Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹43.9 L+₹4.3 L (10.9%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹44.6 L+₹5.1 L (12.8%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹44.8 L+₹5.2 L (13.3%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹45.0 L+₹5.4 L (13.6%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹38.8 L
EMD Value
₹77,600
Closing Date
6 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 869 EWS
GE 869 EWS PIN 913869 C/O 99 APO
SPL REPAIR TO BLDG NO P-176 AT LEIMAKHONG MIL STN
2023_MES_622192_1
8547/E8
Open Tender
Civil Works
Item Rate
210 days
LEIMAKHONG MIL STN
AS PER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
GE 869 EWS
₹77,600
Yes
13 Mar 2024
7 Oct 2023
7 Nov 2023
7 Oct 2023
6 Nov 2023
23 Oct 2023
Amount
Schedule 'A'
Taking down of cement plaster inculding wall finishes in any description on brick or stone wall etc., incl hacking out joints for key scrubbing down with water etc. all as specified and directed. Note: Rates deemed to be inclusive of scaffolding upto 12 mtr height
M&L for rendering 15 mm thick on other than fair faces of brick work in cement mortar (1:4) using water proofing compound @ 2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified and directed.(Using Dimapur Sand) [Note: WPC will be measured and paid separately)
Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work.complete all as specified and directed.
M&L for Mild steel bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
M&L for Reinforced cement concrete ( nominal mix) type B0 (1 :2:4) (using 12.5 mm graded stone agg.) as in Slabs supported on walls,beams and columns in floors, roofs/chajja, landings, balconies, canopies, deck slabs and in shelves and the like roof complete all as specified and directed.
M&L for PCC 1:2:4 Type B0 (Nominal Mix) using 12.5 mm graded crushed stone aggregate as in coping to chajja tops and all other similar work etc. incl necessary formwork complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n exc 200mm thick (horizontal or sloping) rough finished surface of concrete complete all as specified and directed.
M&L for cutting holes into concrete slabs, chajjas,exc 100 Sqcm but not exc 250 Sqcm etc.reinforced or otherwise complete all as specified and directed.
M & L for rendering 10mm thick in CM 1:6 on fair faces of brick work, finished even and smooth without using extra cement complete all as specified and directed.(using Dimapur Sand)
Supply only Integral waterproofing compound complete all as specified and directed.
M&L for rendering 5mm thick on fair face of brick work or concrete surface wall or ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and as directed. (using Dimapur Sand)
Demolition Cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness below or above ground level complete all as specified and as directed
M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection including finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.(Using dimapur sand)
M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed.
M&L for Non -skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade and includig 15 mm thick screed bed in CM 1:4 complete all as specified and directed
M&L for light shade vitrified tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for light Shade Vitrified tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in dado, skirting, wall tiling etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and including rendering 10 mm thick on fair faces of brick work in CM (1:4) for receiving dado, skirting, wall tiling etc. complete all as specified and directed.
M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in dado, skirting, wall tiling etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including rendering 10 mm thick on fair faces of brick work in CM (1:4) for receiving vertical dado, skirting, wall tiling etc. complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store & rubish of the permises complete all as specified and directed.
M & L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed
S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in CM (1:4) as backing coat to receive tiles complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed 20mm thick in CM 1:3 complete all as specified and directed.
M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , nosing & grooming on steps, including screed bed 20mm thick in CM 1:3 complete all as specified and directed.complete all as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. Note :-Dismantling of false ceiling to be carried out carefully without damaging existing fitting and fixtures of flase ceiling items
S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 2mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed..
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as specified.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as ridge, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc. 4 sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed.
Taking down shutter of any description exc 1sqm but not exc 2 Sqm each and removing unserviceable materials from site of work complete all as specified and directed.
Taking down shutters of any description exc 1 sqm and not exc 2 sqm each including easing and adjusting and also refixing builder hardware as required including renewal of unserviceable screw and necessarry materials refixing shutter in same opening complete all as specifeid and directed.
S&F for Anodised aluminium frame for doors,windows, ventilators and partation with one or more rebates including joining cleat for fixing etc , Add extra for Powder Coating (minimum thickness of powder coating 50 micron) complete all as specified and directed.
S&F 5.5 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.
S&F Anodised aluminium of any colour door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading, screws etc. including all fittings complete all as specified and directed.
Supply and fixed aluminium (extruded section body) door closer hydraulically regulated designation No-3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F in repair brass mortice lock, vertical type, size 100 mm, 4 levers complete all as specifed and directed.
S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified.
S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S&F 30 mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F factory made UPVC white colour Sliding window Three track area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each Shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 (+/ -0.2mm) thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (i) The unit rate quoted by contractor including 4.8 mm thick glass and inclusive of all other connected accessories. (ii) Net opening will be measured for payment purpose. (iii) area exe 1.00 sqm but n. exe 2.00 sqm each pane
Providing and fixing factory made UPVC white colour Sliding window Three track Area exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each Shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. Note: (i) The unit rate quoted by contractor inclusive of 4.8mm thick glass and includes all other connected accessories (ii) Net opening will be measured for payment purpose.
S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue with hard drawn steel spring with 140mm overall length of cover plate complete all as specified and directed.
S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F 150mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.
S&F 200 mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.
S&F extruded aluminum alloy handles, cast type, anodised of size 150 mm complete all as specified and directed.
S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and dirceted.
S&F 300 mm long mild steel ordinary rat tail rod pattern helical door springs including roller and roller plate complete all as specified and directed.
S&F mild steel flat iron as in holdfast including screwing or welding complete all as specified and directed.
M&L for provding cement concrete 1:3:6 type C1 ( using 20mm graded stone agg ) as in hold fast complete all as specified & directed.
S&F in repair vitreous china European type wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat cover closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 ltr capacity in colour and PVC flush pipe 32mm dia complete all as specified and directed
S&F in repairs vitreous china wash basin white, oval shape of 550mmx400mm (minimum) including 32mm dia PVC waste pipe , CP brass waste coupling 32 mm dia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements including 450mm long PVC connection with PVC nut and washer complete all as specified and directed.
S&F in repairs Pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, but fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed
S&F PVC (SWR) floor trap with grating with incl jointing to waste pipe fixed in cement concerete (1:2:4) diameter of outlet pipe 75mm complete all as specified and as directed.
S&F in repair PVC connection 15 mm x 600 mm length including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed
S&F in repair fancy type chromium plated 15mm dia bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipes complete all as specified and directed.
S&F in repairs chromium plated shower roses 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union any colour for fixing with 15mm pipe complete all as specified and directed.
S&F in repair stop valve cast copper chromium plated fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipe complete all as specified and directed.
S&F in repair brass chromium plated towel rail 20 mm dia, 'D' type 600mm long between flanges with brackets fixed to walls with brass screws etc. complete all as specified and directed.
S & F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.
Taking up or down 15mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.
S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Refixing of old 15mm GI tubing and connections on new or old position (walls, ceilling, floor etc) complete all as specified and as directed.
Cutting chases, pinning in. making good to facings of brick walls where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
Taking up or down 20mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.
S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Refixing of old 20mm GI tubing and connections on new or old position (walls, ceilling, floor etc) complete all as specified and as directed.
S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified and as directed.
S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floor complete all as specified and as directed.
S&F 75mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floor complete all as specified and as directed.
S&F 110mm dia PVC SWR branch bends of any radius with acess door complete all as specified and as directed.
S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia with access door complete all as specified and directed.
S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia with access door complete all as specified and directed.
S&F 75mm dia PVC SWR branch bends of any radius with acess door complete all as specified and as directed.
S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.
S & F in repairs fancy type decorative Drapary rod of 20mm dia for window and doors with decorative doom holders fixed to wall with screw complete all as specified and directed.
Disconnecting existing tanks of capacity exc. 500 & n exc. 1000 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position complete all as specified and directed.
S&F rotational moulded polyethylene water storage tank, ISI marked, 500 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections like ball brass valves of 20mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 20mm bore GI tube complete all as specified in SSR Part-I and as directed.
M&L for preparation of surfaces plastered or unplastered new surface on wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care white putty complete all as specified and directed.
M&L for complete removal of existing finish, scrapping and making good surfaces on old surface of walls and applying two coat of oil bound distemper over a coat of 1mm thick wall care white putty all as specified and directed.
M&L for preparation of new surface including necessary scaffolding and applying finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as per manufacturers instructions and directed.
M&L for complete removal of existing finish and preparation of old plastered surface including necessary scaffolding and applying two coats of acrylic exterior paint over a coat of primer (brand apcolite Apex manufactured by Asian or Brand weather coat manufactured by Berger or equivalent as approved by GE) complete all as per manufacturers instructions and directed.
M&L for preparation of surface plastered or unplastered new surface on ceiling and applying three coats of white wash complete all as specified and directed.
M&L for preparation of surface plastered or unplastered old surface on ceiling and applying one coat of white wash complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new or previously untreated wood surfaces of any description not other wise described over 10 cm with or girth complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint including preparation of old decorated wood surfaces of any description not otherwise described over 10 cm with or girth complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed
Demolition and breaking up 75mm/110mm dia drain pipes(salt glazed ware,AC ,PVC or reinforced concrete) set in cement mortar including concrete bedding and haunching complete all as specified and directed.
M&L for 50mm thick averaging cement concrete type B0 (1:2:4) (using 12.5 mm graded stone aggregate) as in roof covering finished even & smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 mixed with WPC @ 3% by weight of cement over RCC roof slab while the concrete is still green finished even and smooth without using extra complete all as specified and directed. Note : WPC will be measured paid separately.
Material only for applying one coat of bitumen primer conforming to IS-3384 @ 0.40 Kg/sqm complete all as specified and directed.
Labour only for applying one coat of bitumen primer on finished plastered surfaces complete all as specified and directed.
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laying on primed surface by forced application complete all as specified and directed.
M&L for applying two coat Aluminium paint over APP based polymeric membrane or Surfaces of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed.
M&L for 20-25mm thick PCC tiles using grey cement of size 250x250x20-22mm or 300x300x20-22mm thick ISI marked set and jointed over including 15mm thick screed bedding mortar in CM(1:4) complete all as specified and directed.
Taking down carefully unserviceable aluminum/ copper point wiring (light/ fan/ socket/ power) complete including fixture & fitting such as switches, sockets, ceiling roses regulators, lamp holder etc. but excluding light fittings & fixture and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed.
Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated 1100 volts grade and unsheathed, multi-stranded, copper conductor single core cable through and including concealed wiring 20 mm pvc rigid conduit all fixing accessories and suitable including 1.6 mm thick size sunk MS pressed steel terminal modular box for mounting modular switches,sockets and regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) (a) One light/fan point controlled by one, one way switch
One ceiling/exhaust fan point controlled by one, one way switch
One socket outlet 5 Amps 5 pin on independent board
One socket outlet 5 Amps 3 pin on same board with other switch
All as per item No. 147.00 here-in-above but with cable size 2.5 Sqmm for one 3 pin, 15 Amps socket outlet on independent board and multistrand insulator copper earth continuity conductor of size 2.5 Sqmm complete all as specified and directed.
S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed.
S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed.
Supply and fixing modular Switch Socket 6/16 , 2/3 pin combined 2 module complete all as specified and directed.
S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.
S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed.
S&F modular white cover plate with frame for fixing of 8 module complete all as specified and directed.
S&F modular white cover plate with frame for fixing of 6 module complete all as specified and directed.
S&F modular white cover plate with frame for fixing of 3 module complete all as specified and directed.
S&F blank speacer plate for single module complete all as specified and directed.
S&F Modular step type regulator 12W, 2 module ,heavy duty, 240 volts complete all as specified and directed
Taking down old unserviceable main switch/ DBs/ MCB DBs with MCB including making good the disturbed surface complete as directed.
S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.
S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F MCB single pole 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S & F sheet metal enclosures vertical DB (for DB's when MCCB/MCBs to be used ) Triple pole and neutral double door, IP - 54, 1 way, 415 volts with rated bus bar of size phase 200 Amp and neutral 300 Amps including MCCB 4 pole , 63 Amps, 16 KA complete all as specified and directed.
Taking down / dismantling old unserviceable LED tube light fittings complete all as specified and directed.
S&F LED tube light fitting 20 W LED 6500K bright linea high quality material and design surface and wall mounted LED robust and high performance batten LED luminar comprises of extruded channel in thermally conductive materail glare and smooth light complete all as specified and directed .
S & F LED builidng security light fitting 20 Watt 230 V, AC out door type with hih pressure dia cast aluminium hosing and heat resistant complete with driver , lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Taking down ceiling/exhaust fan including dismantling all necessary electrical connections and kept in safe custody for refixing to its original position to facilitate repairs to ceiling/wall complete all as directed.
Refixing only ceiling fan (M D Supply) removed under item Srl No 33.00 here-in-above and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed.
Refixing exhaust fan removed under item Srl No 33.00 here-in-above and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed.
Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: Earth strip beyond 7.5 m length will be measured & paid separately)
Taking down old unserviceable submain wiring any size complete all as specified and directed.
M & L for submain wiring with single core 6.0 sqmm PVC FRLS insulated unsheathed cable multi stranded copper conductor drawn through and inclduing PVC casing / capping of suitable size with all fittings and fixing accessories on roof , walls, ceiling etc including 4.00 Sqmm PVC insulated unsheathered one core multistranded copper condutor earth wire complete all as specified and directed. (Note : Two run of single core cable and one run earth wire will be measured as one length)
SUBHASH CHAND GUPTA
M/S PRADEEP CONSTRUCTION
L BINOD CONSTRUCTION CO
M/s Ritz Marketing
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .