Loading
Loading…
Loading…
Tender Value
₹7.6 Cr
EMD Value
₹11.4 L
Closing Date
13 Jul 2026, 10:30 pm
Similar tender results from the same govt authority in the past 3 years.
Public Works Department
CONSTRUCTION OF BOYS/GIRLS HOSTEL AND STAFF HOUSING COMPLEX IN HALE VANTAMURI, HUKKERI TALUKA BELAGAVI DISTRICT UNDER HOA 4059-60-051-0-05-422 SCP FOR FY 2025-26
307248
PWD/2026-27/BD/WORK_INDENT36607
Open
Buildings
PWD Division Office Chikkodi
11 documents required · 11 mandatory
Satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar work such as Construction Of Building work of value not less than Rs. 381.37 Lakhs, in previous five years
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22,2022-23,2023-24,2024-25 & 2025-26 (c) executed in any one year, the following minimum quantities of work 1)Rubble stone Masonry/BBM/SSM-836.00 CUM,2)Plastering-10198.00 SQM,3)Concrete(PCC/RCC)-1566.00 CUM,4)Steel-140.00 TONNE 5)Flooring-2549.00 SQM &6)Excavation/Embakment/Subgrade-3920.00 Cum
Tenderers who meet the above specified minimum qualifying criteria will only be qualified,if their available tender capacity is more than the total tender value.The available tender capacity will be calculated as under Assessed available tender capacity is AXNX1.5-B where where A is Maximum value of civil engineering works executed in any one year during the last five years updated to 2025-26 price level taking into account the completed as well as works in progress.N is Number of years prescribed for completion of the works for which tenders are invited is 0.916 Year B is Value at 2026-27 price level, of existing commitments and on-going works to be completed during the next 0.916 year Period of completion of the works for which tenders are invited.
Maximum of Civil Engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. (Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2026-27)
Value at 2026-27 price level, of existing commitments and on-going works to be executed during the next 12 months(Financial commitment of previous years shall be given a weight of 10% per year to bring them to the price level of the 2026-27), (Monthwise commitment shall be furnished)
Availability by owning And Hiring the required or specified key and critical equipment for this work. (As Govt circular PWD.60.CRM.2021 Dated.08/11/2021)1)Availability by lease/hire Excavator-2 No,2)Availability by owning Tippers-3 Nos Owning & 3 Nos Hiring,3)Availability by owning Concrete Batching Plant-1No,4)Availability by owning Construction elevator/Building Hoist/Tower Cranes(Specify Machine)-1No,5)Availability by owning Water Tanker-2 No owning and 2 No hiring ,6)Availability by owning Shuttering materials-250 SQM Owning and 250 sqm hiring ,7)Availability by owning/hire Transit Mixers-1No and 8)Availability by lease/hire Pin and plate vibrator-2 No owning and 2 No hiring
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22,2022-23,2023-24,2024-25 & 2025-26 (a) acheived in at least two financial years a minimum financial turnover of Rs.1525.49 lakhs (in all classes of civil engineering construction works only)( Calculated as per Govt circular PWD.60.CRM.2021 Dated.08/11/2021)
Liquid Assets and or availability of credit facilities of no less than Rs. 208.02 Lakhs (Credit Lines or letter of credit or certificates from the banks for meeting the fund requirement etc
Report on the financial standing of the Tenderer, such as profit and loss statements and auditors report for the last five years.
The EMD of Rs.11,45,000.00 shall be paid in full through e payment or in two parts i.e. part (1) Rs.1,00,000.00 br e payment Part (2) Rs.10,45,000.00 EMD shall be in the form Bank Guarantee in the prescribed format obtained from any Nationalised / Scheduled Bank in favour of Executive Engineer, PWD Division, Chikodi payable at Chikodi
Constitutional or Legal Status of the Tenderer
Information on litigation in which the Tenderer is involved:
Principal Place of Business
Information on works which are yet to be completed
Information of the works for which Tender acceptance letters are received.
Name, Address, telephone No., Fax No., and email ID of the Tenderers Bankers
Information of the works for which Tenderer has submitted Tender
Assessed Tender Capacity shall be more than the Tendered Amount
₹5,000
₹11.4 L
20 Jun 2026
20 Jun 2026
15 Jul 2026
10 Jul 2026
8 Jul 2026
PÉ®¸ÀzÀ ºÉ¸ÀgÀÄ : ¨É¼ÀUÁ« f¯Éè aPÉÆÌÃr vÁ®ÆQ£À §¼ÉÆèÁ PÁæ¸ï¢AzÀ ªÀÄÄzsÉÆüÀ ¤¥Áàt gÀ¸ÉÛ ªÀgÉUÉ ªÁíAiÀiÁ gÁªÀÄ¥ÀÆgÀ gÀ¸ÉÛ ¸ÀÄzsÁgÀuÉ ªÀiÁqÀĪÀÅzÀÄ. (UÁæ«ÄÃt gÀ¸ÉÛ)
Sl no Items Qty Rate Amount
Construction of Road
2 Earthwork excavation by mechanical means in hard /ordinary soil involving an average horizontal throw upto 2mtrs. & average lift upto 0.5mtrs. excavated surface levelled and sides neatly dressed etc. the desposed earth to be levelled neatly after the breaking of clods completed as per specifications MORTH clause 301. (P No-139 / 19.2.1) Cum 2057.75 31.50 64819.13 4115.50 2057.75 31.50 64819.13 50% 129638.25
7 KSRRB M500-6.KSRRB M500-6. Providing and applying primer coat with S.S. bitumen emulsion on prepared surface of granular base such as WBM, WMM including cleaning of road surface and spraying primer at the rate of 0.60 kg / sqm using mechanical means complete as per specifications. MORTH Specification No. 502 (P No-158 / 21.6 sqm 4137.50 30.40 125780.00 8275.00 4137.50 30.40 125780.00 50% 251560
8 KSRRB M500-10. Tack Coat:- Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechancial broom. complete as per specifications. MORTH Specification No. 503 (P No-159 / 21.10.2) using Bitumen 80/100 sqm 4137.50 10.67 44147.13 8275.00 4137.50 10.67 44147.13 50% 88294.25
9 KSRRB M500-18. Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder at 4.5 to 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 500.8 complete in all respects complete as per specifications. (P No-160 / 21.20.6) 25-30mm compacted thickness with 5% bitumen using 60/70 using 40-60 HMP using mechanical paver (Grading-II) cum 103.44 7867.49 813793.50 206.88 103.44 7867.49 813793.50 50% 1627586.994
10 KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory roller)MORTH Specification No. 305 (P No-145 / 19.62) cum 215.31 445.20 95857.13 430.63 215.31 445.20 95857.13 50% 191714.25
Construction of Road
2 Earthwork excavation by mechanical means in hard /ordinary soil involving an average horizontal throw upto 2mtrs. & average lift upto 0.5mtrs. excavated surface levelled and sides neatly dressed etc. the desposed earth to be levelled neatly after the breaking of clods completed as per specifications MORTH clause 301. (P No-139 / 19.2.1) Cum 2057.75 31.50 64819.13 4115.50 2057.75 31.50 64819.13 50%
7 KSRRB M500-6.KSRRB M500-6. Providing and applying primer coat with S.S. bitumen emulsion on prepared surface of granular base such as WBM, WMM including cleaning of road surface and spraying primer at the rate of 0.60 kg / sqm using mechanical means complete as per specifications. MORTH Specification No. 502 (P No-158 / 21.6 sqm 4137.50 30.40 125780.00 8275.00 4137.50 2571.45 10639374.38 50%
8 KSRRB M500-10. Tack Coat:- Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechancial broom. complete as per specifications. MORTH Specification No. 503 (P No-159 / 21.10.2) using Bitumen 80/100 sqm 2482.50 10.67 26488.28 8275.00 2482.50 30.40 75468.00 30%
9 KSRRB M500-18. Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder at 4.5 to 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 500.8 complete in all respects complete as per specifications. (P No-160 / 21.20.6) 25-30mm compacted thickness with 5% bitumen using 60/70 using 40-60 HMP using mechanical paver (Grading-II) cum 62.06 7867.49 488276.10 206.88 62.06 7867.49 488276.10 30%
10 KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory roller)MORTH Specification No. 305 (P No-145 / 19.62) cum 129.19 445.20 57514.28 430.63 129.19 445.20 57514.28 30%
Construction of Road
8 KSRRB M500-10. Tack Coat:- Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechancial broom. complete as per specifications. MORTH Specification No. 503 (P No-159 / 21.10.2) using Bitumen 80/100 sqm 1655.00 10.67 17658.85 8275.00 1655.00 10.67 17658.85 20%
9 KSRRB M500-18. Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder at 4.5 to 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 500.8 complete in all respects complete as per specifications. (P No-160 / 21.20.6) 25-30mm compacted thickness with 5% bitumen using 60/70 using 40-60 HMP using mechanical paver (Grading-II) cum 41.38 7867.49 325517.40 206.88 41.38 7867.49 325517.40 20%
10 KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory roller)MORTH Specification No. 305 (P No-145 / 19.62) cum 86.13 445.20 38342.85 430.63 86.13 445.20 38342.85 20%
11 KSRRB M800-13. Road marking with Hot Applie Thermoplastic Compound with Reflecting Glass Beads on Bitumimous Surface :- Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads at 250gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per specifications. (P No-179 / 24.15) MORTH specification No. 803 sqm 375.00 537.60 201600.00 0.00 537.60 0.00 100% 201600.00
15 KSRRB M800-2. Retro-Reflectorised Traffic Signs :- Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 800.1.3, fixed over Aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing complete as per specifications. MORTH Specification No.801 (P No-177 / 24.2.4.1) 80cm x 60cm rectangular - Type-IV sqm 2.00 3867.15 7734.30 0.00 3867.15 0.00 100% 7734.30
16 KSRRB M800 Road markers / Road stud KSRRB M800-35. Providing and fixing of road stud 100x 100 mm, diecast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS: 873 part 4:1973 complete as per specifications (P No-184 / 24.41) no 80.00 352.80 28224.00 0.00 352.80 0.00 100% 28224.00
1 19.59 KSRRB M300-52.2. Scarifying Existing Bituminous surface to a depth of 50mm by Mechanical Means. Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material and complete as per specifications. MORTH Specification No. 305.4.3 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 3840 3.57 13708.8 View RA
2 19.2.1 KSRRB 300-1. Earthwork excavation by mechanical means for roads, drains & similar works in all types soils involving an average horizontal through upto 2 mtrs and an average lift upto 1.5 mtr to 2 mtr excavated surface levelled and sides neatly dressed, the disposed earth to be levelled neatly after breaking of clods complete as per specifications. MORTH I Chapter 3 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 3904.2 31.5 122982.3 View RA
3 19.64 KSRRB 300-Compaction KSRRB 300-58. Compaction of original ground with maximum of 6 passes of 8 to 10 tonnes power roller including filling in depression occuring during rolling including cost of all labour, HOM of machinery complete as per specifications. MORTH / Chapter 3 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 11640 6.3 73332 View RA
4 19.62 KSRRB M300-Construction of Subgrade and Earthen Shoulders. KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory rollercompaction by vibratory roller to 97% of proctors density) MORTH Specification No. 305 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 2541.1875 502.95 1278090.25 View RA
5 20.5 Construction of granular sub-base Grading-V as Sub-base and drainage layer by providing coarse graded crushed stone aggregates of granite/trap/basalt material, mixing by mix in place method by rotavator at OMC, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the 98 % proctor density, complete as per specifications. Clause 401 of MORTH V Revision. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 1499.4 1837.5 2755147.5 View RA
6 22.1.2 KSRRB M600-1.Providing and Constructing dry lean cement concrete mix CC 1:5:10 base with OPC 25mm and down size graded granite metal coarse aggregate at 0.86cum and fine aggregates @0.58cum over a prepared sub-base, coarse and fine aggregate conforming to IS: 383-2016,aggregate cement ratio not to exceed 15:1, Aggregate gradation after blending to be as per Table 600-1,optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver, compacting with 8-10 tonnes vibratory roller, finishing and curing complete as per specifications. Clause 601of MORTH V Revision and IS 456 Table-5 with OPC at 150 kg/cum and coarse aggregate 0.86cum, fine aggregate 0.58cum using Concrete Batch mix Plant at 75 cum/hr capacity with fixed form paver. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 591.3 3953.25 2337556.72 View RA
7 22.2.2 KSRRB M600-2. Providing and Constructing un-reinforced, dowel jointed, plain cement Pavement Quality concrete for pavements using Grade concrete M40 having Flexural strength not less than 4.50 Mpa over a prepared base with OPC, coarse aggregate at 0.64 cum, fine aggregates at 0.36 cum,Coarse and fine aggregate conforming to IS:383- 2016 and Table 600-3 of MORTH V Revision, with Superplastizer at 3 Its conforming to IS 9103-2008. loading materials to batch mix plant by front end loader,mixed in a cement concrete batch mix plant as per approved mix design,transported to site in transit truck agitator 5 cum capacity, laid with Paver, compacted and finished in a continuous operation as per IRC-15 including cost for providing of contraction,expansion, co nstruction and longitudinal joints, joint filler, separation membrane of impermiable plastic sheet of 125 micron, groove cutting,sealant primer joint sealent, debonding strip,dowel bars at 9 kg/cum, tie rods at 1.15 kg/cum, admixtures as approved, curing compound, finishing to lines and grades, textured with texturing machine, and curing including cost of all materials, labour,hire charges of machineries, aII lead & lift charges etc., complete as per specifications. Clause 601of MORTH V Revision and IS 456 Table-5 with OPC at 420 kg/cum and coarse aggregate 0.64cum, fine aggregate 0.36cum using Concrete Batch mix Plant at 75 cum/hr capacity with Slip form paver with electronic sensor. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 978.75 5757.15 5634810.56 View RA
8 34.17 Providing and laying in position plain/Reinforced cement cement concrete M20 for sub-structure/Superstructure works, with cement @ 320 kgs, 20 mm & down size graded granite metal coarse aggregate @ 0.69 cum and fine aggregates @ 0.46 cum machine mixed with super plasticisers @ 3 lts confirming to IS 9103-2008,concrete laid in layers, well compacted and providing weep holes wherever necessary with necessary scaffolding, form work etc., including cost of labour, HOM curing etc., complete. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 16.2 5268.9 85356.18 View RA
9 20.18 KSRRB M400- Wet Mix Macadam KSRRB M400-17. Providing, laying, spreading and compacting crushed stone aggregates of granite / trap / basalt to wet mix macadam specifications including pre mixing the material with water at OMC in mechanical mix plant carriage of mixed method of tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per specifications. MORTH Specification No. 406 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 150.375 1917.3 288313.99 View RA
10 21.6 KSRRB M500-6. Providing and applying primer coat with S.S. bitumen emulsion on prepared surface of granular base such as WMM including cleaning of road surface and spraying primer at the rate of 0.60 kg / sqm using mechanical means complete as per specifications. MORTH Specification No. 502 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 701.25 35.7 25034.63 View RA
11 21.1 KSRRB M500-10. Providing and applying tack coat using 80/100 grade bitumen(VG10) in boiler fitted with spray set distributor at the rate of 0.20 kg per sqm on the existing prepared bituminous surface cleaned with mchancial broom. complete as per specifications. - using bitumen 80/100 on primed surfaces ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 701.25 12.6 8835.75 View RA
12 21.11.6 KSRRB 500-11. Providing and laying bituminous macadam on prepared surface with crushed coarse aggregates as per design mix formula for base / binding course including loading of aggregates with F.E. loader, hot mixing of stone aggregates and bitumen in hot mix plant, transporting the mixd material in tipper to paver and laying mixed materials with paver finisher to the required level and grade, rolling by power roller to achieve the desired density, but excluding cost of primer / tack coat including lead, lift and cost of all materials, labour, HOM of machineries complete as per specifications. MORTH /Chapter 5 - using 40/60 TPH capacity H.M.P. with Mechanical paver Gr-II (50 mm to 75 mm) with 3.3 % VG-30 Bitumen ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 35.0625 6252.75 219237.05 View RA
13 21.20.6 KSRRB M500-18. Providing and laying semi dense bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site, laying with a paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 508 complete in all respects complete as per specifications. - using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-II (25 mm to 30 mm) with 5 % VG-30 Bitumen ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 17.5313 8262.45 144851.49 View RA
14 24.17 KSRRB M800-14.2. Reinforced cement concrete M-15 Grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc complete as per specifications.including additional M-15 concrete pedestal of 0.2mt. height above G.L. MORTH Specification No. 804 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Nos 1 2261.7 2261.7 View RA
15 24.18 KSRRB M800-14.3. Reinforced cement concrete M-15 Grade Hectometer stone of standard design as per IRC:26-1980, fixing in position including painting and printing etc complete as per specifications. including additional M-15 concrete pedestal of 0.2mt. height above G.L. MORTH Specification No. 804 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Nos 3 573.3 1719.9 View RA
16 24.15 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on Bituminous Surface:- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per specifications. MORTH Specification No. 803 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 209.9997 450.45 94594.36 View RA
17 24.41 KSRRB M800 Road markers I Road stud KSRRB MS00-35. Supply and lnstalltion of Moulded Shank Raised Pavement Markers made of polycarbonate and ABS(Acrylonitrile Butadiene Styrene) moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to Specifications of Category A of MORTH Circular No RW/ NH/33023/10-97- DO Ill Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 1DO mm and 102 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 mm and height not less than 30 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Nos 216 303.45 65545.2 View RA
18 24.2.1 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 em x 45 em x 60 em, 60 em below ground level as per approved drawing. 900 M M Equilateral triangle -TYPE XI ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. No 4 3639.3 14557.2 View RA
19 24.3 Direction and Place Identification Signs upto 0.9 sqm Size Board: Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 x 45 x 60 em, 60 em below ground level as per approved drawing. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 2.16 7220.85 15597.04 View RA
20 14.7 KSRB 14.6-2 :Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per sqm over 50mm thick sand bed (average thickness ) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and HOM of machineries complete as per specifications. Specification No. KBS ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 6840 1014.3 6937812
1 27.13 “KSRRB M2100-5.2. Earth work in excavation for foundation of structures as per drawing and technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material complete as per specifications. “V. Marshy soil - B. Mechanical Means MORTH Specification No. 304 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 3060 152.25 465885
2 34.15.2 Earth work in excavation for foundation of structures like culverts, retaining walls etc., as per drawing and technical specification, including setting out, construction of shoring and bracing, dressing of sides and bottom, backfilling with approved material, disposal of balance earth as per specifications, including cost of labour, HOM etc. , complete. in all kinds of soil by mechanical means. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 3249.342 47.25 153531.41
3 34.1 KSRRB M2900- PCC M10 in Foundation KSRRB M2900-1. Plain cement concrete M10 mix with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing including cost of materials, labour, HOM complete as per specifications. MORTH Specification No. 408 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 600.1628 4506.6 2704693.67
4 37.59.2 Providing and laying plain/reinforced cement concrete for side drains using M20 nominal mix concrete with OPC at 300 kgs. with 20mm and down size granite metal coarse aggregates at 0.69 cum and fine aggregates at 0.43 cum machine mixed, well compacted for walls and bottom including centering, shuttering, cost of materials, HOM of machinery, curing etc., complete excluding cost of steel as per MORTH specification No. 1500, 1700, 2200. including cost of materials, labour, HOM complete as per specifications. Wall & bottom thickness 15cm ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 1246.5 7269.15 9060995.48
5 28.8.2 KSRRB M2200-6. Providing T. M.T. steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per disign (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specification. MORTH Specification No.1600 & 2200 TMT Bars Fe 500 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Tonne 78.14 70920.15 5541700.52
6 34.17 Providing and laying in position plain/Reinforced cement cement concrete M20 for sub-structure/Superstructure works, with cement @ 320 kgs, 20 mm & down size graded granite metal coarse aggregate @ 0.69 cum and fine aggregates @ 0.46 cum machine mixed with super plasticisers @ 3 lts confirming to IS 9103-2008,concrete laid in layers, well compacted and providing weep holes wherever necessary with necessary scaffolding, form work etc., including cost of labour, HOM curing etc., complete. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 313.9866 5268.9 1654364
7 34.6.6 Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing complete as per specifications. Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 1200mm. dia ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. M 45 8848.35 398175.75
8 34.6.2 Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing complete as per specifications. Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 450mm. dia ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. M 120 2711.1 325332
9 19.62 KSRRB M300-Construction of Subgrade and Earthen Shoulders. KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory rollercompaction by vibratory roller to 97% of proctors density) MORTH Specification No. 305 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 1528.3602 502.95 768688.76
10 27.4 “KSRRB M2100-2.1. Earth work in excavation for foundation of structures as perdrawing and technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material complete as per specifications. B. Mechanical Means (i ) Depth upto 3 m” MORTH Specification No. 304 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 1087.5 52.5 57093.75
11 11.56.1 Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgf/sq.cm working pressure chemp plast / Wavin or equivalent make with pipe fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, with 90mm outer dia ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. M 2900 452.55 1312395
NAME OF WORK: CONSTRUCTION OF BOYS/GIRLS HOSTEL AND STAFF HOUSING COMPLEX IN HALE VANTAMURI, HUKKERI TALUKA BELAGAVI DISTRICT UNDER HOA 4059-60-051-0-05-422 SCP AND 4059-60-051-0-05-423 TSP FOR FY 2025-26
Sl no Items Unit Qty Rate Amount Milestone -1 Quantity Milestone -2 Quantity Milestone -3 Quantity Total Quantity Rate in Rs. Amount for Mile Stone 1 in Rs Amount for Mile Stone 2 in Rs Amount for Mile Stone 3 in Rs Total Amount in Rs
1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter includingdressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage ofmachinery & other appurtenances required to complete the work.In all kinds of soils upto 300 mm depth m³ 80.12 95.00 7611.40 80.12 0.00 0.00 80.12 95 7611.40 0.00 0.00 7611.40 0.00
2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m m³ 228.97 102.00 23354.94 228.97 0.00 0.00 228.97 102 23354.94 0.00 0.00 23354.94 0.00
3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth m³ 343.45 363.00 124673.08 343.45 0.00 0.00 343.45 363 124673.08 0.00 0.00 124673.08 0.00
4 Providing and laying in position Cement Concrete for levelling course for all works in foundation.The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. m³ 138.84 5918.00 821655.12 138.84 0.00 0.00 138.84 5918 821655.12 0.00 0.00 821655.12 0.00
5 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 145.26 6725.16 976896.74 145.26 0.00 0.00 145.26 6725.16 976896.74 0.00 0.00 976896.74 0.00
6 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 12.05 10585.90 127560.10 12.05 0.00 0.00 12.05 10585.9 127560.10 0.00 0.00 127560.10 0.00
7 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) m3 97.65 6594.00 643904.10 97.65 0.00 0.00 97.65 6594 643904.10 0.00 0.00 643904.10 0.00
8 Providing ruled pointing to cursed stone masonry with lime mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost all materials, labour, usage charges of achinery, curing complete as pre specification. m2 72.88 255.00 18584.40 72.88 0.00 0.00 72.88 255 18584.40 0.00 0.00 18584.40 0.00
9 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 29.22 9340.50 272929.41 29.22 0.00 0.00 29.22 9340.5 272929.41 0.00 0.00 272929.41 0.00
10 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 17.37 11447.80 198848.29 17.37 0.00 0.00 17.37 11447.8 198848.29 0.00 0.00 198848.29 0.00
11 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 35.69 10774.40 384538.34 35.69 0.00 0.00 35.69 10774.4 384538.34 0.00 0.00 384538.34 0.00
12 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 82.57 10101.00 834064.82 82.57 0.00 0.00 82.57 10101 834064.82 0.00 0.00 834064.82 0.00
13 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. m3 228.97 266.00 60905.49 228.97 0.00 0.00 228.97 266 60905.49 0.00 0.00 60905.49 0.00
14 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. m3 856.35 474.00 405908.19 856.35 0.00 0.00 856.35 474 405908.19 0.00 0.00 405908.19 0.00
15 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier underand around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along theexternal perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. m2 531.36 118.00 62700.48 531.36 0.00 0.00 531.36 118 62700.48 0.00 0.00 62700.48 0.00
16 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 102.75 7948.00 816657.00 102.75 0.00 0.00 102.75 7948 816657.00 0.00 0.00 816657.00 0.00
17 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m2 158.72 1029.00 163322.88 158.72 0.00 0.00 158.72 1029 163322.88 0.00 0.00 163322.88 0.00
18 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specificationsM25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 7.75 9764.30 75673.33 7.75 0.00 0.00 7.75 9764.3 75673.33 0.00 0.00 75673.33 0.00
19 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.12 138074.00 16568.88 0.12 0.00 0.00 0.12 138074 16568.88 0.00 0.00 16568.88 0.00
20 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.48 98815.00 47431.20 0.48 0.00 0.00 0.48 98815 47431.20 0.00 0.00 47431.20 0.00
21 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section m 60.10 239.00 14363.90 0.00 0.00 60.10 60.10 239 0.00 0.00 14363.90 14363.90 0.00
22 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. m2 4.50 7085.00 31882.50 0.00 0.00 4.50 4.50 7085 0.00 0.00 31882.50 31882.50 0.00
23 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyderesin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 30 mm thick Both side teak m2 32.50 4043.00 131397.50 32.50 0.00 0.00 32.50 4043 131397.50 0.00 0.00 131397.50 0.00
24 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness m2 20.37 3485.00 70989.45 0.00 0.00 20.37 20.37 3485 0.00 0.00 70989.45 70989.45 0.00
25 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 2948.70 183.00 539612.10 0.00 0.00 2948.70 2948.70 183 0.00 0.00 539612.10 539612.10 0.00
26 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 63.75 6734.00 429292.50 0.00 0.00 63.75 63.75 6734 0.00 0.00 429292.50 429292.50 0.00
27 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass.Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 23.94 5719.00 136912.86 0.00 0.00 23.94 23.94 5719 0.00 0.00 136912.86 136912.86 0.00
28 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 63.75 687.00 43796.25 63.75 0.00 0.00 63.75 687 43796.25 0.00 0.00 43796.25 0.00
29 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 4.50 8276.00 37242.00 4.50 0.00 0.00 4.50 8276 37242.00 0.00 0.00 37242.00 0.00
30 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 248.70 565.00 140515.50 248.70 0.00 0.00 248.70 565 140515.50 0.00 0.00 140515.50 0.00
31 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 1425.58 253.00 360671.74 1425.58 0.00 0.00 1425.58 253 360671.74 0.00 0.00 360671.74 0.00
32 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 2016.75 100.00 201675.00 2016.75 0.00 0.00 2016.75 100 201675.00 0.00 0.00 201675.00 0.00
33 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 551.19 347.00 191262.93 551.19 0.00 0.00 551.19 347 191262.93 0.00 0.00 191262.93 0.00
34 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 83.00 64.00 5312.00 83.00 0.00 0.00 83.00 64 5312.00 0.00 0.00 5312.00 0.00
35 Polymerized plaster reinforced with glass fibre mesh m2 315.00 317.00 99855.00 0.00 0.00 315.00 315.00 317 0.00 0.00 99855.00 99855.00 0.00
36 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. m2 13.48 1229.00 16560.78 0.00 0.00 13.48 13.48 1229 0.00 0.00 16560.78 16560.78 0.00
37 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ( Volume 1 Page No 18 Item No 2.11.a) t 34.53 90464.00 3124025.76 0.00 0.00 34.53 34.53 90464 0.00 0.00 3124025.76 3124025.76 0.00
38 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile Size of Tile 600x600 mm m2 360.73 1171.00 422414.83 0.00 0.00 360.73 360.73 1171 0.00 0.00 422414.83 422414.83 0.00
39 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. m2 144.01 2848.00 410140.48 0.00 0.00 144.01 144.01 2848 0.00 0.00 410140.48 410140.48 0.00
40 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m2 58.80 885.00 52038.00 0.00 0.00 58.80 58.80 885 0.00 0.00 52038.00 52038.00 0.00
41 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. m2 49.75 5326.00 264968.50 0.00 0.00 49.75 49.75 5326 0.00 0.00 264968.50 264968.50 0.00
42 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m2 103.02 1446.00 148966.92 0.00 0.00 103.02 103.02 1446 0.00 0.00 148966.92 148966.92 0.00
43 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. m2 2.16 2085.00 4503.60 0.00 0.00 2.16 2.16 2085 0.00 0.00 4503.60 4503.60 0.00
44 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 2016.75 127.00 256127.25 0.00 0.00 2016.75 2016.75 127 0.00 0.00 256127.25 256127.25 0.00
45 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 551.19 174.00 95907.06 0.00 0.00 551.19 551.19 174 0.00 0.00 95907.06 95907.06 0.00
46 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 96.87 53.00 5134.11 0.00 0.00 96.87 96.87 53 0.00 0.00 5134.11 5134.11 0.00
47 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge m2 96.20 135.00 12987.00 0.00 0.00 96.20 96.20 135 0.00 0.00 12987.00 12987.00 0.00
48 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 96.87 139.00 13464.93 0.00 0.00 96.87 96.87 139 0.00 0.00 13464.93 13464.93 0.00
49 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos. 12.00 1015.00 12180.00 0.00 0.00 12.00 12.00 1015 0.00 0.00 12180.00 12180.00 0.00
50 Providing and fixing following fixtures to doors and windows. 0.00 0.00 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00
51 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type)(Volume 2 Page No 176 Item No. 20.34.1) Each 62.00 170.00 10540.00 0.00 0.00 62.00 62.00 170 0.00 0.00 10540.00 10540.00 0.00
52 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No A-27 Sl.No 285 ) Each 48.00 50.00 2400.00 0.00 0.00 48.00 48.00 50 0.00 0.00 2400.00 2400.00 0.00
53 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm(Volume 2 Page No 108 Item No. 12.73.1) Each 24.00 44.00 1056.00 0.00 0.00 24.00 24.00 44 0.00 0.00 1056.00 1056.00 0.00
54 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (Volume 2 Page No 107 Item No. 12.60 ) Each 24.00 1052.00 25248.00 0.00 0.00 24.00 24.00 1052 0.00 0.00 25248.00 25248.00 0.00
55 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete (Volume 2 Page No 107 Item No. 12.63) Nos 40.00 130.00 5200.00 0.00 0.00 40.00 40.00 130 0.00 0.00 5200.00 5200.00 0.00
56 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (Volume 2 Page No 107 Item No. 12.58) Nos 12.00 120.00 1440.00 0.00 0.00 12.00 12.00 120 0.00 0.00 1440.00 1440.00 0.00
13403872.62 Grand Total Rs 7195661.09 0.00 6208211.53 13403872.62 0.00 0.00 0.00 0.00 #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE!
