2001(05 25)/NIFT-Delhi/Building/2026 P-1

Dismantling wooden boarding’s in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead: Thickness above 25 mm or more

Dismantling aluminum/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Dismantling of the Spilt / Window/ Ductable ac including cu pipe, drain, Duct, cable, indoor, outdoor etc and shift it to the basement or designated place as directed by the Engineer-in charge.

Removing of the entire Electrical wiring/ cabling of proposed area of LD and AD department

Dismantling steel work in single sections including dismembering and stacking within 50 meters lead in: Channels, angles, tees and flats

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm center to center, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and fixing 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fiber and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) asper IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K asper ASTM 518:1991,in true horizontal level on the existing frame work consisting of T-sections and L sections suitably fixed according to tile size as per direction of Engineer-in-charge.

Providing and fixing of 12 mm thick toughened glass partition with glass of M/s Saint- Gobain/ M/s Modi Guard/ M/s Asahi make, using U Channel OGL-PR-11 (Ozone make) with S.S. flip cover, to be fixed to floor and wall using suitable approved S.S. rawl plugs/ anchor bolts at a maximum distance of 600mm c/c, and sealing the joint with approved make of silicone sealant (Dow corning/equivalent make) . The Glass to be etched/ frosted film pasted/text to be written on it as per drawing provided or as directed by NIB, complete work

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing , polishing and making curvature ( wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Enginner- in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)