CONSTRUCTION OF TOILET PATH WAY AND FOUNTAIN TANK AT ACD.

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

Address for correspondence:

PAN No.:

Contact details

Registered Contractor

Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs

I.T Returns for past 03 years

Related Document to be Uploaded to eProcurement Portal

Average annual financial turn over during the last 3 years, ending financial year 31st March 2024 [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rupees

Audited Report duly certified by the Auditor to be enclosed to support the turn over

ESI & PF Nos and GST Nos. with proof

Related Document to be Uploaded to eProcurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the final date of submission of tender.

Related Document to be Uploaded to eProcurement Portal

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please Enter details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please Enter details for Work No 2

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please Enter details for Work No 3

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

DECLARATION

DECLARATION

Related Document to be Uploaded to eProcurement Portal

Specification

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing etc., (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m with all labour, tools & tackles, plant & machinery, hire & fuel charges etc.,all complete as directed by Engineer-incharge.

Demolishing cement concrete of any description in grades (1:2:4) or rich mix manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from naturalsources : 4 graded stone aggregate 20 mm nominal size

Supplying, mixing and placing in position plain cement concrete 1:4:8 (1 cement : 4 sand : 8 graded aggregate of 40 mm nominal size) including Vibrating/consolidation and curing for plinth, cills, bed blocks and coping etc all complete as directed by Engineer-In-Charge.

Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in positionwith cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete.

Supplying, straightening, fabricating and fixing steel reinforcement of HYSD TMT bars of not less than Fe 500 conforming to IS 1786 for all concrete reinforcment members / works including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note : Only authorized laps, chairs etc. shall be considered for measurement.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing precoated galvanised iron i.e Pre-Painted Galvalume profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces/ridge pieces etc., excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Painting Steel surfaces of any description with two coats of synthetic enamel paint of approved colour,brand and manufacture to give an even shade, including preparation of surface by rubbing with fine grade of abrasive paper to ensure smooth etc., all complete as directed by the Engineer-in-Charge.

Brick work with 230mm/115mm thick common burnt clay machine moulded modular bricks of class designation 7.5 in brick work above plinth level including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).

Plastering to external brick/block wall with 18 mm cement plaster in two coats under layer 12 mm thick cement plaster on the rough side with cement mortor 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).including leveling,curing and making the level smooth and at all heights, work complete as per direction of Engineer-in-charge.

Plastering to internal brick/block wall with 15 mm thick on the rough side of single or half brick wall of cemnet mortor (1:4) including leveling,curing and making the level smooth and at all heights, plaster drip course/ groove in plastered surface or moulding to R.C.C. projections and execute the work complete as per direction of Engineer-in-charge.

Providing and fixing Ceramic glazed wall tiles(Light/dark shade) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, colours, shades over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including dismantling of existing tiles and pointing in white cement mixed with pigment of matching shade of any size as approved by Engineer-in-Charge.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in approved colours, shades, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including dismantling of existing tiles and pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing Concealed Chlorinated Polyvinyl Chloride (CPVC) pipes of approved brand, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing, necessary reducers, tank adaptors etc. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls etc as per direction of Engineer in Charge. Make : Supreme , Astral, Ashirwad,Finolex, Prince or Equivalent.

25 mm dia

Supply and fixing of 25 mm nominal bore gate valve

Supply and fixing of 20 mm nominal bore gate valve

Approximate Amount Put to Tender