FIRST FLOOR 0.00
1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 17.37 11562.28 200836.77 0.00 17.37 0.00 17.37 11562.278 0.00 200836.77 0.00 200836.77 0.00
2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 35.27 10882.14 383813.22 0.00 35.27 0.00 35.27 10882.144 0.00 383813.22 0.00 383813.22 0.00
3 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 78.61 10202.01 801961.23 0.00 78.61 0.00 78.61 10202.01 0.00 801961.23 0.00 801961.23 0.00
4 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 108.29 8027.48 869295.81 0.00 108.29 0.00 108.29 8027.48 0.00 869295.81 0.00 869295.81 0.00
5 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m2 135.89 1039.29 141229.12 0.00 135.89 0.00 135.89 1039.29 0.00 141229.12 0.00 141229.12 0.00
6 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specificationsM25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 10.79 9861.94 106410.36 0.00 10.79 0.00 10.79 9861.943 0.00 106410.36 0.00 106410.36 0.00
7 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.63 99803.15 62875.98 0.00 0.63 0.00 0.63 99803.15 0.00 62875.98 0.00 62875.98 0.00
8 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section m 60.00 241.39 14483.40 0.00 60.00 0.00 60.00 241.39 0.00 14483.40 0.00 14483.40 0.00
9 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyderesin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 30 mm thick Both side teak m2 34.25 4083.43 139857.48 0.00 34.25 0.00 34.25 4083.43 0.00 139857.48 0.00 139857.48 0.00
10 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness m2 20.16 3519.85 70960.18 0.00 20.16 0.00 20.16 3519.85 0.00 70960.18 0.00 70960.18 0.00
11 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 2745.00 184.83 507358.35 0.00 2745.00 0.00 2745.00 184.83 0.00 507358.35 0.00 507358.35 0.00
12 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 60.60 6801.34 412161.20 0.00 60.60 0.00 60.60 6801.34 0.00 412161.20 0.00 412161.20 0.00
13 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass.Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 30.90 5776.19 178484.27 0.00 30.90 0.00 30.90 5776.19 0.00 178484.27 0.00 178484.27 0.00
14 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 92.04 570.65 52522.63 0.00 92.04 0.00 92.04 570.65 0.00 52522.63 0.00 52522.63 0.00
15 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 1305.14 255.53 333502.42 0.00 1305.14 0.00 1305.14 255.53 0.00 333502.42 0.00 333502.42 0.00
16 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 1604.75 101.00 162079.75 0.00 1604.75 0.00 1604.75 101 0.00 162079.75 0.00 162079.75 0.00
17 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 617.51 350.47 216418.73 0.00 617.51 0.00 617.51 350.47 0.00 216418.73 0.00 216418.73 0.00
18 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 93.00 64.64 6011.52 0.00 93.00 0.00 93.00 64.64 0.00 6011.52 0.00 6011.52 0.00
19 Polymerized plaster reinforced with glass fibre mesh m2 315.00 320.17 100853.55 0.00 315.00 0.00 315.00 320.17 0.00 100853.55 0.00 100853.55 0.00
20 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification t 18.20 91368.64 1662909.25 0.00 18.20 0.00 18.20 91368.64 0.00 1662909.25 0.00 1662909.25 0.00
21 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile Size of Tile 600x600 mm m2 373.43 1182.71 441659.40 0.00 373.43 0.00 373.43 1182.71 0.00 441659.40 0.00 441659.40 0.00
22 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. m2 90.15 2876.48 259314.67 0.00 90.15 0.00 90.15 2876.48 0.00 259314.67 0.00 259314.67 0.00
23 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m2 53.40 893.85 47731.59 0.00 0.00 53.40 53.40 893.85 0.00 0.00 47731.59 47731.59 0.00
24 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. m2 23.66 5379.26 127273.29 0.00 0.00 23.66 23.66 5379.26 0.00 0.00 127273.29 127273.29 0.00
25 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m2 180.18 1460.46 263145.68 0.00 0.00 180.18 180.18 1460.46 0.00 0.00 263145.68 263145.68 0.00
26 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. m2 2.16 2105.85 4548.64 0.00 0.00 2.16 2.16 2105.85 0.00 0.00 4548.64 4548.64 0.00
27 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 1604.75 128.27 205841.28 0.00 0.00 1604.75 1604.75 128.27 0.00 0.00 205841.28 205841.28 0.00
28 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge m2 617.51 175.74 108521.21 0.00 0.00 617.51 617.51 175.74 0.00 0.00 108521.21 108521.21 0.00
29 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease,dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 91.20 53.53 4881.94 0.00 0.00 91.20 91.20 53.53 0.00 0.00 4881.94 4881.94 0.00
30 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge m2 88.72 136.35 12096.97 0.00 0.00 88.72 88.72 136.35 0.00 0.00 12096.97 12096.97 0.00
31 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.( Volume 2 Page No 47 Item No 8.33.3) m2 91.20 140.39 12803.57 0.00 0.00 91.20 91.20 140.39 0.00 0.00 12803.57 12803.57 0.00
32 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. m3 22.06 2037.17 44939.97 0.00 0.00 22.06 22.06 2037.17 0.00 0.00 44939.97 44939.97 0.00
33 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. m2 93.40 825.17 77070.88 0.00 0.00 93.40 93.40 825.17 0.00 0.00 77070.88 77070.88 0.00
34 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.( Volume 2 Page No 104 Item No 12.51) Nos. 11.00 1025.15 11276.65 0.00 0.00 11.00 11.00 1025.15 0.00 0.00 11276.65 11276.65 0.00
35 Providing and fixing following fixtures to doors and windows. 0.00 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00
36 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) Each 60.00 171.70 10302.00 0.00 0.00 60.00 60.00 171.7 0.00 0.00 10302.00 10302.00 0.00
37 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No A-27 Sl.No 285 ) Each 44.00 50.00 2200.00 0.00 0.00 44.00 44.00 50 0.00 0.00 2200.00 2200.00 0.00
38 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm Each 22.00 44.44 977.68 0.00 0.00 22.00 22.00 44.44 0.00 0.00 977.68 977.68 0.00
39 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 22.00 1062.52 23375.44 0.00 0.00 22.00 22.00 1062.52 0.00 0.00 23375.44 23375.44 0.00
40 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Nos 40.00 131.30 5252.00 0.00 0.00 40.00 40.00 131.3 0.00 0.00 5252.00 5252.00 0.00
41 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Nos 20.00 121.20 2424.00 0.00 0.00 20.00 20.00 121.2 0.00 0.00 2424.00 2424.00 0.00
TERRECE FLOOR 0.00
1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 1.90 11676.76 22185.84 0.000 1.90 0.00 1.900 11676.756 0.00 22185.84 0.00 22185.84 0.00
2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates m³ 4.32 10658.90 46046.44 0.000 4.32 0.00 4.32 10658.898 0.00 46046.44 0.00 46046.44 0.00
3 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 3.31 10989.89 36376.53 0.000 3.31 0.00 3.31 10989.888 0.00 36376.53 0.00 36376.53 0.00
4 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 28.54 8106.96 231372.64 0.000 28.54 0.00 28.54 8106.96 0.00 231372.64 0.00 231372.64 0.00
5 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 0.25 9959.59 2489.90 0.000 0.25 0.00 0.25 9959.586 0.00 2489.90 0.00 2489.90 0.00
6 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.05 100791.30 5039.56 0.000 0.05 0.00 0.05 100791.3 0.00 5039.56 0.00 5039.56 0.00
7 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) m2 3.25 7226.70 23486.78 0.000 3.25 0.00 3.25 7226.7 0.00 23486.78 0.00 23486.78 0.00
8 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 81.00 186.66 15119.46 0.000 81.00 0.00 81.00 186.66 0.00 15119.46 0.00 15119.46 0.00
9 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 2.70 6868.68 18545.44 0.000 2.70 0.00 2.70 6868.68 0.00 18545.44 0.00 18545.44 0.00
10 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 48.28 258.06 12459.14 0.000 48.28 0.00 48.28 258.06 0.00 12459.14 0.00 12459.14 0.00
11 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 48.28 102.00 4924.56 0.000 48.28 0.00 48.28 102 0.00 4924.56 0.00 4924.56 0.00
12 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 267.77 353.94 94774.51 0.000 267.77 0.00 267.77 353.94 0.00 94774.51 0.00 94774.51 0.00
13 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 40.00 65.28 2611.20 0.000 40.00 0.00 40.00 65.28 0.00 2611.20 0.00 2611.20 0.00
14 Polymerized plaster reinforced with glass fibre mesh m2 18.00 323.34 5820.12 0.000 18.00 0.00 18.00 323.34 0.00 5820.12 0.00 5820.12 0.00
15 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification t 1.55 92273.28 143023.58 0.000 1.55 0.00 1.55 92273.28 0.00 143023.58 0.00 143023.58 0.00
16 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 48.28 129.54 6254.19 0.000 0.00 48.28 48.28 129.54 0.00 0.00 6254.19 6254.19 0.00
17 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paintof approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Volume 2 Page No. 46 Item No 8.30) m2 267.77 177.48 47523.82 0.000 0.00 267.77 267.77 177.48 0.00 0.00 47523.82 47523.82 0.00
18 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease,dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 8.45 54.06 456.81 0.000 0.00 8.45 8.45 54.06 0.00 0.00 456.81 456.81 0.00
19 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 8.45 140.76 1189.42 0.000 0.00 8.45 8.45 140.76 0.00 0.00 1189.42 1189.42 0.00
20 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.( Volume 2 Page No 47 Item No 8.33.3) m2 2.70 141.78 382.81 0.000 0.00 2.70 2.70 141.78 0.00 0.00 382.81 382.81 0.00
21 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. m2 728.62 833.34 607188.19 0.000 0.00 728.62 728.62 833.34 0.00 0.00 607188.19 607188.19 0.00
22 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. m3 22.06 2057.34 45384.92 0.000 0.00 22.06 22.06 2057.34 0.00 0.00 45384.92 45384.92 0.00
23 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. kg 250.00 138.72 34680.00 0.000 0.00 250.00 250.00 138.72 0.00 0.00 34680.00 34680.00 0.00
24 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. m2 34.89 579.36 20213.87 0.000 0.00 34.89 34.89 579.36 0.00 0.00 20213.87 20213.87 0.00
25 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.( Volume 2 Page No 104 Item No 12.51) Nos. 1.00 1035.30 1035.30 0.000 0.00 1.00 1.00 1035.3 0.00 0.00 1035.30 1035.30 0.00
26 Providing and fixing following fixtures to doors and windows. 0.000 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00
27 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) Each 6.00 173.40 1040.40 0.000 0.00 6.00 6.00 173.4 0.00 0.00 1040.40 1040.40 0.00
28 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No A-27 Sl.No 285 ) Each 4.00 50.00 200.00 0.000 0.00 4.00 4.00 50 0.00 0.00 200.00 200.00 0.00
29 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm Each 2.00 44.88 89.76 0.000 0.00 2.00 2.00 44.88 0.00 0.00 89.76 89.76 0.00
30 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 2.00 1073.04 2146.08 0.000 0.00 2.00 2.00 1073.04 0.00 0.00 2146.08 2146.08 0.00
31 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Nos 4.00 132.60 530.40 0.000 0.00 4.00 4.00 132.6 0.00 0.00 530.40 530.40 0.00
32 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Nos 2.00 122.40 244.80 0.000 0.00 2.00 2.00 122.4 0.00 0.00 244.80 244.80 0.00
1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 50 mm nominal dia Pipes m 20.00 781.00 15620.00 0.000 0.00 20.00 20.000 781 0.00 0.00 15620.00 15620.00 0.00
2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 40 mm nominal dia Pipes m 15.00 536.00 8040.00 0.000 0.00 15.00 15.000 536 0.00 0.00 8040.00 8040.00 0.00
3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 32 mm nominal dia Pipes m 140.00 400.00 56000.00 0.000 0.00 140.00 140.000 400 0.00 0.00 56000.00 56000.00 0.00
4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal dia Pipes m 120.00 318.00 38160.00 0.000 0.00 120.00 120.000 318 0.00 0.00 38160.00 38160.00 0.00
5 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.150mm nominal dia pipes m 100.00 768.00 76800.00 0.000 0.00 100.00 100.000 768 0.00 0.00 76800.00 76800.00 0.00
6 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.110mm nominal dia pipes m 100.00 385.00 38500.00 0.000 0.00 100.00 100.000 385 0.00 0.00 38500.00 38500.00 0.00
7 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.110mm nominal dia pipes m 80.00 289.00 23120.00 0.000 0.00 80.00 80.000 289 0.00 0.00 23120.00 23120.00 0.00
8 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. m 250.00 568.00 142000.00 0.000 0.00 250.00 250.000 568 0.00 0.00 142000.00 142000.00 0.00
9 Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 40 mm dia GM (Copper alloy) Gate valves Each 8.00 1500.00 12000.00 0.000 0.00 8.00 8.000 1500 0.00 0.00 12000.00 12000.00 0.00
10 Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 32 mm dia GM (Copper alloy) Gate valves Each 8.00 1338.00 10704.00 0.000 0.00 8.00 8.000 1338 0.00 0.00 10704.00 10704.00 0.00
11 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. No 47.00 725.00 34075.00 0.000 0.00 47.00 47.000 725 0.00 0.00 34075.00 34075.00 0.00
12 Providing and fixing brass bib cock of approved quality : 20 mm nominal bore No 47.00 305.00 14335.00 0.000 0.00 47.00 47.000 305 0.00 0.00 14335.00 14335.00 0.00
13 Providing and fixing Wall spout with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy No 13.00 1323.00 17199.00 0.000 0.00 13.00 13.000 1323 0.00 0.00 17199.00 17199.00 0.00
14 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150mm diameter No. 13.00 279.00 3627.00 0.000 0.00 13.00 13.000 279 0.00 0.00 3627.00 3627.00 0.00
15 Providing and fixing Wall Mixer Non Telephonic made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a)Economy No 13.00 3054.00 39702.00 0.000 0.00 13.00 13.000 3054 0.00 0.00 39702.00 39702.00 0.00
16 Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 g No 8.00 314.00 2512.00 0.000 0.00 8.00 8.000 314 0.00 0.00 2512.00 2512.00 0.00
17 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. m 10.00 313.00 3130.00 0.000 0.00 10.00 10.000 313 0.00 0.00 3130.00 3130.00 0.00
18 Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks Each 20.00 323.00 6460.00 0.000 0.00 20.00 20.000 323 0.00 0.00 6460.00 6460.00 0.00
19 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. L 10000.00 9.00 90000.00 0.000 0.00 10000.00 10000.000 9 0.00 0.00 90000.00 90000.00 0.00
20 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m m 114.75 484.00 55539.00 0.000 0.00 114.75 114.750 484 0.00 0.00 55539.00 55539.00 0.00
21 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications m³ 114.75 160.00 18360.00 0.000 0.00 114.75 114.750 160 0.00 0.00 18360.00 18360.00 0.00
22 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Each 5.00 4884.00 24420.00 0.000 0.00 5.00 5.000 4884 0.00 0.00 24420.00 24420.00 0.00
23 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 8.00 4838.00 38704.00 0.000 0.00 8.00 8.000 4838 0.00 0.00 38704.00 38704.00 0.00
24 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required, White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps Each 9.00 2866.00 25794.00 0.000 0.00 9.00 9.000 2866 0.00 0.00 25794.00 25794.00 0.00
25 Providing and fixing unplasticised PVC connection pipe with brass unions : 20 mm nominal bore No 9.00 110.00 990.00 0.000 0.00 9.00 9.000 110 0.00 0.00 990.00 990.00 0.00
26 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 4.00 4454.00 17816.00 0.000 0.00 4.00 4.000 4454 0.00 0.00 17816.00 17816.00 0.00
27 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 4.00 47.00 188.00 0.000 0.00 4.00 4.000 47 0.00 0.00 188.00 188.00 0.00
28 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors : * 100 mm inlet and 75 mm outlet * Hubless centrifugally cast (spun) iron epoxy coated inside & outside as perr IS : 15905 Each 36.00 475.00 17100.00 0.000 0.00 36.00 36.000 475 0.00 0.00 17100.00 17100.00 0.00
29 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. Each 15.00 5454.00 81810.00 0.000 0.00 15.00 15.000 5454 0.00 0.00 81810.00 81810.00 0.00
30 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm Each 10.00 1726.00 17260.00 0.000 0.00 10.00 10.000 1726 0.00 0.00 17260.00 17260.00 0.00
ELECTRICAL FOR BOYS HOSTEL
1 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 0.00 0.00 0.00
2 Supplying heavy gauge PVCConduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 0.00 0.00 0.00 0.00
3 Supplying And Fixing Metal Fan Box with Round Hook. no 72.00 117.00 8424.00 0.000 0.00 72.00 72.000 117 0.00 0.00 8424.00 8424.00 0.00
4 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. 0.00 0.00 0.00 0.00 0.00
Short point upto 3Mtr from tapping point to out let via switch box Point 96.00 269.00 25824.00 0.000 0.00 96.00 96.000 269 0.00 0.00 25824.00 25824.00 0.00
Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box Point 128.00 379.00 48512.00 0.000 0.00 128.00 128.000 379 0.00 0.00 48512.00 48512.00 0.00
Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box Point 225.00 555.00 124875.00 0.000 0.00 225.00 225.000 555 0.00 0.00 124875.00 124875.00 0.00
5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 0.00 0.00 0.00 0.00 0.00
6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 0.00 0.00 0.00 0.00 0.00
7 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 0.00 0.00 0.00 0.00 0.00
8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 0.00 0.00 0.00 0.00 0.00
9 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 0.00 0.00 0.00 0.00 0.00
10 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 0.00 0.00 0.00 0.00 0.00
11 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
12 Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 26.00 1492.00 38792.00 0.000 0.00 26.00 26.000 1492 0.00 0.00 38792.00 38792.00 0.00
13 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
14 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
17 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>1301m/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
18 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia no 6.00 3510.00 21060.00 0.000 0.00 6.00 6.000 3510 0.00 0.00 21060.00 21060.00 0.00
20 GI/Copper strips for grounding connections, using necessary fixing materials as required. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
21 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
22 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 72.00 171.00 12312.00 0.000 0.00 72.00 72.000 171 0.00 0.00 12312.00 12312.00 0.00
23 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Each 26.00 492.00 12792.00 0.000 0.00 26.00 26.000 492 0.00 0.00 12792.00 12792.00 0.00
24 Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
25 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 6 162 972 0.000 0.00 6.00 6.000 162 0.00 0.00 972.00 972.00 0.00
26 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
27 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
28 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. Each 1.00 9255.00 9255.00 0.000 0.00 1.00 1.000 9255 0.00 0.00 9255.00 9255.00 0.00
29 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy Each 1.00 9315.00 9315.00 0.000 0.00 1.00 1.000 9315 0.00 0.00 9315.00 9315.00 0.00
30 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. Each 1.00 5705.00 5705.00 0.000 0.00 1.00 1.000 5705 0.00 0.00 5705.00 5705.00 0.00
31 Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer Each 3.00 840.00 2520.00 0.000 0.00 3.00 3.000 840 0.00 0.00 2520.00 2520.00 0.00
32 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 6.00 515.00 3090.00 0.000 0.00 6.00 6.000 515 0.00 0.00 3090.00 3090.00 0.00
33 Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
34 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
35 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
UPS and Batteries 0.00
40 Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
41 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
Providing 4 Kg Fire Extinguisher Powder Based 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
42 Supply and installation of 4kg Stored Pressure Type, Pressure Guage, Gross Weight 7.4Kg, empty weight 3.4 Kg, Can Height 480 MM, Diameter 160 MM, Discharge Time less than 13 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, Can construction Deep drawn & Co., Mig welded, valve Construciton Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60 MM, IS 15683 and CE Approved 5 years warranty. with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor / MS brackets & accessories if it is fixing on wall,, labour, usage charges of machinery complete as per specifications. complete Each 6 3350 20100 0.000 0.00 6.00 6.000 3350 0.00 0.00 20100.00 20100.00 0.00
GROUND FLOOR FOR GIRLS HOSTEL 0.00
1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter includingdressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage ofmachinery & other appurtenances required to complete the work.In all kinds of soils upto 300 mm depth m³ 80.12 95.00 7611.40 80.12 0.00 0.00 80.12 95 7611.40 0.00 0.00 7611.40 0.00
2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m m³ 228.97 102.00 23354.94 228.97 0.00 0.00 228.97 102 23354.94 0.00 0.00 23354.94 0.00
3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.In ordinary/soft rock without blasting upto 1.5 m depth m³ 343.45 363.00 124673.08 343.45 0.00 0.00 343.45 363 124673.08 0.00 0.00 124673.08 0.00
4 Providing and laying in position Cement Concrete for levelling course for all works in foundation.The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. m³ 138.84 5918.00 821655.12 138.84 0.00 0.00 138.84 5918 821655.12 0.00 0.00 821655.12 0.00
5 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 145.29 6725.16 977076.81 145.29 0.00 0.00 145.29 6725.16 977076.81 0.00 0.00 977076.81 0.00
6 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 10.90 10585.90 115382.08 10.90 0.00 0.00 10.90 10585.9 115382.08 0.00 0.00 115382.08 0.00
7 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) m3 76.84 6594.00 506715.02 76.84 0.00 0.00 76.84 6594 506715.02 0.00 0.00 506715.02 0.00
8 Providing ruled pointing to cursed stone masonry with lime mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost all materials, labour, usage charges of achinery, curing complete as pre specification. m2 32.50 255.00 8287.50 32.50 0.00 0.00 32.50 255 8287.50 0.00 0.00 8287.50 0.00
9 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 29.22 9340.50 272929.41 29.22 0.00 0.00 29.22 9340.5 272929.41 0.00 0.00 272929.41 0.00
10 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 17.39 11447.80 199031.45 17.39 0.00 0.00 17.39 11447.8 199031.45 0.00 0.00 199031.45 0.00
11 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 35.69 10774.40 384538.34 35.69 0.00 0.00 35.69 10774.4 384538.34 0.00 0.00 384538.34 0.00
12 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 82.57 10101.00 834064.82 82.57 0.00 0.00 82.57 10101 834064.82 0.00 0.00 834064.82 0.00
13 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. m3 228.97 266.00 60906.02 228.97 0.00 0.00 228.97 266 60906.02 0.00 0.00 60906.02 0.00
14 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. m3 856.35 474.00 405908.19 856.35 0.00 0.00 856.35 474 405908.19 0.00 0.00 405908.19 0.00
15 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier underand around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along theexternal perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. m2 531.36 118.00 62700.48 531.36 0.00 0.00 531.36 118 62700.48 0.00 0.00 62700.48 0.00
16 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 102.75 7948.00 816657.00 102.75 0.00 0.00 102.75 7948 816657.00 0.00 0.00 816657.00 0.00
17 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m2 158.72 1029.00 163322.88 158.72 0.00 0.00 158.72 1029 163322.88 0.00 0.00 163322.88 0.00
18 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specificationsM25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 7.75 9764.30 75673.33 7.75 0.00 0.00 7.75 9764.3 75673.33 0.00 0.00 75673.33 0.00
19 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.12 138074.00 16568.88 0.12 0.00 0.00 0.12 138074 16568.88 0.00 0.00 16568.88 0.00
20 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.48 98815.00 47431.20 0.48 0.00 0.00 0.48 98815 47431.20 0.00 0.00 47431.20 0.00
21 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section m 60.10 239.00 14363.90 60.10 0.00 0.00 60.10 239 14363.90 0.00 0.00 14363.90 0.00
22 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. m2 4.50 7085.00 31882.50 4.50 0.00 0.00 4.50 7085 31882.50 0.00 0.00 31882.50 0.00
23 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyderesin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 30 mm thick Both side teak m2 32.50 4043.00 131397.50 32.50 0.00 0.00 32.50 4043 131397.50 0.00 0.00 131397.50 0.00
24 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness m2 20.37 3485.00 70989.45 20.37 0.00 0.00 20.37 3485 70989.45 0.00 0.00 70989.45 0.00
25 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 2948.70 183.00 539612.10 2948.70 0.00 0.00 2948.70 183 539612.10 0.00 0.00 539612.10 0.00
26 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 63.75 6734.00 429292.50 63.75 0.00 0.00 63.75 6734 429292.50 0.00 0.00 429292.50 0.00
27 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass.Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 23.94 5719.00 136912.86 23.94 0.00 0.00 23.94 5719 136912.86 0.00 0.00 136912.86 0.00
28 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 63.75 687.00 43796.25 63.75 0.00 0.00 63.75 687 43796.25 0.00 0.00 43796.25 0.00
29 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 4.50 8276.00 37242.00 4.50 0.00 0.00 4.50 8276 37242.00 0.00 0.00 37242.00 0.00
30 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 248.70 565.00 140515.50 248.70 0.00 0.00 248.70 565 140515.50 0.00 0.00 140515.50 0.00
31 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 1425.58 253.00 360671.74 1425.58 0.00 0.00 1425.58 253 360671.74 0.00 0.00 360671.74 0.00
32 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 2016.75 100.00 201675.00 2016.75 0.00 0.00 2016.75 100 201675.00 0.00 0.00 201675.00 0.00
33 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 551.19 347.00 191262.93 551.19 0.00 0.00 551.19 347 191262.93 0.00 0.00 191262.93 0.00
34 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 83.00 64.00 5312.00 83.00 0.00 0.00 83.00 64 5312.00 0.00 0.00 5312.00 0.00
35 Polymerized plaster reinforced with glass fibre mesh m2 315.00 317.00 99855.00 315.00 0.00 0.00 315.00 317 99855.00 0.00 0.00 99855.00 0.00
36 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. m2 13.48 1229.00 16560.78 13.48 0.00 0.00 13.48 1229 16560.78 0.00 0.00 16560.78 0.00
37 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ( Volume 1 Page No 18 Item No 2.11.a) t 32.58 90464.00 2947317.12 32.58 0.00 0.00 32.58 90464 2947317.12 0.00 0.00 2947317.12 0.00
38 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile Size of Tile 600x600 mm m2 360.73 1171.00 422414.83 0.00 360.73 0.00 360.73 1171 0.00 422414.83 0.00 422414.83 0.00
39 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. m2 144.01 2848.00 410140.48 0.00 144.01 0.00 144.01 2848 0.00 410140.48 0.00 410140.48 0.00
40 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m2 58.80 885.00 52038.00 0.00 58.80 0.00 58.80 885 0.00 52038.00 0.00 52038.00 0.00
41 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. m2 49.75 5326.00 264968.50 0.00 49.75 0.00 49.75 5326 0.00 264968.50 0.00 264968.50 0.00
42 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m2 103.02 1446.00 148966.92 0.00 103.02 0.00 103.02 1446 0.00 148966.92 0.00 148966.92 0.00
43 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. m2 2.16 2085.00 4503.60 0.00 2.16 0.00 2.16 2085 0.00 4503.60 0.00 4503.60 0.00
44 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 2016.75 127.00 256127.25 0.00 2016.75 0.00 2016.75 127 0.00 256127.25 0.00 256127.25 0.00
45 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 551.19 174.00 95907.06 0.00 551.19 0.00 551.19 174 0.00 95907.06 0.00 95907.06 0.00
46 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 96.87 53.00 5288.13 0.00 96.87 0.00 96.87 53 0.00 5288.13 0.00 5288.13 0.00
47 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge m2 96.20 135.00 12987.00 0.00 96.20 0.00 96.20 135 0.00 12987.00 0.00 12987.00 0.00
48 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 96.87 139.00 13464.93 0.00 96.87 0.00 96.87 139 0.00 13464.93 0.00 13464.93 0.00
49 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos. 12.00 1015.00 12180.00 0.00 12.00 0.00 12.00 1015 0.00 12180.00 0.00 12180.00 0.00
50 Providing and fixing following fixtures to doors and windows. 0.00 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00
51 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type)(Volume 2 Page No 176 Item No. 20.34.1) Each 62.00 170.00 10540.00 0.00 62.00 0.00 62.00 170 0.00 10540.00 0.00 10540.00 0.00
52 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No A-27 Sl.No 285 ) Each 48.00 50.00 2400.00 0.00 48.00 0.00 48.00 50 0.00 2400.00 0.00 2400.00 0.00
53 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm(Volume 2 Page No 108 Item No. 12.73.1) Each 24.00 44.00 1056.00 0.00 24.00 0.00 24.00 44 0.00 1056.00 0.00 1056.00 0.00
54 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (Volume 2 Page No 107 Item No. 12.60 ) Each 24.00 1052.00 25248.00 0.00 24.00 0.00 24.00 1052 0.00 25248.00 0.00 25248.00 0.00
55 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete (Volume 2 Page No 107 Item No. 12.63) Nos 40.00 130.00 5200.00 0.00 40.00 0.00 40.00 130 0.00 5200.00 0.00 5200.00 0.00
56 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (Volume 2 Page No 107 Item No. 12.58) Nos 12.00 120.00 1440.00 0.00 12.00 0.00 12.00 120 0.00 1440.00 0.00 1440.00 0.00
FIRST FLOOR FOR GIRLS HOSTEL 0.00
1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 17.37 11562.28 200836.77 0.00 17.37 0.00 17.37 11562.278 0.00 200836.77 0.00 200836.77 0.00
2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 35.27 10882.14 383813.22 0.00 35.27 0.00 35.27 10882.144 0.00 383813.22 0.00 383813.22 0.00
3 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 78.61 10202.01 801961.23 0.00 78.61 0.00 78.61 10202.01 0.00 801961.23 0.00 801961.23 0.00
4 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 108.29 8027.48 869295.81 0.00 108.29 0.00 108.29 8027.48 0.00 869295.81 0.00 869295.81 0.00
5 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m2 135.89 1039.29 141229.12 0.00 135.89 0.00 135.89 1039.29 0.00 141229.12 0.00 141229.12 0.00
6 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specificationsM25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 10.79 9861.94 106410.36 0.00 10.79 0.00 10.79 9861.943 0.00 106410.36 0.00 106410.36 0.00
7 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.63 99803.15 62875.98 0.00 0.63 0.00 0.63 99803.15 0.00 62875.98 0.00 62875.98 0.00
8 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section m 60.00 241.39 14483.40 0.00 60.00 0.00 60.00 241.39 0.00 14483.40 0.00 14483.40 0.00
9 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyderesin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 30 mm thick Both side teak m2 34.25 4083.43 139857.48 0.00 34.25 0.00 34.25 4083.43 0.00 139857.48 0.00 139857.48 0.00
10 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness m2 20.16 3519.85 70960.18 0.00 20.16 0.00 20.16 3519.85 0.00 70960.18 0.00 70960.18 0.00
11 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 2745.00 184.83 507358.35 0.00 2745.00 0.00 2745.00 184.83 0.00 507358.35 0.00 507358.35 0.00
12 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 60.60 6801.34 412161.20 0.00 60.60 0.00 60.60 6801.34 0.00 412161.20 0.00 412161.20 0.00
13 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass.Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 30.90 5776.19 178484.27 0.00 30.90 0.00 30.90 5776.19 0.00 178484.27 0.00 178484.27 0.00
14 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 92.04 570.65 52522.63 0.00 92.04 0.00 92.04 570.65 0.00 52522.63 0.00 52522.63 0.00
15 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 1305.14 255.53 333502.42 0.00 1305.14 0.00 1305.14 255.53 0.00 333502.42 0.00 333502.42 0.00
16 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 1604.75 101.00 162079.75 0.00 1604.75 0.00 1604.75 101 0.00 162079.75 0.00 162079.75 0.00
17 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 617.51 350.47 216418.73 0.00 617.51 0.00 617.51 350.47 0.00 216418.73 0.00 216418.73 0.00
18 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 93.00 64.64 6011.52 0.00 93.00 0.00 93.00 64.64 0.00 6011.52 0.00 6011.52 0.00
19 Polymerized plaster reinforced with glass fibre mesh m2 315.00 320.17 100853.55 0.00 315.00 0.00 315.00 320.17 0.00 100853.55 0.00 100853.55 0.00
20 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification t 18.20 91368.64 1662829.69 0.00 18.20 0.00 18.20 91368.64 0.00 1662829.69 0.00 1662829.69 0.00
21 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile Size of Tile 600x600 mm m2 373.43 1182.71 441659.40 0.00 0.00 373.43 373.43 1182.71 0.00 0.00 441659.40 441659.40 0.00
22 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. m2 90.15 2876.48 259314.67 0.00 0.00 90.15 90.15 2876.48 0.00 0.00 259314.67 259314.67 0.00
23 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m2 53.40 893.85 47731.59 0.00 0.00 53.40 53.40 893.85 0.00 0.00 47731.59 47731.59 0.00
24 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. m2 23.66 5379.26 127273.29 0.00 0.00 23.66 23.66 5379.26 0.00 0.00 127273.29 127273.29 0.00
25 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m2 180.18 1460.46 263145.68 0.00 0.00 180.18 180.18 1460.46 0.00 0.00 263145.68 263145.68 0.00
26 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. m2 2.16 2105.85 4548.64 0.00 0.00 2.16 2.16 2105.85 0.00 0.00 4548.64 4548.64 0.00
27 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 1604.75 128.27 205841.28 0.00 0.00 1604.75 1604.75 128.27 0.00 0.00 205841.28 205841.28 0.00
28 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge m2 617.51 175.74 108521.21 0.00 0.00 617.51 617.51 175.74 0.00 0.00 108521.21 108521.21 0.00
29 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease,dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 91.20 53.53 4881.94 0.00 0.00 91.20 91.20 53.53 0.00 0.00 4881.94 4881.94 0.00
30 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge m2 88.72 136.35 12096.97 0.00 0.00 88.72 88.72 136.35 0.00 0.00 12096.97 12096.97 0.00
31 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.( Volume 2 Page No 47 Item No 8.33.3) m2 91.20 140.39 12803.57 0.00 0.00 91.20 91.20 140.39 0.00 0.00 12803.57 12803.57 0.00
32 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. m3 22.06 2037.17 44939.97 0.00 0.00 22.06 22.06 2037.17 0.00 0.00 44939.97 44939.97 0.00
33 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. m2 93.40 825.17 77070.88 0.00 0.00 93.40 93.40 825.17 0.00 0.00 77070.88 77070.88 0.00
34 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.( Volume 2 Page No 104 Item No 12.51) Nos. 11.00 1025.15 11276.65 0.00 0.00 11.00 11.00 1025.15 0.00 0.00 11276.65 11276.65 0.00
35 Providing and fixing following fixtures to doors and windows. 0.00 0.00 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00
36 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) Each 60.00 171.70 10302.00 0.00 0.00 60.00 60.00 171.7 0.00 0.00 10302.00 10302.00 0.00
37 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No A-27 Sl.No 285 ) Each 44.00 50.00 2200.00 0.00 0.00 44.00 44.00 50 0.00 0.00 2200.00 2200.00 0.00
38 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm Each 22.00 44.44 977.68 0.00 0.00 22.00 22.00 44.44 0.00 0.00 977.68 977.68 0.00
39 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 22.00 1062.52 23375.44 0.00 0.00 22.00 22.00 1062.52 0.00 0.00 23375.44 23375.44 0.00
40 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Nos 40.00 131.30 5252.00 0.00 0.00 40.00 40.00 131.3 0.00 0.00 5252.00 5252.00 0.00
41 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Nos 20.00 121.20 2424.00 0.00 0.00 20.00 20.00 121.2 0.00 0.00 2424.00 2424.00 0.00
TERRECE FLOOR FOR GIRLS HOSTEL 0.00
1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 1.90 11676.76 22185.84 0.000 1.90 0.00 1.900 11676.756 0.00 22185.84 0.00 22185.84 0.00
2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates m³ 4.32 10658.90 46046.44 0.000 4.32 0.00 4.32 10658.898 0.00 46046.44 0.00 46046.44 0.00
3 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 3.31 10989.89 36376.53 0.000 3.31 0.00 3.31 10989.888 0.00 36376.53 0.00 36376.53 0.00
4 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 28.54 8106.96 231372.64 0.000 28.54 0.00 28.54 8106.96 0.00 231372.64 0.00 231372.64 0.00
5 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 0.25 9959.59 2489.90 0.000 0.25 0.00 0.25 9959.586 0.00 2489.90 0.00 2489.90 0.00
6 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.05 100791.30 5039.56 0.000 0.05 0.00 0.05 100791.3 0.00 5039.56 0.00 5039.56 0.00
7 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) m2 3.25 7226.70 23486.78 0.000 3.25 0.00 3.25 7226.7 0.00 23486.78 0.00 23486.78 0.00
8 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 81.00 186.66 15119.46 0.000 81.00 0.00 81.00 186.66 0.00 15119.46 0.00 15119.46 0.00
9 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 2.70 6868.68 18545.44 0.000 2.70 0.00 2.70 6868.68 0.00 18545.44 0.00 18545.44 0.00
10 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 48.28 258.06 12459.14 0.000 48.28 0.00 48.28 258.06 0.00 12459.14 0.00 12459.14 0.00
11 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 48.28 102.00 4924.56 0.000 48.28 0.00 48.28 102 0.00 4924.56 0.00 4924.56 0.00
12 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 267.77 353.94 94774.51 0.000 267.77 0.00 267.77 353.94 0.00 94774.51 0.00 94774.51 0.00
13 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 40.00 65.28 2611.20 0.000 40.00 0.00 40.00 65.28 0.00 2611.20 0.00 2611.20 0.00
14 Polymerized plaster reinforced with glass fibre mesh m2 18.00 323.34 5820.12 0.000 18.00 0.00 18.00 323.34 0.00 5820.12 0.00 5820.12 0.00
15 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification t 1.55 92273.28 143023.58 0.000 1.55 0.00 1.55 92273.28 0.00 143023.58 0.00 143023.58 0.00
16 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 48.28 129.54 6254.19 0.000 0.00 48.28 48.28 129.54 0.00 0.00 6254.19 6254.19 0.00
17 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paintof approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Volume 2 Page No. 46 Item No 8.30) m2 267.77 177.48 47523.82 0.000 0.00 267.77 267.77 177.48 0.00 0.00 47523.82 47523.82 0.00
18 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease,dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 8.45 54.06 456.81 0.000 0.00 8.45 8.45 54.06 0.00 0.00 456.81 456.81 0.00
19 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 8.45 140.76 1189.42 0.000 0.00 8.45 8.45 140.76 0.00 0.00 1189.42 1189.42 0.00
20 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.( Volume 2 Page No 47 Item No 8.33.3) m2 2.70 141.78 382.81 0.000 0.00 2.70 2.70 141.78 0.00 0.00 382.81 382.81 0.00
21 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. m2 728.62 833.34 607188.19 0.000 0.00 728.62 728.62 833.34 0.00 0.00 607188.19 607188.19 0.00
22 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. m3 22.06 2057.34 45384.92 0.000 0.00 22.06 22.06 2057.34 0.00 0.00 45384.92 45384.92 0.00
23 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. kg 250.00 138.72 34680.00 0.000 0.00 250.00 250.00 138.72 0.00 0.00 34680.00 34680.00 0.00
24 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. m2 34.89 579.36 20213.87 0.000 0.00 34.89 34.89 579.36 0.00 0.00 20213.87 20213.87 0.00
25 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.( Volume 2 Page No 104 Item No 12.51) Nos. 1.00 1035.30 1035.30 0.000 0.00 1.00 1.00 1035.3 0.00 0.00 1035.30 1035.30 0.00
26 Providing and fixing following fixtures to doors and windows. 0.000 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00
27 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) Each 6.00 173.40 1040.40 0.000 0.00 6.00 6.00 173.4 0.00 0.00 1040.40 1040.40 0.00
28 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No A-27 Sl.No 285 ) Each 4.00 50.00 200.00 0.000 0.00 4.00 4.00 50 0.00 0.00 200.00 200.00 0.00
29 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm Each 2.00 44.88 89.76 0.000 0.00 2.00 2.00 44.88 0.00 0.00 89.76 89.76 0.00
30 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 2.00 1073.04 2146.08 0.000 0.00 2.00 2.00 1073.04 0.00 0.00 2146.08 2146.08 0.00
31 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Nos 4.00 132.60 530.40 0.000 0.00 4.00 4.00 132.6 0.00 0.00 530.40 530.40 0.00
32 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Nos 2.00 122.40 244.80 0.000 0.00 2.00 2.00 122.4 0.00 0.00 244.80 244.80 0.00
WATER SUPPLY FOR GIRLS HOSTEL 0.00
1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 50 mm nominal dia Pipes m 20.00 781.00 15620.00 0.000 0.00 20.00 20.000 781 0.00 0.00 15620.00 15620.00 0.00
2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 40 mm nominal dia Pipes m 15.00 536.00 8040.00 0.000 0.00 15.00 15.000 536 0.00 0.00 8040.00 8040.00 0.00
3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 32 mm nominal dia Pipes m 140.00 400.00 56000.00 0.000 0.00 140.00 140.000 400 0.00 0.00 56000.00 56000.00 0.00
4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal dia Pipes m 120.00 318.00 38160.00 0.000 0.00 120.00 120.000 318 0.00 0.00 38160.00 38160.00 0.00
5 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.150mm nominal dia pipes m 100.00 768.00 76800.00 0.000 0.00 100.00 100.000 768 0.00 0.00 76800.00 76800.00 0.00
6 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.110mm nominal dia pipes m 100.00 385.00 38500.00 0.000 0.00 100.00 100.000 385 0.00 0.00 38500.00 38500.00 0.00
7 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.110mm nominal dia pipes m 80.00 289.00 23120.00 0.000 0.00 80.00 80.000 289 0.00 0.00 23120.00 23120.00 0.00
8 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. m 250.00 568.00 142000.00 0.000 0.00 250.00 250.000 568 0.00 0.00 142000.00 142000.00 0.00
9 Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 40 mm dia GM (Copper alloy) Gate valves Each 8.00 1500.00 12000.00 0.000 0.00 8.00 8.000 1500 0.00 0.00 12000.00 12000.00 0.00
10 Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 32 mm dia GM (Copper alloy) Gate valves Each 8.00 1338.00 10704.00 0.000 0.00 8.00 8.000 1338 0.00 0.00 10704.00 10704.00 0.00
11 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. No 47.00 725.00 34075.00 0.000 0.00 47.00 47.000 725 0.00 0.00 34075.00 34075.00 0.00
12 Providing and fixing brass bib cock of approved quality : 20 mm nominal bore No 47.00 305.00 14335.00 0.000 0.00 47.00 47.000 305 0.00 0.00 14335.00 14335.00 0.00
13 Providing and fixing Wall spout with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy No 13.00 1323.00 17199.00 0.000 0.00 13.00 13.000 1323 0.00 0.00 17199.00 17199.00 0.00
14 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150mm diameter No. 13.00 279.00 3627.00 0.000 0.00 13.00 13.000 279 0.00 0.00 3627.00 3627.00 0.00
15 Providing and fixing Wall Mixer Non Telephonic made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a)Economy No 13.00 3054.00 39702.00 0.000 0.00 13.00 13.000 3054 0.00 0.00 39702.00 39702.00 0.00
16 Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 g No 8.00 314.00 2512.00 0.000 0.00 8.00 8.000 314 0.00 0.00 2512.00 2512.00 0.00
17 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. m 10.00 313.00 3130.00 0.000 0.00 10.00 10.000 313 0.00 0.00 3130.00 3130.00 0.00
18 Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks Each 20.00 323.00 6460.00 0.000 0.00 20.00 20.000 323 0.00 0.00 6460.00 6460.00 0.00
19 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. L 10000.00 9.00 90000.00 0.000 0.00 10000.00 10000.000 9 0.00 0.00 90000.00 90000.00 0.00
20 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m m 114.75 484.00 55539.00 0.000 0.00 114.75 114.750 484 0.00 0.00 55539.00 55539.00 0.00
21 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications m³ 114.75 160.00 18360.00 0.000 0.00 114.75 114.750 160 0.00 0.00 18360.00 18360.00 0.00
22 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Each 5.00 4884.00 24420.00 0.000 0.00 5.00 5.000 4884 0.00 0.00 24420.00 24420.00 0.00
23 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 8.00 4838.00 38704.00 0.000 0.00 8.00 8.000 4838 0.00 0.00 38704.00 38704.00 0.00
24 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required, White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps Each 9.00 2866.00 25794.00 0.000 0.00 9.00 9.000 2866 0.00 0.00 25794.00 25794.00 0.00
25 Providing and fixing unplasticised PVC connection pipe with brass unions : 20 mm nominal bore No 9.00 110.00 990.00 0.000 0.00 9.00 9.000 110 0.00 0.00 990.00 990.00 0.00
26 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 4.00 47.00 188.00 0.000 0.00 4.00 4.000 47 0.00 0.00 188.00 188.00 0.00
27 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors : * 100 mm inlet and 75 mm outlet * Hubless centrifugally cast (spun) iron epoxy coated inside & outside as perr IS : 15905 Each 36.00 475.00 17100.00 0.000 0.00 36.00 36.000 475 0.00 0.00 17100.00 17100.00 0.00
28 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. Each 15.00 5454.00 81810.00 0.000 0.00 15.00 15.000 5454 0.00 0.00 81810.00 81810.00 0.00
29 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm Each 10.00 1726.00 17260.00 0.000 0.00 10.00 10.000 1726 0.00 0.00 17260.00 17260.00 0.00
ELECTRICAL FOR GIRLS HOSTEL 0.00
1 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 0.00 0.00 0.00 0.00
2 Supplying heavy gauge PVCConduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 0.00 0.00 0.00 0.00
3 Supplying And Fixing Metal Fan Box with Round Hook. no 72.00 117.00 8424.00 0.000 0.00 72.00 72.000 117 0.00 0.00 8424.00 8424.00 0.00
4 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. 0.00 0.00 0.00 0.00 0.00
Short point upto 3Mtr from tapping point to out let via switch box Point 96.00 269.00 25824.00 0.000 0.00 96.00 96.000 269 0.00 0.00 25824.00 25824.00 0.00
Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box Point 128.00 379.00 48512.00 0.000 0.00 128.00 128.000 379 0.00 0.00 48512.00 48512.00 0.00
Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box Point 225.00 555.00 124875.00 0.000 0.00 225.00 225.000 555 0.00 0.00 124875.00 124875.00 0.00
5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 0.00 0.00 0.00 0.00 0.00
6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 0.00 0.00 0.00 0.00 0.00
7 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 0.00 0.00 0.00 0.00 0.00
8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 0.00 0.00 0.00 0.00 0.00
9 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 0.00 0.00 0.00 0.00 0.00
10 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 0.00 0.00 0.00 0.00 0.00
11 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
12 Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 26.00 1492.00 38792.00 0.000 0.00 26.00 26.000 1492 0.00 0.00 38792.00 38792.00 0.00
13 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
14 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
17 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>1301m/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
18 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia no 6.00 3510.00 21060.00 0.000 0.00 6.00 6.000 3510 0.00 0.00 21060.00 21060.00 0.00
20 GI/Copper strips for grounding connections, using necessary fixing materials as required. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
21 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
22 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 72.00 171.00 12312.00 0.000 0.00 72.00 72.000 171 0.00 0.00 12312.00 12312.00 0.00
23 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Each 26.00 492.00 12792.00 0.000 0.00 26.00 26.000 492 0.00 0.00 12792.00 12792.00 0.00
24 Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
25 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 6 162 972 0.000 0.00 6.00 6.000 162 0.00 0.00 972.00 972.00 0.00
26 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
27 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
28 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. Each 1.00 9255.00 9255.00 0.000 0.00 1.00 1.000 9255 0.00 0.00 9255.00 9255.00 0.00
29 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy Each 1.00 9315.00 9315.00 0.000 0.00 1.00 1.000 9315 0.00 0.00 9315.00 9315.00 0.00
30 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. Each 1.00 5705.00 5705.00 0.000 0.00 1.00 1.000 5705 0.00 0.00 5705.00 5705.00 0.00
31 Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer Each 3.00 840.00 2520.00 0.000 0.00 3.00 3.000 840 0.00 0.00 2520.00 2520.00 0.00
32 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 6.00 515.00 3090.00 0.000 0.00 6.00 6.000 515 0.00 0.00 3090.00 3090.00 0.00
33 Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
34 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
35 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
UPS and Batteries 0.00
40 Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
41 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
Providing 4 Kg Fire Extinguisher Powder Based 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
42 Supply and installation of 4kg Stored Pressure Type, Pressure Guage, Gross Weight 7.4Kg, empty weight 3.4 Kg, Can Height 480 MM, Diameter 160 MM, Discharge Time less than 13 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, Can construction Deep drawn & Co., Mig welded, valve Construciton Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60 MM, IS 15683 and CE Approved 5 years warranty. with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor / MS brackets & accessories if it is fixing on wall,, labour, usage charges of machinery complete as per specifications. complete Each 6 3350 20100 0.000 0.00 6.00 6.000 3350 0.00 0.00 20100.00 20100.00 0.00
STAFF QUARTERS GROUND FLOOR 0.00
1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter includingdressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage ofmachinery & other appurtenances required to complete the work.In all kinds of soils upto 300 mm depth m³ 80.95 95.00 7690.25 80.95 0.00 0.00 80.95 95 7690.25 0.00 0.00 7690.25 0.00
2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m m³ 264.54 102.00 26982.67 264.54 0.00 0.00 264.54 102 26982.67 0.00 0.00 26982.67 0.00
3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.In ordinary/soft rock without blasting upto 1.5 m depth m³ 396.80 363.00 144039.85 396.80 0.00 0.00 396.80 363 144039.85 0.00 0.00 144039.85 0.00
4 Providing and laying in position Cement Concrete for levelling course for all works in foundation.The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. m³ 124.85 5918.00 738862.30 124.85 0.00 0.00 124.85 5918 738862.30 0.00 0.00 738862.30 0.00
5 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 151.56 6725.16 1019265.25 151.56 0.00 0.00 151.56 6725.16 1019265.25 0.00 0.00 1019265.25 0.00
6 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 9.39 10585.90 99401.60 9.39 0.00 0.00 9.39 10585.9 99401.60 0.00 0.00 99401.60 0.00
7 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) m3 128.94 6594.00 850230.36 128.94 0.00 0.00 128.94 6594 850230.36 0.00 0.00 850230.36 0.00
8 Providing ruled pointing to cursed stone masonry with lime mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost all materials, labour, usage charges of achinery, curing complete as pre specification. m2 80.89 255.00 20626.95 80.89 0.00 0.00 80.89 255 20626.95 0.00 0.00 20626.95 0.00
9 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 25.51 9340.50 238234.38 25.51 0.00 0.00 25.51 9340.5 238234.38 0.00 0.00 238234.38 0.00
10 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 15.97 11447.80 182821.37 15.97 0.00 0.00 15.97 11447.8 182821.37 0.00 0.00 182821.37 0.00
11 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 31.63 10774.40 340794.27 31.63 0.00 0.00 31.63 10774.4 340794.27 0.00 0.00 340794.27 0.00
12 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 59.53 10101.00 601373.14 59.53 0.00 0.00 59.53 10101 601373.14 0.00 0.00 601373.14 0.00
13 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. m3 264.54 266.00 70366.58 264.54 0.00 0.00 264.54 266 70366.58 0.00 0.00 70366.58 0.00
14 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. m3 629.53 474.00 298397.30 629.53 0.00 0.00 629.53 474 298397.30 0.00 0.00 298397.30 0.00
15 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier underand around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along theexternal perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. m2 361.44 118.00 42649.92 361.44 0.00 0.00 361.44 118 42649.92 0.00 0.00 42649.92 0.00
16 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 112.14 7948.00 891288.72 112.14 0.00 0.00 112.14 7948 891288.72 0.00 0.00 891288.72 0.00
17 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m2 165.99 1029.00 170803.71 165.99 0.00 0.00 165.99 1029 170803.71 0.00 0.00 170803.71 0.00
18 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specificationsM25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 3.19 9764.30 31148.12 3.19 0.00 0.00 3.19 9764.3 31148.12 0.00 0.00 31148.12 0.00
19 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.34 138074.00 46945.16 0.00 0.00 0.34 0.34 138074 0.00 0.00 46945.16 46945.16 0.00
20 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.47 98815.00 46443.05 0.00 0.00 0.47 0.47 98815 0.00 0.00 46443.05 46443.05 0.00
21 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section m 40.00 239.00 9560.00 0.00 0.00 40.00 40.00 239 0.00 0.00 9560.00 9560.00 0.00
22 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. m2 8.82 7085.00 62489.70 0.00 0.00 8.82 8.82 7085 0.00 0.00 62489.70 62489.70 0.00
23 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyderesin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 30 mm thick Both side teak m2 22.68 4043.00 91695.24 0.00 0.00 22.68 22.68 4043 0.00 0.00 91695.24 91695.24 0.00
24 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness m2 13.44 3485.00 46838.40 0.00 0.00 13.44 13.44 3485 0.00 0.00 46838.40 46838.40 0.00
25 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 1484.40 183.00 271645.20 0.00 0.00 1484.40 1484.40 183 0.00 0.00 271645.20 271645.20 0.00
26 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 37.03 6734.00 249360.02 0.00 0.00 37.03 37.03 6734 0.00 0.00 249360.02 249360.02 0.00
27 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass.Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 4.80 5719.00 27451.20 0.00 0.00 4.80 4.80 5719 0.00 0.00 27451.20 27451.20 0.00
28 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 286.26 565.00 161736.90 0.00 0.00 286.26 286.26 565 0.00 0.00 161736.90 161736.90 0.00
29 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 1190.31 253.00 301148.43 0.00 0.00 1190.31 1190.31 253 0.00 0.00 301148.43 301148.43 0.00
30 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 1635.74 100.00 163574.00 0.00 0.00 1635.74 1635.74 100 0.00 0.00 163574.00 163574.00 0.00
31 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 723.18 347.00 250943.46 0.00 0.00 723.18 723.18 347 0.00 0.00 250943.46 250943.46 0.00
32 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 108.00 64.00 6912.00 0.00 0.00 108.00 108.00 64 0.00 0.00 6912.00 6912.00 0.00
33 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 150.00 317.00 47550.00 0.00 0.00 150.00 150.00 317 0.00 0.00 47550.00 47550.00 0.00
34 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 21.81 1229.00 26804.49 0.00 0.00 21.81 21.81 1229 0.00 0.00 26804.49 26804.49 0.00
35 Polymerized plaster reinforced with glass fibre mesh m2 29.31 90464.00 2651499.84 0.00 0.00 29.31 29.31 90464 0.00 0.00 2651499.84 2651499.84 0.00
36 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. m2 286.50 1171.00 335491.50 0.00 0.00 286.50 286.50 1171 0.00 0.00 335491.50 335491.50 0.00
37 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ( Volume 1 Page No 18 Item No 2.11.a) t 81.35 2848.00 231684.80 0.00 0.00 81.35 81.35 2848 0.00 0.00 231684.80 231684.80 0.00
38 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile Size of Tile 600x1200 mm m2 26.28 885.00 23257.80 0.00 0.00 26.28 26.28 885 0.00 0.00 23257.80 23257.80 0.00
39 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. m2 64.40 5326.00 342994.40 0.00 0.00 64.40 64.40 5326 0.00 0.00 342994.40 342994.40 0.00
40 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m2 136.46 1446.00 197321.16 0.00 0.00 136.46 136.46 1446 0.00 0.00 197321.16 197321.16 0.00
41 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. m2 1635.74 127.00 207738.98 0.00 0.00 1635.74 1635.74 127 0.00 0.00 207738.98 207738.98 0.00
42 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m2 723.18 174.00 125833.32 0.00 0.00 723.18 723.18 174 0.00 0.00 125833.32 125833.32 0.00
43 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 131.37 53.00 6962.61 0.00 0.00 131.37 131.37 53 0.00 0.00 6962.61 6962.61 0.00
44 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paintof approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 81.89 135.00 11055.15 0.00 0.00 81.89 81.89 135 0.00 0.00 11055.15 11055.15 0.00
45 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease,dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 16.00 1015.00 16240.00 0.00 0.00 16.00 16.00 1015 0.00 0.00 16240.00 16240.00 0.00
46 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge m2 48.00 170.00 8160.00 0.00 0.00 48.00 48.00 170 0.00 0.00 8160.00 8160.00 0.00
47 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.( Volume 2 Page No 104 Item No 12.51) Nos. 48.00 50.00 2400.00 0.00 0.00 48.00 48.00 50 0.00 0.00 2400.00 2400.00 0.00
48 Providing and fixing following fixtures to doors and windows. 32.00 44.00 1408.00 0.00 0.00 32.00 32.00 44 0.00 0.00 1408.00 1408.00 0.00
49 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type)(Volume 2 Page No 176 Item No. 20.34.1) Each 32.00 1052.00 33664.00 0.00 0.00 32.00 32.00 1052 0.00 0.00 33664.00 33664.00 0.00
50 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No A-27 Sl.No 285 ) Each 16.00 130.00 2080.00 0.00 0.00 16.00 16.00 130 0.00 0.00 2080.00 2080.00 0.00
51 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm(Volume 2 Page No 108 Item No. 12.73.1) Each 16.00 120.00 1920.00 0.00 0.00 16.00 16.00 120 0.00 0.00 1920.00 1920.00 0.00
STAFF QUARTERS FIRST FLOOR 0.00
1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 15.97 11562.28 184649.58 0.00 15.97 0.00 15.97 11562.278 0.00 184649.58 0.00 184649.58 0.00
2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 31.63 10547.63 333621.60 0.00 31.63 0.00 31.63 10547.632 0.00 333621.60 0.00 333621.60 0.00
3 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 59.95 10202.01 611569.69 0.00 59.95 0.00 59.95 10202.01 0.00 611569.69 0.00 611569.69 0.00
4 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 112.14 8027.48 900201.61 0.00 112.14 0.00 112.14 8027.48 0.00 900201.61 0.00 900201.61 0.00
5 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m2 157.35 1039.29 163532.28 0.00 157.35 0.00 157.35 1039.29 0.00 163532.28 0.00 163532.28 0.00
6 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specificationsM25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 3.19 9861.94 31459.60 0.00 3.19 0.00 3.19 9861.943 0.00 31459.60 0.00 31459.60 0.00
7 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.34 139454.74 47414.61 0.00 0.34 0.00 0.34 139454.74 0.00 47414.61 0.00 47414.61 0.00
8 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.47 99803.15 46907.48 0.00 0.47 0.00 0.47 99803.15 0.00 46907.48 0.00 46907.48 0.00
9 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section m 40.00 241.39 9655.60 0.00 40.00 0.00 40.00 241.39 0.00 9655.60 0.00 9655.60 0.00
10 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. m2 8.82 7155.85 63114.60 0.00 8.82 0.00 8.82 7155.85 0.00 63114.60 0.00 63114.60 0.00
11 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyderesin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 30 mm thick Both side teak m2 22.68 4083.43 92612.19 0.00 22.68 0.00 22.68 4083.43 0.00 92612.19 0.00 92612.19 0.00
12 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness m2 13.44 3519.85 47306.78 0.00 13.44 0.00 13.44 3519.85 0.00 47306.78 0.00 47306.78 0.00
13 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 1254.90 184.83 231943.17 0.00 1254.90 0.00 1254.90 184.83 0.00 231943.17 0.00 231943.17 0.00
14 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 37.03 6801.34 251853.62 0.00 37.03 0.00 37.03 6801.34 0.00 251853.62 0.00 251853.62 0.00
15 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass.Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 4.80 5776.19 27725.71 0.00 4.80 0.00 4.80 5776.19 0.00 27725.71 0.00 27725.71 0.00
16 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 68.88 570.65 39306.37 0.00 68.88 0.00 68.88 570.65 0.00 39306.37 0.00 39306.37 0.00
17 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 1190.31 255.53 304159.91 0.00 1190.31 0.00 1190.31 255.53 0.00 304159.91 0.00 304159.91 0.00
18 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 1635.74 101.00 165209.74 0.00 1635.74 0.00 1635.74 101 0.00 165209.74 0.00 165209.74 0.00
19 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 622.26 350.47 218083.46 0.00 622.26 0.00 622.26 350.47 0.00 218083.46 0.00 218083.46 0.00
20 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 93.00 64.64 6011.52 0.00 93.00 0.00 93.00 64.64 0.00 6011.52 0.00 6011.52 0.00
21 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 150.00 320.17 48025.50 0.00 150.00 0.00 150.00 320.17 0.00 48025.50 0.00 48025.50 0.00
22 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 21.81 1241.29 27072.53 0.00 21.81 0.00 21.81 1241.29 0.00 27072.53 0.00 27072.53 0.00
23 Polymerized plaster reinforced with glass fibre mesh m2 17.34 91368.64 1584332.22 0.00 17.34 0.00 17.34 91368.64 0.00 1584332.22 0.00 1584332.22 0.00
24 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. m2 286.50 1182.71 338846.42 0.00 286.50 0.00 286.50 1182.71 0.00 338846.42 0.00 338846.42 0.00
25 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ( Volume 1 Page No 18 Item No 2.11.a) t 81.35 2876.48 234001.65 0.00 81.35 0.00 81.35 2876.48 0.00 234001.65 0.00 234001.65 0.00
26 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile Size of Tile 600x1200 mm m2 26.28 893.85 23490.38 0.00 26.28 0.00 26.28 893.85 0.00 23490.38 0.00 23490.38 0.00
27 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. m2 16.93 5379.26 91070.87 0.00 16.93 0.00 16.93 5379.26 0.00 91070.87 0.00 91070.87 0.00
28 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m2 136.46 1460.46 199294.37 0.00 136.46 0.00 136.46 1460.46 0.00 199294.37 0.00 199294.37 0.00
29 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. m2 1635.74 128.27 209816.37 0.00 1635.74 0.00 1635.74 128.27 0.00 209816.37 0.00 209816.37 0.00
30 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m2 622.26 175.74 109355.97 0.00 622.26 0.00 622.26 175.74 0.00 109355.97 0.00 109355.97 0.00
31 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 131.37 53.53 7032.24 0.00 131.37 0.00 131.37 53.53 0.00 7032.24 0.00 7032.24 0.00
32 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paintof approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 81.89 136.35 11165.70 0.00 81.89 0.00 81.89 136.35 0.00 11165.70 0.00 11165.70 0.00
33 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease,dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 11.34 2037.17 23101.51 0.00 11.34 0.00 11.34 2037.17 0.00 23101.51 0.00 23101.51 0.00
34 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge m2 51.12 825.17 42182.69 0.00 51.12 0.00 51.12 825.17 0.00 42182.69 0.00 42182.69 0.00
35 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. m3 16.00 1025.15 16402.40 0.00 16.00 0.00 16.00 1025.15 0.00 16402.40 0.00 16402.40 0.00
36 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. m2 48.00 171.70 8241.60 0.00 48.00 0.00 48.00 171.7 0.00 8241.60 0.00 8241.60 0.00
37 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.( Volume 2 Page No 104 Item No 12.51) Nos. 48.00 50.00 2400.00 0.00 48.00 0.00 48.00 50 0.00 2400.00 0.00 2400.00 0.00
38 Providing and fixing following fixtures to doors and windows. 0.00 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00
39 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type)(Volume 2 Page No 176 Item No. 20.34.1) Each 32.00 44.44 1422.08 0.00 32.00 0.00 32.00 44.44 0.00 1422.08 0.00 1422.08 0.00
40 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No A-27 Sl.No 285 ) Each 32.00 1062.52 34000.64 0.00 32.00 0.00 32.00 1062.52 0.00 34000.64 0.00 34000.64 0.00
41 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm(Volume 2 Page No 108 Item No. 12.73.1) Each 16.00 131.30 2100.80 0.00 16.00 0.00 16.00 131.3 0.00 2100.80 0.00 2100.80 0.00
42 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (Volume 2 Page No 107 Item No. 12.60 ) Each 16.00 121.20 1939.20 0.00 16.00 0.00 16.00 121.2 0.00 1939.20 0.00 1939.20 0.00
STAFF QUARTERS TERRECE FLOOR 0.00
1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 1.08 11676.76 12610.90 0.000 0.00 1.08 1.080 11676.756 0.00 0.00 12610.90 12610.90 0.00
2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates m³ 4.61 10658.90 49137.52 0.000 0.00 4.61 4.61 10658.898 0.00 0.00 49137.52 49137.52 0.00
3 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 0.63 10652.06 6710.80 0.000 0.00 0.63 0.63 10652.064 0.00 0.00 6710.80 6710.80 0.00
4 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 34.08 8106.96 276285.20 0.000 0.00 34.08 34.08 8106.96 0.00 0.00 276285.20 276285.20 0.00
5 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.08 140835.48 11266.84 0.000 0.00 0.08 0.08 140835.48 0.00 0.00 11266.84 11266.84 0.00
6 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) m2 1.89 7226.70 13658.46 0.000 0.00 1.89 1.89 7226.7 0.00 0.00 13658.46 13658.46 0.00
7 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 54.00 186.66 10079.64 0.000 0.00 54.00 54.00 186.66 0.00 0.00 10079.64 10079.64 0.00
8 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 1.80 6868.68 12363.62 0.000 0.00 1.80 1.80 6868.68 0.00 0.00 12363.62 12363.62 0.00
9 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 27.41 258.06 7073.42 0.000 0.00 27.41 27.41 258.06 0.00 0.00 7073.42 7073.42 0.00
10 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 27.41 102.00 2795.82 0.000 0.00 27.41 27.41 102 0.00 0.00 2795.82 2795.82 0.00
11 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 291.22 353.94 103072.64 0.000 0.00 291.22 291.22 353.94 0.00 0.00 103072.64 103072.64 0.00
12 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 44.00 65.28 2872.32 0.000 0.00 44.00 44.00 65.28 0.00 0.00 2872.32 2872.32 0.00
13 Polymerized plaster reinforced with glass fibre mesh m2 12.00 323.34 3880.08 0.000 0.00 12.00 12.00 323.34 0.00 0.00 3880.08 3880.08 0.00
14 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ( Volume 1 Page No 18 Item No 2.11.a) t 2.42 92273.28 223301.34 0.000 0.00 2.42 2.42 92273.28 0.00 0.00 223301.34 223301.34 0.00
15 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 27.41 129.54 3550.69 0.000 0.00 27.41 27.41 129.54 0.00 0.00 3550.69 3550.69 0.00
16 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paintof approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 291.22 177.48 51684.84 0.000 0.00 291.22 291.22 177.48 0.00 0.00 51684.84 51684.84 0.00
17 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 4.91 140.76 691.13 0.000 0.00 4.91 4.91 140.76 0.00 0.00 691.13 691.13 0.00
18 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. m2 590.31 833.34 491928.94 0.000 0.00 590.31 590.31 833.34 0.00 0.00 491928.94 491928.94 0.00
19 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. m3 11.34 2057.34 23330.24 0.000 0.00 11.34 11.34 2057.34 0.00 0.00 23330.24 23330.24 0.00
20 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. kg 200.00 138.72 27744.00 0.000 0.00 200.00 200.00 138.72 0.00 0.00 27744.00 27744.00 0.00
21 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. m2 24.96 579.36 14460.83 0.000 0.00 24.96 24.96 579.36 0.00 0.00 14460.83 14460.83 0.00
22 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.( Volume 2 Page No 104 Item No 12.51) Nos. 1.00 1035.30 1035.30 0.000 0.00 1.00 1.00 1035.3 0.00 0.00 1035.30 1035.30 0.00
23 Providing and fixing following fixtures to doors and windows. 0.00 0.000 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00
24 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type)(Volume 2 Page No 176 Item No. 20.34.1) Each 3.00 173.40 520.20 0.000 0.00 3.00 3.00 173.4 0.00 0.00 520.20 520.20 0.00
25 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No A-27 Sl.No 285 ) Each 3.00 50.00 150.00 0.000 0.00 3.00 3.00 50 0.00 0.00 150.00 150.00 0.00
26 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm(Volume 2 Page No 108 Item No. 12.73.1) Each 2.00 44.88 89.76 0.000 0.00 2.00 2.00 44.88 0.00 0.00 89.76 89.76 0.00
27 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (Volume 2 Page No 107 Item No. 12.60 ) Each 2.00 1073.04 2146.08 0.000 0.00 2.00 2.00 1073.04 0.00 0.00 2146.08 2146.08 0.00
28 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete (Volume 2 Page No 107 Item No. 12.63) Nos 1.00 132.60 132.60 0.000 0.00 1.00 1.00 132.6 0.00 0.00 132.60 132.60 0.00
29 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (Volume 2 Page No 107 Item No. 12.58) Nos 1.00 122.40 122.40 0.000 0.00 1.00 1.00 122.4 0.00 0.00 122.40 122.40 0.00
WATER SUPPLY 0.00
1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 50 mm nominal dia Pipes m 20.00 781.00 15620.00 0.000 0.00 20.00 20.000 781 0.00 0.00 15620.00 15620.00 0.00
2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 40 mm nominal dia Pipes m 15.00 536.00 8040.00 0.000 0.00 15.00 15.000 536 0.00 0.00 8040.00 8040.00 0.00
3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 32 mm nominal dia Pipes m 140.00 400.00 56000.00 0.000 0.00 140.00 140.000 400 0.00 0.00 56000.00 56000.00 0.00
4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal dia Pipes m 120.00 318.00 38160.00 0.000 0.00 120.00 120.000 318 0.00 0.00 38160.00 38160.00 0.00
5 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.150mm nominal dia pipes m 100.00 768.00 76800.00 0.000 0.00 100.00 100.000 768 0.00 0.00 76800.00 76800.00 0.00
6 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.110mm nominal dia pipes m 100.00 385.00 38500.00 0.000 0.00 100.00 100.000 385 0.00 0.00 38500.00 38500.00 0.00
7 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.110mm nominal dia pipes m 100.00 289.00 28900.00 0.000 0.00 100.00 100.000 289 0.00 0.00 28900.00 28900.00 0.00
8 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. m 180.00 568.00 102240.00 0.000 0.00 180.00 180.000 568 0.00 0.00 102240.00 102240.00 0.00
9 Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 40 mm dia GM (Copper alloy) Gate valves Each 8.00 1500.00 12000.00 0.000 0.00 8.00 8.000 1500 0.00 0.00 12000.00 12000.00 0.00
10 Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 32 mm dia GM (Copper alloy) Gate valves Each 8.00 1338.00 10704.00 0.000 0.00 8.00 8.000 1338 0.00 0.00 10704.00 10704.00 0.00
11 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. No 120.00 725.00 87000.00 0.000 0.00 120.00 120.000 725 0.00 0.00 87000.00 87000.00 0.00
12 Providing and fixing brass bib cock of approved quality : 20 mm nominal bore No 120.00 305.00 36600.00 0.000 0.00 120.00 120.000 305 0.00 0.00 36600.00 36600.00 0.00
13 Providing and fixing Wall spout with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy No 16.00 1323.00 21168.00 0.000 0.00 16.00 16.000 1323 0.00 0.00 21168.00 21168.00 0.00
14 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150mm diameter No. 16.00 279.00 4464.00 0.000 0.00 16.00 16.000 279 0.00 0.00 4464.00 4464.00 0.00
15 Providing and fixing Wall Mixer Non Telephonic made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a)Economy No 16.00 3054.00 48864.00 0.000 0.00 16.00 16.000 3054 0.00 0.00 48864.00 48864.00 0.00
16 Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 g No 16.00 314.00 5024.00 0.000 0.00 16.00 16.000 314 0.00 0.00 5024.00 5024.00 0.00
17 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. m 10.00 313.00 3130.00 0.000 0.00 10.00 10.000 313 0.00 0.00 3130.00 3130.00 0.00
18 Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks Each 20.00 323.00 6460.00 0.000 0.00 20.00 20.000 323 0.00 0.00 6460.00 6460.00 0.00
19 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. L 8000.00 9.00 72000.00 0.000 0.00 8000.00 8000.000 9 0.00 0.00 72000.00 72000.00 0.00
20 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m m 114.75 484.00 55539.00 0.000 0.00 114.75 114.750 484 0.00 0.00 55539.00 55539.00 0.00
21 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications m³ 114.75 160.00 18360.00 0.000 0.00 114.75 114.750 160 0.00 0.00 18360.00 18360.00 0.00
22 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Each 8.00 4884.00 39072.00 0.000 0.00 8.00 8.000 4884 0.00 0.00 39072.00 39072.00 0.00
23 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 8.00 4838.00 38704.00 0.000 0.00 8.00 8.000 4838 0.00 0.00 38704.00 38704.00 0.00
24 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required, White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps Each 16.00 2866.00 45856.00 0.000 0.00 16.00 16.000 2866 0.00 0.00 45856.00 45856.00 0.00
25 Providing and fixing unplasticised PVC connection pipe with brass unions : 20 mm nominal bore No 8.00 5618.00 44944.00 0.000 0.00 8.00 8.000 5618 0.00 0.00 44944.00 44944.00 0.00
26 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 24.00 110.00 2640.00 0.000 0.00 24.00 24.000 110 0.00 0.00 2640.00 2640.00 0.00
27 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 8.00 47.00 376.00 0.000 0.00 8.00 8.000 47 0.00 0.00 376.00 376.00 0.00
28 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors : * 100 mm inlet and 75 mm outlet * Hubless centrifugally cast (spun) iron epoxy coated inside & outside as perr IS : 15905 Each 40.00 475.00 19000.00 0.000 0.00 40.00 40.000 475 0.00 0.00 19000.00 19000.00 0.00
29 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. Each 15.00 5454.00 81810.00 0.000 0.00 15.00 15.000 5454 0.00 0.00 81810.00 81810.00 0.00
30 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm Each 16.00 1726.00 27616.00 0.000 0.00 16.00 16.000 1726 0.00 0.00 27616.00 27616.00 0.00
ELECTRICAL FOR STAFF QUARTERS 0.00
1 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 0.00 0.00 0.00 0.00
2 Supplying heavy gauge PVCConduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 0.00 0.00 0.00 0.00
3 Supplying And Fixing Metal Fan Box with Round Hook. no 48.00 117.00 5616.00 0.000 0.00 48.00 48.000 117 0.00 0.00 5616.00 5616.00 0.00
4 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. 0.00 0.00 0.00 0.00 0.00
Short point upto 3Mtr from tapping point to out let via switch box Point 112.00 269.00 30128.00 0.000 0.00 112.00 112.000 269 0.00 0.00 30128.00 30128.00 0.00
Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box Point 128.00 379.00 48512.00 0.000 0.00 128.00 128.000 379 0.00 0.00 48512.00 48512.00 0.00
Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box Point 176.00 555.00 97680.00 0.000 0.00 176.00 176.000 555 0.00 0.00 97680.00 97680.00 0.00
5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 0.00 0.00 0.00 0.00 0.00
6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 0.00 0.00 0.00 0.00 0.00
7 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 0.00 0.00 0.00 0.00 0.00
8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 0.00 0.00 0.00 0.00 0.00
9 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 0.00 0.00 0.00 0.00 0.00
10 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 0.00 0.00 0.00 0.00 0.00
11 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
12 Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 32.00 1492.00 47744.00 0.000 0.00 32.00 32.000 1492 0.00 0.00 47744.00 47744.00 0.00
13 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
14 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
17 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>1301m/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
18 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia no 6.00 3510.00 21060.00 0.000 0.00 6.00 6.000 3510 0.00 0.00 21060.00 21060.00 0.00
20 GI/Copper strips for grounding connections, using necessary fixing materials as required. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
21 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
22 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 48.00 171.00 8208.00 0.000 0.00 48.00 48.000 171 0.00 0.00 8208.00 8208.00 0.00
23 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Each 32.00 492.00 15744.00 0.000 0.00 32.00 32.000 492 0.00 0.00 15744.00 15744.00 0.00
24 Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
25 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 6 162 972 0.000 0.00 6.00 6.000 162 0.00 0.00 972.00 972.00 0.00
26 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
27 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
28 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. Each 1.00 9255.00 9255.00 0.000 0.00 1.00 1.000 9255 0.00 0.00 9255.00 9255.00 0.00
29 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy Each 1.00 9315.00 9315.00 0.000 0.00 1.00 1.000 9315 0.00 0.00 9315.00 9315.00 0.00
30 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. Each 4.00 5705.00 22820.00 0.000 0.00 4.00 4.000 5705 0.00 0.00 22820.00 22820.00 0.00
31 Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer Each 3.00 840.00 2520.00 0.000 0.00 3.00 3.000 840 0.00 0.00 2520.00 2520.00 0.00
32 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 3.00 515.00 1545.00 0.000 0.00 3.00 3.000 515 0.00 0.00 1545.00 1545.00 0.00
33 Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
34 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
35 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
36 Supplying.....litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate. 2kW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting. 0.000 0.00 0.00 0.00
37 Erection charges for fixing a ... litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm back plate and wiring complete with 15A 3 pin top. 0.000 0.00 0.00 0.00
SUMP,SEPTIC AND SOAK PIT 0.00
1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m m³ 83.23 102.00 8489.46 83.230 0.00 0.00 83.230 102 8489.46 0.00 0.00 8489.46 0.00
2 Providing and Filling in foundation with granite I trap broken metal 1OOmm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift. complete as per specifications. specification. m³ 7.76 2682.00 20812.32 7.760 0.00 0.00 7.760 2682 20812.32 0.00 0.00 20812.32 0.00
3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates m³ 8.23 5918.00 48705.14 8.230 0.00 0.00 8.230 5918 48705.14 0.00 0.00 48705.14 0.00
4 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m³ 1.70 7957.00 13526.90 1.700 0.00 0.00 1.700 7957 13526.90 0.00 0.00 13526.90 0.00
5 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m³ 107.74 277.00 29843.98 107.740 0.00 0.00 107.740 277 29843.98 0.00 0.00 29843.98 0.00
6 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer- in-Charge. SQM 107.74 64.00 6895.36 107.740 0.00 0.00 107.740 64 6895.36 0.00 0.00 6895.36 0.00
7 Providing Neat cement punning to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m³ 107.74 57.00 6141.18 107.740 0.00 0.00 107.740 57 6141.18 0.00 0.00 6141.18 0.00
8 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 26.30 8811.45 231741.14 26.300 0.00 0.00 26.300 8811.45 231741.14 0.00 0.00 231741.14 0.00
9 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.a. Buildings T 5.00 90464.00 452320.00 5.000 0.00 0.00 5.000 90464 452320.00 0.00 0.00 452320.00 0.00
10 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. m3 2.00 1962.00 3924.00 2.000 0.00 0.00 2.000 1962 3924.00 0.00 0.00 3924.00 0.00
11 Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. 105.54 507.00 53508.78 105.540 0.00 0.00 105.540 507 53508.78 0.00 0.00 53508.78 0.00
12 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge m3 2.35 1002.00 2354.70 2.350 0.00 0.00 2.350 1002 2354.70 0.00 0.00 2354.70 0.00
15 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. m3 1.57 1192.00 1871.44 1.570 0.00 0.00 1.570 1192 1871.44 0.00 0.00 1871.44 0.00
16 Providing and laying 100mm thick side wall & bottom slab and of 600mm width for drain with opening using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 150mm spacing jointed in CM 1:3 proportion and nicely finished Including providing holes in the walls wherever necessary including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. m3 6.28 5612.00 35243.36 6.280 0.00 0.00 6.280 5612 35243.36 0.00 0.00 35243.36 0.00
17 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 2 HP, Size 65x50 Head 13M, Discharge 462 LPM each 2.00 15610.00 31220.00 2.000 0.00 0.00 2.000 15610 31220.00 0.00 0.00 31220.00 0.00
SUMP,SEPTIC AND SOAK PIT 0.00
1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m m³ 83.23 102.00 8489.46 83.230 0.00 0.00 83.230 102 8489.46 0.00 0.00 8489.46 0.00
2 Providing and Filling in foundation with granite I trap broken metal 1OOmm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift. complete as per specifications. specification. m³ 7.76 2682.00 20812.32 7.760 0.00 0.00 7.760 2682 20812.32 0.00 0.00 20812.32 0.00
3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates m³ 8.23 5918.00 48705.14 8.230 0.00 0.00 8.230 5918 48705.14 0.00 0.00 48705.14 0.00
4 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m³ 1.70 7957.00 13526.90 1.700 0.00 0.00 1.700 7957 13526.90 0.00 0.00 13526.90 0.00
5 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m³ 107.74 277.00 29843.98 107.740 0.00 0.00 107.740 277 29843.98 0.00 0.00 29843.98 0.00
6 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer- in-Charge. SQM 107.74 64.00 6895.36 107.740 0.00 0.00 107.740 64 6895.36 0.00 0.00 6895.36 0.00
7 Providing Neat cement punning to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m³ 107.74 57.00 6141.18 107.740 0.00 0.00 107.740 57 6141.18 0.00 0.00 6141.18 0.00
8 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 26.30 8811.45 231741.14 26.300 0.00 0.00 26.300 8811.45 231741.14 0.00 0.00 231741.14 0.00
9 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.a. Buildings T 5.00 90464.00 452320.00 5.000 0.00 0.00 5.000 90464 452320.00 0.00 0.00 452320.00 0.00
10 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. m3 2.00 1962.00 3924.00 2.000 0.00 0.00 2.000 1962 3924.00 0.00 0.00 3924.00 0.00
11 Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. 105.54 507.00 53508.78 105.540 0.00 0.00 105.540 507 53508.78 0.00 0.00 53508.78 0.00
12 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge m3 2.35 1002.00 2354.70 2.350 0.00 0.00 2.350 1002 2354.70 0.00 0.00 2354.70 0.00
15 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. m3 1.57 1192.00 1871.44 1.570 0.00 0.00 1.570 1192 1871.44 0.00 0.00 1871.44 0.00
16 Providing and laying 100mm thick side wall & bottom slab and of 600mm width for drain with opening using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 150mm spacing jointed in CM 1:3 proportion and nicely finished Including providing holes in the walls wherever necessary including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. m3 6.28 5612.00 35243.36 6.280 0.00 0.00 6.280 5612 35243.36 0.00 0.00 35243.36 0.00
17 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 2 HP, Size 65x50 Head 13M, Discharge 462 LPM each 2.00 15610.00 31220.00 2.000 0.00 0.00 2.000 15610 31220.00 0.00 0.00 31220.00 0.00
RAIN WATER HARVESTING 0.00
1 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (Volume 2 Page No. 151 Item No. 17.1) m3 4.00 1002.00 4008.00 0.000 0.00 4.00 4.000 1002 0.00 0.00 4008.00 4008.00 0.00
2 Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.(Volume 2 Page No. 151 Item No. 17.2) m3 16.00 1186.00 18976.00 0.000 0.00 16.00 16.000 1186 0.00 0.00 18976.00 18976.00 0.00
3 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.(Volume 2 Page No. 151 Item No. 17.3) m3 16.00 1192.00 19072.00 0.000 0.00 16.00 16.000 1192 0.00 0.00 19072.00 19072.00 0.00
4 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter m 333.00 291.00 96903.00 0.000 0.00 333.00 333.000 291 0.00 0.00 96903.00 96903.00 0.00
76274640.33 Add 5% tender premium 3813725.32
0.8% Consultancy Charges+18% GST ₹ 635,765.56
Procurement of Furniture, External Electrification and Transformer, RO 4000000.00
Price Variation & QA Charges 500000.00
Estimate Amount 99000000.00
Percentage 34% 31% 35% 100%
NAME OF WORK: CONSTRUCTION OF BOYS/GIRLS HOSTEL AND STAFF HOUSING COMPLEX IN HALE VANTAMURI, HUKKERI TALUKA BELAGAVI DISTRICT UNDER HOA 4059-60-051-0-05-422 SCP AND 4059-60-051-0-05-423 TSP FOR FY 2025-26
Sl no Items Unit Qty Rate Amount Milestone -1 Quantity Milestone -2 Quantity Milestone -3 Quantity Total Quantity Rate in Rs. Amount for Mile Stone 1 in Rs Amount for Mile Stone 2 in Rs Amount for Mile Stone 3 in Rs Total Amount in Rs
1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter includingdressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage ofmachinery & other appurtenances required to complete the work.In all kinds of soils upto 300 mm depth m³ 80.12 95.00 7611.40 80.12 0.00 0.00 80.12 95 7611.40 0.00 0.00 7611.40 0.00
2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m m³ 228.97 102.00 23354.94 228.97 0.00 0.00 228.97 102 23354.94 0.00 0.00 23354.94 0.00
3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth m³ 343.45 363.00 124673.08 343.45 0.00 0.00 343.45 363 124673.08 0.00 0.00 124673.08 0.00
4 Providing and laying in position Cement Concrete for levelling course for all works in foundation.The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. m³ 138.84 5918.00 821655.12 138.84 0.00 0.00 138.84 5918 821655.12 0.00 0.00 821655.12 0.00
5 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 145.26 6725.16 976896.74 145.26 0.00 0.00 145.26 6725.16 976896.74 0.00 0.00 976896.74 0.00
6 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 12.05 10585.90 127560.10 12.05 0.00 0.00 12.05 10585.9 127560.10 0.00 0.00 127560.10 0.00
7 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) m3 97.65 6594.00 643904.10 97.65 0.00 0.00 97.65 6594 643904.10 0.00 0.00 643904.10 0.00
8 Providing ruled pointing to cursed stone masonry with lime mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost all materials, labour, usage charges of achinery, curing complete as pre specification. m2 72.88 255.00 18584.40 72.88 0.00 0.00 72.88 255 18584.40 0.00 0.00 18584.40 0.00
9 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 29.22 9340.50 272929.41 29.22 0.00 0.00 29.22 9340.5 272929.41 0.00 0.00 272929.41 0.00
10 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 17.37 11447.80 198848.29 17.37 0.00 0.00 17.37 11447.8 198848.29 0.00 0.00 198848.29 0.00
11 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 35.69 10774.40 384538.34 35.69 0.00 0.00 35.69 10774.4 384538.34 0.00 0.00 384538.34 0.00
12 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 82.57 10101.00 834064.82 82.57 0.00 0.00 82.57 10101 834064.82 0.00 0.00 834064.82 0.00
13 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. m3 228.97 266.00 60905.49 228.97 0.00 0.00 228.97 266 60905.49 0.00 0.00 60905.49 0.00
14 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. m3 856.35 474.00 405908.19 856.35 0.00 0.00 856.35 474 405908.19 0.00 0.00 405908.19 0.00
15 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier underand around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along theexternal perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. m2 531.36 118.00 62700.48 531.36 0.00 0.00 531.36 118 62700.48 0.00 0.00 62700.48 0.00
16 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 102.75 7948.00 816657.00 102.75 0.00 0.00 102.75 7948 816657.00 0.00 0.00 816657.00 0.00
17 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m2 158.72 1029.00 163322.88 158.72 0.00 0.00 158.72 1029 163322.88 0.00 0.00 163322.88 0.00
18 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specificationsM25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 7.75 9764.30 75673.33 7.75 0.00 0.00 7.75 9764.3 75673.33 0.00 0.00 75673.33 0.00
19 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.12 138074.00 16568.88 0.12 0.00 0.00 0.12 138074 16568.88 0.00 0.00 16568.88 0.00
20 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.48 98815.00 47431.20 0.48 0.00 0.00 0.48 98815 47431.20 0.00 0.00 47431.20 0.00
21 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section m 60.10 239.00 14363.90 0.00 0.00 60.10 60.10 239 0.00 0.00 14363.90 14363.90 0.00
22 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. m2 4.50 7085.00 31882.50 0.00 0.00 4.50 4.50 7085 0.00 0.00 31882.50 31882.50 0.00
23 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyderesin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 30 mm thick Both side teak m2 32.50 4043.00 131397.50 32.50 0.00 0.00 32.50 4043 131397.50 0.00 0.00 131397.50 0.00
24 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness m2 20.37 3485.00 70989.45 0.00 0.00 20.37 20.37 3485 0.00 0.00 70989.45 70989.45 0.00
25 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 2948.70 183.00 539612.10 0.00 0.00 2948.70 2948.70 183 0.00 0.00 539612.10 539612.10 0.00
26 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 63.75 6734.00 429292.50 0.00 0.00 63.75 63.75 6734 0.00 0.00 429292.50 429292.50 0.00
27 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass.Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 23.94 5719.00 136912.86 0.00 0.00 23.94 23.94 5719 0.00 0.00 136912.86 136912.86 0.00
28 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 63.75 687.00 43796.25 63.75 0.00 0.00 63.75 687 43796.25 0.00 0.00 43796.25 0.00
29 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 4.50 8276.00 37242.00 4.50 0.00 0.00 4.50 8276 37242.00 0.00 0.00 37242.00 0.00
30 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 248.70 565.00 140515.50 248.70 0.00 0.00 248.70 565 140515.50 0.00 0.00 140515.50 0.00
31 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 1425.58 253.00 360671.74 1425.58 0.00 0.00 1425.58 253 360671.74 0.00 0.00 360671.74 0.00
32 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 2016.75 100.00 201675.00 2016.75 0.00 0.00 2016.75 100 201675.00 0.00 0.00 201675.00 0.00
33 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 551.19 347.00 191262.93 551.19 0.00 0.00 551.19 347 191262.93 0.00 0.00 191262.93 0.00
34 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 83.00 64.00 5312.00 83.00 0.00 0.00 83.00 64 5312.00 0.00 0.00 5312.00 0.00
35 Polymerized plaster reinforced with glass fibre mesh m2 315.00 317.00 99855.00 0.00 0.00 315.00 315.00 317 0.00 0.00 99855.00 99855.00 0.00
36 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. m2 13.48 1229.00 16560.78 0.00 0.00 13.48 13.48 1229 0.00 0.00 16560.78 16560.78 0.00
37 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ( Volume 1 Page No 18 Item No 2.11.a) t 34.53 90464.00 3124025.76 0.00 0.00 34.53 34.53 90464 0.00 0.00 3124025.76 3124025.76 0.00
38 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile Size of Tile 600x600 mm m2 360.73 1171.00 422414.83 0.00 0.00 360.73 360.73 1171 0.00 0.00 422414.83 422414.83 0.00
39 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. m2 144.01 2848.00 410140.48 0.00 0.00 144.01 144.01 2848 0.00 0.00 410140.48 410140.48 0.00
40 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m2 58.80 885.00 52038.00 0.00 0.00 58.80 58.80 885 0.00 0.00 52038.00 52038.00 0.00
41 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. m2 49.75 5326.00 264968.50 0.00 0.00 49.75 49.75 5326 0.00 0.00 264968.50 264968.50 0.00
42 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m2 103.02 1446.00 148966.92 0.00 0.00 103.02 103.02 1446 0.00 0.00 148966.92 148966.92 0.00
43 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. m2 2.16 2085.00 4503.60 0.00 0.00 2.16 2.16 2085 0.00 0.00 4503.60 4503.60 0.00
44 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 2016.75 127.00 256127.25 0.00 0.00 2016.75 2016.75 127 0.00 0.00 256127.25 256127.25 0.00
45 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 551.19 174.00 95907.06 0.00 0.00 551.19 551.19 174 0.00 0.00 95907.06 95907.06 0.00
46 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 96.87 53.00 5134.11 0.00 0.00 96.87 96.87 53 0.00 0.00 5134.11 5134.11 0.00
47 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge m2 96.20 135.00 12987.00 0.00 0.00 96.20 96.20 135 0.00 0.00 12987.00 12987.00 0.00
48 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 96.87 139.00 13464.93 0.00 0.00 96.87 96.87 139 0.00 0.00 13464.93 13464.93 0.00
49 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos. 12.00 1015.00 12180.00 0.00 0.00 12.00 12.00 1015 0.00 0.00 12180.00 12180.00 0.00
50 Providing and fixing following fixtures to doors and windows. 0.00 0.00 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00
51 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type)(Volume 2 Page No 176 Item No. 20.34.1) Each 62.00 170.00 10540.00 0.00 0.00 62.00 62.00 170 0.00 0.00 10540.00 10540.00 0.00
52 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No A-27 Sl.No 285 ) Each 48.00 50.00 2400.00 0.00 0.00 48.00 48.00 50 0.00 0.00 2400.00 2400.00 0.00
53 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm(Volume 2 Page No 108 Item No. 12.73.1) Each 24.00 44.00 1056.00 0.00 0.00 24.00 24.00 44 0.00 0.00 1056.00 1056.00 0.00
54 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (Volume 2 Page No 107 Item No. 12.60 ) Each 24.00 1052.00 25248.00 0.00 0.00 24.00 24.00 1052 0.00 0.00 25248.00 25248.00 0.00
55 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete (Volume 2 Page No 107 Item No. 12.63) Nos 40.00 130.00 5200.00 0.00 0.00 40.00 40.00 130 0.00 0.00 5200.00 5200.00 0.00
56 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (Volume 2 Page No 107 Item No. 12.58) Nos 12.00 120.00 1440.00 0.00 0.00 12.00 12.00 120 0.00 0.00 1440.00 1440.00 0.00
13403872.62 Grand Total Rs 7195661.09 0.00 6208211.53 13403872.62 0.00 0.00 0.00 0.00 #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE!
FIRST FLOOR 0.00
1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 17.37 11562.28 200836.77 0.00 17.37 0.00 17.37 11562.278 0.00 200836.77 0.00 200836.77 0.00
2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 35.27 10882.14 383813.22 0.00 35.27 0.00 35.27 10882.144 0.00 383813.22 0.00 383813.22 0.00
3 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 78.61 10202.01 801961.23 0.00 78.61 0.00 78.61 10202.01 0.00 801961.23 0.00 801961.23 0.00
4 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 108.29 8027.48 869295.81 0.00 108.29 0.00 108.29 8027.48 0.00 869295.81 0.00 869295.81 0.00
5 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m2 135.89 1039.29 141229.12 0.00 135.89 0.00 135.89 1039.29 0.00 141229.12 0.00 141229.12 0.00
6 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specificationsM25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 10.79 9861.94 106410.36 0.00 10.79 0.00 10.79 9861.943 0.00 106410.36 0.00 106410.36 0.00
7 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.63 99803.15 62875.98 0.00 0.63 0.00 0.63 99803.15 0.00 62875.98 0.00 62875.98 0.00
8 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section m 60.00 241.39 14483.40 0.00 60.00 0.00 60.00 241.39 0.00 14483.40 0.00 14483.40 0.00
9 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyderesin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 30 mm thick Both side teak m2 34.25 4083.43 139857.48 0.00 34.25 0.00 34.25 4083.43 0.00 139857.48 0.00 139857.48 0.00
10 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness m2 20.16 3519.85 70960.18 0.00 20.16 0.00 20.16 3519.85 0.00 70960.18 0.00 70960.18 0.00
11 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 2745.00 184.83 507358.35 0.00 2745.00 0.00 2745.00 184.83 0.00 507358.35 0.00 507358.35 0.00
12 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 60.60 6801.34 412161.20 0.00 60.60 0.00 60.60 6801.34 0.00 412161.20 0.00 412161.20 0.00
13 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass.Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 30.90 5776.19 178484.27 0.00 30.90 0.00 30.90 5776.19 0.00 178484.27 0.00 178484.27 0.00
14 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 92.04 570.65 52522.63 0.00 92.04 0.00 92.04 570.65 0.00 52522.63 0.00 52522.63 0.00
15 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 1305.14 255.53 333502.42 0.00 1305.14 0.00 1305.14 255.53 0.00 333502.42 0.00 333502.42 0.00
16 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 1604.75 101.00 162079.75 0.00 1604.75 0.00 1604.75 101 0.00 162079.75 0.00 162079.75 0.00
17 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 617.51 350.47 216418.73 0.00 617.51 0.00 617.51 350.47 0.00 216418.73 0.00 216418.73 0.00
18 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 93.00 64.64 6011.52 0.00 93.00 0.00 93.00 64.64 0.00 6011.52 0.00 6011.52 0.00
19 Polymerized plaster reinforced with glass fibre mesh m2 315.00 320.17 100853.55 0.00 315.00 0.00 315.00 320.17 0.00 100853.55 0.00 100853.55 0.00
20 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification t 18.20 91368.64 1662909.25 0.00 18.20 0.00 18.20 91368.64 0.00 1662909.25 0.00 1662909.25 0.00
21 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile Size of Tile 600x600 mm m2 373.43 1182.71 441659.40 0.00 373.43 0.00 373.43 1182.71 0.00 441659.40 0.00 441659.40 0.00
22 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. m2 90.15 2876.48 259314.67 0.00 90.15 0.00 90.15 2876.48 0.00 259314.67 0.00 259314.67 0.00
23 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m2 53.40 893.85 47731.59 0.00 0.00 53.40 53.40 893.85 0.00 0.00 47731.59 47731.59 0.00
24 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. m2 23.66 5379.26 127273.29 0.00 0.00 23.66 23.66 5379.26 0.00 0.00 127273.29 127273.29 0.00
25 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m2 180.18 1460.46 263145.68 0.00 0.00 180.18 180.18 1460.46 0.00 0.00 263145.68 263145.68 0.00
26 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. m2 2.16 2105.85 4548.64 0.00 0.00 2.16 2.16 2105.85 0.00 0.00 4548.64 4548.64 0.00
27 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 1604.75 128.27 205841.28 0.00 0.00 1604.75 1604.75 128.27 0.00 0.00 205841.28 205841.28 0.00
28 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge m2 617.51 175.74 108521.21 0.00 0.00 617.51 617.51 175.74 0.00 0.00 108521.21 108521.21 0.00
29 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease,dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 91.20 53.53 4881.94 0.00 0.00 91.20 91.20 53.53 0.00 0.00 4881.94 4881.94 0.00
30 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge m2 88.72 136.35 12096.97 0.00 0.00 88.72 88.72 136.35 0.00 0.00 12096.97 12096.97 0.00
31 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.( Volume 2 Page No 47 Item No 8.33.3) m2 91.20 140.39 12803.57 0.00 0.00 91.20 91.20 140.39 0.00 0.00 12803.57 12803.57 0.00
32 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. m3 22.06 2037.17 44939.97 0.00 0.00 22.06 22.06 2037.17 0.00 0.00 44939.97 44939.97 0.00
33 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. m2 93.40 825.17 77070.88 0.00 0.00 93.40 93.40 825.17 0.00 0.00 77070.88 77070.88 0.00
34 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.( Volume 2 Page No 104 Item No 12.51) Nos. 11.00 1025.15 11276.65 0.00 0.00 11.00 11.00 1025.15 0.00 0.00 11276.65 11276.65 0.00
35 Providing and fixing following fixtures to doors and windows. 0.00 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00
36 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) Each 60.00 171.70 10302.00 0.00 0.00 60.00 60.00 171.7 0.00 0.00 10302.00 10302.00 0.00
37 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No A-27 Sl.No 285 ) Each 44.00 50.00 2200.00 0.00 0.00 44.00 44.00 50 0.00 0.00 2200.00 2200.00 0.00
38 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm Each 22.00 44.44 977.68 0.00 0.00 22.00 22.00 44.44 0.00 0.00 977.68 977.68 0.00
39 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 22.00 1062.52 23375.44 0.00 0.00 22.00 22.00 1062.52 0.00 0.00 23375.44 23375.44 0.00
40 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Nos 40.00 131.30 5252.00 0.00 0.00 40.00 40.00 131.3 0.00 0.00 5252.00 5252.00 0.00
41 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Nos 20.00 121.20 2424.00 0.00 0.00 20.00 20.00 121.2 0.00 0.00 2424.00 2424.00 0.00
TERRECE FLOOR 0.00
1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 1.90 11676.76 22185.84 0.000 1.90 0.00 1.900 11676.756 0.00 22185.84 0.00 22185.84 0.00
2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates m³ 4.32 10658.90 46046.44 0.000 4.32 0.00 4.32 10658.898 0.00 46046.44 0.00 46046.44 0.00
3 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 3.31 10989.89 36376.53 0.000 3.31 0.00 3.31 10989.888 0.00 36376.53 0.00 36376.53 0.00
4 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 28.54 8106.96 231372.64 0.000 28.54 0.00 28.54 8106.96 0.00 231372.64 0.00 231372.64 0.00
5 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 0.25 9959.59 2489.90 0.000 0.25 0.00 0.25 9959.586 0.00 2489.90 0.00 2489.90 0.00
6 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.05 100791.30 5039.56 0.000 0.05 0.00 0.05 100791.3 0.00 5039.56 0.00 5039.56 0.00
7 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) m2 3.25 7226.70 23486.78 0.000 3.25 0.00 3.25 7226.7 0.00 23486.78 0.00 23486.78 0.00
8 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 81.00 186.66 15119.46 0.000 81.00 0.00 81.00 186.66 0.00 15119.46 0.00 15119.46 0.00
9 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 2.70 6868.68 18545.44 0.000 2.70 0.00 2.70 6868.68 0.00 18545.44 0.00 18545.44 0.00
10 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 48.28 258.06 12459.14 0.000 48.28 0.00 48.28 258.06 0.00 12459.14 0.00 12459.14 0.00
11 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 48.28 102.00 4924.56 0.000 48.28 0.00 48.28 102 0.00 4924.56 0.00 4924.56 0.00
12 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 267.77 353.94 94774.51 0.000 267.77 0.00 267.77 353.94 0.00 94774.51 0.00 94774.51 0.00
13 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 40.00 65.28 2611.20 0.000 40.00 0.00 40.00 65.28 0.00 2611.20 0.00 2611.20 0.00
14 Polymerized plaster reinforced with glass fibre mesh m2 18.00 323.34 5820.12 0.000 18.00 0.00 18.00 323.34 0.00 5820.12 0.00 5820.12 0.00
15 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification t 1.55 92273.28 143023.58 0.000 1.55 0.00 1.55 92273.28 0.00 143023.58 0.00 143023.58 0.00
16 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 48.28 129.54 6254.19 0.000 0.00 48.28 48.28 129.54 0.00 0.00 6254.19 6254.19 0.00
17 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paintof approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Volume 2 Page No. 46 Item No 8.30) m2 267.77 177.48 47523.82 0.000 0.00 267.77 267.77 177.48 0.00 0.00 47523.82 47523.82 0.00
18 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease,dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 8.45 54.06 456.81 0.000 0.00 8.45 8.45 54.06 0.00 0.00 456.81 456.81 0.00
19 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 8.45 140.76 1189.42 0.000 0.00 8.45 8.45 140.76 0.00 0.00 1189.42 1189.42 0.00
20 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.( Volume 2 Page No 47 Item No 8.33.3) m2 2.70 141.78 382.81 0.000 0.00 2.70 2.70 141.78 0.00 0.00 382.81 382.81 0.00
21 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. m2 728.62 833.34 607188.19 0.000 0.00 728.62 728.62 833.34 0.00 0.00 607188.19 607188.19 0.00
22 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. m3 22.06 2057.34 45384.92 0.000 0.00 22.06 22.06 2057.34 0.00 0.00 45384.92 45384.92 0.00
23 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. kg 250.00 138.72 34680.00 0.000 0.00 250.00 250.00 138.72 0.00 0.00 34680.00 34680.00 0.00
24 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. m2 34.89 579.36 20213.87 0.000 0.00 34.89 34.89 579.36 0.00 0.00 20213.87 20213.87 0.00
25 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.( Volume 2 Page No 104 Item No 12.51) Nos. 1.00 1035.30 1035.30 0.000 0.00 1.00 1.00 1035.3 0.00 0.00 1035.30 1035.30 0.00
26 Providing and fixing following fixtures to doors and windows. 0.000 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00
27 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) Each 6.00 173.40 1040.40 0.000 0.00 6.00 6.00 173.4 0.00 0.00 1040.40 1040.40 0.00
28 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No A-27 Sl.No 285 ) Each 4.00 50.00 200.00 0.000 0.00 4.00 4.00 50 0.00 0.00 200.00 200.00 0.00
29 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm Each 2.00 44.88 89.76 0.000 0.00 2.00 2.00 44.88 0.00 0.00 89.76 89.76 0.00
30 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 2.00 1073.04 2146.08 0.000 0.00 2.00 2.00 1073.04 0.00 0.00 2146.08 2146.08 0.00
31 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Nos 4.00 132.60 530.40 0.000 0.00 4.00 4.00 132.6 0.00 0.00 530.40 530.40 0.00
32 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Nos 2.00 122.40 244.80 0.000 0.00 2.00 2.00 122.4 0.00 0.00 244.80 244.80 0.00
1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 50 mm nominal dia Pipes m 20.00 781.00 15620.00 0.000 0.00 20.00 20.000 781 0.00 0.00 15620.00 15620.00 0.00
2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 40 mm nominal dia Pipes m 15.00 536.00 8040.00 0.000 0.00 15.00 15.000 536 0.00 0.00 8040.00 8040.00 0.00
3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 32 mm nominal dia Pipes m 140.00 400.00 56000.00 0.000 0.00 140.00 140.000 400 0.00 0.00 56000.00 56000.00 0.00
4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal dia Pipes m 120.00 318.00 38160.00 0.000 0.00 120.00 120.000 318 0.00 0.00 38160.00 38160.00 0.00
5 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.150mm nominal dia pipes m 100.00 768.00 76800.00 0.000 0.00 100.00 100.000 768 0.00 0.00 76800.00 76800.00 0.00
6 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.110mm nominal dia pipes m 100.00 385.00 38500.00 0.000 0.00 100.00 100.000 385 0.00 0.00 38500.00 38500.00 0.00
7 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.110mm nominal dia pipes m 80.00 289.00 23120.00 0.000 0.00 80.00 80.000 289 0.00 0.00 23120.00 23120.00 0.00
8 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. m 250.00 568.00 142000.00 0.000 0.00 250.00 250.000 568 0.00 0.00 142000.00 142000.00 0.00
9 Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 40 mm dia GM (Copper alloy) Gate valves Each 8.00 1500.00 12000.00 0.000 0.00 8.00 8.000 1500 0.00 0.00 12000.00 12000.00 0.00
10 Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 32 mm dia GM (Copper alloy) Gate valves Each 8.00 1338.00 10704.00 0.000 0.00 8.00 8.000 1338 0.00 0.00 10704.00 10704.00 0.00
11 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. No 47.00 725.00 34075.00 0.000 0.00 47.00 47.000 725 0.00 0.00 34075.00 34075.00 0.00
12 Providing and fixing brass bib cock of approved quality : 20 mm nominal bore No 47.00 305.00 14335.00 0.000 0.00 47.00 47.000 305 0.00 0.00 14335.00 14335.00 0.00
13 Providing and fixing Wall spout with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy No 13.00 1323.00 17199.00 0.000 0.00 13.00 13.000 1323 0.00 0.00 17199.00 17199.00 0.00
14 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150mm diameter No. 13.00 279.00 3627.00 0.000 0.00 13.00 13.000 279 0.00 0.00 3627.00 3627.00 0.00
15 Providing and fixing Wall Mixer Non Telephonic made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a)Economy No 13.00 3054.00 39702.00 0.000 0.00 13.00 13.000 3054 0.00 0.00 39702.00 39702.00 0.00
16 Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 g No 8.00 314.00 2512.00 0.000 0.00 8.00 8.000 314 0.00 0.00 2512.00 2512.00 0.00
17 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. m 10.00 313.00 3130.00 0.000 0.00 10.00 10.000 313 0.00 0.00 3130.00 3130.00 0.00
18 Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks Each 20.00 323.00 6460.00 0.000 0.00 20.00 20.000 323 0.00 0.00 6460.00 6460.00 0.00
19 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. L 10000.00 9.00 90000.00 0.000 0.00 10000.00 10000.000 9 0.00 0.00 90000.00 90000.00 0.00
20 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m m 114.75 484.00 55539.00 0.000 0.00 114.75 114.750 484 0.00 0.00 55539.00 55539.00 0.00
21 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications m³ 114.75 160.00 18360.00 0.000 0.00 114.75 114.750 160 0.00 0.00 18360.00 18360.00 0.00
22 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Each 5.00 4884.00 24420.00 0.000 0.00 5.00 5.000 4884 0.00 0.00 24420.00 24420.00 0.00
23 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 8.00 4838.00 38704.00 0.000 0.00 8.00 8.000 4838 0.00 0.00 38704.00 38704.00 0.00
24 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required, White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps Each 9.00 2866.00 25794.00 0.000 0.00 9.00 9.000 2866 0.00 0.00 25794.00 25794.00 0.00
25 Providing and fixing unplasticised PVC connection pipe with brass unions : 20 mm nominal bore No 9.00 110.00 990.00 0.000 0.00 9.00 9.000 110 0.00 0.00 990.00 990.00 0.00
26 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 4.00 4454.00 17816.00 0.000 0.00 4.00 4.000 4454 0.00 0.00 17816.00 17816.00 0.00
27 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 4.00 47.00 188.00 0.000 0.00 4.00 4.000 47 0.00 0.00 188.00 188.00 0.00
28 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors : * 100 mm inlet and 75 mm outlet * Hubless centrifugally cast (spun) iron epoxy coated inside & outside as perr IS : 15905 Each 36.00 475.00 17100.00 0.000 0.00 36.00 36.000 475 0.00 0.00 17100.00 17100.00 0.00
29 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. Each 15.00 5454.00 81810.00 0.000 0.00 15.00 15.000 5454 0.00 0.00 81810.00 81810.00 0.00
30 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm Each 10.00 1726.00 17260.00 0.000 0.00 10.00 10.000 1726 0.00 0.00 17260.00 17260.00 0.00
ELECTRICAL FOR BOYS HOSTEL
1 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 0.00 0.00 0.00
2 Supplying heavy gauge PVCConduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 0.00 0.00 0.00 0.00
3 Supplying And Fixing Metal Fan Box with Round Hook. no 72.00 117.00 8424.00 0.000 0.00 72.00 72.000 117 0.00 0.00 8424.00 8424.00 0.00
4 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. 0.00 0.00 0.00 0.00 0.00
Short point upto 3Mtr from tapping point to out let via switch box Point 96.00 269.00 25824.00 0.000 0.00 96.00 96.000 269 0.00 0.00 25824.00 25824.00 0.00
Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box Point 128.00 379.00 48512.00 0.000 0.00 128.00 128.000 379 0.00 0.00 48512.00 48512.00 0.00
Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box Point 225.00 555.00 124875.00 0.000 0.00 225.00 225.000 555 0.00 0.00 124875.00 124875.00 0.00
5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 0.00 0.00 0.00 0.00 0.00
6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 0.00 0.00 0.00 0.00 0.00
7 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 0.00 0.00 0.00 0.00 0.00
8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 0.00 0.00 0.00 0.00 0.00
9 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 0.00 0.00 0.00 0.00 0.00
10 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 0.00 0.00 0.00 0.00 0.00
11 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
12 Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 26.00 1492.00 38792.00 0.000 0.00 26.00 26.000 1492 0.00 0.00 38792.00 38792.00 0.00
13 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
14 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
17 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>1301m/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
18 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia no 6.00 3510.00 21060.00 0.000 0.00 6.00 6.000 3510 0.00 0.00 21060.00 21060.00 0.00
20 GI/Copper strips for grounding connections, using necessary fixing materials as required. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
21 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
22 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 72.00 171.00 12312.00 0.000 0.00 72.00 72.000 171 0.00 0.00 12312.00 12312.00 0.00
23 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Each 26.00 492.00 12792.00 0.000 0.00 26.00 26.000 492 0.00 0.00 12792.00 12792.00 0.00
24 Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
25 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 6 162 972 0.000 0.00 6.00 6.000 162 0.00 0.00 972.00 972.00 0.00
26 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
27 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
28 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. Each 1.00 9255.00 9255.00 0.000 0.00 1.00 1.000 9255 0.00 0.00 9255.00 9255.00 0.00
29 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy Each 1.00 9315.00 9315.00 0.000 0.00 1.00 1.000 9315 0.00 0.00 9315.00 9315.00 0.00
30 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. Each 1.00 5705.00 5705.00 0.000 0.00 1.00 1.000 5705 0.00 0.00 5705.00 5705.00 0.00
31 Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer Each 3.00 840.00 2520.00 0.000 0.00 3.00 3.000 840 0.00 0.00 2520.00 2520.00 0.00
32 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 6.00 515.00 3090.00 0.000 0.00 6.00 6.000 515 0.00 0.00 3090.00 3090.00 0.00
33 Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
34 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
35 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
UPS and Batteries 0.00
40 Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
41 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
Providing 4 Kg Fire Extinguisher Powder Based 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
42 Supply and installation of 4kg Stored Pressure Type, Pressure Guage, Gross Weight 7.4Kg, empty weight 3.4 Kg, Can Height 480 MM, Diameter 160 MM, Discharge Time less than 13 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, Can construction Deep drawn & Co., Mig welded, valve Construciton Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60 MM, IS 15683 and CE Approved 5 years warranty. with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor / MS brackets & accessories if it is fixing on wall,, labour, usage charges of machinery complete as per specifications. complete Each 6 3350 20100 0.000 0.00 6.00 6.000 3350 0.00 0.00 20100.00 20100.00 0.00
GROUND FLOOR FOR GIRLS HOSTEL 0.00
1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter includingdressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage ofmachinery & other appurtenances required to complete the work.In all kinds of soils upto 300 mm depth m³ 80.12 95.00 7611.40 80.12 0.00 0.00 80.12 95 7611.40 0.00 0.00 7611.40 0.00
2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m m³ 228.97 102.00 23354.94 228.97 0.00 0.00 228.97 102 23354.94 0.00 0.00 23354.94 0.00
3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.In ordinary/soft rock without blasting upto 1.5 m depth m³ 343.45 363.00 124673.08 343.45 0.00 0.00 343.45 363 124673.08 0.00 0.00 124673.08 0.00
4 Providing and laying in position Cement Concrete for levelling course for all works in foundation.The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. m³ 138.84 5918.00 821655.12 138.84 0.00 0.00 138.84 5918 821655.12 0.00 0.00 821655.12 0.00
5 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 145.29 6725.16 977076.81 145.29 0.00 0.00 145.29 6725.16 977076.81 0.00 0.00 977076.81 0.00
6 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 10.90 10585.90 115382.08 10.90 0.00 0.00 10.90 10585.9 115382.08 0.00 0.00 115382.08 0.00
7 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) m3 76.84 6594.00 506715.02 76.84 0.00 0.00 76.84 6594 506715.02 0.00 0.00 506715.02 0.00
8 Providing ruled pointing to cursed stone masonry with lime mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost all materials, labour, usage charges of achinery, curing complete as pre specification. m2 32.50 255.00 8287.50 32.50 0.00 0.00 32.50 255 8287.50 0.00 0.00 8287.50 0.00
9 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 29.22 9340.50 272929.41 29.22 0.00 0.00 29.22 9340.5 272929.41 0.00 0.00 272929.41 0.00
10 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 17.39 11447.80 199031.45 17.39 0.00 0.00 17.39 11447.8 199031.45 0.00 0.00 199031.45 0.00
11 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 35.69 10774.40 384538.34 35.69 0.00 0.00 35.69 10774.4 384538.34 0.00 0.00 384538.34 0.00
12 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 82.57 10101.00 834064.82 82.57 0.00 0.00 82.57 10101 834064.82 0.00 0.00 834064.82 0.00
13 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. m3 228.97 266.00 60906.02 228.97 0.00 0.00 228.97 266 60906.02 0.00 0.00 60906.02 0.00
14 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. m3 856.35 474.00 405908.19 856.35 0.00 0.00 856.35 474 405908.19 0.00 0.00 405908.19 0.00
15 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier underand around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along theexternal perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. m2 531.36 118.00 62700.48 531.36 0.00 0.00 531.36 118 62700.48 0.00 0.00 62700.48 0.00
16 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 102.75 7948.00 816657.00 102.75 0.00 0.00 102.75 7948 816657.00 0.00 0.00 816657.00 0.00
17 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m2 158.72 1029.00 163322.88 158.72 0.00 0.00 158.72 1029 163322.88 0.00 0.00 163322.88 0.00
18 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specificationsM25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 7.75 9764.30 75673.33 7.75 0.00 0.00 7.75 9764.3 75673.33 0.00 0.00 75673.33 0.00
19 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.12 138074.00 16568.88 0.12 0.00 0.00 0.12 138074 16568.88 0.00 0.00 16568.88 0.00
20 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.48 98815.00 47431.20 0.48 0.00 0.00 0.48 98815 47431.20 0.00 0.00 47431.20 0.00
21 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section m 60.10 239.00 14363.90 60.10 0.00 0.00 60.10 239 14363.90 0.00 0.00 14363.90 0.00
22 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. m2 4.50 7085.00 31882.50 4.50 0.00 0.00 4.50 7085 31882.50 0.00 0.00 31882.50 0.00
23 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyderesin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 30 mm thick Both side teak m2 32.50 4043.00 131397.50 32.50 0.00 0.00 32.50 4043 131397.50 0.00 0.00 131397.50 0.00
24 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness m2 20.37 3485.00 70989.45 20.37 0.00 0.00 20.37 3485 70989.45 0.00 0.00 70989.45 0.00
25 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 2948.70 183.00 539612.10 2948.70 0.00 0.00 2948.70 183 539612.10 0.00 0.00 539612.10 0.00
26 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 63.75 6734.00 429292.50 63.75 0.00 0.00 63.75 6734 429292.50 0.00 0.00 429292.50 0.00
27 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass.Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 23.94 5719.00 136912.86 23.94 0.00 0.00 23.94 5719 136912.86 0.00 0.00 136912.86 0.00
28 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 63.75 687.00 43796.25 63.75 0.00 0.00 63.75 687 43796.25 0.00 0.00 43796.25 0.00
29 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 4.50 8276.00 37242.00 4.50 0.00 0.00 4.50 8276 37242.00 0.00 0.00 37242.00 0.00
30 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 248.70 565.00 140515.50 248.70 0.00 0.00 248.70 565 140515.50 0.00 0.00 140515.50 0.00
31 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 1425.58 253.00 360671.74 1425.58 0.00 0.00 1425.58 253 360671.74 0.00 0.00 360671.74 0.00
32 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 2016.75 100.00 201675.00 2016.75 0.00 0.00 2016.75 100 201675.00 0.00 0.00 201675.00 0.00
33 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 551.19 347.00 191262.93 551.19 0.00 0.00 551.19 347 191262.93 0.00 0.00 191262.93 0.00
34 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 83.00 64.00 5312.00 83.00 0.00 0.00 83.00 64 5312.00 0.00 0.00 5312.00 0.00
35 Polymerized plaster reinforced with glass fibre mesh m2 315.00 317.00 99855.00 315.00 0.00 0.00 315.00 317 99855.00 0.00 0.00 99855.00 0.00
36 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. m2 13.48 1229.00 16560.78 13.48 0.00 0.00 13.48 1229 16560.78 0.00 0.00 16560.78 0.00
37 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ( Volume 1 Page No 18 Item No 2.11.a) t 32.58 90464.00 2947317.12 32.58 0.00 0.00 32.58 90464 2947317.12 0.00 0.00 2947317.12 0.00
38 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile Size of Tile 600x600 mm m2 360.73 1171.00 422414.83 0.00 360.73 0.00 360.73 1171 0.00 422414.83 0.00 422414.83 0.00
39 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. m2 144.01 2848.00 410140.48 0.00 144.01 0.00 144.01 2848 0.00 410140.48 0.00 410140.48 0.00
40 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m2 58.80 885.00 52038.00 0.00 58.80 0.00 58.80 885 0.00 52038.00 0.00 52038.00 0.00
41 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. m2 49.75 5326.00 264968.50 0.00 49.75 0.00 49.75 5326 0.00 264968.50 0.00 264968.50 0.00
42 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m2 103.02 1446.00 148966.92 0.00 103.02 0.00 103.02 1446 0.00 148966.92 0.00 148966.92 0.00
43 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. m2 2.16 2085.00 4503.60 0.00 2.16 0.00 2.16 2085 0.00 4503.60 0.00 4503.60 0.00
44 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 2016.75 127.00 256127.25 0.00 2016.75 0.00 2016.75 127 0.00 256127.25 0.00 256127.25 0.00
45 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 551.19 174.00 95907.06 0.00 551.19 0.00 551.19 174 0.00 95907.06 0.00 95907.06 0.00
46 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 96.87 53.00 5288.13 0.00 96.87 0.00 96.87 53 0.00 5288.13 0.00 5288.13 0.00
47 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge m2 96.20 135.00 12987.00 0.00 96.20 0.00 96.20 135 0.00 12987.00 0.00 12987.00 0.00
48 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 96.87 139.00 13464.93 0.00 96.87 0.00 96.87 139 0.00 13464.93 0.00 13464.93 0.00
49 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos. 12.00 1015.00 12180.00 0.00 12.00 0.00 12.00 1015 0.00 12180.00 0.00 12180.00 0.00
50 Providing and fixing following fixtures to doors and windows. 0.00 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00
51 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type)(Volume 2 Page No 176 Item No. 20.34.1) Each 62.00 170.00 10540.00 0.00 62.00 0.00 62.00 170 0.00 10540.00 0.00 10540.00 0.00
52 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No A-27 Sl.No 285 ) Each 48.00 50.00 2400.00 0.00 48.00 0.00 48.00 50 0.00 2400.00 0.00 2400.00 0.00
53 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm(Volume 2 Page No 108 Item No. 12.73.1) Each 24.00 44.00 1056.00 0.00 24.00 0.00 24.00 44 0.00 1056.00 0.00 1056.00 0.00
54 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (Volume 2 Page No 107 Item No. 12.60 ) Each 24.00 1052.00 25248.00 0.00 24.00 0.00 24.00 1052 0.00 25248.00 0.00 25248.00 0.00
55 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete (Volume 2 Page No 107 Item No. 12.63) Nos 40.00 130.00 5200.00 0.00 40.00 0.00 40.00 130 0.00 5200.00 0.00 5200.00 0.00
56 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (Volume 2 Page No 107 Item No. 12.58) Nos 12.00 120.00 1440.00 0.00 12.00 0.00 12.00 120 0.00 1440.00 0.00 1440.00 0.00
FIRST FLOOR FOR GIRLS HOSTEL 0.00
1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 17.37 11562.28 200836.77 0.00 17.37 0.00 17.37 11562.278 0.00 200836.77 0.00 200836.77 0.00
2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 35.27 10882.14 383813.22 0.00 35.27 0.00 35.27 10882.144 0.00 383813.22 0.00 383813.22 0.00
3 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 78.61 10202.01 801961.23 0.00 78.61 0.00 78.61 10202.01 0.00 801961.23 0.00 801961.23 0.00
4 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 108.29 8027.48 869295.81 0.00 108.29 0.00 108.29 8027.48 0.00 869295.81 0.00 869295.81 0.00
5 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m2 135.89 1039.29 141229.12 0.00 135.89 0.00 135.89 1039.29 0.00 141229.12 0.00 141229.12 0.00
6 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specificationsM25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 10.79 9861.94 106410.36 0.00 10.79 0.00 10.79 9861.943 0.00 106410.36 0.00 106410.36 0.00
7 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.63 99803.15 62875.98 0.00 0.63 0.00 0.63 99803.15 0.00 62875.98 0.00 62875.98 0.00
8 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section m 60.00 241.39 14483.40 0.00 60.00 0.00 60.00 241.39 0.00 14483.40 0.00 14483.40 0.00
9 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyderesin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 30 mm thick Both side teak m2 34.25 4083.43 139857.48 0.00 34.25 0.00 34.25 4083.43 0.00 139857.48 0.00 139857.48 0.00
10 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness m2 20.16 3519.85 70960.18 0.00 20.16 0.00 20.16 3519.85 0.00 70960.18 0.00 70960.18 0.00
11 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 2745.00 184.83 507358.35 0.00 2745.00 0.00 2745.00 184.83 0.00 507358.35 0.00 507358.35 0.00
12 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 60.60 6801.34 412161.20 0.00 60.60 0.00 60.60 6801.34 0.00 412161.20 0.00 412161.20 0.00
13 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass.Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 30.90 5776.19 178484.27 0.00 30.90 0.00 30.90 5776.19 0.00 178484.27 0.00 178484.27 0.00
14 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 92.04 570.65 52522.63 0.00 92.04 0.00 92.04 570.65 0.00 52522.63 0.00 52522.63 0.00
15 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 1305.14 255.53 333502.42 0.00 1305.14 0.00 1305.14 255.53 0.00 333502.42 0.00 333502.42 0.00
16 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 1604.75 101.00 162079.75 0.00 1604.75 0.00 1604.75 101 0.00 162079.75 0.00 162079.75 0.00
17 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 617.51 350.47 216418.73 0.00 617.51 0.00 617.51 350.47 0.00 216418.73 0.00 216418.73 0.00
18 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 93.00 64.64 6011.52 0.00 93.00 0.00 93.00 64.64 0.00 6011.52 0.00 6011.52 0.00
19 Polymerized plaster reinforced with glass fibre mesh m2 315.00 320.17 100853.55 0.00 315.00 0.00 315.00 320.17 0.00 100853.55 0.00 100853.55 0.00
20 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification t 18.20 91368.64 1662829.69 0.00 18.20 0.00 18.20 91368.64 0.00 1662829.69 0.00 1662829.69 0.00
21 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile Size of Tile 600x600 mm m2 373.43 1182.71 441659.40 0.00 0.00 373.43 373.43 1182.71 0.00 0.00 441659.40 441659.40 0.00
22 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. m2 90.15 2876.48 259314.67 0.00 0.00 90.15 90.15 2876.48 0.00 0.00 259314.67 259314.67 0.00
23 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m2 53.40 893.85 47731.59 0.00 0.00 53.40 53.40 893.85 0.00 0.00 47731.59 47731.59 0.00
24 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. m2 23.66 5379.26 127273.29 0.00 0.00 23.66 23.66 5379.26 0.00 0.00 127273.29 127273.29 0.00
25 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m2 180.18 1460.46 263145.68 0.00 0.00 180.18 180.18 1460.46 0.00 0.00 263145.68 263145.68 0.00
26 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. m2 2.16 2105.85 4548.64 0.00 0.00 2.16 2.16 2105.85 0.00 0.00 4548.64 4548.64 0.00
27 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 1604.75 128.27 205841.28 0.00 0.00 1604.75 1604.75 128.27 0.00 0.00 205841.28 205841.28 0.00
28 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge m2 617.51 175.74 108521.21 0.00 0.00 617.51 617.51 175.74 0.00 0.00 108521.21 108521.21 0.00
29 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease,dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 91.20 53.53 4881.94 0.00 0.00 91.20 91.20 53.53 0.00 0.00 4881.94 4881.94 0.00
30 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge m2 88.72 136.35 12096.97 0.00 0.00 88.72 88.72 136.35 0.00 0.00 12096.97 12096.97 0.00
31 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.( Volume 2 Page No 47 Item No 8.33.3) m2 91.20 140.39 12803.57 0.00 0.00 91.20 91.20 140.39 0.00 0.00 12803.57 12803.57 0.00
32 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. m3 22.06 2037.17 44939.97 0.00 0.00 22.06 22.06 2037.17 0.00 0.00 44939.97 44939.97 0.00
33 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. m2 93.40 825.17 77070.88 0.00 0.00 93.40 93.40 825.17 0.00 0.00 77070.88 77070.88 0.00
34 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.( Volume 2 Page No 104 Item No 12.51) Nos. 11.00 1025.15 11276.65 0.00 0.00 11.00 11.00 1025.15 0.00 0.00 11276.65 11276.65 0.00
35 Providing and fixing following fixtures to doors and windows. 0.00 0.00 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00
36 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) Each 60.00 171.70 10302.00 0.00 0.00 60.00 60.00 171.7 0.00 0.00 10302.00 10302.00 0.00
37 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No A-27 Sl.No 285 ) Each 44.00 50.00 2200.00 0.00 0.00 44.00 44.00 50 0.00 0.00 2200.00 2200.00 0.00
38 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm Each 22.00 44.44 977.68 0.00 0.00 22.00 22.00 44.44 0.00 0.00 977.68 977.68 0.00
39 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 22.00 1062.52 23375.44 0.00 0.00 22.00 22.00 1062.52 0.00 0.00 23375.44 23375.44 0.00
40 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Nos 40.00 131.30 5252.00 0.00 0.00 40.00 40.00 131.3 0.00 0.00 5252.00 5252.00 0.00
41 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Nos 20.00 121.20 2424.00 0.00 0.00 20.00 20.00 121.2 0.00 0.00 2424.00 2424.00 0.00
TERRECE FLOOR FOR GIRLS HOSTEL 0.00
1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 1.90 11676.76 22185.84 0.000 1.90 0.00 1.900 11676.756 0.00 22185.84 0.00 22185.84 0.00
2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates m³ 4.32 10658.90 46046.44 0.000 4.32 0.00 4.32 10658.898 0.00 46046.44 0.00 46046.44 0.00
3 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 3.31 10989.89 36376.53 0.000 3.31 0.00 3.31 10989.888 0.00 36376.53 0.00 36376.53 0.00
4 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 28.54 8106.96 231372.64 0.000 28.54 0.00 28.54 8106.96 0.00 231372.64 0.00 231372.64 0.00
5 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 0.25 9959.59 2489.90 0.000 0.25 0.00 0.25 9959.586 0.00 2489.90 0.00 2489.90 0.00
6 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.05 100791.30 5039.56 0.000 0.05 0.00 0.05 100791.3 0.00 5039.56 0.00 5039.56 0.00
7 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) m2 3.25 7226.70 23486.78 0.000 3.25 0.00 3.25 7226.7 0.00 23486.78 0.00 23486.78 0.00
8 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 81.00 186.66 15119.46 0.000 81.00 0.00 81.00 186.66 0.00 15119.46 0.00 15119.46 0.00
9 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 2.70 6868.68 18545.44 0.000 2.70 0.00 2.70 6868.68 0.00 18545.44 0.00 18545.44 0.00
10 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 48.28 258.06 12459.14 0.000 48.28 0.00 48.28 258.06 0.00 12459.14 0.00 12459.14 0.00
11 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 48.28 102.00 4924.56 0.000 48.28 0.00 48.28 102 0.00 4924.56 0.00 4924.56 0.00
12 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 267.77 353.94 94774.51 0.000 267.77 0.00 267.77 353.94 0.00 94774.51 0.00 94774.51 0.00
13 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 40.00 65.28 2611.20 0.000 40.00 0.00 40.00 65.28 0.00 2611.20 0.00 2611.20 0.00
14 Polymerized plaster reinforced with glass fibre mesh m2 18.00 323.34 5820.12 0.000 18.00 0.00 18.00 323.34 0.00 5820.12 0.00 5820.12 0.00
15 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification t 1.55 92273.28 143023.58 0.000 1.55 0.00 1.55 92273.28 0.00 143023.58 0.00 143023.58 0.00
16 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 48.28 129.54 6254.19 0.000 0.00 48.28 48.28 129.54 0.00 0.00 6254.19 6254.19 0.00
17 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paintof approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Volume 2 Page No. 46 Item No 8.30) m2 267.77 177.48 47523.82 0.000 0.00 267.77 267.77 177.48 0.00 0.00 47523.82 47523.82 0.00
18 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease,dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 8.45 54.06 456.81 0.000 0.00 8.45 8.45 54.06 0.00 0.00 456.81 456.81 0.00
19 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 8.45 140.76 1189.42 0.000 0.00 8.45 8.45 140.76 0.00 0.00 1189.42 1189.42 0.00
20 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.( Volume 2 Page No 47 Item No 8.33.3) m2 2.70 141.78 382.81 0.000 0.00 2.70 2.70 141.78 0.00 0.00 382.81 382.81 0.00
21 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. m2 728.62 833.34 607188.19 0.000 0.00 728.62 728.62 833.34 0.00 0.00 607188.19 607188.19 0.00
22 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. m3 22.06 2057.34 45384.92 0.000 0.00 22.06 22.06 2057.34 0.00 0.00 45384.92 45384.92 0.00
23 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. kg 250.00 138.72 34680.00 0.000 0.00 250.00 250.00 138.72 0.00 0.00 34680.00 34680.00 0.00
24 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. m2 34.89 579.36 20213.87 0.000 0.00 34.89 34.89 579.36 0.00 0.00 20213.87 20213.87 0.00
25 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.( Volume 2 Page No 104 Item No 12.51) Nos. 1.00 1035.30 1035.30 0.000 0.00 1.00 1.00 1035.3 0.00 0.00 1035.30 1035.30 0.00
26 Providing and fixing following fixtures to doors and windows. 0.000 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00
27 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) Each 6.00 173.40 1040.40 0.000 0.00 6.00 6.00 173.4 0.00 0.00 1040.40 1040.40 0.00
28 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No A-27 Sl.No 285 ) Each 4.00 50.00 200.00 0.000 0.00 4.00 4.00 50 0.00 0.00 200.00 200.00 0.00
29 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm Each 2.00 44.88 89.76 0.000 0.00 2.00 2.00 44.88 0.00 0.00 89.76 89.76 0.00
30 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 2.00 1073.04 2146.08 0.000 0.00 2.00 2.00 1073.04 0.00 0.00 2146.08 2146.08 0.00
31 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Nos 4.00 132.60 530.40 0.000 0.00 4.00 4.00 132.6 0.00 0.00 530.40 530.40 0.00
32 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Nos 2.00 122.40 244.80 0.000 0.00 2.00 2.00 122.4 0.00 0.00 244.80 244.80 0.00
WATER SUPPLY FOR GIRLS HOSTEL 0.00
1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 50 mm nominal dia Pipes m 20.00 781.00 15620.00 0.000 0.00 20.00 20.000 781 0.00 0.00 15620.00 15620.00 0.00
2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 40 mm nominal dia Pipes m 15.00 536.00 8040.00 0.000 0.00 15.00 15.000 536 0.00 0.00 8040.00 8040.00 0.00
3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 32 mm nominal dia Pipes m 140.00 400.00 56000.00 0.000 0.00 140.00 140.000 400 0.00 0.00 56000.00 56000.00 0.00
4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal dia Pipes m 120.00 318.00 38160.00 0.000 0.00 120.00 120.000 318 0.00 0.00 38160.00 38160.00 0.00
5 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.150mm nominal dia pipes m 100.00 768.00 76800.00 0.000 0.00 100.00 100.000 768 0.00 0.00 76800.00 76800.00 0.00
6 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.110mm nominal dia pipes m 100.00 385.00 38500.00 0.000 0.00 100.00 100.000 385 0.00 0.00 38500.00 38500.00 0.00
7 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.110mm nominal dia pipes m 80.00 289.00 23120.00 0.000 0.00 80.00 80.000 289 0.00 0.00 23120.00 23120.00 0.00
8 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. m 250.00 568.00 142000.00 0.000 0.00 250.00 250.000 568 0.00 0.00 142000.00 142000.00 0.00
9 Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 40 mm dia GM (Copper alloy) Gate valves Each 8.00 1500.00 12000.00 0.000 0.00 8.00 8.000 1500 0.00 0.00 12000.00 12000.00 0.00
10 Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 32 mm dia GM (Copper alloy) Gate valves Each 8.00 1338.00 10704.00 0.000 0.00 8.00 8.000 1338 0.00 0.00 10704.00 10704.00 0.00
11 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. No 47.00 725.00 34075.00 0.000 0.00 47.00 47.000 725 0.00 0.00 34075.00 34075.00 0.00
12 Providing and fixing brass bib cock of approved quality : 20 mm nominal bore No 47.00 305.00 14335.00 0.000 0.00 47.00 47.000 305 0.00 0.00 14335.00 14335.00 0.00
13 Providing and fixing Wall spout with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy No 13.00 1323.00 17199.00 0.000 0.00 13.00 13.000 1323 0.00 0.00 17199.00 17199.00 0.00
14 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150mm diameter No. 13.00 279.00 3627.00 0.000 0.00 13.00 13.000 279 0.00 0.00 3627.00 3627.00 0.00
15 Providing and fixing Wall Mixer Non Telephonic made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a)Economy No 13.00 3054.00 39702.00 0.000 0.00 13.00 13.000 3054 0.00 0.00 39702.00 39702.00 0.00
16 Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 g No 8.00 314.00 2512.00 0.000 0.00 8.00 8.000 314 0.00 0.00 2512.00 2512.00 0.00
17 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. m 10.00 313.00 3130.00 0.000 0.00 10.00 10.000 313 0.00 0.00 3130.00 3130.00 0.00
18 Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks Each 20.00 323.00 6460.00 0.000 0.00 20.00 20.000 323 0.00 0.00 6460.00 6460.00 0.00
19 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. L 10000.00 9.00 90000.00 0.000 0.00 10000.00 10000.000 9 0.00 0.00 90000.00 90000.00 0.00
20 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m m 114.75 484.00 55539.00 0.000 0.00 114.75 114.750 484 0.00 0.00 55539.00 55539.00 0.00
21 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications m³ 114.75 160.00 18360.00 0.000 0.00 114.75 114.750 160 0.00 0.00 18360.00 18360.00 0.00
22 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Each 5.00 4884.00 24420.00 0.000 0.00 5.00 5.000 4884 0.00 0.00 24420.00 24420.00 0.00
23 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 8.00 4838.00 38704.00 0.000 0.00 8.00 8.000 4838 0.00 0.00 38704.00 38704.00 0.00
24 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required, White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps Each 9.00 2866.00 25794.00 0.000 0.00 9.00 9.000 2866 0.00 0.00 25794.00 25794.00 0.00
25 Providing and fixing unplasticised PVC connection pipe with brass unions : 20 mm nominal bore No 9.00 110.00 990.00 0.000 0.00 9.00 9.000 110 0.00 0.00 990.00 990.00 0.00
26 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 4.00 47.00 188.00 0.000 0.00 4.00 4.000 47 0.00 0.00 188.00 188.00 0.00
27 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors : * 100 mm inlet and 75 mm outlet * Hubless centrifugally cast (spun) iron epoxy coated inside & outside as perr IS : 15905 Each 36.00 475.00 17100.00 0.000 0.00 36.00 36.000 475 0.00 0.00 17100.00 17100.00 0.00
28 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. Each 15.00 5454.00 81810.00 0.000 0.00 15.00 15.000 5454 0.00 0.00 81810.00 81810.00 0.00
29 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm Each 10.00 1726.00 17260.00 0.000 0.00 10.00 10.000 1726 0.00 0.00 17260.00 17260.00 0.00
ELECTRICAL FOR GIRLS HOSTEL 0.00
1 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 0.00 0.00 0.00 0.00
2 Supplying heavy gauge PVCConduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 0.00 0.00 0.00 0.00
3 Supplying And Fixing Metal Fan Box with Round Hook. no 72.00 117.00 8424.00 0.000 0.00 72.00 72.000 117 0.00 0.00 8424.00 8424.00 0.00
4 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. 0.00 0.00 0.00 0.00 0.00
Short point upto 3Mtr from tapping point to out let via switch box Point 96.00 269.00 25824.00 0.000 0.00 96.00 96.000 269 0.00 0.00 25824.00 25824.00 0.00
Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box Point 128.00 379.00 48512.00 0.000 0.00 128.00 128.000 379 0.00 0.00 48512.00 48512.00 0.00
Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box Point 225.00 555.00 124875.00 0.000 0.00 225.00 225.000 555 0.00 0.00 124875.00 124875.00 0.00
5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 0.00 0.00 0.00 0.00 0.00
6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 0.00 0.00 0.00 0.00 0.00
7 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 0.00 0.00 0.00 0.00 0.00
8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 0.00 0.00 0.00 0.00 0.00
9 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 0.00 0.00 0.00 0.00 0.00
10 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 0.00 0.00 0.00 0.00 0.00
11 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
12 Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 26.00 1492.00 38792.00 0.000 0.00 26.00 26.000 1492 0.00 0.00 38792.00 38792.00 0.00
13 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
14 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
17 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>1301m/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
18 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia no 6.00 3510.00 21060.00 0.000 0.00 6.00 6.000 3510 0.00 0.00 21060.00 21060.00 0.00
20 GI/Copper strips for grounding connections, using necessary fixing materials as required. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
21 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
22 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 72.00 171.00 12312.00 0.000 0.00 72.00 72.000 171 0.00 0.00 12312.00 12312.00 0.00
23 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Each 26.00 492.00 12792.00 0.000 0.00 26.00 26.000 492 0.00 0.00 12792.00 12792.00 0.00
24 Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
25 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 6 162 972 0.000 0.00 6.00 6.000 162 0.00 0.00 972.00 972.00 0.00
26 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
27 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
28 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. Each 1.00 9255.00 9255.00 0.000 0.00 1.00 1.000 9255 0.00 0.00 9255.00 9255.00 0.00
29 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy Each 1.00 9315.00 9315.00 0.000 0.00 1.00 1.000 9315 0.00 0.00 9315.00 9315.00 0.00
30 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. Each 1.00 5705.00 5705.00 0.000 0.00 1.00 1.000 5705 0.00 0.00 5705.00 5705.00 0.00
31 Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer Each 3.00 840.00 2520.00 0.000 0.00 3.00 3.000 840 0.00 0.00 2520.00 2520.00 0.00
32 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 6.00 515.00 3090.00 0.000 0.00 6.00 6.000 515 0.00 0.00 3090.00 3090.00 0.00
33 Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
34 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
35 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
UPS and Batteries 0.00
40 Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
41 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
Providing 4 Kg Fire Extinguisher Powder Based 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
42 Supply and installation of 4kg Stored Pressure Type, Pressure Guage, Gross Weight 7.4Kg, empty weight 3.4 Kg, Can Height 480 MM, Diameter 160 MM, Discharge Time less than 13 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, Can construction Deep drawn & Co., Mig welded, valve Construciton Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60 MM, IS 15683 and CE Approved 5 years warranty. with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor / MS brackets & accessories if it is fixing on wall,, labour, usage charges of machinery complete as per specifications. complete Each 6 3350 20100 0.000 0.00 6.00 6.000 3350 0.00 0.00 20100.00 20100.00 0.00
STAFF QUARTERS GROUND FLOOR 0.00
1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter includingdressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage ofmachinery & other appurtenances required to complete the work.In all kinds of soils upto 300 mm depth m³ 80.95 95.00 7690.25 80.95 0.00 0.00 80.95 95 7690.25 0.00 0.00 7690.25 0.00
2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m m³ 264.54 102.00 26982.67 264.54 0.00 0.00 264.54 102 26982.67 0.00 0.00 26982.67 0.00
3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.In ordinary/soft rock without blasting upto 1.5 m depth m³ 396.80 363.00 144039.85 396.80 0.00 0.00 396.80 363 144039.85 0.00 0.00 144039.85 0.00
4 Providing and laying in position Cement Concrete for levelling course for all works in foundation.The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. m³ 124.85 5918.00 738862.30 124.85 0.00 0.00 124.85 5918 738862.30 0.00 0.00 738862.30 0.00
5 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 151.56 6725.16 1019265.25 151.56 0.00 0.00 151.56 6725.16 1019265.25 0.00 0.00 1019265.25 0.00
6 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 9.39 10585.90 99401.60 9.39 0.00 0.00 9.39 10585.9 99401.60 0.00 0.00 99401.60 0.00
7 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) m3 128.94 6594.00 850230.36 128.94 0.00 0.00 128.94 6594 850230.36 0.00 0.00 850230.36 0.00
8 Providing ruled pointing to cursed stone masonry with lime mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost all materials, labour, usage charges of achinery, curing complete as pre specification. m2 80.89 255.00 20626.95 80.89 0.00 0.00 80.89 255 20626.95 0.00 0.00 20626.95 0.00
9 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 25.51 9340.50 238234.38 25.51 0.00 0.00 25.51 9340.5 238234.38 0.00 0.00 238234.38 0.00
10 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 15.97 11447.80 182821.37 15.97 0.00 0.00 15.97 11447.8 182821.37 0.00 0.00 182821.37 0.00
11 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 31.63 10774.40 340794.27 31.63 0.00 0.00 31.63 10774.4 340794.27 0.00 0.00 340794.27 0.00
12 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 59.53 10101.00 601373.14 59.53 0.00 0.00 59.53 10101 601373.14 0.00 0.00 601373.14 0.00
13 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. m3 264.54 266.00 70366.58 264.54 0.00 0.00 264.54 266 70366.58 0.00 0.00 70366.58 0.00
14 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. m3 629.53 474.00 298397.30 629.53 0.00 0.00 629.53 474 298397.30 0.00 0.00 298397.30 0.00
15 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier underand around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along theexternal perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. m2 361.44 118.00 42649.92 361.44 0.00 0.00 361.44 118 42649.92 0.00 0.00 42649.92 0.00
16 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 112.14 7948.00 891288.72 112.14 0.00 0.00 112.14 7948 891288.72 0.00 0.00 891288.72 0.00
17 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m2 165.99 1029.00 170803.71 165.99 0.00 0.00 165.99 1029 170803.71 0.00 0.00 170803.71 0.00
18 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specificationsM25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 3.19 9764.30 31148.12 3.19 0.00 0.00 3.19 9764.3 31148.12 0.00 0.00 31148.12 0.00
19 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.34 138074.00 46945.16 0.00 0.00 0.34 0.34 138074 0.00 0.00 46945.16 46945.16 0.00
20 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.47 98815.00 46443.05 0.00 0.00 0.47 0.47 98815 0.00 0.00 46443.05 46443.05 0.00
21 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section m 40.00 239.00 9560.00 0.00 0.00 40.00 40.00 239 0.00 0.00 9560.00 9560.00 0.00
22 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. m2 8.82 7085.00 62489.70 0.00 0.00 8.82 8.82 7085 0.00 0.00 62489.70 62489.70 0.00
23 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyderesin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 30 mm thick Both side teak m2 22.68 4043.00 91695.24 0.00 0.00 22.68 22.68 4043 0.00 0.00 91695.24 91695.24 0.00
24 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness m2 13.44 3485.00 46838.40 0.00 0.00 13.44 13.44 3485 0.00 0.00 46838.40 46838.40 0.00
25 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 1484.40 183.00 271645.20 0.00 0.00 1484.40 1484.40 183 0.00 0.00 271645.20 271645.20 0.00
26 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 37.03 6734.00 249360.02 0.00 0.00 37.03 37.03 6734 0.00 0.00 249360.02 249360.02 0.00
27 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass.Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 4.80 5719.00 27451.20 0.00 0.00 4.80 4.80 5719 0.00 0.00 27451.20 27451.20 0.00
28 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 286.26 565.00 161736.90 0.00 0.00 286.26 286.26 565 0.00 0.00 161736.90 161736.90 0.00
29 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 1190.31 253.00 301148.43 0.00 0.00 1190.31 1190.31 253 0.00 0.00 301148.43 301148.43 0.00
30 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 1635.74 100.00 163574.00 0.00 0.00 1635.74 1635.74 100 0.00 0.00 163574.00 163574.00 0.00
31 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 723.18 347.00 250943.46 0.00 0.00 723.18 723.18 347 0.00 0.00 250943.46 250943.46 0.00
32 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 108.00 64.00 6912.00 0.00 0.00 108.00 108.00 64 0.00 0.00 6912.00 6912.00 0.00
33 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 150.00 317.00 47550.00 0.00 0.00 150.00 150.00 317 0.00 0.00 47550.00 47550.00 0.00
34 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 21.81 1229.00 26804.49 0.00 0.00 21.81 21.81 1229 0.00 0.00 26804.49 26804.49 0.00
35 Polymerized plaster reinforced with glass fibre mesh m2 29.31 90464.00 2651499.84 0.00 0.00 29.31 29.31 90464 0.00 0.00 2651499.84 2651499.84 0.00
36 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. m2 286.50 1171.00 335491.50 0.00 0.00 286.50 286.50 1171 0.00 0.00 335491.50 335491.50 0.00
37 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ( Volume 1 Page No 18 Item No 2.11.a) t 81.35 2848.00 231684.80 0.00 0.00 81.35 81.35 2848 0.00 0.00 231684.80 231684.80 0.00
38 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile Size of Tile 600x1200 mm m2 26.28 885.00 23257.80 0.00 0.00 26.28 26.28 885 0.00 0.00 23257.80 23257.80 0.00
39 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. m2 64.40 5326.00 342994.40 0.00 0.00 64.40 64.40 5326 0.00 0.00 342994.40 342994.40 0.00
40 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m2 136.46 1446.00 197321.16 0.00 0.00 136.46 136.46 1446 0.00 0.00 197321.16 197321.16 0.00
41 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. m2 1635.74 127.00 207738.98 0.00 0.00 1635.74 1635.74 127 0.00 0.00 207738.98 207738.98 0.00
42 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m2 723.18 174.00 125833.32 0.00 0.00 723.18 723.18 174 0.00 0.00 125833.32 125833.32 0.00
43 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 131.37 53.00 6962.61 0.00 0.00 131.37 131.37 53 0.00 0.00 6962.61 6962.61 0.00
44 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paintof approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 81.89 135.00 11055.15 0.00 0.00 81.89 81.89 135 0.00 0.00 11055.15 11055.15 0.00
45 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease,dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 16.00 1015.00 16240.00 0.00 0.00 16.00 16.00 1015 0.00 0.00 16240.00 16240.00 0.00
46 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge m2 48.00 170.00 8160.00 0.00 0.00 48.00 48.00 170 0.00 0.00 8160.00 8160.00 0.00
47 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.( Volume 2 Page No 104 Item No 12.51) Nos. 48.00 50.00 2400.00 0.00 0.00 48.00 48.00 50 0.00 0.00 2400.00 2400.00 0.00
48 Providing and fixing following fixtures to doors and windows. 32.00 44.00 1408.00 0.00 0.00 32.00 32.00 44 0.00 0.00 1408.00 1408.00 0.00
49 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type)(Volume 2 Page No 176 Item No. 20.34.1) Each 32.00 1052.00 33664.00 0.00 0.00 32.00 32.00 1052 0.00 0.00 33664.00 33664.00 0.00
50 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No A-27 Sl.No 285 ) Each 16.00 130.00 2080.00 0.00 0.00 16.00 16.00 130 0.00 0.00 2080.00 2080.00 0.00
51 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm(Volume 2 Page No 108 Item No. 12.73.1) Each 16.00 120.00 1920.00 0.00 0.00 16.00 16.00 120 0.00 0.00 1920.00 1920.00 0.00
STAFF QUARTERS FIRST FLOOR 0.00
1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 15.97 11562.28 184649.58 0.00 15.97 0.00 15.97 11562.278 0.00 184649.58 0.00 184649.58 0.00
2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 31.63 10547.63 333621.60 0.00 31.63 0.00 31.63 10547.632 0.00 333621.60 0.00 333621.60 0.00
3 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 59.95 10202.01 611569.69 0.00 59.95 0.00 59.95 10202.01 0.00 611569.69 0.00 611569.69 0.00
4 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 112.14 8027.48 900201.61 0.00 112.14 0.00 112.14 8027.48 0.00 900201.61 0.00 900201.61 0.00
5 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m2 157.35 1039.29 163532.28 0.00 157.35 0.00 157.35 1039.29 0.00 163532.28 0.00 163532.28 0.00
6 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specificationsM25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 3.19 9861.94 31459.60 0.00 3.19 0.00 3.19 9861.943 0.00 31459.60 0.00 31459.60 0.00
7 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.34 139454.74 47414.61 0.00 0.34 0.00 0.34 139454.74 0.00 47414.61 0.00 47414.61 0.00
8 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.47 99803.15 46907.48 0.00 0.47 0.00 0.47 99803.15 0.00 46907.48 0.00 46907.48 0.00
9 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section m 40.00 241.39 9655.60 0.00 40.00 0.00 40.00 241.39 0.00 9655.60 0.00 9655.60 0.00
10 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. m2 8.82 7155.85 63114.60 0.00 8.82 0.00 8.82 7155.85 0.00 63114.60 0.00 63114.60 0.00
11 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyderesin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 30 mm thick Both side teak m2 22.68 4083.43 92612.19 0.00 22.68 0.00 22.68 4083.43 0.00 92612.19 0.00 92612.19 0.00
12 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness m2 13.44 3519.85 47306.78 0.00 13.44 0.00 13.44 3519.85 0.00 47306.78 0.00 47306.78 0.00
13 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 1254.90 184.83 231943.17 0.00 1254.90 0.00 1254.90 184.83 0.00 231943.17 0.00 231943.17 0.00
14 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 37.03 6801.34 251853.62 0.00 37.03 0.00 37.03 6801.34 0.00 251853.62 0.00 251853.62 0.00
15 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass.Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 4.80 5776.19 27725.71 0.00 4.80 0.00 4.80 5776.19 0.00 27725.71 0.00 27725.71 0.00
16 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 68.88 570.65 39306.37 0.00 68.88 0.00 68.88 570.65 0.00 39306.37 0.00 39306.37 0.00
17 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 1190.31 255.53 304159.91 0.00 1190.31 0.00 1190.31 255.53 0.00 304159.91 0.00 304159.91 0.00
18 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 1635.74 101.00 165209.74 0.00 1635.74 0.00 1635.74 101 0.00 165209.74 0.00 165209.74 0.00
19 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 622.26 350.47 218083.46 0.00 622.26 0.00 622.26 350.47 0.00 218083.46 0.00 218083.46 0.00
20 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 93.00 64.64 6011.52 0.00 93.00 0.00 93.00 64.64 0.00 6011.52 0.00 6011.52 0.00
21 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 150.00 320.17 48025.50 0.00 150.00 0.00 150.00 320.17 0.00 48025.50 0.00 48025.50 0.00
22 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 21.81 1241.29 27072.53 0.00 21.81 0.00 21.81 1241.29 0.00 27072.53 0.00 27072.53 0.00
23 Polymerized plaster reinforced with glass fibre mesh m2 17.34 91368.64 1584332.22 0.00 17.34 0.00 17.34 91368.64 0.00 1584332.22 0.00 1584332.22 0.00
24 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. m2 286.50 1182.71 338846.42 0.00 286.50 0.00 286.50 1182.71 0.00 338846.42 0.00 338846.42 0.00
25 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ( Volume 1 Page No 18 Item No 2.11.a) t 81.35 2876.48 234001.65 0.00 81.35 0.00 81.35 2876.48 0.00 234001.65 0.00 234001.65 0.00
26 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile Size of Tile 600x1200 mm m2 26.28 893.85 23490.38 0.00 26.28 0.00 26.28 893.85 0.00 23490.38 0.00 23490.38 0.00
27 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. m2 16.93 5379.26 91070.87 0.00 16.93 0.00 16.93 5379.26 0.00 91070.87 0.00 91070.87 0.00
28 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m2 136.46 1460.46 199294.37 0.00 136.46 0.00 136.46 1460.46 0.00 199294.37 0.00 199294.37 0.00
29 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. m2 1635.74 128.27 209816.37 0.00 1635.74 0.00 1635.74 128.27 0.00 209816.37 0.00 209816.37 0.00
30 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m2 622.26 175.74 109355.97 0.00 622.26 0.00 622.26 175.74 0.00 109355.97 0.00 109355.97 0.00
31 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 131.37 53.53 7032.24 0.00 131.37 0.00 131.37 53.53 0.00 7032.24 0.00 7032.24 0.00
32 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paintof approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 81.89 136.35 11165.70 0.00 81.89 0.00 81.89 136.35 0.00 11165.70 0.00 11165.70 0.00
33 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease,dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 11.34 2037.17 23101.51 0.00 11.34 0.00 11.34 2037.17 0.00 23101.51 0.00 23101.51 0.00
34 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge m2 51.12 825.17 42182.69 0.00 51.12 0.00 51.12 825.17 0.00 42182.69 0.00 42182.69 0.00
35 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. m3 16.00 1025.15 16402.40 0.00 16.00 0.00 16.00 1025.15 0.00 16402.40 0.00 16402.40 0.00
36 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. m2 48.00 171.70 8241.60 0.00 48.00 0.00 48.00 171.7 0.00 8241.60 0.00 8241.60 0.00
37 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.( Volume 2 Page No 104 Item No 12.51) Nos. 48.00 50.00 2400.00 0.00 48.00 0.00 48.00 50 0.00 2400.00 0.00 2400.00 0.00
38 Providing and fixing following fixtures to doors and windows. 0.00 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00
39 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type)(Volume 2 Page No 176 Item No. 20.34.1) Each 32.00 44.44 1422.08 0.00 32.00 0.00 32.00 44.44 0.00 1422.08 0.00 1422.08 0.00
40 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No A-27 Sl.No 285 ) Each 32.00 1062.52 34000.64 0.00 32.00 0.00 32.00 1062.52 0.00 34000.64 0.00 34000.64 0.00
41 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm(Volume 2 Page No 108 Item No. 12.73.1) Each 16.00 131.30 2100.80 0.00 16.00 0.00 16.00 131.3 0.00 2100.80 0.00 2100.80 0.00
42 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (Volume 2 Page No 107 Item No. 12.60 ) Each 16.00 121.20 1939.20 0.00 16.00 0.00 16.00 121.2 0.00 1939.20 0.00 1939.20 0.00
STAFF QUARTERS TERRECE FLOOR 0.00
1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 1.08 11676.76 12610.90 0.000 0.00 1.08 1.080 11676.756 0.00 0.00 12610.90 12610.90 0.00
2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates m³ 4.61 10658.90 49137.52 0.000 0.00 4.61 4.61 10658.898 0.00 0.00 49137.52 49137.52 0.00
3 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 0.63 10652.06 6710.80 0.000 0.00 0.63 0.63 10652.064 0.00 0.00 6710.80 6710.80 0.00
4 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 34.08 8106.96 276285.20 0.000 0.00 34.08 34.08 8106.96 0.00 0.00 276285.20 276285.20 0.00
