SPECIAL REPAIR OF BLDG NO T-179 (JCOs MEESS) OF HQ 402 (I) ARTY BDE CAMP AT NURLA MIL STN UNDER AGE (I) NIMU

Amount

Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets

Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in unframed work

M&L for 6mm Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work in wall panelling, complete all as specified. Make- Greenply

All as per item above heer-in-before but 4mm thick complete all as specified and directed by Engr-in-charge.

M&L for 6mm Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work in Ceiling, complete all as specified. Make- Greenply

M & L Plain fillets. exc. 13 & n.exc 25 Sq cm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads.

Ditto, but exc 3 & n.exc 6 Sq cm in bullnosed, splayed, chamfered or rounded on one edge or face as in bedding

M & L Particle board 18/19mm thick, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed by Engr-in-Charge.

M&L for 4mm Plywood grade BWP, type BB having 3 Nos of ply fixed with nails to timber frame complete all as specified and directed by Engr-in-Charge.

S & F Continuous (piano) hinges, 30 mm wide (when open) mild steel, bright finish or electrogalvanised complete all as specified and directed by Engr-in-Charge.

S&F Extruded brass handles, 150mm long fabricated type polished complete all as specified and directed by Engr-in-Charge.

All as per item above heer-in-before but 100mm long complete all as specified and directed by Engr-in-charge.

S & F Drawer channel not less than 40mm wide stainless steel soft close Telescopic slides 45kg capacity heavy ball bearing, smooth and effortless drawer movement, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces of any description, not exc 10 cm in width or girth with wood filler liquid transparent duly staining with oil or spirit and applying two coats of thic varnish when unconnected with other work or painted in different tint complete all as specified and directed by Engr-in-Charge.

S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified. and directed by Engr-in-Charge.

Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each (without taking off shutters from the frames) complete all as specified and directed by Engr-in-charge.

All as per item above heer-in-before but n.exc 1.5 Sqm (without taking off shutters from the frames) complete all as specified and directed by Engr-in-charge.

M&L 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed by Engr-in-charge.

M&L 2nd class hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats for doors complete all as specified and directed by Engr-in-charge.

M&L 2nd class hardwood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats for doors complete all as specified and directed by Engr-in-charge.

All as per item above heer-in-before but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, all as specified and directed by Engr-in-charge.

S&F Mild steel 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-charge.

All as per item above heer-in-before but 75mm complete all as specified and directed by Engr-in-charge.

S&F extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed by Engr-in-charge.

All as per item above heer-in-before but 100mm complete all as specified and directed by Engr-in-charge.

All as per item above heer-in-before but 100mm complete all as specified and directed by Engr-in-charge.

M&L for preparation of new wood surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of Synthetic enamel (ordinary tint) over a coat of pink primer complete all as specified and directed by Engr-in-charge.

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of Synthetic enamel (ordinary tint) complete all as specified and directed by Engr-in-charge

S & F 3mm th sheet glass, ordinary quality and glazing with wooden beading in squares n exc 0.5 sq. m in each pane all as specified and directed by Engr-in-charge.

All as per item above heer-in-before but 5.5 mm th and axc 0.5 sqm each complete all as specified and directed by Engr-in-charge.

S & F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading complete all as specified and directed by Engr-in-charge

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in charge.

M&L Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc over Screed bed or bedding layer of mortar 15 mm thick in CM 1 : 4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-charge.

M&L Non - skid Ceramic coloured tiles tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,, in floors etc over Screed bed or bedding layer of mortar 15 mm thick in CM 1 : 4, over and including 25 mm thick under layer of PCC 1 : 2 : 4 to bring the work in proper levelling set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-charge.

M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed by Engr-in-charge.

Demolition in precast cement concrete walling built in cement mortor including all quoins, arches, pillars, etc all as specified.

M&L for PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate ) block masonry with solid block exc 10cm in width and set as in wall etc in CM 1:4 complete all as specified and directed by EIC

M&L for Rendering 10mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement all as specified and directed by Engr-in-charge.

M&L for Rendering 15mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:4) and finished even and fair without using extra cement all as specified and directed by Engr-in-charge.

M&L preparing new plastered surfaces of walls and applying three coats of white wash on walls all as specified and directed by Engr-in-charge.

M&L preparing new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer all as specified and directed by Engr-in-charge.

Demolition reinforced Cement Concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for all as specified and directed by Engr-in-charge.

Formwork for Rough finished surfaces of concreteto soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr-in-Charge.

Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed by Engr-in-charge.

Dismantling water tanks Exc 500 & N.exc 1000 litres capacity complete all as specified and directed by Engr-in charge.

