REPAIRS TO DRAINS , CULVERTS,SMALL ARM RANGE AT DOMESTIC AND TECH AREA AT 25 ED AF STN DEOLALI

Amount

M&L for seiving of fine sand and saw dust mix and removal of excess size granulars & waste materials and spreadinig the mix of fine sand saw dust material as per required gradient placing in that manner if 16mm plain bar drop from 1mtr hight it will be penetrate into the spreading saw dust and fine sand material upto 900mm also adding additional saw dust and fine sand to maintained the level in ratio of 1:1 as directed by Engr-in-Charge. Note:- Payment of fine sand & saw dust measured and paid separately at separate item.

Supply only fine sand as directed by Engr-in-Charge

Supply only fine saw dust as directed by Engr-in-Charge

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars but excluding ashlar facing, dressed stone work and precast concrete articles etc all as specified & as directed by Engr-in-Charge.

Taking down cement plaster of any description, on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete.

M & L for rendering 15 mm thick in CM 1 :4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed .

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed .

Removing excavated material in any type of soil exceeding 250 metre but not exceeding 500 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

M&L for Cement concrete 1:4:8 Type-D2 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed .

M & L for brick work with sub-class `B' bricks Old size , straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6.

M& L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in Cement mortar 1:6

M&L for Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling,uncoursed or brought upto courses complete all as specified and directed .

M & L for rendering 15 mm thick in CM 1 :4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing finished even and smooth without using extra cement complete all as specified & directed by Engr-in-Charge.

M&L for Cement concrete 1:2:4 Type-B1(using 20mm graded aggregate) as in surface channels and drains complete all as specified and directed .

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement , including forms, moulds, mitred/stopped ends etc

M&L for Providing Cement concrete 1:2:4 Type-B1(using 20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs ,back filling of PS frame, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed (including necessary form work) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars and similar work conforming to Fe.290, Gde-E-265 complete all as specified and as directed.

M&L Preparation of new previously untreated steel surfaces of any discription ,n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Providing precast ce- ment concrete 1:2:4 Tybe B-1 with using 20mm graded stone aggregate as cover slabs (for man hole etc) chullah hoods, chajjas, water troughts, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 including necessary use and waste from works etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for mild steel TMT steel bars 6mm to 8mm dia and over, cut to length, bent to shape required including cranking, bending and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M/S KANNANS (BID ID -3110596)

M/S Nilesh Enterprises (BID ID -3104659)

N.U. MIRZA (BID ID -3108528)

SHREE SAMARTH SERVICES (BID ID -3103659)