NO. 281

R. C. C. (1:1.5:3 ) with cement,C/ sand & 20--40mm. S/grit including attached pilasters,buttresses,plinth and string courses,fillets collumns,pillers, etc. upto floor five level excluding cost of centring,shuttring i/c all at site.as per s.i.no 289

M.S. or tor steel in plain such as RCC work i/c its cutting, bending & binding complete as SI.504

M-150 Brick work in 1:4 with cement and coarse sand mortar in including supply of all Material,labour,tools& plants etc. required proper completion of the work as per s.i. no. 305(a)+309+310

12mm thick plaster with 1:3 cement and app. Coarse sand brick work including supply of all material,labour,tools and plants etc required for proper comp. of work as per s.i. no. 582(a)

Providing and fixing 1mm M.S. sheet garrage door with frame of 40x40x6mm angle iron 3.15(1/8") thick M.S. gusset plate at the juction and corners including supply and fixing necessary fitting. Lock rail of 15" length of oxidized iron and i/c hooks at the top and applying priming coat of red led paint on all sides comp. (a) using angles 40x40x6mm for diagonal bracings as per s.i. no. 517(a)

M.S. iron work in heavy size such as trusses,builtup gates,record racks,roof work, gates etc . and thair fixing required for proper completion of work as per s.i. no. 503