Estimate for extension work (200 KVA DTR and 11 KV Line - 0.010 KM) to provide PS to New 66 KW Connection of INDIAN OIL CORPORATION LIMITED FUEL CENTRE (DS1750068863059) At Mihona Road Ron Under Ron D/c OandM Div Lahar.

D.O.Mounting Channel 75x40x6mm

D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel

XLPE Cable 1 core unarmoured 150 sqmm Aluminium conductor 1100 Volts

Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box

AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.)

11 KV Single pole cut point fitting 100x50x6 mm channel

11 KV Strain hardware (T&C type) fittings

11 KV Pin Insulator Polymer Composit (5 KN)

XLPE Cable 1 core unarmoured 300 sqmm Aluminium conductor 1100 Volts

11 KV AB Switch Polymer type 400 Amp with Complete fitting

11 KV D.O. Fuse Unit Polymer type

11 KV(45KN) Composite Polymer Disc Insulators

9 KV Gapless type ( 5KA) Polymer for DTR

BIS certified Energy Efficiency Level-III (Old)/Level-II (New) Convential 11/0.433KV, 200 KVA Distribution Transformer

H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-11 mtr. Long = 408.1 kg

AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.)

Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG)

STAY WIRE 7/3.15 MM.(7/10 SWG)

G.I. STRIP 25X3 MM1

Red oxide paint

Complete jumpering of DTR

Galvanized nut & bolt with washer

Bi-metallic clamps Distribution Transformers Bushing

DTR S/s fencing (37 feet) of 6' with on MS Angle(50x50x6mm) 7No, 7'Height

Double Gate (2No-2.5'x5x) set of MS angle (25x25x4mm) with mesh & locking

Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC

LT distribution box with 1.2 mm thick MS powder coated sheet, 315 A MCB on incoming & 6 no. 250 A HRC fuse base including 200 A HRC fuse , For 200 KVA Transformer

Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor

M.S.Nuts with Bolts

Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg)

Concreting of structures & foundation (1:3:6).

Stone Block/Pre cast block for base pedding(450X450X75MM)

Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels

Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg)

G.I.Pipe 40 mm Dia C grade type

Danger Boards Enamelled 11 KV

Stay set complete without Stay wire 16 mm. (Painted)

Transformer mounting Channel (100X50x6 mm.)

Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay

Bentonite compound powder

Aluminium paint

Final amount of Labour charges (Company Side and Contractor Side)

Final amount of Transport charges (Company Side and Contractor Side)

GST on Transportation 5%

GST on (Material + Labour) 18%

Please Enable Macros to View BoQ information