SPECIAL REPAIR OF WORKER CANTEEN IN D SUB DEPOT AT CAD PULGAON

Amount

Taking down cement plaster on brick or stone walls or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with, water etc complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:6) on brick work or concrete masonry wall surface complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises of MD land complete all as specified and as directed.

M&L for screed bed or bedding of layer 15 mm thick in CM (1:4) for laying of floor finishes complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:4 on brick/cement concrete surface of wall for laying of tiles in skirting/dados complete all as specified and as directed.

M&L ceramic glazed colour tiles size 300x200x7mm as in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation,etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

S & F Anodised aluminium snap grid of size 605 x 605 mm frame work for false ceiling all as specified with hangers 6 mm dia. GI (up to 1200 mm length) adjusting level fixed to roof by means of ceiling cleats made out GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

M & L Gypsum board 12 mm thick in ceiling fixed as per manufacture's instuction etc complete all as specified and as directed.

Taking down shutter of any description exc 1.00 Sqm but n exc 2.00 Sqm each complete all as specified and as directed.

Taking down shutter of any description n exc 1.00 Sqm complete all as specified and as directed.

S&F 2nd class hardwood plain fillets, square, rectangular or triangular in section, sectional area exc 13 & n exc 25 sqcm, clean sawn, secured with nails or brads complete all as specified and as directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters as in doors, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and as directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters as in windows, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b) complete all as specified and as directed.

S&F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides. etc complete incl 0.9 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed over 4mm thick ,3ply plywood, grade BWP, type BB fixed with screws to timber frame work with approved adhesive as per maker's instructions complete all as specified and as directed.

S&F 100mm size mild steel medium weight cold rolled butt hinges complete all as specified and as directed.

S&F 75mm size mild steel medium weight cold rolled butt hinges complete all as specified and as directed.

S&F 150mm long aluminum handles, cast type, anodised complete all as specified and as directed.

S&F 100mm long aluminum handles, cast type, anodised complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 125mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple ( bolt type) and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F 300mm, mild steel , ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares in n.exc 0.5 sqm in each pane complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm but not exc 20cm girth complete all as specified and as directed.

Hacking out old broken glasses (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips & providing & fixing new ones etc complete all as specified and as directed.

M &L for cement concrete (1:2:4) type B0 (using 12.5 mm graded stone aggregate) as in coping, cills, steps, kneelers, hold fast block etc, including weathering, slightly rounded or chamfered angles and throating, as directed including formwork complete all as specified and as directed.

S&F steel window/ventilators with top hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded includig taking down old unseviceable one complete all as specified and as directed.

S&F steel windows/ventilators with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded includig taking down old unseviceable one complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of apreature 1.40mm and fixed in aluminium windows, wooden doors etc complete all as specified and as directed.

Complete removal of existing treatment and applying 3mm thick wall care putty on old wall surface and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed.

Demolition of re-inforced cement concrete of any position and in any description not otherwise specifically provided for complete all as specified and as directed.

M and L for reinforced cement concrete type B1 1:2:4 (20 mm graded stone aggregates) for lintel beem, roof beem and slab complete all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape including cranking , bending, hooking end and binding with and including mild steel wire not less than 0.9 mm dia and securing with clips complete all as specified and as directed.

M&L for mild steel TMT bars 8mm dia, cut to length , bent to shape required, inculding cranking, bending spirally for hooping for columns, hooking ends and binding with steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Use and waste of form work to soffit of suspended slabs such as roof slabs not exceeding 200mm thick (horizontal or sloping) rough finished flat surfaces complete all as specified and as directed.

Use and waste of form work in to opening in roofs n exc 20 cm wide

Preparation of new surfaces of ceiling/board incl cornices etc and applying three coat of white wash complete all as specified and as directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated of approved profile steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screwscomplete all as specified and as directed.

Dismantling of AC sheets/transculent sheet (corrugated/semi corrugated) as in roof covering including ridges complete all as specified and as directed.

