Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.9 LAccepted-AOC CITY ENTERPRISES KOTMA P O KOTMA DISTT ANUPPUR M P 484332 | KOTMA | ANUPPUR | MADHYA PRADESH | 484332 | L1 | Accepted-AOC ACCEPTED DUE TO LOWEST RATE AND FULFILLING THE TECHNICAL CRITERIA AS PER NIT. | |
| 2 | L2₹21.3 L+₹40,474 (1.94%)Rejected-Finance | L2 | Rejected-Finance REJECTED DUE TO HIGHER RATE AS PER TENDER COMMITTEE. | |
| 3 | L3₹24.2 L+₹3.3 L (15.7%)Rejected-Finance WARD NO 03 STATION ROAD PO KOTMA DIST ANUPPUR 484334 | KOTMA | ANUPPUR | MADHYA PRADESH | 484334 | L3 | Rejected-Finance REJECTED DUE TO HIGHER RATE AS PER TENDER COMMITTEE. |
Tender Value
₹28.8 L
EMD Value
₹36,100
Closing Date
5 Jan 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Staff Officer (Civil), SECL, JK Area
Office of The Staff Officer (Civil), Jamuna Kotma Area, District Anuppur, Madhya Pradesh, 484444 Contact No. 9425531831, Email Address - civil.jamunakotma(at)gmail.com.
Repairing of Road from Amadand Market to Timkitola Village Bypass under AOCP of Jamuna Kotma Area
2022_SECL_265784_1
SECL/JK/SO(C)/ETED/22-23/80 Dated 23/12/2022
Open Tender
Civil Works - Roads
Item Rate
30 days
AOCP, Jamuna Kotma Area
PLEASE REFER TENDER DOCUMENTS.
3 documents required · 3 mandatory
₹36,100
22 Feb 2023
24 Dec 2022
7 Jan 2023
24 Dec 2022
5 Jan 2023
26 Dec 2022
24 Dec 2022 - 29 Dec 2022
Amount
Wet Mix Macadam: Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density in accordance to Table No. 400-12, 400-13 and as per clause of section 406 of specifications
Providing and applying tack coat with catonic bitumen emulsion (RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications: @ 0.25 kg per sqm (normal bituminous surfaces)
Providing and applying tack coat with catonic bitumen emulsion (RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications: @ 0.35 kg per sqm (Non-bituminous surfaces) cement concrete pavement.
Bituminous Macadam: Providing and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction and as per clause 504 of specifications: Using Batch Mix Plnt of appropriate capacity and Paver finisher Hydraustatic with Sensor : for Grading I (40 mm nominal size ) bitumen content 3.4%
Bituminous Macadam: Providing and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction and as per clause 504 of specifications: Using Batch Mix Plnt of appropriate capacity and Paver finisher Hydraustatic with Sensor : for Grading II (19 mm nominal size) bitumen content 3.5%
Close Graded Premix Surfacing/Mixed Seal Surfacing: (Mechanical means using HMP of appropriate capacity not less than 75 tonnes /hour) Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) or 13.2 mm to 0.09 mm (Type-B) aggregates using penetration grade bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity & finishing to required level and grade all complete as per clause 508 of specifications: with 60/70 butumen (VG-30)
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes all complete as per clause 803 of specifications.
Excavation in Soil by Manual Means: Excavation for roadway in soil including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 metres as per clauses of section-300.
Total Impact of GST for The Purpose of CTC
ARNAV BUILDCON
M/s Yogesh Enterprises
stage.html
html • 0.04 MB
techsummary_274906.pdf
PDF • 6.74 MB
finsummary_274906.pdf
PDF • 6.11 MB
LOI_NIT_80.pdf
PDF • 4.88 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .