CONVERSION OF OLD ALUMINIUM POINT WIRING INTO COPPER WIRING OF OTM AND MD ACCNS UNDER AGE E/M (SOUTH) OF GE (SOUTH) SECUNDERABAD (PHASE-I)

Amount

Taking down existing unserviceable point wiring of any type/ size of light/fan/socket/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site area complete all as specified and as directed.

Taking down existing unserviceable light fittings,security light fittings,bulk head fittings,fall ceiling light fittings etc. from any height of building complete all as specified and as directed.

Taking down existing unserviceable MCCB's/Distribution boards/AC box any capacity complete all as specified and as directed.

M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLSH cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20 mm bore with conduit accessories concealed in wall /floor and fixed on ceiling/roof/truss/columns etc, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti corrosive paint for housing the switches, sockets, fan regulators etc and covered with 3mm thick plastic laminated sheet cover with cadmium plated screw, cup washer etc. complete concealed in walls and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc for one light /ceiling fan/exhaust fan point controlled by one switch complete all as specified and as directed. Note (1) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (2) The cost of cutting of chases of required width and depth for concealled conduit incl plastering, making good to disturbed surface, painting two coats to match the existing wall colour is deemed to be included in the quoted rate by the contractor.

All as per Sl item No 4 above, but for One 5 Amps socket outlet point on the independent board complete all as specified and as directed.

All as per Sl item No 4 above, but for One 5 Amps socket outlet point on the same board complete all as specified and as directed.

All as per Sl item No. 4 here in before, but for One Bell point controlled by one, bell push complete all as specified and as directed.

All as per Sl item No4 above but for One light point controlled by two way switch complete all as specified and as directed.

All as per Sl item No 4 above, but 2.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLSH cable for one 15 Amps socket out let point complete all as specified and as directed.

M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded ,copper conductor FRLSH cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade , ISI marked , 20 mm bore with conduit accessories for Modular surface wiring mount on wall or fixed on ceiling/roof/truss/columns etc, including provision of branded modular PVC terminal box of suitable sizes with 1.6mm thickness including modular cover frame & box of suitable size for modular switch boards any size of modules for housing modular switches, sockets, fan regulators etc and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc for one light /ceiling fan/exhaust fan point controlled by one switch complete all as specified and as directed. Note (1) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth.

All as per Sl item No. 10 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent modular board complete all as specified and as directed.

All as per Sl item No. 10 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same modular board complete all as specified and as directed.

All as per Sl item No. 10 here in before, but for One Bell point controlled by one, one way modular switch 5 amps, SP complete all as specified and as directed.

All as per Sl item No. 10 here in before, but for One light point controlled by two 2 - w a y modular s w i t c h 5 amps, SP complete all as specified and as directed.

All as per Sl item No 10 above, but 2.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLSH cable for one 15 Amps socket out let independent point complete all as specified and as directed.

All as per Sl item No 10 above, but 2.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLSH cable for one 15 Amps socket out let Same board point complete all as specified and as directed.

M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded ,copper conductor FRLSH cable of 1100V grade drawn through and including new non metallic rigid PVC concealed conduit medium grade , ISI marked , 20 mm bore with conduit accessories for wiring concealed in wall, including provision of fabricated branded pressed steel terminal box concealed of suitable sizes with 1.6mm thickness including modular cover frame & box of suitable size for modular switch boards/sockets/regulators of any size modules for housing modular switches, sockets, fan regulators etc and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc for one light /ceiling fan/exhaust fan point controlled by one switch complete all as specified and as directed. Note (1) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (2) The cost of cutting of chases of required width and depth for concealled conduit incl plastering, making good to disturbed surface, painting two coats to match the existing wall colour is deemed to be included in the quoted rate by the contractor.

All as per Sl item No. 17 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent modular board complete all as specified and as directed.

All as per Sl item No. 17 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same modular board complete all as specified and as directed.

All as per Sl item No. 17 here in before, but for One Bell point controlled by one, one way modular switch 5 amps, SP complete all as specified and as directed.

All as per Sl item No. 17 here in before, but for One light point controlled by two 2 - w a y modular s w i t c h 5 amps, SP complete all as specified and as directed.

All as per Sl item No 17 above, but 2.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLSH cable for one 15 Amps socket out point independent board complete all as specified and as directed.

All as per Sl item No 17 above, but 2.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLSH cable for one 15 Amps socket out let Same board point complete all as specified and as directed.

M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded ,copper conductor FRLSH cable of 1100V grade drawn through existing rigid PVC concealed conduit including provision of fabricated branded modular pressed steel terminal box concealed of suitable sizes with 1.6 mm thickness including modular cover frame of suitable size for modular switch boards/sockets/regulators of any size of modules configuration for housing modular switches, sockets, fan regulators etc and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point/fan point/bell point/ 3 pin socket out let 6 Amps point on same, independent board controlled by one switch/2 way switch point controlled by two switch complete all as specified and as directed. Note (1) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (ii)The cost of cutting of chases of required width and depth for concealled modular sunken box incl plastering, making good to disturbed surface, painting two coats of distemper to match the existing wall colour is deemed to be included in the quoted rate by the contractor.

All as per Sl item No 24 above, but 2.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLSH cable for one 15 Amps socket complete all as specified and as directed.

S & F in repair switch piano single pole flush type 6 amps, 230 volts complete all as specified and as directed.

S & F in repair switch piano single pole flush type 16 amps, 230 volts complete all as specified and as directed.

S & F in repair single pole Modular switch 1 way 6 Amps, 1 Module complete all as specified and as directed.

S & F in repair single pole Modular switch 1 way 16 Amps, 1 Module complete all as specified and as directed.

S & F in repair Switch piano two way flush type 6 Amps capacity 230 volts complete all as specified and as directed.

S & F in repair Modular switch 2 way 6 Amps, 1 Module complete all as specified and as directed.

S & F in repair bell push 5 A flush type complete all as specified and as directed.

S & F in repair Modular Bell Push 6A, 1 Module with bell symbol complete all as specified and as directed.

S & F in repair Socket modular type multipurpose 2/3 Pin, 6 amps, 230 volts 2 Module complete all as specified and as directed.

S & F in repair Socket modular type multipurpose 3/6 Pin, 16 amps, 230 volts 2 Module complete all as specified and as directed.

S & F in repair Socket flush type multipurpose 2 in 1, 3 Pin, 6 amps, 230 volts complete all as specified and as directed.

S & F in repairSocket flush type multipurpose 2 in 1, 3/6 Pin, 16 amps, 230 volts complete all as specified and as directed.

S & F in repair Switch socket combination flush type multipurpose 2/3 pin 6 amps 2 in 1 230 Volts without point wiring complete all as specified and as directed.

S & F in repair Switch socket combination 5 in 1 multipurpose 3/5 pin 16 amps flush typewith without point wiring complete all as specified and as directed.

S & F in repair Modular ceiling fan regulator stepped socket size, 2 module suitable to work on 230 volts complete all as specified, complete all as specified and as directed

S & F in repair Electronic type fan regulator socket type single module, suitable to work on 230 volts complete all as specified and as directed.

S&F in repair calling bell ding dong working on 230 volts AC with different ring tones optional complete all as specified and as directed.

S & F in repair ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed.

S & F in repair lamp holder any angle insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as specified and as directed

Supply and replace Plug top 5 Amps 3 pin 250 Volts complete all as specified and as directed.

Supply and fix Plug Top 3 pin 15 Amps for storage geyser including removal of existing plug top complete all as specified and directed.

Supply and fix inreplacement of unserviceable gang box wtih modular Gang box 5 Amps modular switch socket complete all as specified and as directed.

Supply and fix inreplacement of unserviceable gang box wtih modular Gang box 15 Amps modular switch socket complete all as specified and as directed.

M&L for replacement of old unserviceacble light fitting with LED batten light fitting 20 Watts 4 feet surface / wall mounted aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy not less than 120 Lumen/Watt, rated llife 50000 Burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and as directed. Make: Crompton CCS-100-20-65-HSL2-DP-NWH/ Havells ENDURALINEARPROBS20WLED865PCSSIND/Bajaj-BCLAB20WCWLEDXT

S & F In replacement of old unserviceable light fittings with new LED batten light fitting of capacity 40 Watt 4 feet, with rated life 50000 burning hours , efficacy 120 lumen/watt , colour temperature 6500 K IP 20 and polycarbonate/ Aluminium material complete including two connector blocks complete with all accessories internally prewired incl connecting up two core wire complete all as specified and as directed. Make: HAVELLS LUMILINEPLUSBS40WLED865SPCSSIND / PHILIPS BN021CLED40SLED / WIPRO LL24-541-XXX-57-CD

All as per item no 50 but LED batten light fitting10 Watts 2 feet surface / wall mounted efficacy not less than 100 Lumen/Watt rated life 25000 burning hours complete all as specified and as directed. Make:Crompton CCS-103-10-65-SL-DP-NWH/ Havells LHEXAZP7PN1W010 / Bajaj-BCLAB10WLEDCWLED

S & F recess mounting LED light fitting 2' x 2' of capacity 36 Watts powder coated white CRCA full glow,efficacy 120 lumen/watts rated life 50000 burning hours suitable for false ceiling pop/grid ceiling including making electrical connection from ceiling rose to light fitting complete all as specified and as directed.Make:Crompton: LCTLRP-36-FO-CDL / HAVELLS VENUSEXL2X2PLR36WLED865SWH /Bajaj-BZRSQL43LXEWHODSD

