REPAIR TO SUNKEN FLOORS, REPLACEMENT OF SANITARY FITTING INTERNAL WATER SUPPLY SOIL WASTE RAIN WATER PIPES FLOORING AND WALL TILING STEEL WOOD AND ALUMINIUM JOINERIES AND RELATED WORKS IN MD OR OTM ACCN AT DIAT AND MILIT GIRINAGAR PUNE

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing from site all as specified and directed.

M&L for rendering 15 mm thick in CM 1:3 mixed with 3% WPC by weight of cement to sunken portion incl walls of sunken portion with proper slope towards outside and finished the surface even and smooth without using extra cement complete all as specified.

M&L for Applying evenly a tack coat of hot blown bitumen 85/25 grade in two coats , one coat on plastwered surface and 2nd coat on polyetthlene film @ 1.20 Kg/Sqm each. Note : -Polyethylene film shall be measured and paid separately.

Supply and paste polyethylene film 150 micron thick (weight not less than 1410 gms per 10 Sqm).

M & L cement concrete in floor filling 1:5:10 E-2 using 40 mm aggregate for filling in sunken floors including removal of existing treatment.

Dismantling floor or wall tiling incl cement mortar bedding all as specified and directed.

M&L 25 mm thick Cement concrete 1:2:4 type B-0(12.5 mm graded stone aggre) as in sub base of floor all as directed .

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc.and joineted neat in cement slurry and pointed in white or colour cement to match over 15 mm thick screed bed in CM 1:6.

S&F, Glazed ceramic tiles Coloured (350 x 250/450x350x7 mm thick) or size as approved thick in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match rendering over 10 mm thick in CM 1:6 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfaces complete all as specified and directed.

S&F, Non skid ceramic tiles Coloured 7 to 8 mm (square/rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm in floors etc set and jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 .

S & F Non Skid ceramic tiles joint free 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortor 1:6

M&L coloured /light shade vetrified ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles not exc 0.36 sqm in floors etc and joineted neat in cement slurry and pointed in white or colour cement to match over 15mm thick screed bed in CM 1:6 .

S&F in repairs, vitreous china wash down water closet pan, (pedestal pattern), white, including 'P' or 'S' trap for 100 mm dia and connection to drain or outgoing pipe with plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by EIC

S&F in repairs vitreous china squatting pan , ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, embedded and set in cement mortor and making good to floor including removing rubbish .Make : Hindustan or Cera/parryware.

S&F in repairs 10 liters capacity PVC low level flushing cistern with ISI marked body, fixed in repairs complete all as directed and as specified. Make : Commander or Cera/slimline.

S&F in repair for Vitreous China wash basin, white, flat back, size 580x450mm including necessary brackets,cp couplings,MS fastener, 32 mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed. Make : Cera/hindustan/parryware.

S&F in repair for Pillar taps 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed Make : Sikho or equivalent

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm.

S&F two way bib cock brass chromimum plated fancy type make :Jaguar cat no. FLR-5041N and equivqlant Marc complete all as specified and directed.make-ss/parryware/seiko and equivalent.

S&F 15 mm bore fancy type brass chromium plated angle cock, cast copper alloy, screwed down, high pressure , screwed both ends for iron pipe or for unions complete all as specified and directed. Make-seiko/ss/parryware and equivalent

S&F in repair 15 mm bore brass chromium plated mixer for mixing hot and cold water screwed down for iron pipe fixed completre all as specified and as directed. Make : Sikho/parryware/ss or equivalent

S & F in repair Chromium plated shower roses with or without swivel joints, of 75mm size, including fixing to steel pipe or union

S&F in repairs 20mm dia chromium plated tubular towel rail, D type, 60cm long between flanges.

S&F PTMT hand shower ( Health faucet) with 8 mm dia 01 m long flexible tube and wall hook make-prayag

M&L Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms/20mm-125gms 15mm dia bore fixed in repair

S&F angle stop valve of PTMT any colour high pressure , screwed for 15 mm bore iron pipe fixed in repairs.

S&F in repairs 20 mm bore Ball valves high pressure of PTMT with Epoxy coated Alluminium rod & high density plastic ball secured for iron pipe .

S&F in repair rotational moulded poly thylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs all as specified in SSR part 1 and dismantling existing water tank of any description exc 250 but n.exc 500 ltr capacity .

S&F in repair rotational moulded polyethylene water storage tanks 1000 lts (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part 1 and dismantaling of existing t water tanks.

S&F 20mm dia gunmetal globe or gate valves with iron wheel head screwed both ends for iron pipe in repair

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc. 0.5 sqm in each pane .

All as per item no 33 but pin headed glass

Demolition and beaking up drain AC/PVC pipes set in cement mortar 100 mm and below

S&F PVC (SWR) 110 mm pipes single socketed, in any length with rubber ring joints laid in trenches wall or in floors.Note :- The rate quated by the contractor is including necessory scaffolding etc

All as per item no 36 but 75mm

S&F in repair PVC (SWR) 110 mm bends any radius with access door

All as per item no 38 but 75mm

S&F in repair PVC (SWR) 110 mm branch piece, single (single Y) equal or unequal

All as per item no 40 but 75mm

S&F in repair PVC (SWR), 110 mm junction single, (Single T) equal or unequal with acess door

All as per item no 42 but 75mm

S&F in repair PVC (SWR) 110 mm vent cowl

S&Fin repair SWR floor trap/nahani trap incl stainless steel gratings, 75 mm dia of outlet, including jointing to waste pipe fixed in cement concrete type B1(1:2:4).

Roughening surfaces of old concrete floor by picking sweeping cleaning & washing down with water to remove dust etc incl removal of old treatment of any description and applying one coat of neat cement slurry @ 3.00 Kg/Sqm complete all as directed by Engr-in-Charge.

M&L for Cutting grooves in brick wall, 75 mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3

PCC (1:2:4) type B1 using 20 mm graded aggregate as in padding (level course) on roof 40 mm thick (average).

Screeding 10 mm thick in CM (1:4) using water proofing compound as per manufacturer instruction over roof and chajjas finished smooth complete all as directed by Engr-in-Charge. Note : Water proofing compound will be measured and paid separately.

Supply only integral water proofing compound.

M &L for APP based polymeric membrane minimum weight 3.5Kg/Sqm and minimum 3mm thick reinforced with polyster non -eoven fabric (wt not less than 150gms/sqm ) laid over primed surface with bituminious primer confirming to IS 3384 @ 0.3 lit/Sqm as per IS 3384 and finishing with preventive coat (two coats) with aluminium paint over a coat of hot blown bitumen 85/25 grade @ 1.2 kg per sqm.

Taking up or down steel tubing 15mm bore and connections including cleaning for refixing or removing from site

All as per item 52 above but 20 mm bore pipe.

All as per item 52 above but 25 mm bore pipe.

Refixing old 15 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed to walls/ceiling or laid in floors making concealed all as specified and directed.

All as per item 55 above but 20 mm dia

All as per item 55 above but 25 mm dia

Supply and laying 15 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed to walls/ceiling or laid in floors making concealed all as specified and directed.

All as per item 58 above but 20 mm dia

All as per item 58 above but 25 mm dia

S&F in repair galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples/necessary wooden beadings & metal flats as required.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site.

Taking down shutters of any description n. exc. 2 sqm each.

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions all as directed by Engineer-in-Charge.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site as per specification & drawing.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type both sides (ISI marked) all with 6 mm thick teak wood edging all round.

S&F 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats.

M&L for preparation of new wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed

S&F stainless steel butt hinges of size 100mm.

S&Fmedium weight,butt hinges of size 100mm.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

All as per item 72 above but 150 mm dia

S&F extruded aluminium alloy handles, fabricated type, anodized of size 150 mm.

Demolition of stone slabs and tiles of any description or thickness in floors and aprons etc. laid, bedded and pointed in any mortar.

M&L machine cut Granite slab 18 mm thick as in steps, pillars, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2:3mm thick, set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as spd.Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as spfd.

S&F anodized aluminium powder coated of any colour (thickness of powder coating not less than 50 micron), in frame and shutters for doors , windows, ventilators, partition wall etc. with one or more rebates, shutters, grills including joining cleat glazing clips for fixing etc. complete all as specified.

S&F 18 mm thick, prelaminated particle board, ISI marked, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work for doors, partitions, on wall, in cup boards//kitchen cabinets etc., in shelves, partitions and shelves of built in cup board, almirah, book case, toilet boxes, racks, pelmets etc. and similar works.

S&F in repairs steel windows with side hung shutters including box type hinges including locking arrangements and peg stay complete with glazing bars dovetailed or welded.

Supply and fix aluminium (powder coated ) three track sliding window comprising of one set of fly proof shutter and two set of glazed shutter with frames of size 92.00mm x31.75mm x 1.50mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement all as specified and directed. (Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint(Make of Aluminium Sections powder coated : Jindal or equivalent of INDAL).

S&F 100 mm dia grating doom of stainless steel with frame all as specified

S& Fixed in repaires Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe)

Dismantling the Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F MS Tubes/angle medium grade fixed independently without connecting plates as in purlins/truss etc all as specified and directed.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as of roof covering/ridges fixed with self tapping screws as specified and as directed.

M&L for 2 coats of synthetic enamel paint over a coat of red oxied primer including preparation of new steel surface of any description over 10 cm width and girth.

S&F Venition blinds of approved colour on inner/outer face roll down type made out of fibre cloth fixed, to wall with necessary Aluminium brackets, screws etc including Alluminium frame for venilion blinds etc fixed as in repair all as approved by GE all as specified and directed. Make : Vista and Levador or Equivalent

S&F Venition blinds of approved colour on inner face verticle type made out of fibre cloth fixed, to wall with necessary Aluminium brackets, screws etc including Alluminium frame for venilion blinds etc fixed as in repair all as approved by GE all as specified and directed. Make : Vista and Levador or Equivalent

Material & Labour for 50mm thick plain cement concrete C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection finished fair and even without using extra cement complete all as spd & directed. Note:- The plinth protection shall be laid in pannels and length of the each panel shall not be more than 2.00 mtr all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the above item.

Taking down and Easing of door shutters of any size for easy closing / opening end tightening of butt hinges in position including changing of unserviceable existing butt hinges, adjustment of butt hinges in position, adjustment of existing iron mongery, welding etc. and re-fixing in same opening complete all as specified and directed.

Taking down and Adjusting/ repairing of steel window shutters for easy closing/ opening including greasing, welding and adjustment of projecting type friction hinges in any position make fully functioning complete all as specified and directed.

Taking down Aluminium shutters of any description or any size and re-fixing in same opening after re-securing or easening and adjusting including repair of hinges, operated systems, anchoring bolts and erecting in position and making fully functional as directed complete all as specified & directed.

M&L for mirror polished Kota stone slab 20-25mm thick in Tread of steps in single pieces incl two numbers of grooves of size 3mmx3mm and rounding to edge, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishing with and incl 10mm thick screed in CM(1:4) complete all as specified and directed by Engr-in-charge.

M&L for mirror polished Kota stone slab 20-25mm thick in riser or skirting of steps in single pieces laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishing with and incl 10mm thick screed in CM(1:4) complete all as specified and directed by Engr-in-charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets/AC boards, any thickness, including cover fillets.

S&F of mineral fibre acoustic suspended ceiling system with prima fine fissured (K2C2) tile with semi concealed grid , the tile should have humidity resistance (RH) of 99% , NRC upto 0.6, light reflectance> 83%, thermal conductivity K= 0.052 to 0.057 w/m, colour white fire performance class O/class 1 (BS476 part6 &7) in module sizeof 600x 600x16 mm with Bio block coating on the face of the tile, impact resistant and suitable for green bldg application, eith recycled contentof 63 %. The tile shall be laid on semi concealed grid system with 15 mm white flange incorporating 6 mm central reveal/Flat in white/black colour and with web height of 38 mm and load carring capacity of minimum 11.68 kg/sqm.Silhouette. main runner and cross tees to have mitred ends & birdmouth notches to provide mitred cruciform junction. The T sections have galvanising of 120 gms/sqm and passed through 500 hrs of salt test. and hangers 4 mm dia G.I (up to 1200 mm length ) adusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40x3mm size 60 mm long complete all as specified . and the tile and grid system used together should carry a 10 year warrantee ( Make : armstrong, saint Gobain)

ELIEYAS TRADERS

J.G.Goel