REPAIR TO WATERPROOFING TREATMENT AND MISC WORKS TO BLDG RESTRICTED AND UNRESTRICTED AREA OF AGE BR-II UNDER GE PANAGARH

Amount

Dismantling of PVC rain water 110mm dia cement mortar & removing from site completed all as specified & directed.

Dismantling of cast iron pipes with all fittings and fixing acessories, jointed in cement mortar 50-100 mm bore, at any location, complete all as specified.

Taking up or down steel tubing and connections 15mm bore, including cleaning for refixing or removal to store complete all as specified and directed (cutting chases and making good shall be measured and paid separately).

Material and labour as in repair for 15mm dia GI tubing medium grade with all fittings to walls, ceiling or laid under floors complete all as specified and directed.

All as per item No 4.00 mentioned here-in-above but fixing only 15mm dia GI tubing medium grade with all fittings to walls, ceiling or laid under floors complete all as specified and directed.

S &F in repair vitreous china Wash down water closet (Padestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and jet, fushing cistern low or high level, 32mm dia polyethylene fush pipe etc compete all as specified.(excluding cost of flush tank)

Supply and fixing as in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, excluding flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface.

S & F in repair CP Stop valve, any description, suitable for 15mm bore pipe complete all as specified

Supply and fixing as in repair bib tap standard of PTMT of any colour high pressure screwed for iron pipe and fixed (minimum weight 90gms ) for 15mm bore pipe, complete all as specified and directed.

S&F in repair Bib taps, 15mm bore cast copper alloy with handle, chromium plated fancy type, short body with wall flange screwed down complete all as specified and directed.

S&F in repair Bib taps, 15mm bore cast copper alloy with handle, chromium plated fancy type, long body with wall flange screwed down complete all as specified and directed.

M&L as in repair consealed stop valve, 15mm bore cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, complete all as specified and directed.

S&F as in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,complete all as specified.

S&F as in repair waste coupling of PTMT(half or full threaded) (minium wt 45 gm dia of discharge pipe 32 mm complete all as specified.

S&F as in repair 15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe.

S&F in repair CP Swivel shower arm 15mm size,195 mm long with bend of 45 degree with flange of fixing with 15mm pipe (Minimum weight 40 gm) , complete all as specified and directed.

Dismantling of water tank of capacity exc. 250 & n.exc. 500 ltrs and removing to store complete all as specified and directed.

S & F of 500 ltrs capacity rotational moulded polyethylene water storage tank (Cylendrical, vertical with closed top with double layer conforming to IS-12701-96 complete including provision of all inlet, outlet, overflow and drain pipe fitting complete all as specified and directed.

S&F as in repair ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm-210gms./25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

M &L as in repair for 20mm bore PTMT float valve with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 140gms) complete all as specified and directed.

S&F as in repair for standard kit of PVC internal fittings for low level flushing cistern fixed as in repair complete all as specified and directed.

S&F as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor.

S&F as in repair Grating square with slit, with or without hole of PTMT (Minimum weight 100 gm) made in two parts for smell and mosquito proofing with 25 mm water seal fitting of shade matching to tiles/floor, fixed with white cement including matching shade pigment, complete all as specified.

Supply and fixing PVC bends plain (any radius) for 110mm bore PVC pipes complete all as specified and directed.

Supply and fixing PVC bends plain (any radius) for 75mm bore PVC pipes complete all as specified and directed.

Supply and fixing 75mm dia PVC rain water pipe fixed to wall set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc and taking down complete all as specified and directed.

Supply and fixing 110mm dia PVC rain water pipe fixed to wall set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc complete all as specified and directed.

S&F as in repair Cast iron bends (any radius), diminishing pieces or tapers (largrer bore measured), suitable for 100 mm bore spun pipes, ISI marked

S&F as in repair Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes complete all as specified.

Supply and fixing as in repair 32mm dia PVC waste pipe 800mm long all as specified.

S & F Seat cover for pedestral pan complete all as specified and directed.

Supply and fixing as in repair water tank cover 500 ltr complete all as specified and directed.

S&F in repair PTMT shelf 450 mm x 124 mm any colour with brass chromium plated screws & PVC rawl plugs (Minimum weight 300 gm), complete all as specified.

S&F Cast iron soil, waste and vent pipes, spun type 100mm ISI marked (IS:3989), in any length with or without ears, with cement joints, fixed to walls with and including mild steel clamps, complete all as specified.

S&F as in repair kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers and wastes; including bedding in cement mortar & providing cantilever brackets and west pipe, overall size 940mm x 460mm & bowl size 405mm x 354mm x 178mm, complete all as specified.

S&F as in repair kitchen plate rack made of stainless steel not less than 1mm thick with fixing acessories,bowl size 600mm x 600mm x 250mm, complete all as specified.

S&F as in repair PVC connections with non corrosive symet nuts & washer, 450 mm long suitable for 15 mm bore pipes/fittings, ISI marked, complete all as specified.

S & F Cast copper alloy, chromium plated towel rail, complete all as specified and directed.

S & F as in repair Viterous China urinals, bowl type (back or corner wall type), of size 465 x 355 x 265mm white complete including providing and fixing plugs, bedding urinal agianst wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

Drilling holes of suitable size for passing tubes of any description into or through RCC cooking platform slab with stone or brick wall etc. and the like of thickness not more than 250 mm by electric drilling machine and making good complete.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, in brick walls, complete all as specified.

Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises for minor repairs to floor in patches all as specified and directed.

Dismantaling of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.

Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

Supply only liquid water proofing compound, complete all as specified.

M &L for glazed ceramic coloured tiles in vertical surfaces of size 350x250x7mm/450x600x7mm thick quality not less than group II, straight edge, k, as on skirting , dados, walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:6 complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floors etc , over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for first quality non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.06 Sq.m but not exceeding 0.16 Sq.m, in floors & skirting etc. over & including 15 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry & pointed with grout of matching shade,including dismantling of tiles, complete, all as specifie.

M & L Sand filling under floors or in foundations including watering and consolidation and all as specified and directed..

M&L factory made PCC type M-35 paving interlocking paver block pre- polished finished, ISI marked, with grey cement & pigment, 60 mm thick, of shape approved by GE, in paths.

Materials and labour for 20mm thick black granite slab (width and length as per site requirement) bedded over including 15mm thick screed bed or bedding layers in CM 1:4 including making holes and bullnozed moulding on edges and jointed with cement slurry and pointed with white cement with the admixture of pigment to match complete.

M&L for rounding of / moulding to edge (half round) of granite stone of any description including rubbing and polishing, complete all as specified.

M&L for machine cut Kota stone slab flooring 20-22 mm thick, laid over & including 20 mm thick (average thickness) cement mortar (1:4) screed and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish) complete, all as specified.

M&L for kota stone slab 20-22 cm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick (average thickness) cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Granite finish), complete all as specified.

M&L 50 mm thick PCC 1:3:6 type C1 (20 mm graded stone aggs) as in plinth protection including finished surfaces even and smooth without using extra cement complete all as specified.

M&L for 25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate, finished rough, as in floors, complete all as specified.

M&L for fly ash brick straight or curved on plan exc 6 mtr mean redious built in CM 1:6 all as specified

M&L Brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:6 ) all as specified.

M&L for fly ash Brickwork straight or curved on plan to any radius in half brick thick walls built inin cement mortar (1:6) all as specified.

M&L rendering 15 mm thick cement plaster in cement mortar (1:3) on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) incl WPC (WPC will be measured and paid separately).

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6), complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling/chajja in cement mortar (1:3), complete all as specified.

M&L for two coats of 0il bound destemper on new wall surface including chalk whiting, preparation to distempering complete all as specified.

M & L preparing old wall surfaces and apply one coat of acrylic distemper/ distemper oil emulsion on wall surfaces complete all as specified and directed.

M&L three coats of white washing on new ceiling/chajja surfaces including preparation of complete all as specified.

M&L two coats of white washing on old ceiling/chajja surfaces including preparation of ceiling surfaces complete all as specified.

Material and labour for preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for applying two coats of distemper oil emulsion (OBD) on old wall surfaces of any description complete all as specified.

M&L for applying wall care putty @ 0.2 Kg/10 Sqm on wall surfaces complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia and over as in stirrups and spacers, binders, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over as in stirrups and spacers, binders, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for reinforced cement concrete, type A-1 (1:1½:3), (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and Chajja , columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Demolition of cement concrete reinforced(reinforcement cut as required to faciltate demolition) of any description and in any position not otherwise specifically provided as complete all as specified and directed.

Use and waste of form work to sides and soffits of floor roof beams, beam haunching , girders, bressummers lintels, cantilevers, shelves including sup-ports, edges, over hangs, etc also splays between floors and beams etc complete all as specified and directed.

Refixing of shutters of any description exceeding 1 sqm but not exc 2 sqm each in same opening after securing or easing & adjusting, complete all as specified.

M & L for hardcore of broken bricks of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M & L for cement concrete 1:4:8, Type D-2 (Using 40 mm graded stone aggregates) in foundations etc.

M & L for 100 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) finishing smooth & even with using extra cement

S & F glass dividing strips, 3mm thick and 38mm wide and inserted in position to confirm to design

M & L for 25 mm thick chequered cement concrete tiles of approved size, set, jointed and pointed using with grey cement and pigment in floors, paving etc. including the setting and jointing in neat cement paste or slurry 0.3kg/Sqm over 15 mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed and as per manufacturer instructions and direction.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.led in any mortar all as specified and directed.

Hacking out old broken glass ( any thickness, size, quality or discription) from metal/wooden frames fixed with pin, beading or oil putty

Supply and fixing 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete

S&F figured glass, 4 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified.

S & F in repair Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, complete all as specified.

Supply and fixing steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded, including one shop coat of red oxide zinc chrome primer.

S & F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F mild steel ventilator with side hung shutters, dovetailed or welded including pintol hinges, steel handles, etc. as shown with fixed type including one shop coat of red oxide zinc chrome primer, complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing at site as per specifiecation & drawing.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening, complete all as specified.

S&F factory made, 35 mm thick, panelled shutter second class hard wood, plain framed, hammer marked, (two panel ) with lock rail . The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

Supply and Fixing glazed and Skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 ,and shop coat of pink primer complete all as specified & directed.

S & F Anodised aluminium door shutters, , aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprane packing, handles 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified

S & F Anodised aluminium ,window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised etc complete all as specified

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane

S & F Solar control film 50 micron relfective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

S & F Anodised aluminium frame for doors, windows ventilators with one or more rebates including deco grill and joining cleat for fixing etc. complete shall as specified.

S&F hydraulically door closer regulated, alluminium (die cast) body, designation No. 3 universal type, suitable for door shutters upto 851 to 1000 mm in width and of weight between 60 to 80 kg, ISI marked, complete all as specified.

S & F Mortice lock, alluminium body, 4 lever, 150 mm size, vertical type with two keys complete all as specified.

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint.

M&L cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

S&F hold fasts inserted brick wall complete all as specified.

M&L for mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.

S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.

S&F Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified.

S&F Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.

Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified.

Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified.

Taking down shutters of any description exc 1sqm but not exceeding 2 Sq. m each, including stacking at directed location for refixing and/or removing to store, complete all as specified.

Disconnecting existing tanks, setting aside (or lowering if required ) for repairs, cleaning, etc, and hosting it required reconnecting and re-fixing in postion (cleaning repairing etc. messaured separately)

M&L Cleaning and removing all scale and dirt, etc from tanks Exc 250& n.exc 500 litres and from mouths of circulating pipes,etc.

M&L for framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O including dismantling complete all as specified and directed.

M&L for two coats of synthetic enamel paint over & including a coat of pink primer over new wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified.

M&L for two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces

Demolition of cement concrete (un-reinforced) roofs surfaces of any description and in any position not otherwise specifically provided for

M&L PCC 1:2:4 type B-2 (using 20m graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement, complete all as specified and directed.

M&L for providing APP based membrane course roof treatment in layers with following provisions :- (i) 20 mm thick (average) screed bed or bedding layer in CM (1:6) and finished the surface even & smooth without using extra cement on top of the roof surface. (ii) Applying one coat of bituminous primer, polymerized primer oil based coat, evenly @ 0.3 Kg/Sqm as priming coat to the prepared surfaces, till the surfaces is properly impregnated and the solvent oil in the based primer shall be allowed to evaporated completely. (iii) Applying APP based pre fabricated with non-woven polyester reinforced membrane stabilised with fibre glass strands & top with grey mineral slates, not less than 3mm thick and not less than 3 Kg/Sqm by torch application method.

Dismantling of Asbestos cement (corrugated, semi corrugated etc) of any thickness incl ridges hips valleys as in roof coverings.

M&L for 6 mm thick asbestos cement corrugated or semi- corrugated sheets in roofs, walls, etc fixed with L-type or J-type or cranked hook bolts.

All as per item No.124.00 mentioned here-in –above but except sheeting.

M&L for asbestos cement two piece serrated ridge for corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked bolts.

All as per item No.126.00 mentioned here-in- above but except ridge.

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 05mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling complete all as specified and directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling complete all as specified and directed.

Dismantling of wall or ceilling boards of any thicness including cover fillets complete all as specified and directed.

S&F for 605mm x 605mm Anodised aluminium snap grid frame work for false ceiling with all necessary aluminum angle & Tee arrangement with and incl fixing cleats screws etc all as specified.

S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

S&F for 8mm thick 'E' board (non asbestos fibre) plain building boards fixed in aluminum frame work in ceiling flat or sloping with screws complete all as specified.

SHREE LAXMI CONSTRUCTION

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

UNITED BUILDERS

UNIQUE ENTERPRISE

NATIONAL CONSTRUCTION CO

MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP

subash chander bahl