Creation of 25 KVA Substation along with Its HT/LT network at Wani Mohalla Amda Kadal

Supply, installation, testing and commissioning of:

11/0.433kV, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, Aluminium wound, and with LV Cable Box having detachable Aluminium Gland plate. Transformer should have arrangement for vertical Take off

9 Mtr. Long Pole( ST-410 SP33) as per REC Standard

GI Channel 100x50x50x6 mm 9' long (2 No) duly fabricated as per site requirement & as per REC Standard .

GI Channel cross-arm (ISLC 75 designation) 75x40x40x6 mm 9' long (8No) duly fabricated as per site requirement & as per REC Standard .

GI Channel cross-arm (ISLC 75 designation) 75x40x40x6 mm 6' long (2 No) duly fabricated as per site requirement & as per REC Standard .

MS Angle iron braces (ISA 5050 designation) 50x50x6mm 6' long (6 No) duly fabricated as per site requirement& as per REC Standard .

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

Galvanized Nuts & Bolts & washers of sorts. (Galavinsied as per IS-2633/1986)

70 mm² Cable, 1.1kV Grade, XLPE Insulated Stranded Conductor FRLS type

Bi matellic Clamps19mm².

11KV 400 AMP Gang Operated switch gear

Drop-out set (Horn-gap type) as per REC standard F6

11KV Lighting Arrester Set (Station type) as per REC standard conforming to IS 3070 part -III and as per REC standard

63 amps TPN Switch Disconnector Fuse Unit

Single Phase Smart Energy Meter 5-30 Amp/10-60 Amp ;Three Phase Energy Smart Meter 20-80 Amp DLMS Complaint of accuracy class 1.0 (Whole Current Meters) along Polypropylene weather proof outdoor type Meter Box for Single/Three Phase Meter along with Zinc plated clamps

11KV pinwith insulators Brown glazed porcelain insulator confirming to IS-731/1971 Amendments 1 to 5 type B with 320mm minimum creepage distance and with lead/Zinc thimbles suitable for use with G.I forged pin having small steel heads as per IS-4l86 (P.I) 1993 and IS-2486 (P.II)1989 and revision with latest amendments if any as per REC Standard C-1

Supplying and erection of Danger Plates with clamps with writing in English and Regional Language

Earthing Complete by GI Pipe 40 mm 3 mtr long through GI Strip25x3 mm

Earthing insulating boots

Providing, Erection, testing & commissioning of MS Angle iron for Transformer Belt (ISA 5050 designation) 50x50x6mm 10' long duly fabricated as per site requirement and painted with two coats of Red oxide and Al. Paint as per REC Standard

GI wire for Anticlimbing Device as per REC Standard

Sign Board

Supply and laying of Cement bottoming 1:2:4 mix as per REC standards 0.50 cum/pole, muffing 20 cm above ground level ,including plaster and curing of concrete in size of 600x600x1700mm for 9 mtrs Long ST Poles (410, SP-33) (the leftover pit after concreting to be filled with soil and boulders)

Supply and painting of each Pole 1 coat red oxide paint and 2 coats of aluminium paint (@ 1 ltr/pole red oxide paint and 1 ltr/pole aluminium paint)

Supply, installation, testing and commissioning of:

9 mts steel tubular pole post 410 (SP-33) IS 2713 (part-II) 1990 as per REC Standard

11KV 400 AMP Gang Operated switch gear

GI Channel cross-arm 75x40x40x6 mm 9' long (1No) duly fabricated as per site requirement & as per REC Standard .

GI Angle iron braces 50x50x6mm 6' long (3No) duly fabricated as per site requirement and as per REC Standard

Galvanized Nuts & Bolts & washers of sorts. (Galavinsied as per IS-2633/1986)

Supplying and erection of Danger Plates with clamps with writing in English and Regional Language

Earthing Complete by GI Pipe 40 mm 3 mtr long through GI Strip25x3 mm

35 mm ²Ab cable as per REC Standard.

35 mm ²Ab cable kit

Pole clamps fabricated out of MS channel

Cement bottoming 1:2:4 mix as per REC standards 0.50 cum/pole, muffing 20 cm above ground level ,including plaster and curing of concrete in size of 600x600x1700mm for 9 mtrs Long ST Poles (410, SP-33) (the leftover pit after concreting to be filled with soil and boulders)

painting of each Pole 1 coat red oxide paint and 2 coats of aluminium paint (@ 1 ltr/pole red oxide paint and 1 ltr/pole aluminium paint)

Supply, installation, testing and commissioning of:

8 Mtr. Long ST Poles (410 SP15) with pit excavation

50 mm ²ACSR as per REC Standard. Conductor(Rabbit) IS 4826/1979 and laid as per REC standard

Cement bottoming 1:2:4 mix as per REC standards 0.45 cum/pole, muffing 20 cm above ground level ,including plaster and curing of concrete in size of 600x600x1700mm for 8 mtrs Long ST Poles (410, SP-15) (the leftover pit after concreting to be filled with soil and boulders)

Earthing Complete by GI Pipe 40 mm 3 mtr long through GI Strip25x3 mm

Galvanized Nuts and Bolts of sizes.

painting of each Pole 1 coat red oxide paint and 2 coats of aluminium paint (@ 1 ltr/pole red oxide paint and 1 ltr/pole aluminium paint)

LT Shackle insulators as per REC standard

MukKI Clamps fibricated out of 50x8 mm flat iron of appropiate size and specification for holding LT Shackle insulators.

M/S MUAZAM ELECTRICALS

M/S KHAN ENTERPRISES

M/S QADRI ELECTRICALS

M/S ROYAL ELECTRICAL MECHANICAL and SUPPLIERS