Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.5 LAccepted-AOC N A | NEW DELHI | DELHI | 110001 | L1 | Accepted-AOC QUOTED AMOUNT IS REASONABLE | |
| 2 | L2₹54.8 L+₹9.2 L (20.1%)Rejected-Finance PLOT NO 26 1ST FLOOR PRATAP NAGAR NEAR JAIL ROAD NEW DELHI 110064 | NEW DELHI | NEW DELHI | DELHI | 110064 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹56.5 L+₹10.8 L (23.7%)Rejected-Finance C 204 NANGLI EXTN NEW DELHI | WEST | DELHI | 110043 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹60.3 L+₹14.6 L (31.9%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹62.5 L+₹16.8 L (36.8%)Rejected-Finance WZ 199 LAJWANTI GARDEN GALI NO 4 NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | L5 | Rejected-Finance OTHER THAN LOWEST |
| Sl No | Description | Qty | Unit | kailash chawla L4 | M/S Rohit Enterprises L1 | Vipul Construction L6 | S GOURAV PRAKASH ENTERPRISES L3 | Shivam Firetech Engineers L2 | M/S MSD & Associate L5 | M P TYAGI ENGINEERS AND CONTRACTORS L7 | M/S SIMRAN CONSTRUCTION CO L8 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for complete removal of existing treatment from old decorated wall/ceiling by scraping with mechanical vaccum based sanding machine (wall sanding machine with internal dust extraction system & having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7 ich/ 9 inches to make the surfaces free from dust, loose paint etc by using smart periodical methodology/auto roller, while authorise applicater complete in all respect as specified and directed by Engr-in-charge | 12,000 | Sqm | 10 ₹1,20,000 | 5 ₹60,000 Lowest | 10 ₹1,20,000 | 7 ₹84,000 | 10 ₹1,20,000 | 20 ₹2,40,000 | 19 ₹2,28,000 | 8 ₹96,000 |
| 2.00 | M&L for applying water proof cement based putty @ 1kg/sqm of avg thickness 1mm over the plastered /old painted wall/ceiling surface even and smooth complete and sanding the putty surface with mechanical wall sander(having mechanical vaccume mechanism having RPM not less than 1500, sanding pad of 240 or above to make the surface free from dust by authrised applicater complete in all respect as specified and directed by Engr-in-charge and as per following:- step:1. mix the putty powder by adding water as per manifacturer instruction and mix it with putty mixture with mixing capacity of min 2.5kg putty/min. 2. Apply the first coat of prepare mixture with the help of fully automatic airless spray machine of putty application having flow speed of max 6lits/min with a max pressure of 3300PSI. 3. Allow 6-8 Hrs time to dry putty surface. | 12,000 | Sqm | 30 ₹3,60,000 | 10 ₹1,20,000 Lowest | 22 ₹2,64,000 | 22 ₹2,64,000 | 16 ₹1,92,000 | 35 ₹4,20,000 | 39 ₹4,68,000 | 55 ₹6,60,000 |
| 3.00 | M&L for preparation of old treated surface and applying one coat of oil emulsion distemper on wall surface using airless spray technology with max working presssure of 3300PSI and capable to operating single spray gun with max material whole length of 30mtr. The spray machine should be reported manufacturer with pro-gaurd technology and capability of tracking pressure and paint uses and certified by paint manufacturer and accesosries for applying distemper should be able to spray in hard to reach areas penetration of distemper on the surface by smart periodical methodology/ auto roller, complete in all respect as specified and directed by Engr-in-Charge. | 5,000 | Sqm | 25 ₹1,25,000 | 15 ₹75,000 Lowest | 28 ₹1,40,000 | 25 ₹1,25,000 | 16 ₹80,000 | 50 ₹2,50,000 | 29 ₹1,45,000 | 55 ₹2,75,000 |
| 4.00 | M&L for applying priming paint followed by two coat of internal emulsion paint, anti-fungal and anti-bacterial (Asian- Royale or equivalent of approved make as approved by GE) on wall surfaces using airless spray technology with max working presssure of 3300PSI and capable to operating single spray gun with max material whole length of 30mtr. The spray machine should be reported manufacturer with pro-gaurd technology and capability of tracking pressure and paint uses and certified by paint manufacturer and accesosries to be able to spray in hard to reach areas penetration of paint on the surface by smart periodical methodology/ auto roller, complete in all respect as specified and directed by Engr-in-Charge. | 8,000 | Sqm | 80 ₹6,40,000 | 35 ₹2,80,000 | 58 ₹4,64,000 | 30 ₹2,40,000 | 35 ₹2,80,000 | 70 ₹5,60,000 | 29 ₹2,32,000 Lowest | 66 ₹5,28,000 |
| 5.00 | All as per ser item No.4 above but on ceiling surface. | 4,000 | Sqm | 10 ₹40,000 Lowest | 30 ₹1,20,000 | 52 ₹2,08,000 | 30 ₹1,20,000 | 28 ₹1,12,000 | 70 ₹2,80,000 | 29 ₹1,16,000 | 44 ₹1,76,000 |
