Fabrication, Installation, Testing and Commissioning of 2 ton capacity overhead gantry and providing and fixing of 2 ton capacity chain pulley block at Water Supply Scheme Doodhpathri Budgam

Amount

Fabrication, Erection, Testing and Commissioning of 2 Ton Capacity Overhead gantry made out of 125mm dia G.I. pipe (available at site). The job includes fabrication of 16 feet high two vertical posts to be grouted in cement concrete 3 feet below ground level after excavation of 2ft x 2ft x 3ft trench by suitable means. The job further includes fitting of horizontal post of 16ft length on the vertical posts with the help of welding on the sole plates at the top. The job also includes fitting of 6”x6” and 8mm thick sole plates at the top and the bottom of the vertical posts. All the tools and tackles involving in the job shall be provided by the firm.

Providing and fixing of chain pulley block having following Specifications Make = INDEF/Globe/Pull lift/ Equivalent Capacity = 2MT No. Of chain falls = 4 Min. Height of lift = 6 M Gears: - The hoist shall have precision cut spur and helical gears made of alloy steel mounted on bearings and housed in a dust proof gear box. The lubrication of gears should be of high viscosity and temperature for longer life of gears. Load Chain: - The load chain shall be made of high tensile alloy steel having wear resistance and greatest mobility. The chain should be accurately collaborated, tested and should have adequate in built factor of safety for safer operation. Load chain wheel:- Specially designed, perfectly machined wheel providing correct grip of load chain made of malleable cast iron makes the hoist most safe and reliable against any failure. The job also includes P/F of steel wire rope (10mm) 3 mtrs for chain pulley block.

M/S BHAT ENTERPRISES