REPAIR/ MAINT AND REPLACEMENT OF STREET/ SECURITY LIGHTS, WATCH TOWERS LIGHTS, HIGH MAST LIGHTS, FENCING LIGHTS IN DOMESTIC, TECH AREA AND RAKSHANAGAR AT 11 BRD AF STN OJHAR

Amount

Disconnecting /isolating electric supply from the source at HT/LT electrical pole/wall/tower height up to 15 mtr from ground and taking down carefully for repair the existing unserviceable street light/security light/flood light or any type of cable fault and repair by checking and making the fittings serviceable by replacing the unserviceable parts or fitting as required at site, under relevant items as supply only ( item for Ser no 2 to 9 & 13 to 17 ) rates subsequently- followed as mentioned here in under, by the contractor for replacement to suit the existing parts and fittings (fixing charges for replacement shall be deemed included in the quoted rates against serial item No. 1) complete re-fixing at existing locations or as directed by Engineer in charge, connecting with source and testing for proper functioning / serviceability of the fittings complete as directed. Note:- Complaints/Defects will be rectified within 8 Hrs of intimated time. If complaints not rectified, a recovery of an amount of Rs 250 per complains per day will be recovered from the RAR/FB. Complaints detailed on media like whatsapp /text message/ complaints slip shall be treated as valid complaints.

Supply only LED street light fittings 100 watt with minimum110 lumen/ watt system lumen output.The luminaire should have cool white coloure temperature with minimum 5700 K. The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection lumen efficiency of 120 lumen /W, isolated electronic LED driver ( SMPS based constant current supply), IK-07, life class of 50,000 hrs @ L 70, surge voltage protection not less than 10 KV for not less than 100 cycles. Make Crompton CAT No CRP-409-100-57-SL-GL-NSG or equivalent in Havells/ Phillips.complete all as specified and directed by Engineer- in-charge.

Supply only LED street light fittings 70 watt with minimum110 lumen/ watt system lumen output .The luminaire should have cool white coloure temperature with minimum 5700 K. The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection, lumen efficiency of 120 lumen /W, isolated electronic LED driver ( SMPS based constant current supply), IK-07, life class of 50,000 hrs @ L 70, surge voltage protection not less than 10 KV for not less than 100 cycles. Make Crompton CAT No CRP-409-70-57-SL-GL-NSG or equivalent in Havells/ Phillips.complete all as specified and directed by Engineer- in-charge..

Supply only LED street light fittings 60 watt with minimum110 lumen/ watt system lumen output .The luminaire should have cool white coloure temperature with minimum 5700 K. The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection, lumen efficiency of 120 lumen /W, isolated electronic LED driver ( SMPS based constant current supply), IK-07, life class of 50,000 hrs @ L 70, surge voltage protection not less than 10 KV for not less than 100 cycles. Make Crompton CAT No CRP-409-60-57-SL-GL-NSG or equivalent in Havells/ Phillips.complete all as specified and directed by Engineer- in-charge..

Supply only LED street light fittings 45 watt with minimum110 lumen/ watt system lumen output .The luminaire should have cool white coloure temperature with minimum 5700 K. The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection, lumen efficiency of 120 lumen /W, isolated electronic LED driver ( SMPS based constant current supply), IK-07, life class of 50,000 hrs @ L 70, surge voltage protection not less than 10 KV for not less than 100 cycles. Make Crompton CAT No CRP-409-45-57-SL-GL-NSG or equivalent in Havells/ Phillips. Complete all as specified and directed by Engineer- in-charge.

Supply only LED Flood light fittings 150 watt with 110 lm/ watt system lumen output . The luminaire should have cool white coloure temperature with minimum 5700K . The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection, lumen efficiency of 120 lumen /W, isolated electronic LED driver ( SMPS based constant current supply), IK-07, life class of 50,000 hrs @ L 70, surge voltage protection not less than 10 KV for not less than 100 cycles. Make Crompton CAT No LFLN-150-CDL/60-M-HPM or equivalent in Havells/ Philips.complete all as specified and directed by Engineer- in-charge.

Supply only LED Flood light fittings 120 watt with 110 lm/ watt system lumen output . The luminaire should have cool white coloure temperature with minimum 5700K . The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection, lumen efficiency of 120 lumen /W, isolated electronic LED driver ( SMPS based constant current supply), IK-07, life class of 50,000 hrs @ L 70, surge voltage protection not less than 10 KV for not less than 100 cycles. Make Crompton CAT No CFS-504-120-57-60D-SL-GL-NSG or equivalent in Havells/ Philips.complete all as specified and directed by Engineer- in-charge.

Supply only LED Flood light fittings 100 watt with 110 lm/ watt system lumen output . The luminaire should have cool white coloure temperature with minimum 5700K . The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection, lumen efficiency of 120 lumen /W, isolated electronic LED driver ( SMPS based constant current supply), IK-07, life class of 50,000 hrs @ L 70, surge voltage protection not less than 10 KV for not less than 100 cycles. Make Crompton CAT No TFS-504-100-57-60D-SL-GL-NSG or equivalent in Havells/ Philips.complete all as specified and directed by Engineer- in-charge.