S&F 1000 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, two layers) hoisted and fixed in position complete all as specified complete all as specified and directed by Engr-in charge..

S & F 25mm dia nipple suitable for water tank complete all as specified and directed by Engr-in charge..

S & F in repair 25mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-in charge.

Taking up/down 20mm bore old tubing on walls and connection of size 20mm bore complete all as specified and as directed complete all as specified and directed by Engr-in charge.

All as per item above here in before but 25mm bore complete all as specified and directed by Engr-in charge.

M &L 20mm outer dia of (3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etccomplete all as specified and directed by Engr-in charge..

All as per item No 19 here but 25mm outer dia of pipe

S & F in repair 15mm dia Pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fancy type complete all as specified and directed by Engr-in charge.

S & F for 15mm PVC connection of 600mm long complete all as specified and directed by Engr-in charge.

S & F in repair 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed fancy type complete all as specified and directed by Engr-in charge.

S&F in repair 15mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in charge.

S & F in repair 15mm bore Angle valves, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in charge..

S&F in repair sinks made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in charge.

S&F in repair PVC (SWR) pipes single socketed 75mm dia pipe, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in charge.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in charge.

Taking down carefully aluminium point wiring light, fan socket or power complete fitting such as switches, ceiling rose, fan regulator, socket including light fitting etc complete with MS conduit and T/W battern and all as specified and as directed by Engineer-in-Charge.

M&L for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc One light point/one fan point controlled by one switch all as directed.

M&L for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc One 3 pin 5 amps socket outlet independent with cables 1.5 sqmm size all as directed.

M&L for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc One 3 pin 5 amp socket outlet on same board. all as directed.

All same as per item No 64 above but with conductor of size 4 sqmm (Nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm PVC insulated stranded copper conductor Cable.

Taking down carefully circuit/ submain wiring for any description including DBs complete and all as specified and as directed by Engineer-in-Charge.

Supply and laying in replacement of existing circuit/submain wiring alongwith two single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of size 10 sqmm drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws and including single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of 6 sq mm as earth wire complete all as specified & directed.

S&F in Repair switch Socket Combination 2 in 1, 3 pin, 15/16 amp flush type Universal complete all as specified and directed.

S&f Switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed.

S&f in repair socket 2 in 1, 5 pin, 5 Amp flush type complete all as specified and directed.

S & F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.

M&L in repair for ceiling rose surface Bakelite 65x50mm two to three terminal complete all as specified and as directed by Engr-in-Charge.

S&F in repair basic all purpose surface and wall mounted LED batten with polycarbonate housing and integreted electronic driver of cap 20 watt, 4 feet long, with all accessories complete all as per specified and as directed by Engr-in-Charge.

S & F in repair LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

S&F in replacement decorative wall mounting fixture in durable plastic body & designer mesh in gold finish suitable for 9 W LED lamp including all electrical connection complete all as specified and directed by Engr-in-Charge.

S&F Surface mounted spotlight in matt finish for premium aesthetics 7 watt fixture complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED luminaire High efficacy 1x1 recess LED flat panel with high brightness LED for glare-free homogenous illumination suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge. Note: The rate quoted include the cost of any frame reqd for LED light fitting in ceiling recess.

Supply and fix in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep heavy duty with, blades, frame and louvers complete.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) .

S&F in repair sheet metal powder coated versatile Double door TPN distribution board, 4 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 415 Volt, 50Hz .

S&F in repair sheet metal powder coated versatile Double door SPN distribution board, 16 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz .

M&L in repair for MCB TPN 40 to 100 Amp, 415V with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.

Dismantling and Taking down old u/s street / building sequrity Light fittings from poles, flood lights, post top lantern lights and garden lights for replacement with LED fittings all as specified and as directed by Engr in Charge.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete

M&L in repair for MCB TP 25 to 63 Amp, 415V with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.

M&L in repair for MCB SPN 63 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.

S&F in repairs to MCB SP 6-32 Amp with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all asessories such as safety valve, thermostate,NRV, connection piece etc.

Supply and fix in repairs stainless steel Kitchen Exhaust Hoods with filter (chimney) suction capacity 600 CFM , Size 1200x600x500 mm model No EH -1200 complete all as specified and as directed by Engr-in Charge.

Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6.3) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earh lead wire of size 4.0 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified.

M/S GEE AAR and SONS ENTERPRISES (BID ID -3336637)

THINLES OTZER (BID ID -3336701)

M/S STANZIN NOBROO (BID ID -3336759)

CHHIRPON BUILDERS (BID ID -3336849)

BETONG BUILDERS (BID ID -3336974)

M/S MUNEER HASSAN AKHON (BID ID -3336943)