| 6.00 | M&L for preparation of old surfaces and applying one coat of plastic emulsion paint on walls by using smart periodical methodology complete all as specified and as directed by Engr-in-Charge | 4,000 | Sqm | 50 ₹2,00,000 | 25 ₹1,00,000 Lowest | 28 ₹1,12,000 | 28 ₹1,12,000 | 25 ₹1,00,000 Lowest | 40 ₹1,60,000 | 49 ₹1,96,000 | 55 ₹2,20,000 |
| 7.00 | M&L for complete removal of existing treatment from old decorated walls by scraping with mechanical sander of asian paints trucare wall sander or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scarping tools where mechnical removal is not possible complete all as specified and directed by Engr-in charge and two coat of weather proofing exterior emulsion paint (Apex Ultima Luxury emulsion of Asian or equivalent of approved make as approved by GE) incl one coat of exterior primer up to 5 story bldg by using smart periodical methodology (spray machine) complete all as specified and directed. Note:- rate quoted up to G+4 bldg including scaffolding. | 12,000 | Sqm | 80 ₹9,60,000 | 50 ₹6,00,000 | 58 ₹6,96,000 | 63 ₹7,56,000 | 50 ₹6,00,000 | 60 ₹7,20,000 | 49 ₹5,88,000 Lowest | 66 ₹7,92,000 |
| 8.00 | M & L for complete removal of existing treatment from old decorated wall surface scrapping by electrically operated grinder machine from decorated wall surface by scrapping and applying a coat of cement based wall care putty on complete surface and applying a roller texture finish of approved shade/colour/pattern/texture over incl a coat of oil based primer complete all as per specified and as directed. | 200 | Sqm | 25 ₹5,000 Lowest | 600 ₹1,20,000 | 450 ₹90,000 | 150 ₹30,000 | 550 ₹1,10,000 | 25 ₹5,000 Lowest | 29 ₹5,800 | 44 ₹8,800 |
| 9.00 | M&L for preparation of old painted wood or wood based surface of any description over 10cm width or girth by removing all dirt,dust,rust and grease,stopping and filling the holes and patches the requisite surface and applying one coat of synthetic enamel paint by using smart periodical methodology/ auto roller, complete in all respect as specified and directed by Engr-in-Charge. | 400 | Sqm | 30 ₹12,000 | 25 ₹10,000 Lowest | 28 ₹11,200 | 28 ₹11,200 | 26 ₹10,400 | 35 ₹14,000 | 29 ₹11,600 | 35 ₹14,000 |
| 10.00 | M&L preparation of old painted steel and iron surface of any description not otherwise described over 10 cm width or girth by removing all dirt,dust,rust and grease,stopping and filling the holes and patches and painting with one coat of synthetic enamel paint by using smart periodical methodology/ auto roller, complete in all respect as specified and directed by Engr-in-Charge. | 300 | Sqm | 30 ₹9,000 | 20 ₹6,000 Lowest | 28 ₹8,400 | 28 ₹8,400 | 26 ₹7,800 | 35 ₹10,500 | 29 ₹8,700 | 35 ₹10,500 |
Tender Value
₹95 L
EMD Value
₹1.7 L
Closing Date
4 Oct 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE DELHI CANTT
HQ CWE DELHI CANTT 110010
EXTERNAL AND INTERNAL PERIODICAL SERVICES AND CONNECTED ITEMS IN CERTAIN BUILDING AT ZONE A AND ZONE B AT BHDC UNDER GE EAST DELHI CANTT
2025_MES_727796_1
CWE/D-47/2025-26
Open Tender
Civil Works
Item Rate
270 days
DELHI CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE EAST DELHI CANTT
₹1.7 L
Yes
13 Dec 2025
26 Aug 2025
6 Oct 2025
26 Aug 2025
4 Oct 2025
20 Sept 2025
Amount
M&L for complete removal of existing treatment from old decorated wall/ceiling by scraping with mechanical vaccum based sanding machine (wall sanding machine with internal dust extraction system & having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7 ich/ 9 inches to make the surfaces free from dust, loose paint etc by using smart periodical methodology/auto roller, while authorise applicater complete in all respect as specified and directed by Engr-in-charge
M&L for applying water proof cement based putty @ 1kg/sqm of avg thickness 1mm over the plastered /old painted wall/ceiling surface even and smooth complete and sanding the putty surface with mechanical wall sander(having mechanical vaccume mechanism having RPM not less than 1500, sanding pad of 240 or above to make the surface free from dust by authrised applicater complete in all respect as specified and directed by Engr-in-charge and as per following:- step:1. mix the putty powder by adding water as per manifacturer instruction and mix it with putty mixture with mixing capacity of min 2.5kg putty/min. 2. Apply the first coat of prepare mixture with the help of fully automatic airless spray machine of putty application having flow speed of max 6lits/min with a max pressure of 3300PSI. 3. Allow 6-8 Hrs time to dry putty surface.
