SITC AC___SALE TAX.

Amount

Dismantle the existing Indoor & Outdoor units,connecting Cu pipe lines,drain lines, metal cage,metal platform etc. and deposited to store of the section office from different places of the building by the agency's own arrangement ,mending good damages to building work with out disturbing day to days work as per direction of EIC.

Supply, Installation,Testing & Commissioning of split type AC machines having capacity Cooling Capacity range (6.6-7.0 KW), with fixed speed rotary compressor, cord less remorte with battery, refrigerant gas R32/R410 BEE star rating -2/3 (EER range 3.5 to 3.99),air-flow range CFM(760-850) both condenser and cooling coils made of copper tube connecting chord with plug top confirming to ISI 1391 (Part-I & Part-II) with all amendments incl. leak testing , brazing,gas charging if required as per direction of E.I.C (With/without refrigarant copper pipe as per manufacturer supply with the AC Machine)(Make-Mitsubishi Electric-MS-GK24VA/ Mitsubishi Heavy -SRK24 CW-S6/O-General -ASGA24BMAA-B)

Refrigeration Piping: Supply,Installation & commissioning of hard copper refrigerant piping, complete with fittings Elbows, Bends, supporting arrangement on walls incl wrapping with kenofoam sulation by 26 SWG aluminum sheet to make it vermin proof.for ductable split A.C. a) Liquid Line Hard CU, pipe minimum Thickness 1.15 mm. following Dia . [ Make Royku / Totaline/ Mandeep] with 13 mm. thick nitrile tube insulation. [ Make Aroflex / Acoflex] i) 1/4" OD with 0.6 mm thick Liquid Line.

b) Gas Line Hard CU, pipe minimum Thickness 1.15 mm. following Dia .[ Make Royku / Totaline/ Mandeep] with 13 mm. thick nitrile tube insulation.[ Make Aroflex / Acoflex] ii) 15.9 (5/8”)mm dia 0.6 mm Suction Line.

Supply and laying communication screened Cu. Cable ( Make. Havell's / Polycab / RR Kabel). (i)3- core 2.5 Sq.mm

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage for installation of ODUs ,PVC drain Pipe and MS structure for AC machine installation, per storey of building per vertical run.

Charges for MS Structure for 2.0 TR ODU installation Supplying, fabrication & fixing of M.S. platform supported by Angle iron of size of ( 50 mm x 50mm x 6mm) with length of 1.2 mtr three(03) nos for base of platform fixed with wall and lenght of 1.7 mtr three(03) nos for fixed with end point of base and wall .All of these six nos of angle iron should be welded with six(06) nos MS flat square plate of required size (150mm x 150mm and thickness with 8mm with four nos hole) and to be fixed on wall by 150mm length with M16 fastner and Hilti chemical mortar as per requirement. The platform should be fabricated with 10 (ten) nos of TATA 32 x 32 mm Square Carbon Steel Hollow Section 2 mm IS 2062 squre bar of 1.8 mtr length fixed in equal intervals for the said platform. Also making the safety grill by 3 nos 20 mm x 20 mm size with length of 4.5 mtr aprox Square Carbon Steel Hollow Section 2 mm IS 2062 squre bar throught the 3 side around the platform upto 1 mtr above the platform .These safety grill should be supported by 04(four) nos 1 mtr length 35mm x 35mm x5mm MS angle.The whole structure should be paint by 2 coats enamel paint. All these are descripted for each MS ODU structure. The entire structure must be safe to carry out maintenance of ODU as per direction of EIC.Complex work should be carried out as per direction of EIC

Supply & installation of 25 mm PVC drain pipe line (25mm/32mm OD,HD 1 mm thick) of the following size with 6 mm nitrile rubber insulation and with proper supports & brackets as per direction of E.I.C(Mk. Oriplast / Supreme) (a) 25mm dia

(-)Less cost for unserviceable dismantled materials of AC machines

NEW MODERN COOLING (BID ID -6719912)

P. M. COOLING AND ENGINEERING CO (BID ID -6730610)

Lyric International (BID ID -6721712)

MAA DURGA ELECTRIC CENTRE (BID ID -6704726)