M and L marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms partition between toile bows and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L for 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed rebated on the solid rounded or chamgered put together with glue pinned at joints complete all as specified and as directed.

Dismantaling of timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and as directed.

Dismantling of wrought iron or mild steel work including grills and gratings,valley gutter, ridges & MS wind ties of any description not other wise provided for all as per site requirement complete all as specified and as directed.

S & F Rolled section Fe-290 (Gde E-165 Quality-A) as in main and cross beams, hip and jack rafter; purlins where connected to common rafter and running rails and guides for sliding doors fixed with angle cleats or other connection plates complete including necessery weilding etc complete all as specified and as directed.

S & F Mild steel screw bolt (Machine made ) with hexagonal or square heads at one end and screwed the other, or serewed both ends, each screwed end to be fitted with washers and one hexagonal or squqre nut, but length of bolt exc 10 cm and n exc 15 cm long and dia of neck 11 to 15 mm complete all as specified and as directed.

Dismantling of brick or stone masonry built in cement mortar including all quoins arches,pillars and precast concrete articles complete all as specified and as directed.

M & L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and as directed.

Preparation of old wooden surfaces of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

Prepration of new plastered surfaces of wall and applying two coats of oil bound distemper over and including 3 mm thick wall care putty

Material and labour for painting with one coat of synthetic enamel paint on old steel painted surfaces exc 10 cm width or girth including preparation of old steel painted surfaces complete all as specified and as directed.

M&L for 15 mm thick screed bedding layer in CM (1:3),for laying floor finishes as on roof surface smooth finish with using extra cement and water proofing compound @ 3% by wt of cement Note:water proofing compound will be measured and paid separately.

Supply integral water proopfing compound (approved make)

M&L for provision of water proofing treatment as following. (a) First course : One coat of bituminus primer @ .40 kg / sqm. (b) Second Course : One coat of bonding material using blown type bitumen grade 85/25 @ 1.20 kg/sqm. (c) Third course : A layer of APP modified polymeric membrane. Centre core of 100 micron HMHDPE, thickness 2 mm, having weight 3.00 kg/sqm. (d) Fourth Course : One coat of bonding material using blown type bitumen grade 85/25 @ 1.20 kg/sqm. slate finish torch on system laid with 100mm and 150mm overlap on sides and end laps respectively finally finished with a coat of aluminum paint @0.100 Kg/sqm complete all as per manuifactures instructions complete all as specified and as directed.

Material & Labour for painting with two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces exc 10cm width or girth including preparation of new steel surfacesall complete all as specified and as directed.

Material & Labour for painting with two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exc 10cm width or girth including preparation of new wooden surfaces complete all as specified and as directed.

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote

Demolition of cement concrete (un-reinforced) in ground floors and paving n exc 15cm thickness (below or above GL) incl removal o rubbish /debris outside MD land

M&L for (1:3:6) type C2, 100 mm thick, using 40mm graded stone aggreate as in foundations, filling & sub base complete all as specified and as directed.

M&L for PCC (1:2:4) type B2, 50mm thick using 20mm graded stone aggragate as in flooring finishing cement concrete surface even and smooth using extra cement complete all as specified and as directed.

Taking down carefully conceled/ casing caping point wiring copper / aluminium (light / fan / scoket) complete (with fittings such as switches ceiling rose, pendents, regulators sockets etc) and making good disturbed surface with exisitng specification complete all as specified and as directed.

M&L point wiring complete with 1.5sqmm single core sheathed PVC insulated FRLSH cable 1100 V grade multistranded copper conductor of different code of ISI marked drawn through and incl PVC casing caping of suitable size with accessories ISI marked incl PVC insulated copper cable for earth of same type and sized connected to earth dolly including provision of PVC box of suitable size for mounting switches / sockets and fan regulators etc complete all as specified and directed for the following:- (a) One light point controlled by one switch one way

(b) One ceiling fan / exhaust fan / wall mounting fan point controlled by one switch one way

(c) One socket outlet three pin 5/6 Amps controlled by one switch on the same board.

(d) One switch socket outlet three pin 5 /6 Amps controlled by one switch on independent board.

M&L for point wiring with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLSH , PVC insulated and sheathed cabel 1100 volts grade, ISI marked drawn in and incl PVC casing caping of suitable size with accessories ISI marked incl PVC insulated copper cable for earth of same type and sized connected to earth dolly including provision of PVC box of suitable size for mounting complete all as specified and directed.

M&L switch piano flush type single pole,one way, 5 Amps, 240 V complete all as specified and directed including taking down old U/S one complete all as specified and as directed.

S&F socket outlet 5/6 pin type,5 Amps, 240 V complete all as specified and directed including taking down old U/S one complete all as specified and as directed.

Supply & fix switch socket combination flush type 2 and 3 pin, 5 Amps, 250 volts, AC, multipurpose complete all as specified and as directed.

S&F switch socket combination flush type (multipurpose type) but 15A/16A, 5 in 1 15 Amps, 240V complete all as specified and directed including taking down old U/S one complete all as specified and as directed.

S&F ceiling rose surface type with 3 terminals complete including taking down old U/S one complete all as specified and as directed.

S&F fan regulator electronic step type AC 240 Volts,50 Hz complete including taking down old U/S one complete all as specified and as directed.

S&F LED tube light lamp 1 x 18/20 watt retrofit including suitable size of batten complete (01 set) (single / double side connection) all as specified and directed including taking down U/S old any type of TL fitting. complete all as specified and as directed.

S&F in replacement of sheet steel enclosure with double door flush mounting ,MCB, DB, SPN 4 ways,240 volt factory fitted rated bus bars,earth bar,neutral links complete incl. blanking plates as required & making good the disturbed surfaces complete all as specified and as directed.

S&F in replacement of MCB SPN 20 Amps 240V ,50 Hz ,breaking capacity 10 KA," C " series complete all as specified and as directed.

S&F in replacement of MCB SP 06-32 Amps 240V ,50 Hz, breaking capacity 10 KA," C " series complete all as specified and as directed.

Material and Labour for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below ground level connected to galvanized iron earth lead wire 4.00mm dia by means of bolts, nuts, check nuts, washers of galvanized iron and connected to main switch/control board upto 7.5m away from the earth electrode including excavation earth work, PCC chamber, RCC cover slab char coal, watering pipe, wire mesh lugs, earth lead protection pipe 40mm bore, medium grade 7.5m long as applicable and as per plate No. 3 of SSR Part-I 2009 and all as specified. (a) Excavation and earth work in any type of soil. (b) Drilling of holes in electrode (c) PCC pit in cement concrete (1:2:4) type B-1 (d) 40 mm thick Pre-cast RCC cover or reinforcement with 8mm TMT bars at 100mm c/c bothways with suitable handle. (e) Funnel with watering pipe of GI 20 mm nominal bore ,medium grade & copper lug etc. (f) 15mm nominal bore medium grade GI protection pipe upto 7.50 m long for protection of earthing lead. (g) Requisite quantity of charcoal and common salt. (h) Connection to earthing test point and testing on completion.

Taking down of ceiling fan from bldg of any size / sweep / make and re fixing the ceiling fan below the ceiling with suitable size of down rod and hanging clamp on both side by cleaning , greasing to bearing and bushes and painting the fan , blade, down rod with one coat of white synthetic enamelled paint including writing of MES No. with black paint hanging complete all as specified and as directed.

Supply and fix in replacement exhaust fan AC single phase 230/240 V of size 300mm sweep with louver.

M/s Dara Constructions, Pulgaon

Ankit Construction

M/s VILAS RATAN MENDHE

Bidder Name

Ankit Construction

M/s VILAS RATAN MENDHE

M/S Ramakant Chourasia

M/s Dara Constructions, Pulgaon