Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.6 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹39.8 L+₹1.2 L (3.21%)Rejected-Finance FLAT NO A 15 ARCHANA GREEN SOCIETY NIBM ROAD KONDHWA PUNE 411048 | PUNE | MAHARASHTRA | 411048 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹39.9 L+₹1.3 L (3.34%)Rejected-Finance MOURYA HEIGHTS SATAVNAGAR HANDEWADI ROAD HADAPSAR PUNE 28 | PUNE | MAHARASHTRA | 411028 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹40.4 L+₹1.8 L (4.56%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹40.7 L+₹2.1 L (5.34%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹46.8 L
EMD Value
₹93,540
Closing Date
2 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH PUNE
Garrison Engineer North General Cariappa Marg Camp Pune 411001
GE (N) P/TOKEN- 35 OF 2022-2023 SPL REPAIR TO BLDG NO. T-42 OF SOUTHERN COMMAND SIGNAL REGIMENT AND MW WORKS IN THE AREA OF AGE B/R (EAST) UNDER GE (N) PUNE
2022_MES_536743_2
GE (N) P/TOKEN- 35 OF 2022-2023
Open Tender
Civil Works
Item Rate
240 days
GE NORTH PUNE
Refer tender documents.
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹93,540
Yes
26 Sept 2022
26 Jul 2022
4 Aug 2022
26 Jul 2022
2 Aug 2022
28 Jul 2022
26 Jul 2022 - 27 Jul 2022
Amount
Dismantling single layer Mangalore pattern tiles or similar tiles in roofing and taking out from the site without disturbing existing false ceiling complete all as specified and as directed.
Material and labour for roof tiles Mangalore pattern interlocking at side joints, laid dry class A-A complete all as specified and as directed.
Fixing only roof tiles Mangalore pattern interlocking at side joints, laid dry complete all as specified and as directed. (Note : Serviceable tiles obtained from dismantled item shall be re-used.)
Material and labour for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar (1:6) etc. including demolition of existing ridge or hip tiles bedded in cement mortar complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof coverings complete all as specified and as directed.
Supply and fix for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.
All as per serial item No. 06 here-in-before but except sheeting.
Supply and fix in repairs 0.56mm thick plain, Aluminium sheeting, alloy 31000H4 in ridges, hips, valley gutter, crumple joint, drip and straight flashing (length and girth as fixed) complete all as specified and as directed.
S&F of Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Dismantling battens for tiles of any size and description spaced exc. 15cm including tilting fillets complete all as directed.
Dismantling timber scantling in fillets, rails, posts, rafter, purlins etc, under 40 Sqcm in section, unframed work complete all as specified and as directed.
Supply and fix for mild steel work in tubular sections in battens including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and as directed.
S&F rolled mild steel sections Fe-410-W(Gde-E-250)quality-B, as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates complete all as specified and directed
Dismantling timber scantlings 40 Sqcm and over in section in unframed work in any position complete all as specified and as directed.
Material and labour for 2nd class hard wood, clean sawn, in scantlings timber fixed unframed work complete all as specified and as directed.
All as per serial item No. 15 here-in-before but except timber complete all as specified and as directed. (Note : Serviceable materials obtained from dismantled shall be re-used.)
Dismantling of eaves/ boarding any description and in any position fixed with nails complete all as specified and as directed.
M&L for Eaves/ weather boarding with 20mm thick fibre cement board (non asbestos) and fixed with self drilling and tapping screws of CSK head and joints finished with jointing compound and fiber tape as per manufacturer's recommendation complete of approved arch pattern any size and shape; including preparation of new or previously untreated surfaces over pink primer and two coat synthetic enamel paint complete all as specified and as directed. Make: V-Board (Visaka Industries Ltd)/ Everest/ Charminar/ Ramco
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
Material and labour for brickwork with fly ash bricks, old size straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed
M&L for 15 mm thick cement plaster in CM 1:4 on brick or concrete surfaces finishing the surfaces even and smooth without using extra cement with two coats of exterior emulsion weather proof paint over a coat of primer on new surface complete all as specified and as directed.
M&L for 15mm thick cement plaster dubbing coat in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement , with two coats of cement base paint over a coat of primer on new surface including taking down old plaster complete all as specified and as directed.
Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other means including filling depessions of scapped surface with putty and pereparation of surface for further treatment and M&L for two coats of distemper oil emusion white or tinted over a coat of primer over one coat of wall care putty 1 to 2mm thick on walls complete all as specified and as directed.
M&L for 15mm thick cement plaster dubbing coat in CM 1:6 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement , including taking down existing plaster with two coats of OBD of any tint over one a coat of primer on new surfacecomplete all as specified and as directed.
M&L for complete removal of existing finish /treatment on walls, preparing surface and make surface free from loose particles oil stains etc and surface and applying two coats of cement based paint on wall, complete all as specified and as directed.
Preparation of old painted surface and applying one coat of synthetic enamel paint steel surfaces of any description, over 10 cm width or girth, upto and including 15 Mtr ht otherwise described and complete all as specified and directed.
Preparation of old wooden surface and applying one coat of synthetic enamel paint complete all as specified and as directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/slabs/blankets,any thickness, including cover fillets complete all as specified and as directed
Supply and fix for tiled false ceiling of size (600x600)mm in true horizontal level suspended on inter locking Gyproc Matrix metal grid of hot dipped galvanized steel sections. It consists of main "T" runner of size 24x38x0.3x 3600mm, cross "T" of size 24x25x0.3x 1200mm, secondary cross "T" of size 24x25x0.3x 600mm and PPGI wall angle of size 24x24x0.4x 3000mm. Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI. PPGI wall angle 24x24x0.4x 3000mm {Material-GI(IS513),YS-280Mpa,Finish-Galvanised 90GSM(IS277)} is fixed along the perimeter of the ceiling to Walls, partitions or columns etc., with wooden screws at 300mm centers or Hilti HPS 6 x40mm placed at 600 mm c/c. Gyproc ® soffit cleat 27x37x25x1.6mm {GI(IS513)YS-260Mpa,Finish-Galvanised 120GSM(IS277) } is fixed with Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1200mm x 1200mm grid. Main-T runners 24x38x0.3x3600mm are then suspended at 1200mm c/c from ceiling using 4mm zinc electroplated butterfly level clips of size 85x30x0.8mm spaced at maximum 1200mm center to center along main T and not more than 150mm from spliced joints. (Contd...)The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall/ hung from ceiling using 2mm dia. G.I. suspension wires and 'J' bolts, washers, nuts spaced at 1200 mm both ways as per site requirement. 24x25x0.3x 1200mm cross T {GI(IS513)YS-280Mpa,Finish-Galvanised 120GSM (IS277) } is interlocked between the main T at 600mm center to center to form a grid of 1200x 600 mm and then secondary cross “T" 24x25x0.3x600mm {GI(IS513)YS-280Mpa,Finish-Galvanised 120GSM(IS277) } is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross Tees at the ends having length more than 600mm are to be supported independently. Finally 9.5mm thick square edge Gyproc Polyshield Gypsum tile of size 595x595mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges, so as to make the tile a completely sealed unit, is placed in the grid including making niches for fans/ light complete all as specified and as directed. Make: Gyproc-Saint Gobain of equivalent of Armstrong, Diaken, New Age (ACE) as approved by GE.
M&L Textured heavy duty exterior tiles of size 300mm x300mm x 10mm thick , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed in CM (1:4) including dismantling of existing tiles complete all as specified. make ;- Jonhson Endura textured design or equivalent of kajaria /Somany).
M&L coloured Vitrified Double Charge tiles 10mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 including dismantling of existing surface complete all as specified and as directed. Make : Kajaria/NITCO/Johnson.
M&Lcoloured Vitrified Double Charge tiles 10mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.36 sqm as in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 including dismantling of existing surface complete all as specified and as directed. Make : Kajaria/NITCO/Johnson.
M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 including dismantling of existing floor tiling complete all as specified and as directed. Make : Kajaria/NITCO/Johnson.
M&L Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB plateform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges including dismantling of existing floor complete all as specified and as directed.
M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface including dismantling of existing floor complete all as specified and as directed.
Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregates) as in sub base complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 20 to 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including screed bed 20mm thick in CM(1:6) including dismantling of existing floor complete all as specified and as directed.
Excavation in trenches n.exc 1.5m wide and n.exc 1.50m deep and getting out any type of soil complete all as specified and as directed.
M&L for PCC (1:4:8) type D2 (using 40mm graded aggregate) in foundation filling and mass concrete complete all as specified and as directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exc. 25cm in soils complete all as specified and as directed.
Removing excavated material not exc. 500 mtrs and depositing where directed at a level not exc. 1.50mtrs above the starting point complete all as specified and as directed.
S&F in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing complete all as specified and as directed. Make: JINDAL, TATA, RAVINDRA
All as per Srl item No 43 here-in-before, but fixing only complete all as specified and as directed.
S&F in repair 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing complete all as specified and as directed. Make: JINDAL, TATA, RAVINDRA
All as per Srl item No 45 here-in-before, but fixing only complete all as specified and as directed.
M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and as directed.
S&F in repair white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including waste coupling and PVC waste pipe, 32mm diacomplete all as specified and as directed. Make: Perryware Model Aquarius, Cat Part No – C0466(SP) or of equivalent make as per Appx 'A' as approved by GE.
S&F PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and as directed.Make : Prayag/Polytuff. CAT No.323Z
S & F in repair brass Chromium plated soap dish(Polycarbide) , fixed to wall with CP brass screws, complete all as specified and as directed. Make: Jaquar Cat No ACN-1131N or of equivalent make as per Appx 'A' as approved by GE
S & F in repair Brass Chromium plated towel rail complete all as specified and as directed. Make: Jaquar Cat No ACN-1111N or of equivalent make as per Appx 'A' as approved by GE
S&F in repair Brass Chromium plated towel ring all as specified and directed. Make: Jaquar Cat No ACN-1121BN or of equivalent make as per Appx 'A' as approved by GE
S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Make: Jaquar Cat No FUS-29037 Fusion series or of equivalent make as per Appx 'A' as approved by GE.
S&F in replacement angle stop valve with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29053 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.
S&F in replacement 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and as directed.
S&F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and as directed.
S&F in repairs PVC (SWR) bends of any radius of 75mm dia complete all as specified and as directed.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast complete all as specified and as directed.
All as per srl item No.59 above but exc. 1.5 sq.m but n exc 4 sqm each complete all as specified andas directed
Taking down shutters of any description exc. 1sqm but n. exc. 2sqm complete all as specified and as directed.
All as per ser items No.61 here-in-before but exc. 2 sqm each complete all as specified and as directed.
S&F fully glazed single/double leaf openable door, using aluminium powder coated sections on door floor spring, pivots, with 5 mm thick glass in panels fixed with aluminium glazing clips section No. 19381 and 19352 and PVC rubber beading all around including with 1” interlock and handle, two lever door lock, sliding wheel etc sections as given below and complete all as specified and as directed by Engineer-in-Charge.Top-19528, Middle – 19575, Bottom – 19530, Vertical – 19526, 1” Interlock (20939), 1” Handle (20602)
Supply and fix for aluminium powder coated three track sliding window with two glazed shutters, with 4mm thick tinted glass of modigaurd and one shutter of stainless steel wire mesh 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed
S/F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.
Factory made 100 % solid wood plastic composite(WPC) door frame, double rivet 125 mm x 45 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, complete all as specified and as directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.
Factory made 100 % solid wood plastic composite(WPC) door frame, single rivet 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.
Supply and fix for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 30X6mm all around the shutters complete all as specified and as directed all as specified,including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and as directed.
Factory made PVC prelam wire gauge shutter (Single piece both side), 33 to 35mm thick consisting of frame made up of MS tube of size 25mm X 25mm (19 gauge) for top & bottom rail, and in styles. Single piece plane coloured PVC sheets of 5mm thick to be used to cover style & rails. For edges, PVC sheets strip of 20mm thick struck inside with solvent cement. Plane colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert with PVC board 22mm to 25 mm solid core board . Panel shall be of wire gage stainless steel wire cloth 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.4mm to 2mm. stainless steel wire cloth shall be covered with aluminum XPM in rhombus shape in one piece from top to bottom rail , complete all as specified and as directed. Note : All screws shall be self tapping chroming plated and length of Screw not less than 50 mm.
Factory made PVC Flush door of 33 to 35 mm thick overall thickness comprising of 19 SWG MS tube of size 19 x 19 mm (19 gauge) covered with 5mm thick PVC Sheet, (any colour as approved) on both sides core shall be filled with 19mm to 20mm thick PVC solid board taking down with existing one complete all as specified and as directed. Note : All screws shall be self tapping chroming plated all as specified and directed by Engineer-in-Charge.
S&F in repairs Stainless steel butt hinges medium weight 100mm complete all as specified and as directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm
S&F in repair 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified.
18 mm thick UV board duly edge banded with 0.8 mm thick PVC taping fitting of shutters shall be fixed with and including continous piano steel hinges and modular handles, design and colour as approved by GE suitable for cup board etc complete all as specified and as directed.
S&F Shelves made of HDHMR board 18 mm thick water proof with life time warranty for anti-termite shall be duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves complete all as specified and as directed.
S & F 30mm thick continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed.
S&F in repairs Drapery curtain rod of metalic 25mm dia covered with PVC coating complete with MS bracket any colour rings and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw complete all as specified and as directed.
Preparation of old painted surface and applying one coat of synthetic enamel paint steel surfaces of any description, over 10 cm width or girth, upto and including 15 Mtr ht otherwise described and complete all as specified and as directed.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, manholes , inside drains etc and getting out in Soft/loose soil complete all as specified and as directed.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, manholes etc and getting out in hard/dense soil complete all as specified and as directed.
Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out in hard/dense soil, returning, filling in & ramming earth or broken rubbles mixed with earth around in layers n.exc 25 cm complete all as specified and as directed.
M&L for cement concrete type B1 (1:2:4) using 20mm graded aggregates as in post holes complete all as specified and as directed.
S/F rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. Including making holes into angles for fixing wire mesh confirming to FE - 410 W(Gde E-250) Quality B complete all as specified and as directed.
Supply only Chain link MS galvanised fencing, any size or type weighing n exc 4 kg/sqm conforming to IS:2712,galvanised coating of type heavy as laid down in IS 4826 ,make as approved by GE complete all as specified and as directed.
Fixing only Mild Steel Galvanised chain link fencing 2"x2" wire mesh ,including fixing to any type of standards, rail, straining bolts etc including provision of binding wire ,make as approved GE,complete all as specified and as directed.
S&F MS Flat for post and struts in fencing including cuttings tops to shape as directed, drilling holes, notching for wire etc and flat iron fillets for securing wire mesh including all necessary drilling, bolting or riveting etc conforming to Fe 290-O Gde E-165 complete all as specified and as directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length exceeding 5cm but not exceeding 10 cm & dia of neck 5 to 10 mm complete all as specified all as specified and as directed
M/L two coats of synthetic enamel paint over a coat primer on newly steel surface including preparation complete all as specified and as directed.
M&L for Moorum filling in floors or paving's, laid in layers n exc 15 cm thick, spread, leveled and rammed including watering complete all as specified and as directed
Dismantling fencing wire mesh any size and description complete all as specified and as directed.
M & L for Providing precast cement concrete louvres and jallies,38mm thick type B0 1:2:4(12.5mm graded aggregate) , set in CM 1:4 (measured solid), including all mouldings but excluding frame complete all as specified and as directed.
M&L formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20 cm wide. For rough finished surfaces of concrete complete all as specified and as directed.
M& L for RCC (Nominal Mix) type B1 1:2:4 (using 20 mm graded aggregate) as in beams , cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
All as per item No 98 here-in-before but 6mm to 8mm dia complete all as specified and as directed.
Taking down carefully unserviceable point wiring of any description/ type/ size of light/ fan / tube/ power / two way/ bell etc. on TW batten/ conduit/casing caping including removal of batten/ conduit/ casing caping/ gutties/ wooden boards/ switches/ sockets/ regulators/ holders/ ceiling roses/ call bells/ light fittings etc. for taking credit and making good the disturbed surfaces of wall/ ceiling so as to match with the existing finishes complete all as directed. Note: Taking down of seviceable fittings and fixtures shall be measured and paid separatey.
Taking down the existing unserviceable main switch/ cut out/ MCB DBs/ sheet metal enclosure of any type/ capacity/ description as existing at site including MCBs any type/ capacity and making good the disturbed surfaces of wall/ ceiling to match with the existing finishes complete all as directed.
Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories after chasing in brick / stone masonry walls etc, Metal flush box of suitable module, with earth dolly, covered with modular white cover plate & frame for modular switches, sockets, regulators including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for one light point controlled by one, one way switch 5/6 Amps complete all as specified and as directed.
All as per serial item No. 101 here-in-before but point wiring for one exhaust fan/ wall fan point controlled by one, one way switch 5/6 Amps and regulator complete all as specified and as directed.
All as per serial item No.101 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on same board complete all as specified and as directed.
All as per serial item No.101 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on independent board complete all as specified and as directed.
All as per serial item No.101 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLSH copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed
Supply and fix for lamp holder, PVC body/ polycarbonate type with back plate, brass terminals suitable for batten/ slanting fittings complete all as specified and as directed.
Supply and fix for modular switch, one way 5/6 Amps, 1 module complete all as specified and as directed.
Supply and fix for modular switch, one way, 15/16 Amprs, 1 module complete all as specified and as directed.
S & F Modular socket outlet multipurpose three pin 5/6Amps and three pin 15/16Amps combined 2 module, complete all as specified and as directed.
Supply and fix for modular step type electronic fan regulator flush type 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.
Supply and fix for sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.
Supply and fix for ceiling rose, 3 terminals, PVC/ polycarbonate type, isolated body complete all as specified and as directed.
Supply and fixing for wall mounted LED 20/22 Watt Inverter LED batten with Opal Diffuser, IP20 Battary back-up & functioning as per product TDS with integrated electronic driver, connector bolck, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular bolck, provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion complete all as specified and as directed. Make Halonix Cat No LED inverter batten HLB - 08-22-CW-INV or equivalent in Havells LHEXACP7NIW020
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size and taking down old unserviceable fitting from existing postion complete all as specified and as directed Make Jaquar Cat No - LULTU1S036XC or equivalent in Philips Cat No RC380B LED36S
Supply and fix for energy saving new generation environmental friendly long life versatile pressure die aluminium IP-66 for security light fitting luminaire of capacity 25 watt with high power LEDs as light source and electronic driver with lumens out put not less than 2500 lumens, with prewired all as per Cat No. BRLEP 25 W LED WH (Edge plus series) of make Bajaj, Philips CAT part No. BRP042 LED HP CW 25W or equivalent of make Wipro/ Havells/ Crompton/ as approved, necessary mounting arrangements and provision of 2.5 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting including 40mm dia 1.5 metres long GI pipe medium grade bracket of suitable shape with clamps made out of MS flat iron of size 40mm x 6mm, nuts, bolts complete all as specified and as directed.
Supply and fixing for 50mm bore GI tubing medium grade for supporting the ceiling fan including necessary fixing arrangement in between two walls with PCC 1:2:4 Type B1 as per site requirement complete all as specified and as directed.
Taking down carefully ceiling fan/ exhaust fan / wall fan of any sweep, keeping with safe custody and refixing the same after cleaning dust, oiling, greasing, replacement of bearings nd bushes,servicing etc. with replacement of unserviceable PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal, complete all as specified and directed.
Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less then 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected to main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm including 8mm dia TMT bars both ways with one handle for lifting made out of 8mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized steel tubing (medium grade) for watering, filling charcoal or coke and salt in alternate layers, 15mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No.3 of SSR Part-I including taking out existing earthing complete all as specified and as directed. (Note: GI earth wire and protection pipe upto 7.5metres shall be deemed to be included in quoted rate)
Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
M/S Eknath agencies
Gauri Associates
THE SAIRAM CONSTRUCTIONS
SHAH BUILDERS
Sai Construction
Parhar Enterprise
J P ASSOCIATES
ANIL CONSTRUCTION CO.
M/S - R K CONSTRUCTIONS
S V ENTERPRISES
M/S Sharvi Construction
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .