81700SPECIAL REPAIR TO BOUNDARY WALL BETWEEN AHIRE GATE TO COMMUNITY HALL AND BP 248 TO NYATI TOWER, GUARD HOUSE AND ANCILLARIES AT NDA KHADAKWASLA.

Amount

Demolition of brick work/ block masonry or stone masonry built in cement mortar including all quoins, arches, pillars etc complete all as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard dense soil including bailing out, pumping out or otherwise removing all water, mud, wastes and work in foul condition which may accumulate in the excavation, from all couses complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard dense soil including bailing out, pumping out or otherwise removing all water, mud, wastes and work in foul condition which may accumulate in the excavation, from all couses complete all as specified and as directed.

Excavating over areas in soft / loose soil, n exc 1.5 m depth and getting out including bailing out, pumping out or otherwise removing all water, mud, wastes and work in foul condition which may accumulate in the excavation, from all couses complete all as specified and as directed.

M&L for plain cement concrete in fioundation filling and mass concrete type D-2 1:4:8 (using 40 mm graded stone aggregate) complete all as specified and as directed.

M&L for RCC M-25 (Design mix) RMC as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, basement slabs, under reamed piles and mass concrete etc complete all as specified and as directed.

M&L for RCC M-25 (Desigm mix) RMC as in column, pillars, piers, posts and struts complete all as specified and as directed.

M&L for RCC M-25 (Desigm mix) RMC as roof beam, lintel beam and band, plinth band etc. complete all as specified and as directed.

S&F Form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams etc flat rough fiished faces of concrete.complete all as specified and as directed.

S&F Formwork to sides of pillars, posts, struts piers, columns and stanchions, with fair finished surface complete all as specified and as directed.

S&F Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

S&F Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

S&F TMT bars 5 mm dia and over upto and incl 10 mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with the clips.complete all as specified and as directed.

M&L for providing cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) design mix in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing complete all as specified and as directed. Note : Reinforcement shall be paid seperately.

M&L for block masonry with solid blocks of precast cement concrete class designation C-5 (using 20 mm graded stone aggregate), exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed.

M&L for walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

M&L for raised pointing to random or polygonal rubble, uncoursed on brought upto courses in cement mortar 1:4 complete all as specified and as directed.

M&L for raking out joints / pointing to squared rubble masonry, coursed or uncoursed built in cement mortar complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as directed.

M&L for rendering 15 mm thick on fair faces of brick / concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer including gate, grills etc complete all as specified and as directed.

M&L for preparation of new decorated surfaces of wall and applying two coats of cement based paint complete all as specified and as directed.

M&L for preparation of old decorated surfaces of wall and applying one coats of cement based paint complete all as specified and as directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as directed.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. complete all as specified and as directed.

M&L for Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as directed.

SUN Enterprises

M/s KAILASH CHANDRA

OM GANESH CONSTRUCTION

Sarkar Enterprises

AJINKYA VIKRAM GAIKWAD

G V HAGAWANE

Sayili Enterprises