Providing and installation of R.O water purification plant of 1000 LPH at Kanwa village of MKD-I OCM of Umrer Sub Area.

Amount

Item Description/ Heading

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 fine sand : 6 graded stone aggregate 40 mm nominal size ).

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing PTMT Stop cock of approved quality and colour 15mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work A) 50 mm nominal outer dia .Pipes

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work B) 25 mm nominal outer dia .Pipes

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work C) 15 mm nominal outer dia .Pipes

Providing and fixing PTMT bib cock of approved quality and colour15mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and fixing of retro-reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 square meter made out of____ mm aluminum shee tbonded with white retro reflective sheeting of Class__(Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified background, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No8.3, supported with back support frame 25mmx25mmx3mm, duly painted on backside with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75mmx75mmx6mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45cmx45cmx60cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc. complete. The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. ClassB (Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer incharge by the contractor /supplier. 2 mm aluminum sheet class B.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :50 to 80 mm nominal bore

Installation and commissioning of R.O of capacity 1000 LPH Compusing of Raw water feed pump, multigrade sand bed filter activated carbon filter, anti sclent dosing system, micron cartidger filter, control instruments to ensure quality of pretreatment outlef/ RO feed, reverse osmesis block ( desatination clements / membranes, membrane housing , high pressure pump, nterennecitin pipeline) micron cartidge filter , control instrument for safe operation of RO plant & post treatment micron cartidges filter with 2 Ton capacity chiller & stainless steel Tank of 1000 litre capacity (Please refer technical specification annexure ' A ' for detail of R,O Plant)

Total impact of GST for the purpose of CTC

MORNINGSTAR INNOVATIONS

SINGH BROTHERS COMPANY

Bharat Enterprises

M/S ABHISHEK CONSTRUCTION