RESURFACING OF DOUBLE ROADS IN FRONT OF MAIN GATE SUKHOI ENGINE DIVISION TO ADMIN CIRCLE AND CONNECTING AREAS.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete as per specification and direction of Engineer In Charge.

Supplying at site welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately) etc. all complete as per specification and direction of Engineer In Charge.

Painting with synthetic enamel paint with two or more coats on new work on steel surface of approved brand and manufacture of required colour to give an even shade with preparation of surface etc. all complete as per specification and direction of Engineer In Charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding

Registration, HSN / SAC Code & GST Rate

Invoicing & Payment

Input Tax Credit

Penalty for Non-compliance of GST Act

Anti-profiteering Measure .

Other Provision

Allottment of quarters

DSR Ref. No.

Providing and painting two or more coats white washing with lime to give an even shade over old work on wall and ceiling in all heights with preparation of surface by using wire brush, sand / emery paper, removal of scale and rust etc. all complete as per specification and direction of Engineer In Charge.

One or more coats painting with synthetic enamel paint brick, stone, concrete, asbestos cement or plaster surface, steel surface, wooden surface etc. of approved brand and manufacture of required colour to give an even shade with preparation of surface etc. all complete as per specification and direction of Engineer In Charge.

Two or more coats painting with synthetic enamel paint brick, stone, concrete, asbestos cement or plaster surface, steel surface, wooden surface etc. of approved brand and manufacture of required colour to give an even shade with preparation of surface etc. all complete as per specification and direction of Engineer In Charge.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour with preparation of surface etc. all complete as per direction of Engineer in charge.

Supplying, carrying to site all approved materials, providing two coats of chlorinated rubber base paint painting in lines, dashes, arrow etc. on roads or passages on shop floors. The rate also includes for clear finishes such preparation of old painted surface, cleaning, stopping and rubbing down after each coats, stopping as specified etc. all complete as per direction of Engineer in charge.

Plastering with 12 mm cement plaster of mix in cement mortar 1:4 (1 cement: 4 fine sand) in brick work, concrete work or any other surface etc. all complete as per specification and direction of Engineer In Charge.

Providing and laying in position cement concrete of 1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources excluding the cost of centering and shuttering - All work up to plinth level etc. all complete as per specification and direction of Engineer In Charge.

Finishing walls with one or more coats with Premium Acrylic Smooth exterior paint with Silicone additives of required shade over existing cement paint surface i.e brick, stone, concrete, asbestos cement or plaster surface @ 0.83 ltr/10 sqm) with preparation of surface etc. all complete as per specification and direction of Engineer In Charge.

Finishing walls with two or more coats with Premium Acrylic Smooth exterior paint with Silicone additives of required shade on old work applied @ 1.43 ltr/ 10 sqm over existing cement paint surface i.e brick, stone, concrete, asbestos cement or plaster surface with preparation of surface etc. all complete as per specification and direction of Engineer In Charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete etc. all complete as per direction of Engineer in charge.

One or more coats on old work painting with aluminium paint of approved brand and manufacture to give an even shade with preparation of surface etc. all complete as per direction of Engineer in charge.

Painting runway/taxi track/apron marking with Two or more coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign material etc. and lining out etc. all complete as per direction of Engineer in charge.

Registration, HSN / SAC Code & GST Rate

Invoicing & Payment

Input Tax Credit

Penalty for Non-compliance of GST Act

Anti-profiteering Measure .

Other Provision

Allottment of quarters

RESURFACING OF DOUBLE ROADS IN FRONT OF MAIN GATE SUKHOI ENGINE DIVISION TO ADMIN CIRCLE & CONNECTING AREAS.

KPTCC/W/565

EXPERIENCE DETAILS

ONE WORK OF 80% VALUE ( IN LAKHS)

ISSUING AGENCY/ AURHORITY

TWO (02) WORKS OF 50% VALUE EACH ( IN LAKHS)

ISSUING AGENCY/ AURHORITY

THREE (03) WORKS OF 40% VALUE EACH ( IN LAKHS)

ISSUING AGENCY/ AURHORITY

DETAILS OF SOLVENCY CERTIFICATE

CERTIFICATE NO.

RESURFACING OF DOUBLE ROADS IN FRONT OF MAIN GATE SUKHOI ENGINE DIVISION TO ADMIN CIRCLE & CONNECTING AREAS.

KPTCC/W/565

EXPERIENCE DETAILS

ONE WORK OF 80% VALUE ( IN LAKHS)

ISSUING AGENCY/ AURHORITY

TWO (02) WORKS OF 50% VALUE EACH ( IN LAKHS)

ISSUING AGENCY/ AURHORITY

THREE (03) WORKS OF 40% VALUE EACH ( IN LAKHS)

ISSUING AGENCY/ AURHORITY

DETAILS OF SOLVENCY CERTIFICATE

CERTIFICATE NO.

RESURFACING OF DOUBLE ROADS IN FRONT OF MAIN GATE SUKHOI ENGINE DIVISION TO ADMIN CIRCLE & CONNECTING AREAS.

KPTCC/W/565

EXPERIENCE DETAILS

ONE WORK OF 80% VALUE ( IN LAKHS)

ISSUING AGENCY/ AURHORITY

TWO (02) WORKS OF 50% VALUE EACH ( IN LAKHS)

ISSUING AGENCY/ AURHORITY

THREE (03) WORKS OF 40% VALUE EACH ( IN LAKHS)

ISSUING AGENCY/ AURHORITY

DETAILS OF SOLVENCY CERTIFICATE

CERTIFICATE NO.

DSR Ref. No.

Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface etc. as per specifications and direction of Engineer In Charge.

Providing and laying Bituminous concrete 40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.

Earth work by mechinical / manual means in rough excavation in all kinds of soil, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift as per specifications and directions of Engineer-in-Charge.

Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. as per specifications and directions of Engineer-in-Charge.

Registration, HSN / SAC Code & GST Rate

Invoicing & Payment

Input Tax Credit

Penalty for Non-compliance of GST Act

Anti-profiteering Measure .

Other Provision

Allottment of quarters