PROVN OF TOILET CUM BATHROOM BLOCK AT NEAR PUF SH-689 AT UNIT LOCATION OF PLANT COY WKSP EME AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R I UNDER GE PANAGARH

Amount

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for Hardcore of gauge n.exc 63mm, deposited, spread and leveliled in layers n.exc 150mm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC type D2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for Rendering 15 mm thick cement plaster in CM (1:4) on fair faces of brick/concrete surfaces finished and smooth without using extra cement and using water proofing compound admixture as per manufacturer's instruction, complete all as specified and directed. Note :- WPC will measuered and paid separatly under relevant item of schedule.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for preparation of new surfaces of wall priming with alkali resistant primer and applying two coats of cement based paint complete all as specified and directed.

S&F chain link MS hot dipped galvanized coating on round steel wires fencing of mesh size 75 x 75 mm with minimum dia. of wire 3.00 mm, fixed to MS fencing posts and securing with nuts, bolts and fillets etc and tying with MS binding wire etc by weight per sqm not exceeding 4 kg, complete all as specified and directed by Engr-in-Charge. Make : TATA/JINDAL/SHYAM STEEL PVT LTD

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F framed work such as grills, gratings, or in Flat iron etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.complete all as specified and directed.

S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for cement concrete type (C-2) 1:3:6 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete in post holes complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (Design mix) using 20mm graded stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (Design mix) using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finihed surfaces complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed.

M&L for TMT bars 10mm dia, and over cut to length bent to shape required including cranking, bending spirally for hoping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia quality confirming to Fe 410-5 complete all as specified and directed.

All as per item No 17.00 mentioned above 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

S&F 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and incl 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces over 10 cm width or girth complete all as specified and directed.

Returning, filling in and including spreading, leveling, watering & well ramming in layers n.exceeding 25 cm in soft/loose soil complete all as specified and directed.

Removing of excavated materials to a distance n. exc 50m and depositing where directed at a level n exc 1.5m above the starting point in oft/loose soil complete all as specified.

Surface dressing n.exc 0.15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in bed concrete for foundation filling & mass concrete complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates (Fe 410-W (Gde -E-250) quality A complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe 410 -W (Gde E- 250) quality A complete all as specified and directed.

S&F mild steel screws bolts 5 to 10cm dia (machine made) with hexagonal or square heads at one end and screw the other or screwed both end to be fitted with wahsers and on hexagonal or square n.exc 5 cm long complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for prepration of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) 25 mm thick as in floor for receiving screed bed for floor finishes complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete lad over cement screed and jointed over screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finish complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface 350X 250x7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster in CM (1:4) on brick or concrete surfaces complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-Charge)

S&F PVC (SWR) floor trap 75mm dia of outlet plain with grating including jointing with solvent cement complete all as specified and directed

S&F PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal of 75 mm dia complete all as specified and directed.

S&F for CP Grating square with hole 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth complete all as specified and directed.

S&F for 20 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11 with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

All as per Item No 39.00 mentioned above but 25 mm outer dia complete all as specified and directed..

S&F Bib tap long body with CP nipple cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified.

M&L for laying Reinforced concrete pipes 150 mm in dia, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for Concrete bed to 150 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 using 40mm graded stone aggregate all as specified and directed.

M&L for precast cement concrete Type B-1,1:1.5:3 (using 20mm graded crushed stone aggregates) set in cm 1:4 as in mahhole cover etc complete all as specified and directed.

M&L for 75mm PCC 1:3:6 type C1 (using 20mm graded stone aggregate) fininshed the as in plinth protection surfaces even and smooth without using extra cement complete all as specified and directed.

Surface dressing n.exc (Not exceeding) 15 cm deep and getting out soft/loose soil complete all as specified and directed.

M&L for PCC (1:4:8) Type D2 using 40 mm graded aggregate used as in sub base floor/pavings and finishing complete all as specified and as directed.

Excavation in post holes (or similar holes) each n.exc 0.5 cum getting out, returning filling in and ramming earth and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) as Chajjas complete all as specified and directed.

M&L for reinforced cement concrete (Design Mix) M-25 (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

All as per item No 52.00 mentioned above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete complete all as specified and directed

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished flat surface for fair finished surfaces of concrete complete all as specified and directed

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, not exceeding 200m thick (Horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed.

M&L for old size brickwork with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed

M&L for Rendering 15 mm thick cement plaster in CM (1:6) on other than fair faces of brick/concrete work surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed..

M&L for prepration of newly plastered surfaces of wall and applying two coat of oil bound distemper over one coat of chalk whiting primer complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed (Note : Design, shade and pattern of fixing of tiles shall be as directed).

S&F tubular towel rail brass chromium plated 20 mm dia `D' type 60 cm long between flanges complete all as specified and directed.

S&F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing.

S&F 75 mm size butt hinges extruded aluminium alloy/Stainless steel with galavanised mild steel hing pin anodised and fixed type C-21 complete all as specified and directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed

S&F aluminium handles, cast type, anodised 150mm long complete all as specified and directed

S&F steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including hinges, steel peg stay, complete with glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specification complete all as specified and directed

S&F sheet glass 4 mm thick ordinary quality and glazing with oil putty and pin in square n.exc 0.50 sqm in each pan in wooden frame/steel frame complete all as specified and directed.

S&F vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and directed.

S&F 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (with brackets). Make- Hindware, Parryware, commander (Sim Line) incl flush pipe of plyethene of low or high density of PVC 32mm dia for low level cistern complete all as specified and directed.

S&F vitreous China wash basin white, flat back,size 550X450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white minimum), with grating and union for discharge pipe(back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.

S&F Bib tap long body with CP nipple cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F in CP Grating square with hole 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed

Supply flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed

S&F PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F soap dish, vitreous china white, approximate size 160 x 160 x 90mm complete all as specified and directed

S&F PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint , laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed

S&F for PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S&F for PVC SWR bends of 110 mm bore complete all as specified and directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth complete all as specified and directed.

S&F for Gun metal gate valve,20 mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

M&L for laying Reinforced concrete pipes 150 mm in dia, class NP2, laid and jointed complete with collars complete all as specified and directed..

M&L for Concrete bed to 150 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) complete all as specified and directed.

Cutting into existing manholes 150mm dia pipe for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as specified and directed.

M&L for precast cement concrete Type B-1,1:1.5:3 (using 20mm graded crushed stone aggregates) set in cm 1:4 as in mahhole cover etc complete all as specified and directed.

S&F of high pressure PTMT float valve with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 25mm bore dia with fly nut complete all as specified and directed.

S&F capacity 500 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top minimum three layer) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge

Excavation over area n.exc 1.50m deep and getting out soft/loose soil complete all as specified and directed.

Moorum/red bajri filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for PCC (1:2:4) 100 mm thick Type B1 (using 20 mm graded aggregate) used as in floor/pavings and finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

Removing Excavated soils exceeding 250 M but not exceeding 500 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

M&L forming construction joint 30mm deep X 10mm wide with sealing compound grade A complete all as specified and directed.

M&L for Cement concrete 1:3:6, type C-1(using 20mm graded stone aggregate) in surface channels and drains and Manholes complete all as specified and directed.

M&L for Extra for forming 30 cm inner girth fair finished drains or channels i.e. exc 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

M&L for RCC (1:1.5:3) type B1 (nominal mix) using 20 mm graded stone aggregate as in slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.

M&L for reinforced cement concrete (Design Mix) M-25 (20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as specified and directed.

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in columns, pillars, piers, etc complete all as specified and directed

M&L for formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions for fair finished surfaces of concrete complete all as specified and directed

M&L for rendering 5mm thick on fair faces of ceiling / chajja concrete surfaces in cement mortar 1:3 finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for 25 mm thick average PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in padding concrete on roof all as directed by Engineer- in-Charge.

M&L for rendering 10mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar 1:3 finished even and fair including using water proofing compound admixture as per manufacturer's instructions, complete all as specified and directed. Note :- WPC will measuered and paid separatly under relevant item of schedule. complete all as specified and directed.

S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application and also include one coat of aluminium paint over APP based polymeric membrane complete all as specified.

M&L for prepration of newly plastered surfaces of wall and applying two coat of oil bound distemper over one coat of alkali resistanse primer complete all as specified and directed.

M&L for prepration of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed

M&L for preparation new plastered surfaces and applying three coat of white washing on ceiling complete all as specified and directed

M&L for 100mm thick PCC type B-1, 1:2:4 (using 20mm graded aggregate) as sub base floor complete all as specified and directed.

M&L for cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) 25 mm thick as in floor for receiving screed bed for floor finishes complete all as specified and directed

S&F for Powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Sheet glass 5.5 mm thick , ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F in stop valve cast copper chromium plated concealed with long shank type screwed down, high pressure with capstan head suitable for 15 mm bore complete all as specified and directed.

S&F in angle valve cast copper alloy chromium plated concealed with long shank type screwed down, high pressure with capstan head suitable for 15 mm bore complete all as specified and directed.

S&F CP Grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed

Supply flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed

S&F PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F soap dish, vitreous china white, approximate size 160 x 160 x 90mm complete all as specified and directed

S&F Vitreus China bowl urinal flat back Size of 465 x 355 x 265 mm white with grating and union for discharge pipe complete all as specified and directed.

S&F Urinal Spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and directed.

S&F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

M&L for formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions for fair finished surfaces of concrete complete all as specified and directed

M&L for old size brickwork with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:6) complete all as specified and directed

M&L for Rendering 15 mm thick cement plaster in CM (1:6) on other than fair faces of brick/concrete work surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed..

M&L for rendering 5mm thick on fair faces of ceiling / chajja concrete surfaces in cement mortar (1:3) finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for rendering 5mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar (1:3) finished even and fair including using water proofing compound admixture as per manufacturer's instructions, complete all as specified and directed. Note :- WPC will measuered and paid separatly under relevant item of schedule. complete all as specified and directed.

M&L for providing water proofing treatment with a layer of APP based polymeric membrane 3mm thick minimum weighing 3.60kg/sqm reinforced with polyster non wove fabric (wt. not less than 160 gms/sqm) shall be applied over one coat of cold bituminous primer @ 0.40 ltr/sqm (membrane shall be laid using butane torch sealing all joints etc, complete all as specified and directed. (Note :- The over lap shall be of minimum 75mm in longitudinal direction and 100mm on transverse direction)

M&L for one coat of aluminium paint over APP membrane complete all as specified and directed.

M&L for preparation new plastered surfaces and applying three coat of white washing on ceiling complete all as specified and directed

S&F Anodised powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Anodised powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no). hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified and directed.

S&F Sheet glass 5.5 mm thick , ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F as in vitreous china wash down closet pan, pedestal pattern pedestal pan and trap (excluding flushing cistern and flush pipe), connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device complete all as specified and directed.

M&L for 18 to 20mm thick green marble (table rubbed and polished) in steps, jambs, pillars, window cills,bathroom corners cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directedcomplete all as specified and directed.

Rounding to edges of stone slabs exposed edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth complete all as specified and directed.

S&F for Gun metal gate valve,20 mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

M&L for 75mm PCC 1:3:6 type C1 (using 20mm graded stone aggregate) fininshed the as in plinth protection surfaces even and smooth without using extra cement complete all as specified and directed.

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.00m dia x 6.00m effective depth complete all as spd and directed

E/M PORTION M&L for concealed point wiring for light point/ fan point, one light/fan/call bell/lamp point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including modular cover plate with frame of suitable size and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

All as per item No 141.00 above 5 Amp socket on Independent board with other switches complete all as specified and directed.

M&L for concealed point wiring for 3 pin 5 Amps socket out let points on same board controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including modular cover plate with frame of suitable size and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

M&L for wiring for 3 pin socket out let on independent Board controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers or modular cover plate with frame of suitable size and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor, PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

S&F Switch piano, flush type single pole, one way 6 Amp complete all as specified and directed.

S&F Switch socket combination 2 in 1, 6A flush type complete all as specified and directed.

S&F Switch socket combination 6A/16A, 5 in 1 complete all as specified and directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.

S&F lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified and directed.

S&F concealed wiring of two single core, 4 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size medium grade PVC concealed conduit (ISI marked) with 4 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed 1100 Volts grade for earth wire complete all as specified. (Note : Chess cutting and making good to disturb surface incl painting is included in quotated rate)

S&F epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact complete all as specified and directed.

S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessry connection complete all as specified and directed.

S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection complete all as specified and directed.

S&F ventilating exhaust fan 450 mm sweep heavy duty 230 volt AC complete with louver and all accessories connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.

S&F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB complete all as specified and directed.

Earthing for poles & other machinery/equipment using 4 mm GI wire as earthing lead and MS galvanized plate of size 60 cm x 60 cm x 6 mm, as earth electrode complete all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1.00”) dia complete all as specified and directed.

M&L for Excavation in trenches upto 1.5m deep (Hard/dense soil) complete all as specified and directed.

M&L for Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) of size 25mm complete all as specified and directed.

M&L for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F capacity 1000 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top minimum three layer) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge Make : Vectus/Sintex/Prayag

M&L for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of sizes 25 Sqmm 4 Core

Supply and laying common burnt clay building sub class B old size bricks, laid in right angle along the cable, complete all as specified and directed.

M&L for wiring for socket outlet 3 pin, 15 amps on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified.

S&F switch piano flush type, single pole, 5/6 Amps, one way complete all as specified and directed.

S&F switch socket combination 2 in 1 multipurpose 5 pin, (6 Amps) flush type controlled by one switch complete all as specified and directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

S&F LED light fitting 1x 20 W LED light AC decorative box type with driver, holder including LED tube light connedting up with with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as specified and directed.

S&F LED light fitting 2 feet 1x 10 W LED light AC decorative box type with driver, holder including LED tube light connedting up with with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as specified and directed.

S&F in repair LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable complete all as specified and directed.

S&F steel body Exhaust ventilation fan of sweep 300mm after taking out the existing burnt out fan complete all as directed by Engr-in-Charge. Make :- Havells/Bajaj/Crompton.

S&F lamp holder, polycarbonatebody with back plate straight or angular suitable for batten fittings complete all as specified and directed.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact complete all as directed (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB, MCCB, PANAL of any rating).

S&F sheet metal enclosure with 20 Amp Mcb and two pin and earth plug and socket complete with one single pole MCB all as specified By Engr-in-Charge

S&F storage type water heater 25 Ltrs BEE 5 Star tated with all connecting items all as directed by Engr-in-Charge

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

S&F XLPE armoured cable 6 sqmm 2 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as specified and directed.

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note : Punned thickness shall be measured).

M&L for sub class B bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed.

M/S JOYGURU ENTERPRISE (BID ID -3118681)

SANJAY KUMAR SUPAN (BID ID -3119559)

M/s S A TRADING (BID ID -3119592)

KAZI SAHABUL ALAM (BID ID -3118813)