REPAIR/MAINTENANCE TO INTERNAL ELECTRIFICATION, GATE LIGHT, BUILDING LIGHT, SECURITY LIGHT AND CONNECTED ALLIED WORK IN MD AND OTM ACCN UNDER GE (WEST) PATHANKOT

Amount

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) on surface wiring on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators and sockets by unscrewing carefully from boards etc and making good disturbed surfaces of walls, as per existing finishes complete all as spd and directed.

M & L for point wiring for one light/one fan controlled by one switch with 1.5 PVC insulated unsheathed multistrand copper conductor FRLS cable with and including PVC concealed conduit heavy duty 20 mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked for switches and sockets , including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed.

All as per Srl Item No 2 here-in-before but for call Bell point complete all as specified and directed.

All as per Srl item No 2 here-in-before but for 5 pin 5 amps socket outlet on independent board complete all as specified and directed.

All as per Srl item No 2 here-in-before but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

M&L for point wiring with 4 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with in and including PVC concealed conduit heavy duty 20mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 4 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed.

M&L for point wiring for light / fan controlled by one switch with 1.50 sqmm PVC insulated unsheathed multistrand coper conductor FRLS cable in existing PVC concealed conduit terminated in new anodise pressed steel sunken box having thickness not less than 2 mm with 3 mm thick ISI marked bakelite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS as earth continuity conductor connected to common earth dolly including, cutting chiseling for concealed piping , including insulation test of point wiring and making good disturbed surface area and white wash/colour wash to matching with the existing colour and all as specified .

All as per Srl item No 7 here-in-before but for call Bell point complete all as specified and directed .

All as per Srl item No 7 here-in-befor but for 5 pin 5 amps socket outlet or independent board complete all as specified and directed.

All as per Srl item No 7 here-in-befor but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

M & L for point wiring with 2.50 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable in existing PVC concealed conduit terminated in new anodised pressed steel sunken box having thickness not less than 2 mm with 3 mm thick ISI marked bakelite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS as earth continuity conductor connected to common earth dolly including, cutting chiseling for concealed piping ,including insulation test of point wiring and making good disturbed surface area and white wash/colour wash to matching with the existing colour and all as specified .

M&L for Modular point wiring for one light/one fan controlled by one switch with 1.5 PVC insulated unsheathed multistrand copper conductor FRLS cable with and including PVC concealed conduit heavy duty 20 mm dia having thickness not less than 1.8 mm with all fittings including modular cover plate and modular metallic flush boxes of suitable way modular boxes and cover plates for modular switches and sockets , including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed.

All as per Srl item No 12 here-in-before but for modular call Bell point complete all as specified and directed .

All as per Srl item No 12 here-in-befor but for modular 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

All as per Srl item No 12 here-in-befor but for modular 5 pin 5 amps socket outlet or independent board complete all as specified and directed.

M&L for modular point wiring with 4 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with in and including PVC concealed conduit heavy duty 20mm dia having thickness not less than 1.8 mm with all fittings including modular cover plate and modular metallic flush boxes of suitable way modular boxes and cover plates for modular switches and sockets suitable for 5 pin 15/16 amps socket outlet ,including 4 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed.

S&F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.

S&F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed.

S&F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

S&F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.

S&F switch Bell push, flush type, 5 amp one way complete all as specified and directed by Engr-in-charge..

S&F of Bell Ding Dong, AC 230 Volts single Phase complete all as specified and directed by Engr-in-charge.

S&F Modular switch 1 way 6A, 1 module, complete all as specified and directed by Engr-in-charge.

S&F Modular switch 1 way 16A, 1 module, complete all as specified and directed by Engr-in-charge.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module,complete all as specified and directed by Engr-in-charge.

S&F Modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed by Engr-in-charge.

S&F Modular Bell push 6A 1 module, complete all as specified and directed by Engr-in-charge.

S&F Modular fan regulator 6A 1 module, complete all as specified and directed by Engr-in-charge.

S & F ceiling rose 65 x 50mm three terminals complete all as specified and directed.

Supply and fixing ceiling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified and directed.

S&F in replacement sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as required at site or directed.

S & F in replacement of CFLs with LED Lamp, B22 type ,14 watt,complete all as specified and directed.

S&F in replacement sleek LED Batten light fitting 4 feet long 1x20 W including LED tube 4 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as required at site or directed.

Supply and Fixing in replacement LED Bulkhead fitting 10 watt all as specified and directed by Engr-in-charge.

M&L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing propeller PVC type AC ventilating fans, Single phase, 230 volts 250 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.

M&L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing propeller steel body AC ventilating fans, Single phase, 230 volts 300 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.

S&F in replacement of Decorative Gate Light Moon Opal made up of high Grade unbreakable polycarbonate material suitable for and including 12/20 Watt LED Bulb complete all as specified and directed.

S&F in replacement of existing unsv sheet metal enclosure with sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 240 volts, complete with one single pole MCB of 20 amps 'C' curve complete all as specified and directed .

S&F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 6 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F in replacement MCB SP 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.

S&F in replacement MCB SPN 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.

S&F in replacement MCB SPN 240 volts any rating 63 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.

S&F in replacement sub Main Wiring with two PVC insulated unsheathed multistrand FRLS flexible copper conductor cable of size 2x6 sqmm and one PVC insulated multistrand unsheathed FRLS flexible copper conductor cable of size 6 sqmm (green colour) as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit 20mm dia complete and making good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed.

All as per srl item No 34 here-in-before but submain wiring with 2 single core 4 sqmm and one 4 sqmm as eathing lead.above but 4.00 Sqmm

S&F in replacement of old unsv sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a)MCCB FOUR POLE 100 Amps AC 415 VOLTS 25 KA=01 NO as incoming and 12 nos. MCB SP 40 Amps, C series as outgoing (Note :- (i) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(ii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(iii) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (iv) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly (v)MCCB's and MCB's should have a same make as of DB.

S&F in replacement secuirty light fitting energy saving high efficiency LED street light fitting 35 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length not less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.

M&L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 03 of SSR -2009 Part I and connecting to existing earth test point complete all as specified and directed or including testing on completion.(Note: Excavation and earth work is deemed to be included in the rates quoted).

Attending of day to day Repair and maintenance and making the continuity of supply after rectify the faults of the eletrical items such as switches, socket, regulator replacement of fuse wires , distribution boards MCB (light/Power) lamp holders (bracket/Pandents/ batten) bell/ buzzer, push button, ceiling rose capacitors and other similar electrical items/ fittings etc, including providing of small pieces of electrical wire if required of size 1.5 sqmm to 2.5 sqmm single core and length notexceding 0.50 mtrs complete all as specified and directed by Engineer-in-Charge. (Note:- (i) any accessories found unserviceable that shall be paid as supply & Fixing under respective item No. 52 to 91 of this Sch 'A' . (ii) one job only will be considered for each bldg/Qtr per day irrespective of the No of points made serviceable. (iii) The area for attending the complaints are MD and OTM Accn under AOR of the GE (W) pathankot. (iv) Each complaints attended/ rectified shall be measured as one job. (v) The contractor shall depute necessary man power on daily basis for rectifying the jobs including Sundays & holidays. (vi) Complaint slips/job card books ( as per format given by MES) in duplicate with machine made Srt. no. and date etc for recording day to day complaints & complaint register ( as per ormat given by MES) will be provided by the contractor at his own expense during currency of the contract. All complaint slips / Job cards books etc always shall be kept with JE E/m in complaint cell. (vi) Contractor /Rep will updtae the complaint register such as pastin of duplicate job slips in books , summary of qty balance in r/o CA qty on daily basis as directed. (v) Cost of taking down of defective item under ser item No 52 to 91 deemed to be included in this item

S&F Socket outlet 2 in 1, 3 pin, 5A complete in existing circuit complete as directed buy Engr-in-charge.

S&F switch piano flush button single pole one way 5 Amp 230 volts in existing circuit as directed buy Engr-in-charge.

S&F socket outlet 2 in 1, 3 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

S&F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.

S&F Switch Bell push, flush type, 5 amp one way complete all as specified and directed by Engr-in-charge..

S&F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type, 230 volts complete all as specified and directed by Engr-in-charge..

S&F Switch socket combination 2 in 1, 3 pin, 6 Amps flush type, 230 volts complete all as specified and directed by Engr-in-charge..

S&F Buzzer Ding Dong, AC 230 Volts single Phase complete all as specified and directed by Engr-in-charge.

S&F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings in existing circuit complete all as specified and directed.

S&F ceiling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified and directed.

S&F sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as required at site or directed.

S&F LED Bulkhead fitting 10 watt all as specified and directed by Engr-in-charge.

S&F Gang Box 15 Amp Switch socket combined complete all as specified and directed by Engr-in-charge.

S&F Gang Box 5 Amp Switch socket combined complete all as specified and directed by Engr-in-charge.

S&F Hylum sheet 4x4 to 4x6 inches for fixing of switchs sockets including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and directed by EIC

S&F Hylum sheet 6x10 to 8x10 inches for fixing of switchs sockets including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and directed by EIC

S&F MCB SP 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

S&F MCB SPN 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.

S&F MCB SPN 240 volts any rating from 63 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.

S&F Modular switch 1 way 6A, 1 module, complete all as specified and directed by Engr-in-charge.

S&F Modular switch 1 way 16A, 1 module, complete all as specified and directed by Engr-in-charge.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module,complete all as specified and directed by Engr-in-charge.

S&F Modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed by Engr-in-charge.

S&F Modular Bell push 6A 1 module, complete all as specified and directed by Engr-in-charge.

S&F Modular fan regulator 6A 1 module, complete all as specified and directed by Engr-in-charge.

S&F modular metal flush box 3 module, complete all as specified and directed by Engr-in-charge.

S&F modular metal flush box 4 module, complete all as specified and directed by Engr-in-charge.

S&F modular metal flush box 6 module, complete all as specified and directed by Engr-in-charge.

S&F modular metal flush box 8 module, complete all as specified and directed by Engr-in-charge.

S&F modular metal flush box 12 module, complete all as specified and directed by Engr-in-charge.

S&F modular white cover plate with frame, 3 module, complete all as specified and directed by Engr-in-charge.

S&F modular white cover plate with frame, 4 module, complete all as specified and directed by Engr-in-charge.

S&F modular white cover plate with frame, 6 module, complete all as specified and directed by Engr-in-charge.

S&F modular white cover plate with frame, 8 module, complete all as specified and directed by Engr-in-charge.

S&F modular white cover plate with frame, 12 module, complete all as specified and directed by Engr-in-charge.

S&F electric meter 10-60 Amps, class-1 having polycarbonate strong body with LCD display including meter box and electric connection with 6 Sqmm Red & Black copper wire complete all as specified and directed by Engr-in-charge. Note:- Old unserviceable meter has to be deposited in AGE E/M store yard.

S&F sleek LED Batten light fitting 4 feet long 1x20 W including LED tube 4 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as required at site or directed.

S&F bldg secuirty light fitting energy saving high efficiency LED street light fitting 25 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length not less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.

S&F LED luminaire 600 mm X 600 mm , 35/36 watt 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver holder & driver & LED lamp suitable for roof ceilingincluding connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge.

S&F decorative & cylindrical shape 6 Watt LED Bollard garden light with integrated LED driver offers comfortable soft light high durability & IP 65 complete all as specified and directed by Engr-in-Charge

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 1,30,250.00 and any other reduction if any from quoted amount.

OMKAR SHARMA AND CO

dadwal engineers

M/s Northern India Construction co

VIRAT CONSTRUCTIONS

GANDOTRA CONSTRUCTION CO

Malpotra Enterprises

M/s. Ram Nath Conatructions