Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹1.5 L
Closing Date
3 Dec 2024, 10:30 pmClosed
Bengaluru Water Supply And Sewerage Board
AEESE3
08022945169
Tender for the work of providing and fixing Sluice valves, Air valves and Scour valves and its valve chambers for existing water supply network and other linking, improvement works at Panathur village to facilitate equitable distribution of water supply coming under AEESE-3 sub division
BWSSB/2024-25/WS/WORK_INDENT1751
BWSSB/2024-25/WS/WORK_INDENT1751
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
BWSSB Executive Engineer South East One
8 documents required · 8 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The tenderer should have satisfactorily completed one similar work to an extent of 50% of the cost of this work (amount put to tender) ie. Rs.45.47 lakhs (inclusive of GST)
Satisfactorily should have completed, as prime contractor, in any one year minimum quantities such as providing and laying of 100mm dia and 150mm dia DI water supply pipe line for length of 968.00 Rmt and 36.00 Rmt respectively along with specials in a continuous 12 months
The tenderer should have in the last 5 years period achieved in at least two financial years an average annual financial turnover of rupees not less than the estimated cost under this contract (amount put to tender) i.e, Rs.90.93 lakhs (inclusive of GST). Turnover, Profit & Loss account, Balance sheet statement certified/audited by a Chartered Accountant along with UDIN No. to be submitted, which is mandatory
Liquid assets and/or availability of credit facilities of not less than Rs.27.28 lakhs (inclusive of GST) (credit lines/letter of credit/ certificates from banks for meeting the fund requirement etc.)
Annual Turnover Certificate along with Profit & Loss account, Balance sheet statement certified/audited by a Chartered Accountant along with UDIN No. The UDIN No. is mandatory
Form of tender duly signed by the contractor on his firms letter head
On going work details as per the format in the bid document
₹1,930
₹1.5 L
24 Nov 2024
24 Nov 2024
4 Dec 2024
2 Dec 2024
Tender for the work of providing and fixing Sluice valves, Air valves and Scour valves and its valve chambers for existing water supply network and other linking, improvement works at Panathur village to facilitate equitable distribution of water supply coming under AEESE-3 sub division
Cutting of Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then Refilling the Cable Trenches
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm (Depth upto 1.50m not exceeding 1.5m in width ) trench width as per drawing and technical specificati...
Providing and laying Ductile Iron pipes of class conforming to IS 8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect l...
150mm dia DI K7 pipe
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
For sluice Valve of PN10.0 and 150mm dia
For sluice Valve of PN10.0 and 200mm dia
Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS-732...
Providing Ductile Iron Push on special confirming to IS 9523:2000 - All D.I. Flanged Socketed, D.I. Flanged Spigot, MS End Plates (a) D.I. Flanged Socketed 100.00 mm
D.I. Flanged Socketed 150.00 mm
D.I. Flanged Socketed 200.00 mm
Providing Ductile Iron Push on special confirming to IS 9523:2000 -
Socketed D.I. Equal Tees (a) 100mm X 100mm X 100mm
Providing Ductile Iron Push on special confirming to IS 9523:2000 - All D.I. Flanged MJ COLLAR (a) 100mm dia collar
150mm dia collar
200mm dia collar
Providing Ductile Iron Push on special confirming to IS 9523:2000 (Bend) (a) 100mm dia x 22.50 deg
100mm dia x 45 deg
100mm dia x 90 deg
150mm dia x 90 deg
150mm dia x 45 deg
150mm dia x 22.50 deg
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, cluding T&P and scaffolding wherever neces...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Bedding or Backfilling using approved stone dust / quarry dust of size not exceeding 5.6 mm for the pipe line trenches including watering and consolidation etc., complete with all lead and l...
Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanica...
Providing and laying Dense Graded Bituminous Macadam with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.0 per cent...
Tack coat on Granular surface treated with primer : Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface
Bituminous Concrete Grading I for traffic is
less than 20 MSA: Providing and laying Bituminous Concrete with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading...
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats with bituminous binder VG-30 - Type A Premix S...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Epro_bid_doc_162.doc
Tender Document • 1.52 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].