Supply only LED Flood light fittings 80 watt with 110 lm/ watt system lumen output . The luminaire should have cool white coloure temperature with minimum 5700K . The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection, lumen efficiency of 120 lumen /W, isolated electronic LED driver ( SMPS based constant current supply), IK-07, life class of 50,000 hrs @ L 70, surge voltage protection not less than 10 KV for not less than 100 cycles. Make Crompton CAT No LFL-80- CDL/60-M or equivalent in Havells/ Philips.complete all as specified and directed by Engineer- in-charge.

Supply & Fix in repair PVC perplex cover glove type with Base plate /holder not less than 8 inch dia suitable for Post top lantern including one nos 7/9 watt LED lamp complete all as specified and directed by Engineer- in-charge.Make - Bajaj / Surya/*havells.

Repairs to High mast light 15/30 Mtr high, by taking down the luminaires mounting frame mechanically and replacing the unserviceable items (paid separately) including lifting the superstructure after repairs and testing complete all as specified and as directed by Engr-in- Charge..

Taking down old /unserviceable solar street light fiting from LT pole Opening the fittings and checking all connection and repair the same by replacement of follwing part for proper functiong (a). AIO Charge controller for 18 W (b). AIO PIR sensor for 18 W, (c). AIO Li-Ion Battery for 18 W. As per existing make installed at site complete all as specified and as directed by engr-in -charge.

Taking down old /unserviceable street light fiting from LT pole Opening the fittings and checking all connection and repair the same by replacement of LED driver of 120 watt complete all as specified and as directed by engr-in -charge.

Takingdown old /unserviceable street light fiting from LT pole Opening the fittings and checking all connection and repair the same by replacement of LED driver of 70 watt complete all as specified and as directed by engr-in -charge.

Taking down old /unserviceable street light fiting from LT pole Opening the fittings and checking all connection and repair the same by replacement of LED driver of 45/30 watt complete all as specified and as directed by engr-in -charge.

Supply & Fix in repair LED Post top lantern weather proof indirect lighting solution Make Cormpton Cat Pt No LPTC-40-CDL or equivalent in Havells/Bajaj.complete all as specified and directed by Engineer- in-charge.

Supply & Fix in repair Post top lantern decorative HERITAGE LED suitable 1X20 Watt retro LED with opel deffuser including LED 20 Watt of Make Crompton Cat Part No LPTH-20-CDL or equivalent in Havells/ Wipro.complete all as specified and directed by Engineer- in-charge.

S&F in repair flat twin core 10 sqmm nominal cross sectional area multistand aluminium conductor cable over all PVC shathed 1100 volt grade Heavy duty cable complete all as specified

S&F in repair flat twin core 6 sqmm nominal cross sectional area multistand aluminium conductor cable over all PVC shathed 1100 volt grade Heavy duty cable complete all as specified

Supply and fix in repair street light bracket 32/40 mm bore GI pipe/tubing light grade not less than 1.2 Mtr long band to shape with 2 nos MS clamps flat iron 50 x 5 mm for nuts, bolts and washers suitable for Steel/PCC Pole etc and applying two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed. Make- Prakesh surya/Swastik/Jindal

Material and labour for cable joint termination box PVC body housing suitable for housing and including 100 amps rated, 3 phase, 4 wire system mounted on PVC insulators for one incomming and two out going cable entry space mounted on street light PCC/ tublar pole with 25x3 mm FI clamps with nut, bolts and washers and including one 6 amps MCB, SP, 240 volt for street light supply complete all as as directed by Engr-in-charge. Make: Sintex /Hansel

Supply and fix in repair MCB SP 6 to 32 Amps 240 volts 10 KA C series. Make : Standard/ HPL/L & T.

Supply and fix in repair MCB SPN 32 Amps 240 volts 10 KA. Make : Standard/ HPL/ L & T.

Supply and fix in repair MCB SPN 63 Amps 240 volts 10 KA. Make : Standard/ HPL/ L & T.

Supply and fix in repair Isolator TPN 63 Amps 415 volts 10 KA. Make : Standard/ HPL/ L & T.

Supply and fix in repair Sheet metal enclosure for DB’s with out bus bar for 2 way 240 volts. Make : Standard/ HPL/L & T Legrand.

Supply and fix in repairs power contactor, ML-3type Three pole, 440 volt , Auxilary coil voltage 230 Volt, Make- L&T/Legrand/Semiens

Supply and fix in repairs Time digital switch with built in PCB for street light , Make L&T, type DIGICON or equivalent of GEC/ GIC/ Havells.

S&F PVC insulated and weather proof three core copper multi stranded conductor cable 1.5 Sqmm size as required length for replacing unserviceable cable for street light where ever found unserviceable and required from junction box to street light connector of Street Light fittings all as specified & as directed by Engr-in-Charge.

Supply and fixing Straight through joints( heat shirnk) for LT underground cable including joint kits and labour complete for making joints suitable for aluminium conductor cables 4 core 16 Sqmm. Make: Raychem /Denson /G- seal

Dismantling of LT RCC/steel pole from roots and removing the dismantling mtrl to more than 100 mtr distance as reqd at site complete all as specified and directed by Engr -in-charge.

Shifting of LT Pole any type from one place to another places entire location of 11 BRD including all connection/disconnection of electric supply including all earth works as reqd at site complete all as specified and directed by Engr -in-charge.

Tree cutting around the street light fittings any type complete 3 mtr radious of street light fitting complete and removint the mtrl to not exceeding 100 mtr from the site. all as specified and as directed by engineer in charge.

Supply and laying in trenches/ducts or passing through pipe 1100 volt grade LTUG cable with XLPE insulated armored heavy duty electric cable ISI marked with aluminium conductor 1100V grade 4 core cross sectional area 10 sqmm all as specified and directed.

Supply and laying in trenches/ducts or passing through pipe 1100 volt grade LTUG cable with XLPE insulated armored heavy duty electric cable with aluminium conductor 1100V grade 2 core cross sectional area 10 sqmm all as specified and directed.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 meter in depth and getting out in soft/loose soil all as directed.

Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm all as directed.

Removing of surplus soil not exceeding 50 meter and depositing where directed at a level not exc 1.50 mtr above the starting point all as directed.

Supply and laying Double walled corruyated (DWC) Duct (Dura- Guard) as per IS-14930 Part - II for LT UG cable protection including coupler, elbows, T- Joint, Bends, etc and test report Make :- Dura- line/Gemini/Rex. Of size 38mm

Supply and fix 40mm dia bore galvanized iron tubing, light grade including all fitting for cable protection etc laid in floor or fixed to poles with clamps etc all as specified and directed.Make- Prakesh surya/Swastik/Jindal.

S&F Octagonal GI Pole 7 mtr long with dome, top 70 mm and bottom 130 mm fixing on base plae 200X200X12 mm with suitable size of foundation nut & bolt. including all earth work and RCC foundation as recommeded by OEM complete all as as directed by Engr-in-charge.Make Bajaj, CG,Surya.

S&F Octagonal GI Pole bracket single arm 1.50 mtr long, fixing withsuitable nut bolt and washer as described in OEM manual complete all as as directed by Engr-in-charge.Make Bajaj, CG,Surya.

M&L for checking the serviceability of fencing street light /Hanger security light/ Watch Tower light at Tecnical area and Domestic area. The contractor Rep shall be present at Domestic area sub stn at 6.00 PM every day for ckecking of street light serviceability and trace out the minor fault/defects if any and repair the same at site for proper functioning of the street lights. Note:- (i) Complaints/Defects will be rectified withen 8 Hrs of intimated time. if complaints not rectified, a penality of an amount of Rs 250 per - complains per day will be imposed and will be recovered from RAR/FB (ii) Contractor shall submit daily report in respect of street light serviceability duly signed by user’s rep as token of acknowledgement to JE E/M/Eng-In-Charge. (ii) T&P required for checking to be arrange by the contractor(iii) The rate for above Note works will be deemed to be included in quoted rates by the contractor

M&L for Preparation of old painted surfaces of steel tublar poles LT 9.0 Mtr long & painting two coats of aluminium paint from top to bottom and painting with alternate strip of blue paint at an interval of 1 feet from bottom of pole upto 6 feet height, including existing cross arm/angle iron/clamps/brackets etc & marking of pole numbers in white on black background all as directed.

M&L for Preparation of old painted surfaces o fPCC poles LT 9.0 Mtr long & painting two coats of weather proof distamper paint from top to bottom and painting with alternate strip of blue paint at an interval of 1 feet from bottom of pole upto 6 feet height, including existing cross arm/angle iron/clamps/brackets etc & marking of pole numbers in white on black background all as directed.

Taking out the old burnt LT cable from panel /Pole junction box, trace out the fault and rectified the same by cutting the burnt portion of cable and making suitable joint, connection with suitable size lugs/thimble, insulation tape etc as requited at site complete all as specified and as directed by engr-in charge Note : Excavation earth work will be included in the quoted rate all as directed.

Taking out the old/unsv LT cable from the trench and find out the defects and repair the same before re-laying/re-routing complete all as specified and as directed by engr-in charge Note : Excavation earth work will be included in the quoted rate all as directed.

DIAMOND ENTERPRISES

SONA LAKSHMI ASSOCIATE

K R Electricals

Shree Sai Samarth Enterprises

SHRI SULAI ELECTRICALS

Datar Electrical and Engg Services

M/s.TIRUPATI BUILDERS