Virudhunagar Municipality - Construction of Ration Shop at Ward No.25

Amount

Dismantling the exising the dameged brickworks incliding cost and conveyance of all charges

Earthwork excavating and depositing on bank with initial lead of 10 metres and lift of 2 metres in all kinds of soil except medium rock, dense medium rock and hard rock requiring blasting including refilling the sides of foundation with excavated earth in layers of 15 cm thick, watering and consolidation and depositing the surplus earth with in the compound in places as shown by the departmental officers with initial lead and lift, cleaning, leveling the site etc., complete complying with standard specifications (……..) Column

Earthwork excavating and depositing on bank with initial lead of 10 metres and lift of 2 metres in all kinds of soil except medium rock, dense medium rock and hard rock requiring blasting including refilling the sides of foundation with excavated earth in layers of 15 cm thick, watering and consolidation and depositing the surplus earth with in the compound in places as shown by the departmental officers with initial lead and lift, cleaning, leveling the site etc., complete complying with standard specifications (……..) for beam

Laying Plain cement concrete 1:4:8 ( One cement four sand and eight aggregate ) using 40 mm ISS Hard Broken granite stone jelly for foundation and basement including watering if found necessary and laid in layers of 15 cm thick, and consolidated including curing, cost and conveyance of all metarials to work site, all labour and incidental charges etc., complete complying with standard specifications. (……..)

Collection and supply and filling with well gravel from approved quarry to work site to reqiured depth including well rammed watered and compacted - etc., complete complying with standard specification.

Providing steel centering for sides and soffits including supports and strutting upto 1:10/1:20 up to 3.29m height for plain surfaces such as RCC slabs, rectangular beams, Tee beams, bed blocks, culvert body walls, deck slabs, retaining walls, staircase, Landing slab, landing beams, canopy etc., with all cross bracings using mild steel sheets of size 90 mm X 60 mm X 10 gauge stiffened into welded mild steel angles of size 25 mm X 6 mm for boarding laid over silver oak ( country wood ) joists of size 10 cm X 6.5 cm spaced at 90 cm centre to centre and supported by casurina props of 10 cm to 13 cm dia spaced at 15 cm c/c including cost of nails, ropes, all labour charges and incidental charges etc., complete complying with standard specification. (TNBP Spl No:154 A) For Beam

Providing steel centering for sides and soffits including supports and strutting upto 1:10/1:20 up to 3.29m height for plain surfaces such as RCC slabs, rectangular beams, Tee beams, bed blocks, culvert body walls, deck slabs, retaining walls, staircase, Landing slab, landing beams, canopy etc., with all cross bracings using mild steel sheets of size 90 mm X 60 mm X 10 gauge stiffened into welded mild steel angles of size 25 mm X 6 mm for boarding laid over silver oak ( country wood ) joists of size 10 cm X 6.5 cm spaced at 90 cm centre to centre and supported by casurina props of 10 cm to 13 cm dia spaced at 15 cm c/c including cost of nails, ropes, all labour charges and incidental charges etc., complete complying with standard specification. (TNBP Spl No:154 A) For Column

Supplying, fabricating and placing in position of mild steel (or) Ribbed tor steel rods of required size for reinforcement of all RCC work including cost of steel rods, binding wire and labour charges and incidental charges for cutting & bending rods, tieing into grills, placing in position etc., complete as directed by the departmental officers. (TNBP No:15886)

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

Brick work in cement works 1:5 ( One cement and five sand ) using best quality country brick of size 9” X 4 3/8” X 2 3/4 “ including cost and conveyance of materials to work site, all labour charges and incidental charges, curing etc., complete complying with standard specification.

Weathering Course with Brick Jelly Concrete including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc., complete as per standard specification.

Pressed tiles of 20mm thick of all sizes and shapes including cost and conveyance of materials and labour charges etc., complete as per standard specifications.

Plastering with CM 1:5 mix, 12mm thick and including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc., complete as per standard specification.

Special Celling Plastering with CM 1:3 mix, 10mm thick and including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc., complete as per standard specification.

Supplying and erecting pull and push type rolling shutter with I.S.I. make of approved size and section using 18 gauge G.I.sheet with manually operated type. The Shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc, complete as per standard specification.

Supply and fixing steel door including cost and conveyance of all materials to site and all labour charges etc. complete

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality including cost and conveyance of all materials to site and all labour charges

Painting two coats of newly Steel Doors & Windows with ready mixed Synthatic Enamul paint of first class quality including cost and conveyance of all materials to site and all labour charges

Supply and run off 4 of 6sq mm service wire with reel insulator at equal intravels on GI bearer wire including cost and conveyance etc.. Complete.SD 68

Wiring with 2x1.5Sq m (22/0.3) PVC insulatator SC Unshelther cundouctor of 1100V garde in suitable PVC rigided pipe concealed in wall and cealing with PVC accecaries in flush with wall with 3mm hylum seat covered with teak woad switch box and 5A switch and making good of the concealed portion with suitable colour for PVC concealed pipe line for FAN POINT

Supplying and fixing 1200mm sweep AC cealing fan with condensor and regultor including cost and conveyance of all materials and all accesaries etc.. Complete.

Wiring with 2x1.5Sq m (22/0.3) PVC insulatator SC Unshelther cundouctor of 1100V garde in suitable PVC rigided pipe concealed in wall and cealing with PVC accecaries in flush with wall with 3mm hylum seat covered with teak woad switch box and 5A switch and making good of the concealed portion with suitable colour for PVC concealed pipe line for LIGHT POINT

Supplying and fixing of 4' 40w single box type tube light with copper choke and condensor,with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with tube.

Wiring with 2x4Sq m (22/0.3) PVC insulatator SC Unshelther cundouctor of 1100V garde in suitable PVC rigided pipe concealed in wall and cealing with PVC accecaries in flush with wall with 3mm hylum seat covered with teak woad switch box and 5A switch and making good of the concealed portion with suitable colour for PVC concealed pipe line for PLUG POINT.SD 40

Supply and delivery of16 Amps 500V aerial fuse unit with cost and conveyance etc. complete.

Supply and delivery of16 Amps 500V TPN main switch with cost and conveyance etc. complete.

Supply and delivery of 24" x 18" wooden meter board including cost and conveyance etc. complete.

Supply and run off of 4 of 6 sq mm service wire with GI pipe bend at both ends on walls including cost and conveyance etc. complete SD:73.

Proper earthing as per PWD standard including cost of salt charcoal etc. complete.(SD -

Finishing the top of floor with Granolithic Finish with CC 1: 2: 4 (one cement, two sand & four HBG jelly) using chips of grade 10 mm and below for 12.5mm thickness and rubbed smooth etc, complete as per standard specification

GMARIAPPANANDCO