M&L for preparation of old treated surface and applying one coat of oil emulsion distemper on wall surface using airless spray technology with max working presssure of 3300PSI and capable to operating single spray gun with max material whole length of 30mtr. The spray machine should be reported manufacturer with pro-gaurd technology and capability of tracking pressure and paint uses and certified by paint manufacturer and accesosries for applying distemper should be able to spray in hard to reach areas penetration of distemper on the surface by smart periodical methodology/ auto roller, complete in all respect as specified and directed by Engr-in-Charge.
M&L for applying priming paint followed by two coat of internal emulsion paint, anti-fungal and anti-bacterial (Asian- Royale or equivalent of approved make as approved by GE) on wall surfaces using airless spray technology with max working presssure of 3300PSI and capable to operating single spray gun with max material whole length of 30mtr. The spray machine should be reported manufacturer with pro-gaurd technology and capability of tracking pressure and paint uses and certified by paint manufacturer and accesosries to be able to spray in hard to reach areas penetration of paint on the surface by smart periodical methodology/ auto roller, complete in all respect as specified and directed by Engr-in-Charge.
All as per ser item No.4 above but on ceiling surface.
M&L for preparation of old surfaces and applying one coat of plastic emulsion paint on walls by using smart periodical methodology complete all as specified and as directed by Engr-in-Charge
M&L for complete removal of existing treatment from old decorated walls by scraping with mechanical sander of asian paints trucare wall sander or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scarping tools where mechnical removal is not possible complete all as specified and directed by Engr-in charge and two coat of weather proofing exterior emulsion paint (Apex Ultima Luxury emulsion of Asian or equivalent of approved make as approved by GE) incl one coat of exterior primer up to 5 story bldg by using smart periodical methodology (spray machine) complete all as specified and directed. Note:- rate quoted up to G+4 bldg including scaffolding.
M & L for complete removal of existing treatment from old decorated wall surface scrapping by electrically operated grinder machine from decorated wall surface by scrapping and applying a coat of cement based wall care putty on complete surface and applying a roller texture finish of approved shade/colour/pattern/texture over incl a coat of oil based primer complete all as per specified and as directed.
M&L for preparation of old painted wood or wood based surface of any description over 10cm width or girth by removing all dirt,dust,rust and grease,stopping and filling the holes and patches the requisite surface and applying one coat of synthetic enamel paint by using smart periodical methodology/ auto roller, complete in all respect as specified and directed by Engr-in-Charge.
M&L preparation of old painted steel and iron surface of any description not otherwise described over 10 cm width or girth by removing all dirt,dust,rust and grease,stopping and filling the holes and patches and painting with one coat of synthetic enamel paint by using smart periodical methodology/ auto roller, complete in all respect as specified and directed by Engr-in-Charge.
M&L for preparation of old decoracted concrete surface by brooming and removing all loose layers of old treatment, efflorescence soot and moss by wire brush and filling all nails holes and patches with cement based wall care putty and applying one coat of synthetic enamel paint on old plastered surface in different colours such as PCC Kerbstones, footpath kerb, brick, concrete work etc by smart periodical methodology/ auto roller, complete in all respect as specified and directed by Engr-in-Charge.