5 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.08 140835.48 11266.84 0.000 0.00 0.08 0.08 140835.48 0.00 0.00 11266.84 11266.84 0.00
6 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) m2 1.89 7226.70 13658.46 0.000 0.00 1.89 1.89 7226.7 0.00 0.00 13658.46 13658.46 0.00
7 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 54.00 186.66 10079.64 0.000 0.00 54.00 54.00 186.66 0.00 0.00 10079.64 10079.64 0.00
8 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). m2 1.80 6868.68 12363.62 0.000 0.00 1.80 1.80 6868.68 0.00 0.00 12363.62 12363.62 0.00
9 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 27.41 258.06 7073.42 0.000 0.00 27.41 27.41 258.06 0.00 0.00 7073.42 7073.42 0.00
10 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 27.41 102.00 2795.82 0.000 0.00 27.41 27.41 102 0.00 0.00 2795.82 2795.82 0.00
11 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 291.22 353.94 103072.64 0.000 0.00 291.22 291.22 353.94 0.00 0.00 103072.64 103072.64 0.00
12 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kg 44.00 65.28 2872.32 0.000 0.00 44.00 44.00 65.28 0.00 0.00 2872.32 2872.32 0.00
13 Polymerized plaster reinforced with glass fibre mesh m2 12.00 323.34 3880.08 0.000 0.00 12.00 12.00 323.34 0.00 0.00 3880.08 3880.08 0.00
14 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ( Volume 1 Page No 18 Item No 2.11.a) t 2.42 92273.28 223301.34 0.000 0.00 2.42 2.42 92273.28 0.00 0.00 223301.34 223301.34 0.00
15 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 27.41 129.54 3550.69 0.000 0.00 27.41 27.41 129.54 0.00 0.00 3550.69 3550.69 0.00
16 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paintof approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 291.22 177.48 51684.84 0.000 0.00 291.22 291.22 177.48 0.00 0.00 51684.84 51684.84 0.00
17 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 4.91 140.76 691.13 0.000 0.00 4.91 4.91 140.76 0.00 0.00 691.13 691.13 0.00
18 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. m2 590.31 833.34 491928.94 0.000 0.00 590.31 590.31 833.34 0.00 0.00 491928.94 491928.94 0.00
19 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. m3 11.34 2057.34 23330.24 0.000 0.00 11.34 11.34 2057.34 0.00 0.00 23330.24 23330.24 0.00
20 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. kg 200.00 138.72 27744.00 0.000 0.00 200.00 200.00 138.72 0.00 0.00 27744.00 27744.00 0.00
21 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. m2 24.96 579.36 14460.83 0.000 0.00 24.96 24.96 579.36 0.00 0.00 14460.83 14460.83 0.00
22 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.( Volume 2 Page No 104 Item No 12.51) Nos. 1.00 1035.30 1035.30 0.000 0.00 1.00 1.00 1035.3 0.00 0.00 1035.30 1035.30 0.00
23 Providing and fixing following fixtures to doors and windows. 0.00 0.000 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00
24 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type)(Volume 2 Page No 176 Item No. 20.34.1) Each 3.00 173.40 520.20 0.000 0.00 3.00 3.00 173.4 0.00 0.00 520.20 520.20 0.00
25 Providing and fixing Hold fasts M.S. for doors etc complete (Material Components P.No A-27 Sl.No 285 ) Each 3.00 50.00 150.00 0.000 0.00 3.00 3.00 50 0.00 0.00 150.00 150.00 0.00
26 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm(Volume 2 Page No 108 Item No. 12.73.1) Each 2.00 44.88 89.76 0.000 0.00 2.00 2.00 44.88 0.00 0.00 89.76 89.76 0.00
27 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (Volume 2 Page No 107 Item No. 12.60 ) Each 2.00 1073.04 2146.08 0.000 0.00 2.00 2.00 1073.04 0.00 0.00 2146.08 2146.08 0.00
28 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete (Volume 2 Page No 107 Item No. 12.63) Nos 1.00 132.60 132.60 0.000 0.00 1.00 1.00 132.6 0.00 0.00 132.60 132.60 0.00
29 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (Volume 2 Page No 107 Item No. 12.58) Nos 1.00 122.40 122.40 0.000 0.00 1.00 1.00 122.4 0.00 0.00 122.40 122.40 0.00
WATER SUPPLY 0.00
1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 50 mm nominal dia Pipes m 20.00 781.00 15620.00 0.000 0.00 20.00 20.000 781 0.00 0.00 15620.00 15620.00 0.00
2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 40 mm nominal dia Pipes m 15.00 536.00 8040.00 0.000 0.00 15.00 15.000 536 0.00 0.00 8040.00 8040.00 0.00
3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 32 mm nominal dia Pipes m 140.00 400.00 56000.00 0.000 0.00 140.00 140.000 400 0.00 0.00 56000.00 56000.00 0.00
4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal dia Pipes m 120.00 318.00 38160.00 0.000 0.00 120.00 120.000 318 0.00 0.00 38160.00 38160.00 0.00
5 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.150mm nominal dia pipes m 100.00 768.00 76800.00 0.000 0.00 100.00 100.000 768 0.00 0.00 76800.00 76800.00 0.00
6 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.110mm nominal dia pipes m 100.00 385.00 38500.00 0.000 0.00 100.00 100.000 385 0.00 0.00 38500.00 38500.00 0.00
7 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.110mm nominal dia pipes m 100.00 289.00 28900.00 0.000 0.00 100.00 100.000 289 0.00 0.00 28900.00 28900.00 0.00
8 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. m 180.00 568.00 102240.00 0.000 0.00 180.00 180.000 568 0.00 0.00 102240.00 102240.00 0.00
9 Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 40 mm dia GM (Copper alloy) Gate valves Each 8.00 1500.00 12000.00 0.000 0.00 8.00 8.000 1500 0.00 0.00 12000.00 12000.00 0.00
10 Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 32 mm dia GM (Copper alloy) Gate valves Each 8.00 1338.00 10704.00 0.000 0.00 8.00 8.000 1338 0.00 0.00 10704.00 10704.00 0.00
11 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. No 120.00 725.00 87000.00 0.000 0.00 120.00 120.000 725 0.00 0.00 87000.00 87000.00 0.00
12 Providing and fixing brass bib cock of approved quality : 20 mm nominal bore No 120.00 305.00 36600.00 0.000 0.00 120.00 120.000 305 0.00 0.00 36600.00 36600.00 0.00
13 Providing and fixing Wall spout with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy No 16.00 1323.00 21168.00 0.000 0.00 16.00 16.000 1323 0.00 0.00 21168.00 21168.00 0.00
14 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150mm diameter No. 16.00 279.00 4464.00 0.000 0.00 16.00 16.000 279 0.00 0.00 4464.00 4464.00 0.00
15 Providing and fixing Wall Mixer Non Telephonic made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a)Economy No 16.00 3054.00 48864.00 0.000 0.00 16.00 16.000 3054 0.00 0.00 48864.00 48864.00 0.00
16 Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 g No 16.00 314.00 5024.00 0.000 0.00 16.00 16.000 314 0.00 0.00 5024.00 5024.00 0.00
17 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. m 10.00 313.00 3130.00 0.000 0.00 10.00 10.000 313 0.00 0.00 3130.00 3130.00 0.00
18 Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks Each 20.00 323.00 6460.00 0.000 0.00 20.00 20.000 323 0.00 0.00 6460.00 6460.00 0.00
19 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. L 8000.00 9.00 72000.00 0.000 0.00 8000.00 8000.000 9 0.00 0.00 72000.00 72000.00 0.00
20 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m m 114.75 484.00 55539.00 0.000 0.00 114.75 114.750 484 0.00 0.00 55539.00 55539.00 0.00
21 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications m³ 114.75 160.00 18360.00 0.000 0.00 114.75 114.750 160 0.00 0.00 18360.00 18360.00 0.00
22 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Each 8.00 4884.00 39072.00 0.000 0.00 8.00 8.000 4884 0.00 0.00 39072.00 39072.00 0.00
23 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 8.00 4838.00 38704.00 0.000 0.00 8.00 8.000 4838 0.00 0.00 38704.00 38704.00 0.00
24 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required, White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps Each 16.00 2866.00 45856.00 0.000 0.00 16.00 16.000 2866 0.00 0.00 45856.00 45856.00 0.00
25 Providing and fixing unplasticised PVC connection pipe with brass unions : 20 mm nominal bore No 8.00 5618.00 44944.00 0.000 0.00 8.00 8.000 5618 0.00 0.00 44944.00 44944.00 0.00
26 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 24.00 110.00 2640.00 0.000 0.00 24.00 24.000 110 0.00 0.00 2640.00 2640.00 0.00
27 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 8.00 47.00 376.00 0.000 0.00 8.00 8.000 47 0.00 0.00 376.00 376.00 0.00
28 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors : * 100 mm inlet and 75 mm outlet * Hubless centrifugally cast (spun) iron epoxy coated inside & outside as perr IS : 15905 Each 40.00 475.00 19000.00 0.000 0.00 40.00 40.000 475 0.00 0.00 19000.00 19000.00 0.00
29 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. Each 15.00 5454.00 81810.00 0.000 0.00 15.00 15.000 5454 0.00 0.00 81810.00 81810.00 0.00
30 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm Each 16.00 1726.00 27616.00 0.000 0.00 16.00 16.000 1726 0.00 0.00 27616.00 27616.00 0.00
ELECTRICAL FOR STAFF QUARTERS 0.00
1 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 0.00 0.00 0.00 0.00
2 Supplying heavy gauge PVCConduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 0.00 0.00 0.00 0.00
3 Supplying And Fixing Metal Fan Box with Round Hook. no 48.00 117.00 5616.00 0.000 0.00 48.00 48.000 117 0.00 0.00 5616.00 5616.00 0.00
4 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. 0.00 0.00 0.00 0.00 0.00
Short point upto 3Mtr from tapping point to out let via switch box Point 112.00 269.00 30128.00 0.000 0.00 112.00 112.000 269 0.00 0.00 30128.00 30128.00 0.00
Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box Point 128.00 379.00 48512.00 0.000 0.00 128.00 128.000 379 0.00 0.00 48512.00 48512.00 0.00
Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box Point 176.00 555.00 97680.00 0.000 0.00 176.00 176.000 555 0.00 0.00 97680.00 97680.00 0.00
5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 0.00 0.00 0.00 0.00 0.00
6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 0.00 0.00 0.00 0.00 0.00
7 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 0.00 0.00 0.00 0.00 0.00
8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 0.00 0.00 0.00 0.00 0.00
9 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 0.00 0.00 0.00 0.00 0.00
10 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 0.00 0.00 0.00 0.00 0.00
11 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
12 Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 32.00 1492.00 47744.00 0.000 0.00 32.00 32.000 1492 0.00 0.00 47744.00 47744.00 0.00
13 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
14 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
17 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>1301m/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
18 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia no 6.00 3510.00 21060.00 0.000 0.00 6.00 6.000 3510 0.00 0.00 21060.00 21060.00 0.00
20 GI/Copper strips for grounding connections, using necessary fixing materials as required. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
21 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
22 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 48.00 171.00 8208.00 0.000 0.00 48.00 48.000 171 0.00 0.00 8208.00 8208.00 0.00
23 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Each 32.00 492.00 15744.00 0.000 0.00 32.00 32.000 492 0.00 0.00 15744.00 15744.00 0.00
24 Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
25 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 6 162 972 0.000 0.00 6.00 6.000 162 0.00 0.00 972.00 972.00 0.00
26 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
27 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
28 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. Each 1.00 9255.00 9255.00 0.000 0.00 1.00 1.000 9255 0.00 0.00 9255.00 9255.00 0.00
29 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy Each 1.00 9315.00 9315.00 0.000 0.00 1.00 1.000 9315 0.00 0.00 9315.00 9315.00 0.00
30 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. Each 4.00 5705.00 22820.00 0.000 0.00 4.00 4.000 5705 0.00 0.00 22820.00 22820.00 0.00
31 Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer Each 3.00 840.00 2520.00 0.000 0.00 3.00 3.000 840 0.00 0.00 2520.00 2520.00 0.00
32 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 3.00 515.00 1545.00 0.000 0.00 3.00 3.000 515 0.00 0.00 1545.00 1545.00 0.00
33 Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
34 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
35 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 0.000 0.00 0.00 0.000 0 0.00 0.00 0.00 0.00 0.00
36 Supplying.....litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate. 2kW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting. 0.000 0.00 0.00 0.00
37 Erection charges for fixing a ... litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm back plate and wiring complete with 15A 3 pin top. 0.000 0.00 0.00 0.00
SUMP,SEPTIC AND SOAK PIT 0.00
1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m m³ 83.23 102.00 8489.46 83.230 0.00 0.00 83.230 102 8489.46 0.00 0.00 8489.46 0.00
2 Providing and Filling in foundation with granite I trap broken metal 1OOmm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift. complete as per specifications. specification. m³ 7.76 2682.00 20812.32 7.760 0.00 0.00 7.760 2682 20812.32 0.00 0.00 20812.32 0.00
3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates m³ 8.23 5918.00 48705.14 8.230 0.00 0.00 8.230 5918 48705.14 0.00 0.00 48705.14 0.00
4 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m³ 1.70 7957.00 13526.90 1.700 0.00 0.00 1.700 7957 13526.90 0.00 0.00 13526.90 0.00
5 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m³ 107.74 277.00 29843.98 107.740 0.00 0.00 107.740 277 29843.98 0.00 0.00 29843.98 0.00
6 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer- in-Charge. SQM 107.74 64.00 6895.36 107.740 0.00 0.00 107.740 64 6895.36 0.00 0.00 6895.36 0.00
7 Providing Neat cement punning to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m³ 107.74 57.00 6141.18 107.740 0.00 0.00 107.740 57 6141.18 0.00 0.00 6141.18 0.00
8 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 26.30 8811.45 231741.14 26.300 0.00 0.00 26.300 8811.45 231741.14 0.00 0.00 231741.14 0.00
9 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.a. Buildings T 5.00 90464.00 452320.00 5.000 0.00 0.00 5.000 90464 452320.00 0.00 0.00 452320.00 0.00
10 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. m3 2.00 1962.00 3924.00 2.000 0.00 0.00 2.000 1962 3924.00 0.00 0.00 3924.00 0.00
11 Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. 105.54 507.00 53508.78 105.540 0.00 0.00 105.540 507 53508.78 0.00 0.00 53508.78 0.00
12 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge m3 2.35 1002.00 2354.70 2.350 0.00 0.00 2.350 1002 2354.70 0.00 0.00 2354.70 0.00
15 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. m3 1.57 1192.00 1871.44 1.570 0.00 0.00 1.570 1192 1871.44 0.00 0.00 1871.44 0.00
16 Providing and laying 100mm thick side wall & bottom slab and of 600mm width for drain with opening using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 150mm spacing jointed in CM 1:3 proportion and nicely finished Including providing holes in the walls wherever necessary including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. m3 6.28 5612.00 35243.36 6.280 0.00 0.00 6.280 5612 35243.36 0.00 0.00 35243.36 0.00
17 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 2 HP, Size 65x50 Head 13M, Discharge 462 LPM each 2.00 15610.00 31220.00 2.000 0.00 0.00 2.000 15610 31220.00 0.00 0.00 31220.00 0.00
SUMP,SEPTIC AND SOAK PIT 0.00
1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m m³ 83.23 102.00 8489.46 83.230 0.00 0.00 83.230 102 8489.46 0.00 0.00 8489.46 0.00
2 Providing and Filling in foundation with granite I trap broken metal 1OOmm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift. complete as per specifications. specification. m³ 7.76 2682.00 20812.32 7.760 0.00 0.00 7.760 2682 20812.32 0.00 0.00 20812.32 0.00
3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates m³ 8.23 5918.00 48705.14 8.230 0.00 0.00 8.230 5918 48705.14 0.00 0.00 48705.14 0.00
4 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m³ 1.70 7957.00 13526.90 1.700 0.00 0.00 1.700 7957 13526.90 0.00 0.00 13526.90 0.00
5 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m³ 107.74 277.00 29843.98 107.740 0.00 0.00 107.740 277 29843.98 0.00 0.00 29843.98 0.00
6 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer- in-Charge. SQM 107.74 64.00 6895.36 107.740 0.00 0.00 107.740 64 6895.36 0.00 0.00 6895.36 0.00
7 Providing Neat cement punning to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m³ 107.74 57.00 6141.18 107.740 0.00 0.00 107.740 57 6141.18 0.00 0.00 6141.18 0.00
8 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 26.30 8811.45 231741.14 26.300 0.00 0.00 26.300 8811.45 231741.14 0.00 0.00 231741.14 0.00
9 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.a. Buildings T 5.00 90464.00 452320.00 5.000 0.00 0.00 5.000 90464 452320.00 0.00 0.00 452320.00 0.00
10 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. m3 2.00 1962.00 3924.00 2.000 0.00 0.00 2.000 1962 3924.00 0.00 0.00 3924.00 0.00
11 Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. 105.54 507.00 53508.78 105.540 0.00 0.00 105.540 507 53508.78 0.00 0.00 53508.78 0.00
12 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge m3 2.35 1002.00 2354.70 2.350 0.00 0.00 2.350 1002 2354.70 0.00 0.00 2354.70 0.00
15 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. m3 1.57 1192.00 1871.44 1.570 0.00 0.00 1.570 1192 1871.44 0.00 0.00 1871.44 0.00
16 Providing and laying 100mm thick side wall & bottom slab and of 600mm width for drain with opening using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 150mm spacing jointed in CM 1:3 proportion and nicely finished Including providing holes in the walls wherever necessary including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. m3 6.28 5612.00 35243.36 6.280 0.00 0.00 6.280 5612 35243.36 0.00 0.00 35243.36 0.00
17 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 2 HP, Size 65x50 Head 13M, Discharge 462 LPM each 2.00 15610.00 31220.00 2.000 0.00 0.00 2.000 15610 31220.00 0.00 0.00 31220.00 0.00
RAIN WATER HARVESTING 0.00
1 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (Volume 2 Page No. 151 Item No. 17.1) m3 4.00 1002.00 4008.00 0.000 0.00 4.00 4.000 1002 0.00 0.00 4008.00 4008.00 0.00
2 Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.(Volume 2 Page No. 151 Item No. 17.2) m3 16.00 1186.00 18976.00 0.000 0.00 16.00 16.000 1186 0.00 0.00 18976.00 18976.00 0.00
3 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.(Volume 2 Page No. 151 Item No. 17.3) m3 16.00 1192.00 19072.00 0.000 0.00 16.00 16.000 1192 0.00 0.00 19072.00 19072.00 0.00
4 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter m 333.00 291.00 96903.00 0.000 0.00 333.00 333.000 291 0.00 0.00 96903.00 96903.00 0.00
76274640.33 Add 5% tender premium 3813725.32
0.8% Consultancy Charges+18% GST ₹ 635,765.56
Procurement of Furniture, External Electrification and Transformer, RO 4000000.00
Price Variation & QA Charges 500000.00
Estimate Amount 99000000.00
Percentage 34% 31% 35% 100%
Information on litigation in which the Tenderer is involved:
Other Party/Parties Employer Details of Dispute Amount involved Remarks showing Present Status
BANKER’S CERTIFICATE
This is to certify that M/s. ………………………….. is a reputed company with a good financial standing. If the contract for this work, namely ……………………………… (Name of the work) is awarded to the above firm, we shall be able to provide overdraft/credit facilities to the extent of Rs. …………… to meet the working capital requirements for executing the above contract
Name of the Bank, Senior Bank Manger
Address:…………………………
List of Machinery
Item of Equipment Requirement Owned/ Hired/Leased Owned/ Hired/Lease and available Remarks
No. Capacity Number/Capacity Age/ Condition
Information of the works for which Tenderer has submitted Tender.
Project Name Name & Address of the Employer Name of Work Amount put to Tender in Rs lac. Specified period of completion (including/excluding Monsoon Prescribed last date of submission of tender Probable date of decision on the Tender Remarks if any.
Information of the works for which Tender acceptance letters are received.
Project Name Name & Address of the Employer Name of Work Tendered Amount in Rs lac Specified period of completion (including/excluding Monsoon Probable Date of Handing over of site
Attach letters of Acceptance received.
Information on works which are yet to be completed.
Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of Markout /Date of Handing over of site Specified period of completion (including/excluding Monsoon cost of balance works remaining Rs. in lac Probable date of completion
Attach Certificate for each work indicated above, in Format 3, obtained from the Competent Authority
Monthly Physical and Financial Progress Achieved in all Contracts which are referred to in Format 3
Names of Works Item of Work Names of Employers 2018-19 Remarks (Indicate contract reference)
January February march April May June July August September October November December
Earthwork & Embankment in cum Physical
Base Course (WMM/WBM) in cum Physical
Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical
Concrete in cum Physical
Steel in MT Physical
Others Specify Details Physical
Earthwork & Embankment in cum Physical
Base Course (WMM/WBM) in cum Physical
Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical
Concrete in cum Physical
Steel in MT Physical
Others Specify Details Physical
Earthwork & Embankment in cum Physical
Base Course (WMM/WBM) in cum Physical
Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical
Concrete in cum Physical
Steel in MT Physical
Others Specify Details Physical
Earthwork & Embankment in cum Physical
Base Course (WMM/WBM) in cum Physical
Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical
Concrete in cum Physical
Steel in MT Physical
Others Specify Details Physical
Earthwork & Embankment in cum Physical
Base Course (WMM/WBM) in cum Physical
Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical
Concrete in cum Physical
Steel in MT Physical
Others Specify Details Physical
Earthwork & Embankment in cum Physical
Base Course (WMM/WBM) in cum Physical
Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical
Concrete in cum Physical
Steel in MT Physical
Others Specify Details Physical
FORMAT FOR WORK DONE CERTIFICATE TO BE OBTAINED FROM COMPETENT AUTHORITY
has executed/ is executing(strike off which ever is not applicable) the work of .............................................
in this Organisation. The details of the work is as under:
1 Name of the Project :
2 Name of the Work :
3 Contract Amount :
4 Date of signing the Agreement :
5 Date of handing over of the Site :
Progress * : 2018-19
January February March April May June July August September October November December
Earthwork & Embankment Physical in cum :
Financial in lac :
Base Course (WMM/WBM) Physical in cum :
Financial in lac :
Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :
Financial in lac :
Others (Pl specify) Physical is cum/sqm :
Financial in lac :
Others (Pl specify) Physical :
Financial in lac :
Progress * : 2019-20
January February March April May June July August September October November December
Earthwork & Embankment Physical in cum :
Financial in lac :
Base Course (WMM/WBM) Physical in cum :
Financial in lac :
Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :
Financial in lac :
Others (Pl specify) Physical is cum/sqm :
Financial in lac :
Others (Pl specify) Physical :
Financial in lac :
Progress * : 2020-21
January February March April May June July August September October November December
Earthwork & Embankment Physical in cum :
Financial in lac :
Base Course (WMM/WBM) Physical in cum :
Financial in lac :
Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :
Financial in lac :
Others (Pl specify) Physical is cum/sqm :
Financial in lac :
Others (Pl specify) Physical :
Financial in lac :
Progress * : 2021-22
January February March April May June July August September October November December
Earthwork & Embankment Physical in cum :
Financial in lac :
Base Course (WMM/WBM) Physical in cum :
Financial in lac :
Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :
Financial in lac :
Others (Pl specify) Physical is cum/sqm :
Financial in lac :
Others (Pl specify) Physical :
Financial in lac :
Progress * : 2022-23
January February March April May June July August September October November December
Earthwork & Embankment Physical in cum :
Financial in lac :
Base Course (WMM/WBM) Physical in cum :
Financial in lac :
Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :
Financial in lac :
Others (Pl specify) Physical is cum/sqm :
Financial in lac :
Others (Pl specify) Physical :
Financial in lac :
7 Stipulated Period of Completion (including monsoon)
8 Prescribed Date of completion
9 Actual Date of Completion/ Probable Date of Completion
10 Cost of balance work (if work is in progress) :
11 Reasons if any for delay in completion, if work completion is delayed :
12 Penalty if any imposed :
13 Any other information :
* Monthwise progress shall be furnished seperately.
Date: (Authorised Signatory)
Address for correspondence:
Work executed as prime contractor (in the same name) on works of similar nature during the five years specified)
Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of Markout /Date of Handing over of site Specified period of completion (including/excluding Monsoon Actual date of completion Remarks (appreciation letter received for early completion or reasons, if there is delay in completion)
Attach Workdone Certificate for each work indicated above, in Format 3, obtained from the Competent Authority
Financial Year Total value of Civil Engineering works executed and payments received in the last five years (in Rs. lac)
Billed upto date during 2023-24
Attach Chartered Accountant's Yearwise Statements.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Debarment circular.pdf
Others - Govt Circular • 0.74 MB
Star rate.zip
Others - Star rates • 0.05 MB
loc format.pdf
Others - LOC format • 1.73 MB
Road-Bridge Spec doc.zip
Others - Specification • 1.19 MB
kw4_bid_document_wi_36607.doc
Tender Document • 3.08 MB
Building SPecification.doc
Others - Specification • 0.48 MB
Mile stone 36607.xlsx
Others - Milestone • 0.43 MB
Circular.pdf
Others - Govt Circular • 2.53 MB
electrical tech specifications.pdf
Others - Specification • 0.45 MB
Electrical works specification.doc
Others - Specification • 0.18 MB
Royalty Order.pdf
Others - Royalty • 4.03 MB
technical specifications.zip
Others - Specification • 0.27 MB
Formet 3-4.xls
Others - Format • 0.10 MB
Download all tender documents and submit your bid