M&L for replacement of old unserviceacble light fitting with LED light fitting 10Watts bulkhead luminaires, efficacy not less than 100 lm/w, rated life 25000 burning hours including LED light driver holder connecting up with three core flexible copper conductor cable IP 65 out door type metal body of suitable size ccomplete all as specified and as directed. Make: Crompton CIS-306-10-57-SL-DP-NBK/ HAVELLS HEXAFT10WLED857SSYMBOPC /Bajaj-BIBWP10W LED

M&L for replacement of old unserviceacble light fitting with LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant,efficacy not less than 120 lm/Watts,rated life 50000 burning hours complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete suitable for pop/grid false ceiling in complete all as specified and as directed. Make:Crompton TRP-409-45-57-SL-GL-NSG / HAVELLS ENDURASUNDOWNSL45W LED765PASYBOPC /Bajaj-VISTAP45LWHPOPCSD

S & F 15 Watt LED Bulb 3 star rated efficacy not less than 100 Lumen/watts,rated life 25000 burning hours with lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings including taking down the old unserviceable complete all as specified and as directed.

S & F LED Bulb 7 watts 3 star rated efficacy not less than 100 Lumen/watts,rated life 25000 burning hours with lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings including taking down the old unserviceable complete all as specified and as directed.

Fixing only TPN DB 4 way double door horizontal sheet metal enclosure MCB distribution board of any type and size in replacement including disconnection of all electric cables and reconnection of the all cables in DBs complete all as specified and as directed . Note: Item will be issued under Sch 'B' free for fixing form the department.

Fixing only SPN DB 12 way double door horizontal sheet metal enclosure MCB distribution board of any type and size in replacement including disconnection of all electric cables and reconnection of the all cables in DBs complete all as specified and as directed . Note: Item will be issued under Sch 'B' free for fixing form the department.

S & F in replacement of TPN DB 4 way double door vertical load line with provision of incoming as MCCB, made out of CRCA sheet housing duly powder coated & confirming to IS specification with busbar rating not less than 160 A complete all as specified and as directed .

S & F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) complete all as specified and as directed.

S & F in repair MCB SP 6 to 40 Amps 240 volts C type with rupturing capacity 10 KA complete all as specified and as directed.

S & F in repair MCB SPN 40 to 63 Amps 240 volts C type with rupturing capacity 10 KA complete all as specified and as directed.

S & F in repair MCB TPN,63 Amps, rupturing capacity 10 KA 415 volts suitable for fixing in existing DB of any capacity complete all as specified and as directed.

S&F in repair MCCB 415V, 16KA, 100 amps 4 Pole, thermal magnetic release fixedtype,short circuit and over load protection suitable for DB including removing the existing unserviceable one complete all as specified and as directed.

S&F in repair MCCB 415V, 16KA, 63 amps 4 Pole thermal magnetic release fixedtype,short circuit and over load protection suitable for DB including removing the existing unserviceable one complete all as specified and as directed.

S & F twin core flexible twisted copper conductor wire 1.1 KV for Phase (Red) and neutral (Black) of size 0.5 Sqmm for connecting light/switch /socket etc. as per site requirement including taking down old unserviceable one complete all as specified and as directed.

S & F Submain wiring with 2 runs of single core 4 sqmm PVC insulated FRLSH multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC concealed / Surface conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 4 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed. Note:-(1) The wiring shall be done in proper color coding using red,yellow,blue for phases , black for neutral and green for earth (2) The cost of cutting of chases of required width and depth for conduit incl plastering ,painting two coats to match the existing wall colour is deemed to be included in the rate quoted rate. (3) The three runs of copper wire one run of PVC coduit is shall be measured as one running meter.

All as per item no 67 above but 2 runs of single core 6 sqmm PVC insulated FRLSH multistranded 1100 volts grade wire, copper conductor complete all as specified and as directed.

All as per item no 67 above but 2 runs of single core 1.5 sqmm PVC insulated FRLSH multistranded 1100 volts grade wire, copper conductor complete all as specified and as directed.

All as per item no 67 above but 4 runs of single core 10 sqmm PVC insulated FRLSH multistranded 1100 volts grade wire, copper cable and one run of single core 10 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor complete all as specified and as directed.

SRI LAXMI SREENIVASA BUILDERS (BID ID -3407013)

Charan sales and Service (BID ID -3407163)

SRI SAI RAM ENTERPRISES (BID ID -3406259)

COSMO ELECTRICALS (BID ID -3413548)