M&L for preperation of pathway/flooring(over interlocking/chequired tile surface) or any type of surfaces old/new or any position by brooming and removing all loose layers of old treatment, efflorescence soot and moss by wire brush and applying one coat of floor paint of superior quality complete all as specified and as directed.
M&L preparation of old treated wooden surface and polishing melamine polish on the veneer and Burma teak wood including wood filler with two or more coats of polishing complete all as specified and as directed by Engr-in-Charge
Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc. and removal of debris out side of MoD Land complete in all respect as specified and directed by Engr-in-charge
M&L 15mm thick Ready mix cement plaster with bulk density 1.4 to 1.7 kg per ltr, water ratio 17 to 19% by weight with compressive strength as per IS 4031 part -VI on brick work or concrete surfaces of wall as per manufacturer instruction finished smooth and even complete all as specified and as directed
M&L 5mm thick Ready mix cement plaster with bulk density 1.4 to 1.7 kg per ltr, water ratio 17 to 19% by weight with compressive strength as per IS 4031 part -VI on brick work or concrete surfaces of ceiling as per manufacturer instruction finished smooth and even complete all as specified and as directed
M&L for preparation of newly plastered surface of wall and applying two coat of weather proofing exterior emulsion paint (Apex Ultima Luxury emulsion of Asian or equivalent of approved make as approved by GE) incl one coat of exterior primer by using smart periodical methodology (spray machine) complete in all respect as specified and directed by Engr-in-charge.
M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer by using smart periodical methodology (spray machine) complete all as specified and as directed by Engr-in-Charge
M&L for preparation of new plastered surface of ceiling and applying two coat of oil bound distemper by using smart periodical methodology complete in all respect as specified and directed by Engr-in-charge.
M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 (1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand:2 coloured marble stone chipping 10mm nominal size) including using Colour pigment & marble powder as required in ground in panels with groove all around as per approved pattern including scrubbing and washing the top layer with wire brushes and water to expose the stone chippings includind forming groove of uniform size 15mm wide and 15mm deep as per approved pattern complete all as specified and as directed.
Dismantling of wall and ceiling boards(fibre, pulp, insulation,etc) or insulation boards/slabs/blankets/,any thickness,incl cover fillets
S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as per specified and as directed.
S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. complete all as per specified and as directed.
Providing and fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) with semi perforated 12mm thick micro tegular edged false ceiling tiles of size 595 x 595mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 90%, NRCO 0.50 to 0.75 as per IS 8225:1987, Nocumbustible as per BS 476 (Part-4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspende on interlocking metal T Grid of hot dipped galvanised iron section of 0.33mm thick (Galvanised @ 120 Grams per sqm including both side) comprising of main T runners of size 15 x 32mm length 3000mm, cross T of size 15 x 32mm length 1200mm and secondary intermediate cross -T of size 15 x 32mm of length 600mm to form grid module of size 600 x 600mm, grid system hanges by 6 mm dia GI wire to purlin, trusses; RCC slab of the roof etc. with hold down clips, butterfly clips, height fixtures etc, Galvanised iron parimeter wall angle of soze 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per sepcifications, drawing and as per direction of Engineer-in-Charge.
S & F in repairs of 4mm th ACP( Al composite panel) cladding of approved quality and colours as approved by GE, Fixing in MS frame at any ht and incl MS frame of size n.exc 0.36 Sqm ( used in rectangular tubes of size 50.8mmx25.4mmx2.9mm th or square tubes 38mmx 38mm x2.9mm th are used in frame) and filling the joints with all weather silicon sealant incl all mouldings,cutting,etc complete all as specified and directed.
S&F factory made WPC railing combining WPC railing combining WPC Board/Fancy designer type grating and WPC frame 100% solid PVC (wood polymer composite) railing of required length and of 600 to 750 mm height, and 24 mm Thick compising of K- Value 58-60 (Suspension Grade) , Calcium carbonate and natural fibres (Wood Powder/rice husk/wheat husk) and Non toxic additives, made from single extrusion process, WPC foam board with having minimum density 650 Kg/cbm and WPC frame having minimum density 780 Kg/cbm manufactured by RAJSHRI an ISO 9001-2015 certified company, having a good screw holding capacity (Screw withdrawal strength of 2000 (Face) & 1100N (Edge), Minimum comprosing of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of speed of flame of Class A Category with property of being termite/ borer free water/ moisture proof and fire resistance. For WPC railing WPC Jalli to be fixed with WPC frame of size 75 x 50 mm with necessary supporting length at vertical as well as horizontal at wall frames to be fixed with (SS screws) on 40x 40 x5 mm MS equal angle iron frame including demolition of existing RCC Jallii with frame complete all as specified and directed. Note:- The said item shall be fixed over boundary wall/ roof tops and in any other position as required on site.
Dismantling wall tilling incl cement mortar bedding and rubbish off the premises complete all as specified as directed by Engr-in- charge
M & L for glazed coloured ceremic tiles in vertical surface 450x350x7/300x600x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface incl 10mm tk in cement mortar 1:4 even and fair for receiving tiles on vertical surface complete all as specified as directed by Engr-in- charge
S & F 10mm thick toughened glass as in partition / fixed window incl diamond edging all sided , attaching , lining and by sand blasting . Incl CP "L' or "U" heavy duty clamps suitable for fixing of glass , min 4 nos per Sqm all as specified and directed by Engr-in-charge.
S & F 10mm thick toughened frosted glass door shutters of size area exc 1.50 Sqm but n.exc 3 sqm incl necessary floor spring hydraullically regulated, otherwise fixed on pivot.CP fitting and fixtures , CP handles , CP locking arrangement , necessary cutting & holes moulding and fixed in complete as specified and directed by Engr-in-charge.
Taking down of Chowkhats or frames(without taking off shutters from frame)area not exc. 1.5sq. m each incl builders hardware fitting complete all as specified and as directed
Taking down of Chowkhats or frames(without taking off shutters from frame) area exc 1.5 sq. m but n exc 4 sq. m each incl builders hardware fitting complete all as specified and as directed
M & L for ceiling panels:- Pre- fabricated modular ceiling panels, 50mm th , with sloping panels PUF panels,between one sheets of 0.8mm & one sheet 0.5mm PPGI ( pre painted galvanized steel) having PUF density of 40kg/m3 with proper supports. Wall panels shall be fixed to the floor with channels & anchor fastners and interlocked with each other through CAM LOCK sys.Ceiling panels shall be supported with wall panels through L type flashing, CAM LOCK sys and ceiling support sys as required. Panels incl cut outs for lights, pendants, electrical switch sockets etc. Antibacterial& Antifungal paint coating supply and installation of jointless coating for wall ceiling and corner panels, filling of all joints and cavaties with metal epoxy fillar and sanded flush to provide a seamless finish incl one primer and three coats of antibacterial and anti fungal paint equivalent to a min dry film thickness of 300 micron including taking down of old unserviceable panel complete all as specified and as directed.( Paint- SKK Japan/acro/dulux)(PPGI sheet make- TATA steel/jindal/JSW ( Make- MHS/CHP/MR)
M&L for chipping of spalled and loose concrete and cleaning rust from reinforced by sand blasting scrubing down concrete surfaces with wire brushes cleaning with water allow to dry and applying a layer of Zn rich epoxy primer as an antirust on all exposed reinforcement followed by a layer of bounding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over steel welded mesh 2 mm dia of wire and apprature 75mm,total thickness of guniting n.exc 40mm(avg thickness) in cement mortar 1.2 using OPC 53 Graded cement mixed with polycreate mixture@2% by weight of cement or as per manufacture instrs and finally applying cement plaster over guniting surface of reqd thickness to give even uniform and smooth finishes confirming to proper geometrics in cement mortar 1:3 to match the existing surfaces as in sides ,soffits of the slabs,chajja,fins,fascia,parapet,lintels,column,and beam etc complete incl necessary scaffolding,shuttering,chasing to bk work or RCC memebers at G+4 storey building incl removal of all small trees/shrubs etc.complete as per directed by Engr-in-Charge.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials outside MOD land not less than 5 KM (As approved by local Municipal Authorities) by mechanical means including loading, transporting and unloading the same as per NGT & NDMC norms.
Shivam Firetech Engineers (BID ID -3442262)
S GOURAV PRAKASH ENTERPRISES (BID ID -3441983)
kailash chawla (BID ID -3433882)
M/S MSD & Associate (BID ID -3442357)
Vipul Construction (BID ID -3438588)
M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3431884)
M/S SIMRAN CONSTRUCTION CO (BID ID -3437325)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .