SMTC work for 04 nos of road for an aggregate length of 11.947 km under Jharsuguda (RandB) Division (Package-3) for the year 2026-27

NH-43 in Belpahar Town Portion Road from Km 244/450 Km to 250/000 Km

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. as per approved Drawing & Technical Specifications and as per Clause - 201 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Flank Dressing to Proper Camber

Providing and applying tack coat on the prepared bituminous surface with rapid setting bitumen emulsion (Grade R.S) as per approved drawing and technical specifications as per Section 900 and Clause 503 & 501.5.2 of MoRT&H Specifications for Road & Bridge work.

Cleaning the existing black topped surface with removal of foreign materials with brooms or soft brushes and finally dusting with old bags ans /or compressed air to receive bituminious surface.

Providing and laying bituminous macadam with 60-90 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction as per Clause 507 of MoSRT&H Specifications for Road & Bridge works (4th Revision)

Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects

Road Safety

Providing Road marking with Hot applied thermoplastic compound 2.5mm thick including reflecterising glass beads @250 grams per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC-35 and as per Clause No.803.1, 803.2, 803.4.1, 803.4.2, 803.4.4, 803.6 to 803.8 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (5th Revision) & including cost of all materials, labour, T&P, royalty etc complete in all respect and as per direction of the Engineer-in-charge.

Providing and fixing of direction and place Identification Signs more than 0.9 sqm. Size board retro-reflectorised, cautionary, mandatory and informatory sign as per IRC-67 made of high intensity grade sheeting vide clause 801.3 ,fixed over aluminium sheeting, 1.5mm thick supported on mild steel angle post 75m x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing .