SPECIAL REPAIR TO 04 X QTRS OF BLOCK 118 (OR MD ACCN) NEAR CRS KASAULI AT HQ 95 INF BDE AT KASAULI MIL STN UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified

S&F pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified.

pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.

Dismantling timber scantlings in unframed works 40sq. cm and over in section, in any position.

M&L for rolled mild steel section Fe 410-W (Gde E- 250) quality A as in purlin ,crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats gusset plate etc.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified.

M&L for Brick work with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6

M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 as in road side parapet / Drain all as specified and as directed.

All as per item No 08.00 but except stone complete all as specified and directed.

M & L dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed .

S & F coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:3, complete all as specified.

M & L Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:4 for laying glazed tiles in floors etc. , complete all as specified complete all as specified and as directed .

M&L Vitrified ceramic coloured tiles (of approved light shade) of size 600x 600 mm x10 mm thick in floor, set & jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over 20 mm thick cement screed bed or bedding layer of mortar for lying floor finishes in cement sand mortar (1:4) all as specified and directed.

Supply and fixed 18-20 mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs etc all as specified and directed.

Demolition of Cement concrete of any description and in any position not otherwise specifically provided for in landing and shelves etc complete all as specified.

M&L PCC 75mm thick 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring all as specified and directed.

Demolition of Reinforcement Cement concrete of any description and in any position not otherwise specifically provided for in landing and shelves etc complete all as specified.

Material and Labour for providing Reinforced cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, Beams, cantilevers, steps of stair case, all as specified. Note : (Reinforce bar paid and measured separately)

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, steps of stair case, shelves including supports, overhangs, etc. also splays between floors and beams, etc, for rough finished surface of concrete.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and as directed .

Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M & L for Rendering 5mm thick in cement plaster 1:3 on RCC ceiling incl finishing surface fair and even w/o using extra cement complete all as specified and as directed .

M & L for Rendering 15mm thick in cement plaster 1:4 on Brick work incl finishing surface fair and even w/o using extra cement complete all as specified and as directed .

M&L for two coat cement plaster,on brick/concrete surace of wall first coat 10mm thick CM 1:6 and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and smooth without using extra cement. (WPC will be paid seperately under respective item 24.00)

Supply only water proofing compound .

M&L for preparation of plastered or unplastered new surfaces of walls of and applying two coat of cement base paint over a coat of cement priming coat of any approved tint complete all as specified & as directed.

M&L preparation of new surface applying two coats of oil bound distemper on wall over a coat of 2mm th wall care putty over coat of chalk whiting primer.

M &L for complete removal of existing treatment with sand paper or iron patti and applying white cement based wall care putty on wall of Average thickness 2.00 mm using blade / spatula to prepare surfaces even and smooth and applying two coat of oil bond distemper of any approved tint complete all as specified. complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surfaces of walls including complete removal of existing treatment by washing, rubbing down and stopping of previously treated surfaces and applying two coats of cement base paint of approved tint and make complete all as specified.

M&L for preparation of new plastered surface and applying two coats of white wash on ceiling.

Taking down chowkats or frames without taking down shutters from the frame exc. 1.5 sq. m but n.exc.4 sqm each complete all as specified.

Taking down chowkats or frames without taking down shutters from the frame n exc. 1.5 sq. m each complete all as specified.

Taking down and refixing in same location after making nessary repair and make the shutter fit for use, shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed .

Supplied and Fixed IInd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

Supply and Fixing 35mm thick, 2nd class HW, Plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed .

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, suppling & fixing in opening as per specification.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded premale PVC sheet on the front face & 4mm thick prelam PVC sheet on back face, centre core will be PVC battern supplying & fixing in frame at site complete all as specified and directed by Engineer-in-Charge.

S & F anodised aluminium powder coated (thickness of powder coating not less than 50 micron) One/ three track sliding window/Cupboard frame of size 45.2 x 35 x 1.3mm and window/Cupboard shutter of size 37.5 x 15 x 1.6mm with one or more rebates including joining cleat for fixing and self locking devices of approved quality in each shutter, handles etc complete all as specified and directed. (Note: quoted rate deemed to be included for self locking devices)

S&F anodised aluminium powder coated (Powder coating shall be 50 micron minimum thickness) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No) suitable handle (1 No) compete all as specified (Note : Glass pane, panel insert, door closer, mortice lock shall be measured and paid separately )

S&F Mild steel work for framed work such as grills, (12mm sqm bars for window / ventilators for guard bars) grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Material and Labour for preparing new or previously treated or untreated steel surface of any description, over 10cm in width or girth,not otherwise described & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified

M&L for 9mm thick Prelaminated particle board, interior grade,prelaminated both side with decorative choice lamination ,fixed with aluminium frame work

S&F in repair 3mm Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane

Supply and fixing for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

Supply and fixing for stainless steel butt hinge ISI Marked 75mm size complete all as specified and as directed.

Supply and Fixing 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified in IS No 204-1991 and as directed .

Supply and Fixing 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified in IS No 281-1991 and as directed .

S&F 100mm Aluminium handles, cast type, anodised, fixed complete all as specified.

Supply and Fixing 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified in IS No 452-1973 and as directed .

S & F 3 mm thick frosted on one side sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exc. 0.5 Sqm in each pane complete all as specified.

Demolition of wall ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs blankets any thickness including cover fillets, complete all as specified and directed.

S&F GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 295mm X 295 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gsm/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. The exposed metal grid comprises of Main Runners and Cross Tees, roll formed from galvanized steel of 120/180gsm zinc coating. The main and cross tees are provided with bayonet coupling for quick installation and have a height of 32 mm and 24 mm. The grid is suspended from the roof with G.I. wire rods for quick adjustment by suspension hangers at max. 1200 mm and is filled with 1200 mm / 600 mm cross tees(24X26). Hangers are fixed to roof by expansion fasteners. Wall angle are 24 mm X 24 mm X 0.4 mm thick coil coated steel matching the colour of the tile.

Supply and Fixing galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed .

Material and Labour for preparing new wood surfaces of any description, not otherwise descri-bed, over 10cm in width or girth, & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified

S & F in repair of 25 mm dia curtain rods, mild steel wall thickness .80mm, powder coated with fixing metal ornamental holder and side finals(in pair for each door and window)as approved, fixing with PVC wall plugs bracket and brass screws complete all as specified.

M & L 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified

M & L 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with and incl necessary clamping complete all as specified

S & F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed .

S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified

S & F 75mm bore PVC (SWR) bends any radius complete all as specified and as directed .

S & F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

S&F in repair 15mm bore CP fancy type brass bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed (weight not less than 400gms).

S&F in repair 15mm bore angle cock CP fancy type with butter fly handle, screwed down, high pressure for iron pipes or for unions fixed in repairs (weight not less than 400gms).

S & F in repair of 15mm size PVC connections with PTMT nuts of length 450mm complete all as specified and as directed .

S & F in repair aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed .

Disconnecting existing tanks of capacity exc. 250 & n. exc. 500 litre, and removing to store complete all as specified and directed.

M&L for rotational moulded polyethylene water storage tanks 500 Ltr capacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified & directed.

S & F 20 mm bore ball brass valves high pressure with polythene float and flynut complete screwed or iron etc complete all as specified.

Taking up or down steel water tubing and connections of 15 mm bore fixed in any position complete all as specified.

Taking up or down steel water tubing and connections of 20 mm bore fixed in any position complete all as specified.

M & L for 15mm bore GI tubing Medium grade with all fitting and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified and directed .

M & L for 20mm bore GI tubing Medium grade with all fitting and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified and directed .

M & L in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified

S & F in repair sheet glass self asembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket and guard rail

S & F 600mmx450mm bevelled edge mirror of selcted qulaity glass, mounted on 6mm thick AC building board or commerical ply wood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified.

S&F in repair of Mixer 15 mm dia Brass CP mixer for WHB/sink mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.

S&F in repair of Mixer 15 mm dia Brass CP Wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.

S & F in repair of 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified.

S&F of Vitreous china squatting pan, "Orissa pattern" of size 680 x 470 mm white with integral foot rests(excluding flushing cistern, flush pipe and waste pipe), cast iron P or S trap including provision of cement concrete (1:5:10) type E2 with stone aggregate for setting the trap & pan,complete all as specified

S & F as in repair 10 litre PVC valveless, syphonic action type, dual flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed .

S&F 110 mm bore PVC (SWR) vent cowl, Complete all as specified and directed.

S&F of grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gm). Complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar sitution.

S & F 30 mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised

Cutting chases, pinning in, in brick wall for concealed water tubing and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

M&L for Raised pointing to random or polygonal rubble, un coursed or brought upto courses complete all as specified and directed.

Taking down carefully to existing copper/Aluminum point wiring (light,fan, socket or power) complete including fittings such as switches, ceiling roses, pendents, regulators sockets, light fitting etc removiing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

M & L for point wiring with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC conduit concealed in wall of conduit size 20mm with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing sunken boxes for mounting of switch, socket etc complete all as specified and directed for the following :-

One light / Fan/Bell point controlled by one way switch 5 Amp.

One 3 pin 5 Amp socket out let controlled by one switch on same board.

One 3 pin 5 Amp socket out let controlled by one switch on independent board.

Ditto all as per item No 88.00 above but with 2.5 sqmm cross sectional area electric cable for 15 Amp socket outlet on independent board, alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm as earth lead complete all as specified and directed

S & F switch piano flush type (ISI marked), single pole, one way 6/5 Amp, 240 Volts complete all as specified & directed.

S & F switch piano flush type (ISI marked), single pole, one way 16/15 Amps, 240 Volts complete all as specified & directed.

S & F socket outlet 4/5 pin, 6/5 Amp piano flush type complete all as specified & directed.

S & F socket outlet, 2 in 1, 6 pin 6 / 16 (5/15) Amp, piano flush type complete all as specified & directed.

S & F bell push 5/6 Amps SP flush type complete all as specified & directed.

S & F call bell ding dong type AC 230 V complete all as specified & directed.

S & F ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.

S&F MCB DB SPN 8 way double door, IP 42, CRCA sheet powder coated factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables & blaking plate as required incl taking out existing unsv DB of any size and making good disturbed surface to match with existing incl taking down unsv complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

Supply and fixing MCB, SP, AC, 240 volts "B" curve capacity of 06 to 32 Amps, breaking capacity 10kA and making connections complete all as specified & directed.

S&F MCB SPN 32 Amp to 40 Amp, 10 KA, 240 volts, IS/IEC 60898-1, 'B' curve complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs will be done with suitable thimble).

Supply & fixing MCCB TP,415V, Fixed type 63A with breaking capacity 16 kA and conforms to IEC 60947-2, and making connections complete all as specified & directed.

M&L for Sheet metal enclosure MCB DB double door, vertical type Triple pole & neutral 4 way with 200 Amp bus bar,neutral link, dinrail suitable for mounting MCB's 12 Nos Out going and 1 No. incoming MCCB of 63A capacity complete specified as directed. NOTE:- MCCB & MCB' s are measured and paid in seperate items.

Supply & fixing in repair LED tube light batten fitting 18/20W, (single Side Connection) including LED Rod including all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply & fixing in repair LED mirror light 10W including rod complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing energy saving LED surrounding Bldg light 45 W 6000K 240 W,One GI medium grade 40 mm dia bracket of total length 1 m and fixed to wall with 2 Nos MS Clamp and fastener incl dismentling taking down unsv fitting any type all as specified and directed.

Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50 m below notmal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 20 mm bore with funnel wire mesh and medium grade GI wire protection pipe 15 mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete ass as specified and testing on completion complete ass as specified and directed .Note - The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 20 mm GI pipe (light grade) for watering 15mm GI protection pipe (medium grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.

M&L for sub main wiring with two single core PVC unsheathed FRLSH copper cable 2X6 Sq mm+ 1x6 Sqmm, 650/1100 volts stranded conductor wire & drawing through rigid non metallic Concealed Conduit medium grade of size 25 mm ncluding continuous earth wire PVC insulated unsheathed cable 6 Sq mm copper multi stranded conductor and connecting to common earth and earth dolly complete all as specified and directed by Engineer-in-Charge. Note 3 ( three) run measured as 1 (one) run

S&F lamp Holder Angular type insulated body with back plate for batten fitting incl dismentling taking down unsv one all as specified and as directed.

S&F LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismentling taking out unsv CFL.

S&F LED bulkhead fitting 10 W LED complete all as specified and direcetd.

S&F Meter Box made up of BWR poilywood board of 8mm thickness covered with each 3mm laminated sheet, size of box shall be of 900mm x 450mm x 250mm including provision of shutters with lock and clasp complete and fixed as directed by Engineer-in-Charge.

S&F Exhaust Fan 300mm Sweep Steel body, 1500 RPM including cutting hole of suitable size in wall and making good the disturbed surfaces to match the existing, complete all as specified and directed.

S&F Exhaust Fan 250mm Sweep Plastic body, 1500 RPM including cutting hole of suitable size in wall and making good the disturbed surfaces to match the existing, complete all as specified and directed.

S&F LT 1.1KV AB (Aerial Bunched) Cable PVC, XLPE and multistranded of aluminium conductor material with 3 and half core ( i.e 25 Sqmm ) cables adhere to IS14055 standard including all the accessories for hanging, End extension/support clamp etc, complete all as specified and directed .

Amount of credit of Rs. 56852.40 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

Varindera And Varindera Construction

Pankaj Traders

Vishal Builder

R B TRADERS