Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.5 LAccepted-AOC 451 NEAR RADHA KRISHAN MANDIR VPO MAMUN PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹40.0 L+₹1,298 (0.03%)Rejected-AOC | L2 | Rejected-AOC Rejected |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
4 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer(N) Mamun
Garrison Engineer(N) Mamun PIN-145001
REPAIR/ MAINTENANCE OF E/M INSTALLATIONS BLDGS AND COMPLAINT CELLS WITH CONNECTED BLDG/ WKS UNDER AGE B/R-II OF GE (N) MAMUN
2023_MES_575000_2
GE(N)/M-55/2022-23
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer(N) Mamun
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer(N) Mamun
₹80,000
22 May 2023
16 Mar 2023
6 Apr 2023
16 Mar 2023
4 Apr 2023
23 Mar 2023
Amount
Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed.
M&L for Rendering 10mm thick cement plaster on faces of brick work , concrete in cement mortar (1:6), finished even and fair without using extra cement complete all as specified and directed.
M&L for 15mm thick cement plaster in CM 1:4 on brick masonary or other than fair faces of brick work, surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for 5mm thick cement plaster in CM 1:3 on concrete surface of ceiling, chajja etc finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections etc, including taking out peeled off plaster / concrete and making the edge line in true shape and finishing the surface smooth without using extra cement complete all as specified and directed.
M&L for breaking/dismentling, cleaning of loose concrete, replacement of corressive reinforcement, filling plain cement concrete 1:1.5:3 type A0 using 12.50mm graded stone aggregate at places like chajja , sunchades , roof projection, fascia ,beams ,columns etc including necessary scafoldings, formwork etc complete all as specified and directed. Note :- Reinforcement shall be measured and paid seperately.
M&L for two coats of white wash on newly plastered surface of ceiling including preparation of surfaces complete all as specified and directed.
M&L three coats of white wash on surface of walls including preparation of new plastered surface complete all as specified and directed.
M&L for preparing newly plastered surfaces and applying two coats of cement base paint over one coat of primer on walls complete all as specified and directed.
M&L for preparing newly plastered surfaces and applying two coats of Weatherproof Exterior Emulsion paint over one coat of primer on walls complete all as specified and directed.
M&L for two coats of oil bound distemper over a coat of chalk whiting on newly plastered surface of walls including preparation of surfaces complete all as specified and directed.
M&L for wall care putty in any layers (to obtain even and smooth surface not more than 1mm thick) on walls complete all as specified and as directed.
M&L for applying two coats of oil bound distemper after preparation of old plastered surfaces of walls including minor repair to make surface good in cement mortar 1:6 or with POP to obtain smooth surface complete all as specified and directed.
M&L for one coat of white wash including preparation old surfaces of walls etc complete all as specified and directed.
M&L for one coat of white wash including preparation old surfaces on ceilings complete all as specified and directed.
M&L for one coat of cement base paint including preparation old surfaces of walls etc including minor repair to make surface good in cement mortar 1:4 or with POP to obtain smooth surface complete all as specified and directed.
M&L for Complete removal of existing treatment from walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, mass, efflorescent salts, trading oil and greasy spots etc including minor repair to make surface good in cement mortar 1:6 or with POP to obtain smooth surface and applying two coats of interior emulsion paint complete all as specified and as directed.
all as per item No.17 but applying two coats of Weatherproof Exterior Emulsion paint after make good surface in cement mortar 1:4 and complete all as specified and as directed.
M&L for preparation old painted surface of steel or iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of Old wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed.
All as per Item No 21, but exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed.
Taking down shutter 1 Sqm to 2 Sqm and refixing in same opening safely, (including minor repairs ) complete all as specified and directed.
S&F pressed steel frames for doors/windows, made out of MS sheet 1.25mm thick of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded stone aggregate) back of chowkhats and applying two coats of synthentic enamel paint over a shop coat of primer complete all as specified and directed.
All as per item 25 but size 105x60 mm
S&F 35mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc ( divided into squares with plain chamfered or rounded , mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I complete all as specified & directed.
S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I) Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated complete all as specified and directed.
S&F Factory Made Solid PVC Moulded door Shutter With solid PVC Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelam Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F Factory Made HDF Moulded Door, 30 to 32mm thick (stiles), with raised panel design with prelam Moulded on the front face having resistance to spread of flame, termite / borer proof , water / moisture proof and fire retardant fixing in frame at site complete all as specified and directed.
S&F of Factory made single extruded WPC solid door Frames / Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers and non toxic additives fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws and resistant to spread of flame, termite / borer proof , water / moisture proof and fire retardant complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed.
S&F 100 mm Butt hinges, stainless steel, and fixed complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.
S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.
S&F continuos (piano) hinges, mild steel, bright finish or electrogalvanised size of flap 30 mm complete all as specified and directed.
S&F 100mm hasp and staples, safety type of alum anodised complete all as specified and directed.
S&F Mild steel sliding door bolts (ISI Marked) 250mm long, stove enameled black, with bright bolt not less than 12mm dia with & including a minimum of 6 bolts & nuts, four on sliding and two on staple plate complete all as specified and directed.
S&F in repairs 150 mm MS helical door spring for door closer, complete all as specified and directed.
S&F in repair Aluminium (extruded section) door closer hydraulically regulated designation no-3 , universal type , suitable foor door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and directed.
S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specifed and directed.
M&L for Preparation of new or previously untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F Box type Steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings ,hinges ,handles tarred hold fasts PCC blocks including two coats of synthetic enamel paint over a coat of primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed.
S&F factory made uPVC white colour Three track three panels sliding mitred cut and fusion welded window with two nos. glazed & one no. wire mesh panels ,(area above 1.75sqm) made of frame 116 x 45 mm & sash 46 x 62 mm both having walls thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead, uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers necessary stainless steel screws etc complete all as specified and directed . (Glass or wiremesh shall be measured paid for separately)
S&F in repair 20mm bore stainless steel, single curtain rod (walls thickness not less than 1mm) including fancy type powder coated both sides brackets, fenials etc (as per sample) suitable for single curtain rod complete all as specified and directed.
Hacking out old broken glass ( any thickness , size, quality, or description) from wooden / steel frame glazed with putty or fixed with beads, rubbish off the premises complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane complete all as specified and directed.
All as per item 48 but glass pin head type
All as per item 48 but 5.5mm thick sheet glass in squares exc 05 sqm each pane.
M&L for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature and fitting the same with necessary stainless steel nuts and bolts, including making hole supply and fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts,caps etc on the top of floor or the side of waist slab with suitable arrangement including dismantling of existing railing of any description complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections including cleat angle, powder coated aluminium snap beading for glazing/ paneling fixed with C.P. brass/ stainless steel screws, complete all as specified and directed.
S&F Powder coated aluminium grill of approved design / pattern , with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200 mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium standard section around the opening ,complete all as specified and directed.
S&F powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminum snap beading screws complete all as specified and directed.
S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium aluminium snap beading, screws complete all as specified and directed.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples complete all as specified & directed.
All as per item 56 but fixed in repair.
S&F in repair factory made 17mm thick PVC/WPC (wood plastic composit boards) sheet one side prelam sheet and other side wood nature colour for cupboard shutter of density 600 kg/cm3 with 100% termite/water proof, fire rertradent, Eco friendly and finish at all edges at level for making edges lipping using binding tape etc as in Kitchen cupboard,Cabinet etc complete all as specified /Manufacture specification and directed
S&F 100 mm size stainless steel brignt finish handle (as per sample), fixed with nut and bolt complete all as specified and directed.
S&F Stainless steel auto, zero crank hinges, fency type with concealed pattern fitted to shutters complete all as specified and directed.
S&F in repair Magnetic catcher for shutter of approved pattern fitted with suitable screws complete all as specified and directed.
Dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing) and rubish off the premises complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed or bedding layer of mortar in CM 1:4 complete all as specified and directed .
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed or bedding layer of mortar in CM (1:6) complete all as specified and directed.
All as per item No. 64 but in dado, skirting over 10mm thick screed bed or bedding layer of mortar in CM 1:4 complete all as specified and directed.
Taking up or down steel water tubing and connections including cleaning for refixing of pipe 15mm bore complete all as specified and directed.
All as per item No. 66 but 20mm bore
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed.
All as above item No.68 but fixing only complete all as specified and directed.
All as above item No.68 but 20mm bore.
All as above item No.70 but fixing only complete all as specified and directed.
S&F in repair 15mm bore dia Bib taps long nose, cast copper alloy, chromium plated fancy type ISI marked with crutch or butter fly handles screwed down screwed for iron pipe complete all as specified and directed.
S&F in repair 15mm bore dia angle valve / stop valve cast copper alloy chromium plated fancy type ISI marked with crutch or butter fly handles screwed down screwed for iron pipe complete all as specified and directed.
S&F in repair 15mm bore dia 2-in-1 angle valve cast copper alloy chromium plated fancy type ISI marked with crutch or butter fly handles screwed down screwed for iron pipe complete all as specified and directed.
S&F in repair 15mm bore dia concealed type angle valve / stop valve cast copper alloy chromium plated fancy type with long shank and cup ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F in repair 20mm bore dia gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed complete all as specified and directed
S&F in repairs Vitreous china wash basin, white flat back, size 550 x 400 mm including waste pipe , brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia waste pipe complete all as specified and directed.
S&F in repair 15mm bore dia pillar tap cast copper alloy chromium plated screwed down, high pressure screwed for iron pipe complete all specified and directed .
S&F in repair PVC waste pipe 32 mm dia for wash hand basin and urinal complete all as specified and directed.
S&F in repair PVC connection 15 mm dia & length 450 mm with PTMT nuts complete all as specified and directed.
S&F in repair S S grating 100 mm dia complete all as spd & directed .
S&F in repair PVC low level flushing cistern 10 ltr capacity including PVC connection inlet and and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thick (below or above ground level) and its removal complete all as specified and directed.
M&L for PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed.
M&L for green Marble work 15-16 mm thick (table rubbed and polished) in cooking plateform, window cill, steps, stair case trade & riser etc in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Bhaislana Zebra including demolition of old stones/tiles and removal complete all as specified and directed.
M&L for Round chamfering to the edges of marble/granite slabs complete all as specified and directed.
M&L for 17-18mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of old stones/tiles complete all as specified and directed.
M&L for Rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) two layers, Capacity 500 litres, ISI Marked including all accessories, hoisted and fixed in position all as specified in SSR Part-I including dismantling of old tank complete all as specified and directed..
S&F in repairs 20mm bore Ball brass valves, high pressure with polythene float and flynut complete, screwed down for iron pipe fixed, complete all as specified and directed.
S&F in repair 15mm bore dia gun metal globe or gate/stop valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
M&L for PCC 1:2:4 type B-0 ( using 12.5mm graded stone aggregate) padding as roof , surface finished even and smooth without using extra cement after demolition & removal of old PCC complete all as specified and directed.
M&L for cement concrete (1:2:4) type B1 ( using 20 mm graded stone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work complete all as specified & directed.
M&L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth including mixing of WPC complete all as specified & directed. (WPC measured & paid separetaly)
M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet walls to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP having a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end overlap of membrane. (d) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane/ directed by Engr-in-charge.
All as per item No.96 but on Accessible roof without applying solar reflective bituminous aluminum paint complete all as specified and directed.
M&L for PCC Terrace Tiles (250mm x 250mm x 20mm ) on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 and grouting the joints with mix of white cement & marble powder in ratio of 1:1 complete including dismantling brick tile or terracing tiles with bedding layer of mortar etc and removal complete all as specified & directed.
Taking down eaves gutters and rainwater pipes (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing and removal complete all as specified & directed.
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.
All as per item 100 but 75mm bore.
S&F PVC (SWR) 75mm bore vent cowl complete all as specified and directed.
S&F PVC (SWR) 75mm bore junction single, (Single T) equal or unequal, complete all as specified and directed.
S&F PVC (SWR) 110/75mm bore reducers, complete all as specified and directed.
S&F PVC (SWR) 110mm bore bends any radius , complete all as specified and directed.
S&F PVC (SWR) 75mm bore bends any radius with access door, complete all as specified and directed.
S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore, complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, rubbish off the premises complete all as specified and directed
M&L for Mild steel TMT bars 6mm to 8mm dia cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for reinforced cement concrete 1:1.5:3 type A-0 (using 12.5 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed.
S&F of precast cement concrete Type B0 1:2:4 (12.5mm graded stone aggregate) louvres and jallies, 25mm thick (measured solid), set in cement mortar 1:4 including all mouldings and demolition of old jallies, removal complete all as specified & directed.
Demolitin of brickwork built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles etc and removal of rubbish complete all as specified & directed.
M&L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified & directed.
M&L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:4) complete all as specified & directed.
M&L for Providing and injecting chemical emulsion for post constructional anti-termite treatment along the external walls below concrete or masonary apron using chemical emulsion @ 2.25 litre per linear meter including drilling and plugging of holes etc in apron/plinth protection complete all as specified in IS-Code 6313 Part (3) : 2001complete all as specified and directed.
M&L for Providing and injecting chemical emulsion for post constructional anti-termite treatment of soil under existing floors using chemical emulsion @ one litre per hole 300 mm apart along the junction of floor and walls, along joints in floors including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floor complete all as specified in IS code-6313 Part (3) complete all as specified and directed.
all as per item No.116 but of voids in masonry with including drilling holes at 45 degree.
S&F in repair vitreous china, squatting from Pan 'Orissa' pattern 'white' size 580mm x 440mm white with integral footrest including provision of lean concrete bedding connection to drain out pipe and to flush pipe and to flush pipe anti syphonage pipe etc complete including making good to floor where required complete all as specified & directed.
M&L for cutting chases pinning in brick work and making good to facing where required, pointing in cement and making good in CM 1:3, cutting n.exc. 10cm in girth complete all as specified and directed.
S&F in repair towel rail CP 600 mm long 15mm dia pipe of 1mm thick complete all as specified and directed.
S&F in repair grating with hole 100 mm dia of SS complete all as specified & directed.
S&F PVC shelf of PTMT fixed with and including chromium plated brass screws and wooden and plastic cleats ( min wt 300 gms) complete all as specified & directed.
S&F in repair over head shower 125mm size for 15mm bore pipe, cast copper alloy chromium plated fixed in repairs complete all as specified & directed. Make - Jaquar , Marc and Johnson
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.
S&F Roof trusses (framed), trussed, purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, hollow section square/rectangular) or flat sections) including distance pieces, cleats, MS plate, welding,bolts etc, Fe 410-W (Gde- E-250) quality-A complete all as specified & directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161- 1979 grade St.-240 complete all as specified & directed.
Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, and removal complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.60 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws as specified complete all as specified and directed.
All as per item 128 but 0.50mm thick plain pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet.
Dismantling of walls and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slab/blankets, any thickness, including cover fillets and removal complete all as specified & directed.
M&L for PVC walls Lining (super heavy) consisting of 6mm thick wood grain PVC sheet includingusive of solvent cement and fixing at site on PVC frame as per specifications and drawing duly fitted into walls complete all as specified and directed.
M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc, brusing with neat cement slurry @ 3.00 kg per sqm complete all as specified and directed.
M&L for Machine pressed precast concrete pre-laminated glossy coloured interlocking paver block any shape and conforming IS 15658-2006 of 60mm thickness M-35 grade complete all as specified & directed.
M&L for 75 mm thick PCC type C2, 1:3:6 (40mm graded stone aggregate) in Sub -base, floor and pavings etc all as specified & directed.
M&L for 20mm thick screed bed or bedding layer of mortar in CM (1:6) under floor tiles complete all as specified & directed.
M&L for Chequered endura heavy duty Industrial tiles 10mm thick (sqaure/ rectangular) area of each tile exc.0.06 sqm but not exc. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & directed.
M&L for Chequered cement concrete coloured glossy finished tiles 30cm x 30cm x 25 mm thick, set, jointed with cement and pigments and pointed in neat cement slurry in floor, including 15mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as specified & directed.
S&F in repirs 15mm bore cast copper alloy chromium plated, Single Lever Basin Mixer, (as per sample) fancy type, screwed down high pressure with or without letters hot or cold with long shank screwed for iron pipe ISI marked complete all as specified & directed.
S&F in repairs Vitreous china Urinals size 325x295x575 mm (as per sample) with inbuilt touch-free sensor (DC battery operated flushing) fixed to 15mm bore pipe ISI marked complete all as specified & directed.
S&F in repairs touch free automatic Stainless Steel Hand Dryer Size not less then 235 x 205 x 265 mm including necessary accessories and fixing arrangement complete all as specified and directed.
S&F in repairs cabinet PVC size 510 x 490 x 100 mm (as per sample) with looking mirror full openable door complete all as specified & directed.
S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated brackets double guard and railing 60cm long, complete all as specified and directed.
S&F in repair corner glass shelf assembly (as per sample) consisting of 5.5mm thick sheet glass Size not less then 300x300x70mm with chromium plated brackets double guard and railing complete all as specified and directed.
S&F in repairs Stainless Steel Tumbler Holder (as per sample) with Toothbrush Stands Fitting with screws and nails complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in concrete including taking out embedded portion, making good disturbed ground and removal complete all as specified and directed.
S&F MS in posts and struts in fencing including cutting top to shape as directed, drilling holes, notiching for wire etc, flat iron 40x6 mm fillet (for securing wire mash etc) including all necessary drilling bolting or revetting, etc and similar work conforming to Fe 410-0 or Fe-310-0 including two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
S&F Mild steel screw bolt (machine made) with hexagonal or square heads at one end screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut n exc 5 cm long (5 to 10mm dia.) complete all as specified and directed.
S&F of TMT Steel 10mm dia bar for fixing and securing chain link fencing all as specified & directed.
Dismantling fencing wire mesh, any type any description and removal complete all as specified and directed
Supply only chain link fencing of oblong wire mesh size 100x100mm with weight not less than 4 Kg/Sqm complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire and fixing with MS angle iron fencing posts complete all as specified and directed.
S&F in repairs galvanised 2 strand steel barbed wire 2.24 mm dia barded with 2mm dia wire at 75 mm spacing and straining and fixing to any type of standard rail, standard bolts including securing or tying at crossing with and provn of galvanized mild steel wire staple or steel pins complete all as specified and directed. (Each line of wire to be measured separately).
Dismantling of reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required and removal complete all as specified & directed.
M&L 200 mm bore reinforced cement concrete pipes, class NP2, laid and jointed complete with collars all as specified. & directed.
M&L for Concrete bed to drain pipes 200 bore including packing under, and haunching against the sides & surrounding of pipes after they are laid and tested; in cement conctrete type C-2, 1:3:6, using 40 mm graded stone aggregate complete all as specified & directed.
S&F in reapirs of retro reflective informatory sign board of size 1200x900 mm made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting (as per sample). Letter, symbols, borders etc. as per requrement will be as per IRC - 67 with required colour scheme on the boards with the high intensity grade A. The aluminium sheet to be riveted/ welded to stainless steel squre frame of 30x30mm and fixed on 2 Nos of 50mm dia stainless steel post with caps on top of SS grade 304. The board will be fixed & welded to the frame and fixing in ground after necessary earth work in any type soil complete all as specified & directed.
Taking down carefully unsv copper/aluminium point wiring (light/fan/Bell/socket or power) complete, including fixture and fittings such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sketch fitting etc removing materials to store for keeping in safe custody for taking credit and making good to disturb surface of wall/floor with cement mortar and finishes to match existing surface complete all as specified and directed.
M & L for point wiring using 3 x 1.5 Sqmm FRLS PVC insulated unsheathed multi stranded copper conductor cable(Phase, neutral and earth wire) drawn through and incl concealed conduit medium grade of dia not less than 20mm and 1.8mm thick and connected to common earth dolly with 1.6 mm thick cadmium plated CI/GI pressed steel sunken boxes and 3 mm thick plastic laminated sheet cover fixed with brass screws complete including cutting grooves for concealed wiring for light/fan/bell point controlled by one 1 way switch complete all as specified and directed. Note: 1. Conduit shall be fixed on surface/ceiling with necessary saddles where concealing of conduit is not feasible. 2. Connections of cable with MCBs or switch/sockets shall be done through proper size copper/brass pin/U type thimbles.
All as per Ser item No 160 abvoe but for one 5 Amp socket outlet point on same board controlled by one switch 5 Amp one way.
All as per Ser item No 160 but for one 5 Amp socket outlet points controlled by one switch 5 Amps one way on independent board.
All as per item No. 160 but for one above but one 15Amp socket point with 3x2.5Sqmm FRLS PVC insulated unsheathed multi-strand copper conductor.
M & L for point wiring using 3x1.5 Sqmm FRLS PVC insulated unsheathed/multi stranded copper conductor cable(Phase, neutral and earth wire) drawn through existing conduit and connected to common earth dolly with 1.6 mm thick cadmium plated CI/GI pressed steel sunken boxes and 3 mm thick plastic laminated sheet cover fixed with brass screws for concealed wiring for light/fan/bell point controlled by one 1way switch complete all as specified and directed. Note: 1. Connections of cable with MCBs or switch sockets shall be done through proper size copper/brass pin/U type thimbles.
All as per Ser item No 164 above but for one 5 Amp socket outlet points controlled by one switch 5 Amps one way on same board.
All as per Ser item No 164 above but for one 5 Amp socket outlet point on independent board controlled by one switch 5 Amp one way.
All as per Ser item No 164 above but for one above but one 15Amp socket point with 3x2.5Sqmm FRLS PVC insulated multi-strand copper conductor.
S & F in replacement switch piano flush button single pole one way 5 amp 240 volts, all as specified and as directed.
S & F in replacement socket outlet 2 in 1, 3 pin, 5 amps, flush type with shutters, 240 volts all as specified and as directed.
S & F in replacement socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type, 240 volts all as specified and as directed.
S & F in replacement switch 15 Amps, flush type with shutters, 240 volts all as specified and as directed.
S&F in replacement ceiling rose PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals complete all as specified and directed.
S & F in replacement stepped type electronic fan regulator flush type Socket type on the existing phenolic laminated sheet etc. not less than 100 W flush type.
S&F in replacement fancy type Lamp holder jumbo, PVC/Polycarbonate type with back plate complete all as specified and directed.
Supply and fix LED lamp 12 watts 230 volts retfrofit suitable for any type lamp holder as required.
Taking down carefully unsv copper/aluminium sub main wiring of any size including old broken steel/PVC conduit and removing materials to store for keeping in safe custody for taking credit complete all as specified.
S&F in replacement sub Main Wiring with two single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x4 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 4 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in existing PVC concealed conduit complete all as specified and directed.
Taking down unserviceable any type of Main Switch, DB's including MCBs incl wooden/GI/MS sheet board etc and removing from site and making good the disturbed surface of wall etc all as specified and as directed.
S&F in replacement SPN MCB DB 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar of rating not less than 100Amps, insulated neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete all as specified and directed.
S & F in replacement MCB TP 25 to 63 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified.
S & F in replacement MCB SPN 06 -32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified.
S & F in replacement MCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified.
S & F in repairs Energy efficient surface Mounted LED batten Luminire 18 watts 4' long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.75 mtr complete all as specified and directed. (Make : - Polycab Cat No - LD00103058 (Intenso LXS LED batten 4 feet 18 W) or equivalent in Bajaj/CG/Luke)
S&F in replacement surface mounted 10 Watt 2' box type LED batten as mirror light with wall mounting arrangment including connecting up with 3 core flexible copper conductor cable of suitable size in flexible conduit pipe of suitable size from ceiling rose to connector of LED fitting complete all as specified and directed.
S & F LED post top fitting 25 watt, powder coated aluminium die cast and spun aluminum body with clear opal diffuser, suitable for landscape lighting complete all as specified and directed.
Supply and fix or laying in trenches 25 mm bore PVC pipe heavy duty for cable protection/fixing of garden lights etc, of the following sizes including necessary tee/elbow/junction box etc. provision for cable entry if reqd in garden/post top lights complete including earth work as required complete all as specified and directed.
All as per item 186 but 20 mm bore pipe
Supply and fix in repairs or laying in trenches/on wall/poles/structures GI tubing 40 mm dia medium grade for road crossing for cable protection/fixing of post top lights etc including necessary provision for cable entry if reqd in pigmi lights pole, fixing screws as required complete all as specified and directed.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated 3 core stranded copper conductor served with inner sheathing of PVC tape PVC sheathed 2.5 sqmm nominal cross section in service connection/light connections in garden light from juction box to fittings, including taking out old unserviceable cable complete all as specified and directed.
Supply and fix in repairs cable junction boxes IP 68 protected “halogen free and weather proof” suitable for out door type ( with metric knockouts for 3 way cable entry) of incl necessary suitable size new aluminium busbar single phase with neutral system under ground electrical cable protection suitable length and thickness, provn of aluminium cable lugs for incoming & out going LT cable connections with junction box complete all as specified and directed.
M & L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected by 4 mm GI wire as earth lead by means of nuts and bolt, thimbles, check nuts, washers of GI or steel including PCC (concrete chamber) in PCC 1:3:6 type C-1 using 20 mm graded stone aggregate with fair finish internal surface with 15 mm thick plaster in CM 1:4, funnel, including charcoal dust and common salt and specified including provision of 4mm dia GI wire upto 7.5 metre long protected by 15 mm bore light grade pipe, 20 mm bore medium grade watering pipe , including all excavation and earth work and connecting the earthing to an earthing test point and to main switch board as specified and testing on completion, all as shown in electrical plate No 3 of MES SSR Part -1 (2009), complete all as specified and directed.
S&F for exhaust fan AC single phase 230V of size 300 mm sweep heavy duty with louver and connecting up including provision of flexible copper wire three core of size 23/0.0076 from ceiling rose/PVC connector to exhaust fan complete all as specified and directed.
S&F LED bollard light capacity 10watt, powder coated PDC aluminium body with opal diffuser, suitable for landscape lighting, IP-65 protection, height not less than 600mm , including PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing of bollard light complete all as specified directed.
S&F in replacement of building security light 60W luminaire, having pressure die cast aluminium housing, PC diffuser and integrated electronic driver with high efficiency, with polycarbonate cover, IP-65 protection including 32mm bore light grade GI pipe bracket, mounted on wall or roof including all accessories viz FI clamps, fasteners, nut bolt, washer etc including connecting up with 3 core flexible copper conductor cable in flexible conduit pipe of suitable size complete all as specified and directed.
Supply and fix LED flood light fitting 210 watts made in pressure die cast aluminium housing and reflector and enclosed with toughened glass with IP66 protection complete with all accessories such as LED's and electronic driver, internally prewired including necessary fixing arrangement on PCC pole by providing MS angle iron bracket of adequate length as per site requirement with MS flat iron clamp with necessary nuts, bolts and washers etc and making cable connection all as specified and directed.
Servicing of ceiling fans of capacity 1200/1400mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws of suitable size and ensuring all blades screwed properly before refixing incl replacement of PVC fan box round sheet and making electric connection with flexible copper conductor of size 3core 0.50Sqmm complete all as specified and directed. (rewinding and unserviceable parts other than specified in this item if any will be measured seperately).
Taking out burnt winding wire by cutting, cleaning slots and re-winding of AC ceiling fan motor 1400/1200mm sweep any make with super enameled colour copper winding wire of gauge 35SWG including, sleeve work, varnishing with F class insulation paper with threading complete all as specified and directed. Note:- Total weight of winding wire should not be less than 200gm. Make of winding wire: BIC/ Devidyal or equivalent make as per command approved list.
Supply only for replacement of old unserviceable gun metal bush of ceiling fan of size 1200/1400mm sweep as per existing size complete all as specified and directed.
Supply only for replacement of old unserviceable capacitor AC 440 volts 2.5/3.15 mfd with copper wire terminal incl PVC clamp complete all as specified.
Supply only ball bearing suitable for ceiling fan/exhaust fan/wall/pedestal fan any type all as directed.
Supply only for replacement of old unserviceable shackle assy kit (rubber real -01, MS split clamp -02 Nos, nut ,check nut,spring washer, bolt not less tha 6.0mm dia & split pin -02 Nos) suitable for ceiling fan 1200/1400mm sweep complete all as specified and directed.
Supply and fix down rod made of MS pipe medium grade 15mm dia of 300/600mm long duly drilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan of any sweep/type and painting to down rod with two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Supply and fix in replacement ceiling fan PVC canopy of suitable size complete all as specified and directed.
Deduct Total amount of SCHEDUL 'A' SECTION-II (SCH OF CREDIT) Rs 45,595.00 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.
KULBHUSHAN AGGARWAL
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .