OT-74

Amount

Supplying and fixing in position of Anodized Colour coated Aluminium framed partition of approved quality as detailed below and as directed by the Engineer at site including, cost of aluminium section, beading, rubber beading, cleat angle and all materials, labour charges, lead, lift, etc., complete. i) Vertical and Horizontal posts: Colour coated Anodized Aluminium section 63x38mm of thickness 2.45mm, country wood filled al-round, verticals @ spacing of 900mm c/c (max) and horizontals at 0m, 0.90m & 2.10m (Max). ii) MDF Board or its equivalent grade board of 12mm thick both sides laminated for a height of 900mm from floor level. iii) 5mm thick frost glass for the height from 900mm to 2100mm. iv) Colour coated anodized Aluminium beading of weight not less than 0.12kg/m on both sides of the shutter.

Providing and fixing anodized aluminium Glass door, single leaf swing type with approved door closure and 5mm thick frost glass with standard accessories but not limited to Handles, locking arrangement, rubber beading, Aluminium cleat etc., complete as detailed below including cost of all materials, labour Charges, T&P's, lead, lift, etc., complete. i) Shutter Verticals : Colour coated Anodized Aluminium section 47.5x 44.5mm of 2.45mm thick - 2Nos. ii) Shutter horizontals: Colour coated Anodized Aluminium section 100x45mm of 2.45mm thick - 3Nos. iii) Shutter: Bottom shutters MDF board, 12mm thick top shutter with 5mm thick plain glass.

Supplying, fabricating and fixing in position of MS fully panelled door of single leaf of required size using, 40X40X6mm MS Angles for door frame, 30X30X5mm MS Angles for shutter frame by adopting 5Nos. horizontally, 2Nos. vertically, shutter covered with 18 Gauge MS sheet, finished neatly as directed by the Engineer at site, including cost of all materials, providing locking arrangements, holdfast, hinges, labour, lead, lift, etc., complete.

Supplying and fabricating and fixing of M.S structural works using 40mm dia M.S Pipe for hand rail horizondal and vertical supports etc., as directed by the Engineer at site including cost of all materials, labour charges, scaffolding, welding, bolts and nuts if required, lead, lift, etc., complete.

Painting the structural steel work with two coats of enamel paint of approved quality and colour over a coat of primer including cost of all materials, labour charges, scaffolding charges, brushes, lead, lift, etc., complete.

Supplying and fixing in position of PVC water tank capacity 1000 litre, sintex or equivalent make including cost of transporting, lifting, cost of all materials labour charges including fixing, lead, lift, etc., complete.

Supplying and fixing of PVC health faucets of approved quality as directed by the Engineer in charge including cost of materials, tools & plants, labour charges, lead, lift, etc., complete.

Supplying and fixing in position of 25mm dia. Gun Metal wheel valves of (Heavy duty) approved quality including cost of materials, labour charges for fixing, lead, lift etc., complete.

ARP Engineering Contractor