REPAIR/MAINTENANCE OF OLD WATTAGE STREET LIGHT WITH ENERGY EFFICIENT LED STREET LIGHT AT DRONACHAL BHOPAL

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for laying of caste and getting out in Hard / dense soil disintegrated rock.

Returning , filling in including spreading levelling watering and well ramming in layers not exc 25 cm in soft/disintergrated rock

Removing excavated material not exc 50 mtr and depositing where directed at level not exc 1.5 m above the starting point complete all as specified and directed

M&L for clean, dry, unwashed sand filled in trenches for cushioning to cable complete all as specified. NOTE:- The depth of cushion shall be measured after punning of the sand.

Supply and laying standard size common burnt clay building bricks sub class 'B' for cable protection, laid dry complete all as specified and directed.

Taking down the existing unserviceble U/G cable from the trench including tracing out the fault with the help of megger

Relaying serviceble cable obtained from item No. 6 above after rectifying the defects. Note:- (i) Excavation / Earth work , sand & Brick shall be measured and paid seprate under relavent items.ii) Retrived bricks from site properly staked and reused as protection to U/G cable.iii)Straight through joint shall be measured and paid seprate under relevent item of schedule.

Supply & fix heat shrinkable type straight through cable joint kit for 1.1 KV grade cable complete with jointing material and accessories suitable for 10 Sqmm 2/4 core Note : (i)The suitable excavation shall done by the contractor for making the cable jointing kit and make the cable functional. (ii) Excavation, returning filling and remvoning shall be measured and paid seperately under the relevant items.

M& L for MS flat iron for fabricating of clamp of various size as required at site for mounting/fixing of brackets and junction box on pole

M&L for cutting of bituminous road/ floor for laying of pipe/cables n. exc 1.5m wide and n. exc 1.5m deep including refilling with material and watering well ramming compacting and making good with PCC complete all as specified and directed. Note-PCC shall measured and paid separately agiainst relevant item

Taking out short circuited / burnt out existing aluminium wire and supply & replace weather proof PVC insulated multi stranded copper conductor1.0 Sqmm flat / round,three core 1100 volts grade complete all as specified and directed.

Supply and Laying XLPE insulated armoured heavy duty electric under ground cable aluminum conductor 1100 volts grade in trenches/on pole through sleeves etc. of 10 Sqmm 4 Core complete all as specified and directed

S&F in replacement of GI Pipe medium grade on road/pole/wall/floor for cable protection with fixing arrangement size 40mm diacomplete all as specified and directed

M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for coping around poles , including necessary form work finishing even and smooth without using extra cement , all as specified and directed.

M&L for scratching out old bubbled paint, finishing the surface with one coat of primer (red oxide) & two coats of aluminium paint of 1st quality to street light steel tubuler poles of any height 7/9 mtr , any type (double swan, single swan) all as per site including two strips of 30 cm wide to be painted red synthetic enamele above embedded level, including pole number writting with white colour enamel paint on black colour circular base) with two coat of lime wash on pole coping all as directed by Engr-in-charge.

Supply & replace street light box of size 300 x200 x105 mm inner dimension made out of FRP sheet with weather proof hinged doors, locking arrangements horizontal / vertical operated with 6 amps MCB SP, along with provision of 04 Nos aluminium bus bar of capacity 40 Amps and including 25mm x3mm MS flat iron clamps duly painted with two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed including dismantling of existing unserviceble box.

Taking down unserviceable street light fittings of any capacity and any type complete as fixed at site.

S&F LED Street light fitting 1x 35/40W energy saving and environmental friendly long life LED street light made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and impact resistance of IK 07 alongwith electrical connection and testing complete all as directed by Engr-in-charge

S&F LED Street light fitting 1x 70 W new generation energy saving and environmental friendly long life versalite pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seprate driver compartement with IP66 protection and impact resistance of IK 07 with 10 KV built-in surge protection device complete all as directed by Engr-in-charge

S&F LED flood light fitting 1x 100W energy saving and environmental friendly long life exclusive innovative die -cast aluminium IP66 flood lightsuitable for highlighting architectural facade and general purpose lighting complete fitting with existing flood light incl taking down complete

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed wire, one twin core cable flat 6 Sqmm complete

S&F in repair of Automatic Street Light Switch Three phase with Nature Switch-03 (Dual Output) as the controlling unit for automatic switching of street lights based on LUX level of Natural light. The Sensor (Nature switch) along with suitable power contractor, MCB and Support Terminals should be enclosed in pole/wall mountable Enclosure made of Rust proof, Electric Shock proof, Termite proof and FR grade special moulding compound (Sintex make SMC Junction box) confirming to IP54. The contractor, MCB and circuit Wiring should suitable enough to take load 5 KW equally distributed over 3 phase (4 KW/Phase). The contractor rating 25 Amps (4-pole) and MCB(single pole) rating : 20-25 Amps(SP-03 Nos), complete all as specified and directed.

Taking down defective LED driver and Supply and fix LED driver 240 Volts 50 Hz suitable for 72 W LED street light fitting including testing complete

Taking down defective LED driver and Supply and fix LED driver 240 Volts 50 Hz suitable for 60 W LED street light fitting including testing complete

Taking down defective LED driver and Supply and fix LED driver 240 Volts 50 Hz suitable for 150 W LED street light fitting including testing complete

Taking down defective LED driver and Supply and fix LED driver 240 Volts 50 Hz suitable for 35 W LED street light fitting including testing complete

Taking down defective LED driver and Supply and fix LED driver 240 Volts 50 Hz suitable for 25/20 W LED street light fitting including testing complete

POONAM ELECTRIC INDUSTRY

UMESH ENTERPRISES

M/s VIKAS TRADERS

AUTOMATION AND SWITCHGEAR CONTROL

ENVIRO TECH SERVICES

M/S Shanti Enterprises

SONI ENTERPRISES