A R and M O in residential building at Rohru

Amount

Har brick masonry in comm burnt clay building brick in cement 1:4 (1cement :4 sand )2nd c lass brick in foundation and plinth within all leads and lifts as per directions of Engineer in charge

Stone soling properly hand packed fillng interstices with spalls and consoidating with power road roller to the requested gradient and casmber including srpeapding watering and rolling of binding materils moorum earth etc, as per HP.PWD specification 100 mm spread thickness fineshed work including material and laboour within all leads and liftsas per directions of Engineer in charge

cement flooring 1:2:4 (1cement :2 sand : 4 graded stone aggregate 20mm nominal size laid on a bed 12mm thick cement thick cement mortar 1:3 (1cement :3sand)laid in one layer and finished with floating coat neat cement within all leads and lifts as per dirctions of Engineer

Providing and layring spartic cermic tiles 5.5 mm thick flooring (300x300mm size)teads of steps laid on a bed 12mm thick cement mortar 1:3(1cement :3sand )finished with flush pointing in white cement within all leads and liftsd as per directions of Engineer in charge

15mm cement plaster single coat on fair side of brick/concrete /stone walls for interior plastering upto floor two level including arrisers internal rounded angles not exceeding 80mm in girth and finished even and smooth in cement 1:6(1cement :6 sand )including carrige of materials in all leads and lifts as per directions of Engineer in charge

15mm cement plaster single coat on rough side of brick/concrete /stone walls for interior plastering upto floor two level including arrisers internal rounded angles not exceeding 80mm in girth and finished even and smooth in cement 1:6(1cement :6 sand )including carrige of materials in all leads and lifts as per directions of Engineer in charge

6mm cement plaster to ceiling 1:4 (1cemen t :4sand)within all leads and lifts as per directions of Engineer charge

Applying Birla white wall care putty over plaster surface after throughy brushing the surface free from mortor drops dust loose materials and other forign matter sand papering smooth to give final matter finish to the surface within all leads and lifts as per direcitons of Engineer in charge

finishing wall with weather proof exterior grade emulsion of approved design(apexultima) or its equarlied on undecorated wall surface two coats ) to five an even shade and fin al finish after throiughly cleaning the surface to removal all dirt dustand other foreign matter etc includingh sand paper smooth complete within all leads and lifts as per directions of Engineer in charge

Earth work in excavation for all type of road structure such as retaining walls,breast walls,culverts,drains and parapets etcetera in all type of classification of soil comprising of ordinary soil,ordinary rock,hard rocks,chiseling/wedging out of rock (where blasting is prohibited) as per drawing and MORD technical specification Clause 305.1 and as per direction of the Engineer-in-Charge in

Stone Random masonry work in concrete 1:6(1cement :6sand)in foundation complete as per drawing tehcnical specifiction clause 702,704 1202 and 1203 including carrige materials in all leads and the as per directions of Engineer in charge

Providing corrugated G.I sheet roofing with glavnaised iron J or L hooks bolts and nuts 8mm diameter with biumetn G.I limpet washer filled with white lead complete excluding the cost of purlins rafters and trusses (i)0.63mm thick sheet including all leads and lifts as per directions of Engineer in charge

steel work welded in buil up section trusses and frame work in cluding cutting ifixing in postion and applying and priming coat of red lead pant in beams joints chaanles angles tress filets with connections plates or angle cleats as in main and cross berms hip and jack rafts purlins and connected to common rafters and the like as per specification

Providing and wood work in frame of door windows clreastory windows and other frasme wrought frame and fixed in position 2nd class deodar woor within all leads and lifts as per directions of Engineer

Providing and fixing paneled glazed paneled and glazed shutters for door windows and clreasotry windows including backenamelled iron but hinges with necessary screws 40mm thick 2nd class deodar wood including all leads and lifts as per HP.PWD specification 1990 volume _i as per direcgtion of Engineer in charge

Providing and fixing MS grills of require pattern in wooden frame of windows etc with MS flasts sqwuare or round bars with round headed bolts and nuts or by screws within alll leads and lifts as per directs of Engineer in charge

Applyng priming coat over new steel and other metal surface after including preparing the surface by throughly cleaning oil grase dirt and other foreign matter and scoured with wire brushes fine steel wood scrapers and paper complete

Painting two coats (excluding priming coat )new steel and other metal surface with ready mixed paint and residting brushing to give an even shade including cleaning of all dirt dust and other foreign matter details of cost for 10sqm within all leads and lifts as per directions of Engineer in charge

Applying priming coat on new wood and wood brased surrace other and including preparing the surface throughly cleaning oil grease dirt and other forgin matter sand papering and knotting within all leads and lifts as per directions of engineer in charge

Painting two coats excludding priming coat on new wood and wood based surface enamel paint go give and even shade including cleaning the surface of dirt dust and other foreign matter sand papering and stopping including carrriage within all leads and lifts as per directions of Engineer in charge

Providing 40x3 mm flat iron holded fast 40mm long including fixing to frame with 10mm diamter bolts nuts wooden plugs and embedding in cement concrfete block 30x10x3 sand :6 graded stone aagregate 20mm nominal 1:3:6(1cemewnt :3sand :6graded within all leads and lifts asper directionbs of Engineer charge

Providing and fixing anodized alumin ikum sliding door bolts anodized colour and shade with bolts an d nuts screws etc complete 300x16mm within all leads and lifts as per directins of Engineer in charge

Providing and fixing alum inium tower bolts (barrel type )anodized transparent or dyed to required shade and colour with screws etc complete 300x1-mm

Proiding and fixing aluminium hanles anodized transparent or dyred to required colour shade with necessary screws etc complete 125mm wthin all leads and lifts as per directions of Engineer in charge

Providing and fixing 0/60mm thick preliminated steel sheet in roofing with hot dipped matallic zinc coated sheet with top coat of regular modified polyster (RNP)organic coating of 20 micron over 5 cron primer coating including fixing with preparated iron liment and rubber washer with acceries as required as per the directions of Engineer in charge

DILA RAM